東邦インターナショナル List of Products and Services

Introduction to the Lamnea Pre-Feeding Machine! Lamnea, a Swedish company, is a top manufacturer in the industry that produces processing equipment for wire production, as well as conveying devices for feeding and winding. In wire drawing processing, wire is passed through a die to be thinned out, and this pre-feeding machine is used to prepare for that process. By crushing the wire thinly with rolls mounted on the device, it becomes possible to pass it through the die. The small models, LPM Roller Type Pre-Feeding Machines, include three models: LPM3.5-0.6, LPM5.35-0.8, and LPM8-1. They feature a welded frame structure that allows for smooth pre-feeding. The frame is equipped with casters for easy movement. The rollers are mounted on a base that allows for tilt adjustment, enabling you to set them at your preferred angle for use. The model LPM15-4 is designed for larger diameter wires that require high roundness and surface condition. The pre-feeding rollers rotate during the 123-degree pre-feeding process, so the operator does not need to manually rotate the wire. This pre-feeding machine accommodates both high-carbon and low-carbon wires. #Wire #Pre-Feeding Machine #Feeding Machine #Pointing Machine #Pointing Machine

• Plastic processing machines (cutting and rolling)
• Other processing machines

Used in the extrusion process of the cable and wire industry, it is particularly suitable for inline temperature management after the preheater. It has received positive feedback for preheating measurements ranging from 0.3 to 5.0 mm.

• Radiation thermometer

The "Moviroll Roll Pusher (Battery Type)" is a bobbin rolling device that excels in improving productivity and safety. By using rollers of various sizes, it allows for easy and safe transportation of bobbins and similar items to shuttle carts. It is suitable for transporting tissue paper rolls, wires, cable reels, drums, and vehicles, and can also be used for industrial applications. 【Features】 ■ Excellent in improving productivity and safety ■ Safely transports bobbins and similar items to shuttle carts ■ Usable for transporting vehicles and in industrial applications ■ A wide range of models available (pneumatic type and battery type) ■ Comprehensive support from planning to manufacturing and assembly *For more details, please refer to the PDF materials or feel free to contact us.

• Transport and handling robots
• Other conveying machines

The "Moviroll Roll Pusher (Air Pressure Type)" is a bobbin rolling device that excels in improving productivity and safety. By using rollers of various sizes, it can easily and safely transport bobbins and similar items to a shuttle cart. It is suitable for transporting tissue paper rolls, wires, cable reels, drums, and vehicles, and can also be used for industrial applications. 【Features】 ■ Excellent in improving productivity and safety ■ Safely transports bobbins and similar items to a shuttle cart ■ Usable for transporting vehicles and in industrial applications ■ A wide range of models available (air pressure type and battery type) ■ Comprehensive support from planning and manufacturing to assembly *For more details, please refer to the PDF document or feel free to contact us.

• Transport and handling robots
• Other conveying machines

Proton's preheater is a device that performs preheating before the cable extrusion process! 【Features】 - The members who developed and sold the preheater to the world for the first time continue to make minor changes every year, resulting in a reliable preheating system and a robust preheater. - It follows the line speed, maintaining a constant preheating temperature. - A wide range of options is available, accommodating wire sizes from ultra-fine φ0.2mm to power cables φ6mm. - Customization is possible to suit any application, with models available not only for copper but also for aluminum and steel.

• cable
• Extrusion Machine

☆ The TONS from Shogren uses two jaws (claws) and the power of springs to clamp the wire without using a "wedge." ☆ It allows for safe loading operations without relying on the experience of the operator. ☆ Using it in conjunction with a spring-loaded safety chain further enhances safety. Features ■ Safe because the operator can load without placing hands or fingers near the mechanism! ■ Safe because the operator can work from outside the safety measures! ■ Safe because there is no need to drive in a wedge with a hammer! ■ Safe because the chain can be lightly stretched by hand and temporarily secured with the spring tension! ■ Safe because the safety chain prevents the wire from flailing even if it comes loose! * For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

In addition to drawing, twisted, and compression dies, we also handle guide dies for molten plating. Features: - Available in natural (ND), synthetic single crystal (AD), and synthetic polycrystalline (SD). → We can provide a piece that meets your needs! - Uniform thickness for plating. → Solves the issue of variation in plating thickness and increases productivity! - Uses a corrosion-resistant, buoyant titanium case. → Lasts long even when submerged for extended periods! Due to its good buoyancy, it can be easily located within the tank! - Custom case orders are also accepted. → We can accommodate custom cases with FWWD's unique know-how! For inquiries regarding hole diameter tolerances, case sizes, etc., please feel free to contact us!

• Dice

▼ What is a nano-diamond coated die? ▼ Numerous achievements with copper and aluminum wires! A die coated with ultra-fine particle diamond on a carbide nib. It has a longer lifespan compared to carbide dies and can reduce costs compared to SD dies! It is suitable for twisting and compression applications!

• Dice

【Features】 ◇ Can join copper and aluminum twisted wires ◇ No advanced skills required for operation, allowing for short welding cycles ◇ A robust and durable device with a simple machine design and intuitive operation ◇ Welding conditions such as the distance of current flow (amount of wire melted), spring pressure, and jaw spacing can be individually set ◇ Can weld cleanly without burrs inside sleeves made of glass, ceramic, or graphite ◇ We also conduct welding of customer samples at IDEAL's headquarters.

• Non-ferrous metals

This is the iiM Corporation cable stripper CS100. It allows for easy stripping of cables that require high pulling force! ◆ Compatible wire diameter: φ15-100mm

• Other measurement, recording and measuring instruments

This is a kit for hot set testing/thermogravimetric testing. ✓ A thermometer can be installed near the sample! ✓ Easily attach the case with clips by placing the appropriate weights inside! ✓ Up to 3 samples can be measured simultaneously! ✓ A sturdy and compact test kit and case. ~Options~ ◆ Laser gauge ◆ Heating oven ◆ Heat oven

• Other machine elements
• Other cable related products

Air Control Industry Ltd. (UK) is a designer and manufacturer of air-operated industrial products, and is a globally renowned specialist company. With over 50 years of history and experience in air knife systems, we manufacture products that perform drying, cooling, and cleaning necessary in the conveying process. The reputation for high-quality products has led to increased demand from the wire and cable industry, resulting in the development of the "Cable Dryer." It can dry the surface of round and flat cables with a wire diameter ranging from 0.2 to 65 mm at a maximum speed of 1200 m/min during the extrusion process. The "Cable Dryer" does not require air from a compressor, significantly improving drying efficiency while reducing energy and water consumption, and it operates at a low noise level. Additionally, another product, the "Profile Dryer," can perform surface drying on rubber, silicone seals, and asymmetrical resin extrusions with complex shapes without causing distortion.

• Extrusion Machine
• Other processing machines
• Non-ferrous metals

Air Control Industry Ltd. (UK) is a designer and manufacturer of air-operated industrial products, renowned globally as a specialist company. With over 50 years of history and experience in air knife systems, we produce products that perform drying, cooling, and cleaning necessary in the conveying process. Our reputation for high-quality products has led to increased demand from the wire and cable industry, resulting in the development of the "Cable Dryer." It can dry the surface of cables with round or flat shapes and a wire diameter ranging from 0.2 to 65 mm at a maximum speed of 1200 m/min during the extrusion process. The "Cable Dryer" does not require air from a compressor, significantly improving drying efficiency while reducing energy and water consumption, and it operates at a low noise level. Additionally, another product, the "Profile Dryer," can dry the surfaces of rubber, silicone seals, and asymmetrical resin extrusions with complex shapes without causing distortion.

• Extrusion Machine
• Resin processing machine
• Other processing machines

This is the SC-PE splitting cutter for test sample preparation made by iiM in Germany. ■ It complies with IEC60811-511 and 507, allowing the creation of tensile test samples and dumbbell test pieces under cold and hot conditions. ■ Slices hard materials such as polyethylene and cross-linked polyethylene cables! 【Features】 ✓ Easily and safely slices hard materials like polyethylene and cross-linked polyethylene ✓ Compact tabletop design ✓ Creates sheets in the range of 0.8 to 2.0 mm

• Other machine elements
• Other cable related products

■Compliant with IEC60811-511 and 507, it can create tensile test samples and dumbbell test pieces at both cold and hot temperatures. Features ✓ Compact tabletop model ✓ Sheet creation in the range of 0.8 to 2.0 mm ⚠ For slicing hard materials such as polyethylene and cross-linked polyethylene, please refer to the splitting cutter SC-PE.⚠

• Other machine elements
• Other cable related products

This is the ORC 150 from iiM Corporation's ORC series of cross-section measurement cable slicers. 【Specifications】 Compatible outer diameter: 20 to 150 mm. *Can be adapted for up to 200 mm as an option. 【Features】 ■ Achieves smooth surface measurement sample creation ■ Fixed slicing on a rotating table ■ Quickly and easily creates samples ■ Reduces variability in samples produced by operators ■ Four models available to match size and characteristics ⚠ When slicing cables, always insert them into the device without the conductor. ⚠

• Other measurement, recording and measuring instruments

This is a slicer for creating samples to measure the cable cross-section thickness from iiM Corporation, Germany. 【Specifications】 - Compatible outer diameter: 8 to 80 mm. - Suitable for slicing hard materials such as PE. - Can slice fan-shaped cables. 【Features】 - Achieves smooth surface measurement sample creation. - Fixed on a rotating table for slicing. - Quickly and easily creates samples. - Reduces variability in samples created by operators. - Four models available to match size and characteristics. ⚠ When slicing cables, always insert them into the device without the conductor. ⚠ *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments

This is the ORC 65 from iiM Corporation's ORC series of cross-section measurement cable slicers. 【Specifications】 - Compatible outer diameter: 6 to 65 mm - Suitable for slicing soft materials such as PVC. 【Features】 - Achieves smooth surface measurement sample creation - Slices while fixed on a rotating table - Quickly and easily creates samples - Reduces variability in samples created by operators - Four models available to match size and characteristics ⚠ When slicing cables, please ensure that the conductor is removed before inserting it into the main unit. ⚠ *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is the ORC Micro from iim Corporation's ORC series of cross-section measurement cable slicers. 【Specifications】 Compatible outer diameter: 0.5 to 3.5 mm. 【Features】 ■ Achieves smooth surface sample creation for measurement ■ Slices by fixing to a rotating table ■ Quickly and easily creates samples ■ Reduces variability in samples created by operators ■ Four models available to match size and characteristics ⚠ Custom-made dies (fasteners) for fixing samples will be manufactured for each cable outer diameter. ⚠ ⚠ When slicing cables, please ensure that the conductor is removed before inserting it into the main unit. ⚠ For slicing cables with an outer diameter of 3.5 mm or more, please refer to the link on the special feature page below.

• Other measurement, recording and measuring instruments

The "Combi 490" is a high-precision handheld tension meter with an accuracy of ±0.5%. It can measure up to 2,000N, making it ideal for thick cables and materials with high loads. Its portability means that having one unit per line allows it to be used in various locations! - Custom rollers can be ordered, allowing measurement of any object, whether wire, cable, or sheet! - Calibration is very simple and can be done in three steps! - Visualization of the production process enables standardization of manufacturing. - The wide pitch of the rollers minimizes the tendency of the wire to become deformed. 【Applications】 Production management... Digitally quantifying the tension applied during manufacturing. Before twisting process... Preventing twisting collapse due to wire sag. Before heat treatment... Checking in advance whether the tension is optimal to prevent elongation and thinning after heat treatment. Plating process... Without tension management, the plating can become uneven after the process.

• Other weight measuring instruments

Non-contact laser Doppler speed and length measuring instrument manufactured by Proton, UK ◇ Measurement accuracy: ±0.05% (minimum measurement line diameter 0.4mm) with high precision ◇ Repeatability: ±0.02% Compliant with RoHS regulations as of April 2013. Widely adopted by major wire manufacturers. Demo units available! We will come to demonstrate anywhere in Japan.

• Distance measuring device
• Electrical Instruments/Electrometers
• Other measurement, recording and measuring instruments

We offer the "Test Wire Drawing Agency Service" from Izumi Dais Co., Ltd. We can accommodate various wire drawing conditions, including die drawing, roll drawing, hot working, cold working, and atmospheric conditions. So far, we have experience in wire drawing with rare metals, precious metals, and alloys. If you would like to try a very small amount of wire drawing during the research phase or if you are having difficulties with wire drawing, please feel free to contact us. 【Features】 ■ Equipped with wire drawing facilities for research and development ■ Capable of drawing very small amounts (starting from 50g) on a trial basis ■ Able to accommodate various wire drawing conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

The "Reverse Vendor Model 310" is a mechanical descaler that maximizes descaling effects through its simple and sturdy design. It effectively removes oxide coatings using a wire bending method developed in the United States. The compact body allows for installation without changing the layout or moving the wire drawing line. 【Features】 ■ Effectively removes oxide coatings ■ No power supply required, only two types of consumable parts ■ Cost-effective ■ Built-in scale dust box ■ The entry section has four guide rollers, both vertically and horizontally, to assist with wire entry *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other processing machines

The "SEZ Series" is an inline belt-type descaler that can handle various scales of removal. It also addresses scales and rust that cannot be removed with brushes. In addition, we offer the rinsing and coating unit model "HSBE-3201," which performs high-temperature rinsing and coating treatment for wire rods with a maximum diameter of 14mm. 【Features】 ■ Transition from acid cleaning to mechanical descaling ■ Use for surface polishing to improve the quality of low-cost rods ■ High-speed operation made possible by inline configuration ■ Eco-friendly ■ Low production costs and easy management *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other processing machines

At Toho International, we handle the 'Automatic Coiler' manufactured by Windak. The "FC-Flex Coiler" can coil products of a wide range of sizes with a single device. The "QP-Quick Pack" supports high-speed coiling of more than 8 coils per minute. Thanks to the unique and patented coil system's stretch wrap, it is possible to run products of a wide size range on the same coiler. 【Features】 ■ FC-Flex Coiler - Can coil products of a wide range of sizes with a single device ■ QP-Quick Pack - Supports high-speed coiling of more than 8 coils per minute *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

This catalog introduces the products of Tensionmetric, which are handled by Toho International Co., Ltd. It features products such as the easily installable "Single Point Roller System," "Friction Meter," and "Tension Meter compatible with four measurement ranges." Please use this for selecting products. [Contents (Excerpt)] ■ Single Point Roller System ■ Three Point Roller System ■ Tension Measurement with Hand Type ■ Measurement System for Twisting Machines (Patent Held) ■ Friction Meter *For more details, please refer to the PDF document or feel free to contact us.

• roller
• Other measurement, recording and measuring instruments

This catalog is a comprehensive catalog featuring products from Taymer, handled by Toho International Co., Ltd. It includes devices such as the "Surface Defect Detection Device," which contributes to zero defective product leakage, the "Printing Verification Device," which can automatically verify and manage the quality of printing on high-speed production lines, and the "High-Speed Kobb Inspection and Outer Diameter Measurement Device," which can accommodate up to 3,000 m/min. [Contents (excerpt)] ■ Surface Defect Detection Device (SI3100/SI4100) ■ Medical Surface Defect Detection Device (SI3100-MED) ■ Printing Verification Device (PV1400) ■ Cable Surface Color Identification Device (CV2000) ■ Flat Ribbon Cable Inspection Device (RI2400) *For more details, please refer to the PDF document or feel free to contact us.

• Defect Inspection Equipment
• Visual Inspection Equipment
• Other inspection equipment and devices

What is important in a straightening machine is the alignment of the roller grooves. Shogren's straightening machines are particular about the precision of the roller groove alignment. We can propose suitable models tailored to the material and requirements, regardless of whether it is iron, non-ferrous metals, or stainless steel. Our machines are used by a wide range of manufacturers, not just wire and cable manufacturers. Features: - Various groove processing options are available, including V grooves, U (R) grooves, and flat square grooves. - We can propose suitable models based on the material and condition of the wire. - Our experienced staff can provide solutions to any issues you may have with straightening. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

At Toho International, we handle the 'Dry Nugget Machine' manufactured by MG Recycling, which is compact, efficient, and highly accurate due to patented technology. Despite its compact design, it efficiently recovers fine metals such as copper and aluminum from cables and scrap materials. Maintenance is very easy, and the mechanism has a small number of consumable parts, making it excellent in terms of running costs. 【Features】 ■ Compact, high-efficiency, and high-precision due to patented technology ■ Environmentally friendly dry system ■ Customization options allow for expansion of processing capacity and sorting types ■ Easy maintenance ■ Good running cost performance *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

The "Lubricant 3-Point Compression Roller" can attach a larger amount of lubricant to the surface of wire during the drawing process, increasing the productivity of the drawing operation! It can be used immediately by simply placing it in the lubricant box of a dry continuous drawing machine. To maximize the lubricating effect, it is recommended to use it in the initial lubricant box. 【Features】 ■ Easy installation ➔ Just install it in the lubricant box, and it's ready to use! ■ Improved lubrication ➔ The three-point rollers efficiently attach lubricant to the wire! ■ Increased drawing speed ➔ By effectively attaching the lubricant, it reduces die wear and increases drawing speed, boosting production! ■ Available for purchase from just one part ➔ You can purchase springs, rollers, or even just one item from within the roller! ■ Regarding usage ➔ We have posted a video of the usage, so please check it out! (It lasts 14 seconds!) *For more details, please refer to the PDF document or feel free to contact us.

• roller

The filter paper specifically designed for the Resy Corporation's "Lubricant Filter Device" is a 3D-structured filter paper specialized for the removal of wire drawing debris generated during the wire drawing process. Unlike conventional 2D structured filter papers, it significantly reduces the loss of copper powder (aluminum powder). **Benefits of Proper Lubricant Filtration:** - Reduction of wire breakage - Decreased frequency of wire drawing die replacements - Reduction of downtime due to wire breakage and die replacements - Increased wire speed - Improved wire quality - Reduction in lubricant usage We offer three types of filter paper—HP40, HP70, and HP100—tailored to the flow rate of the lubricant, and we can provide recommendations for the optimal filter paper as well as sample testing. Additionally, we also sell the lubricant filter device itself. Please feel free to consult with us.

• Other filters

This product can improve winding quality by utilizing a shaftless precision winding device. This feature includes a 180° reversible guide arm and a system that can monitor the winding state. While being wound onto the reel, the guide arm remains in a fixed position, aligning the winding while maintaining a uniform winding angle and tension as the reel traverses. 【Features】 ■ High-speed response ■ Accurate alignment winding of wires without crossing ■ Can be integrated into existing production lines ■ Can also be used as part of a rewinding line ■ Reduces hand coiling work by skilled workers, minimizing the risk of product damage during winding and payout processes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "PCU 7-30" is an automatic alignment winding device that uses unique technology on high-speed lines. It accommodates wire diameters ranging from 7 to 30 mm. It detects the flange of the drum and automatically performs the appropriate turn. Thanks to the aligned winding, the products can be utilized as final products with a neat finish, without causing damage to the cables during installation or use, and can be supplied at the maximum possible supply speed. 【Features】 ■ Safety ■ Short payback time ■ No cable crossing ■ Uniform alignment ■ No rewinding *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "PCU 30-60" is an automatic alignment winding device for 30-60mm that eliminates the need to manually guide the wire during winding, enhancing safety. By properly positioning products such as cables, wires, and plastic tubes, it ensures a uniform winding pattern without vertical overlaps or gaps during the winding process. Additionally, it eliminates the need for personnel to monitor winding errors on the reel, as it manages and controls the tension to ensure that products are properly aligned horizontally. 【Features】 ■ Safe ■ Can wind without crossing ■ Unique and excellent design ■ Fast and high quality ■ Increased amount of product that can be wound onto the drum *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "PCU 7-20" is an automatic alignment winding device for wires ranging from 7 to 20 mm. It monitors and controls the tension of the most recently wound wire, ensuring that the wire tension is evenly distributed at both ends of the coil during winding. The sensor detects the flange of the reel, and when the wire reaches the flange, the direction of the traverse is changed. 【Features】 ■ No manual labor required ■ Safe ■ Increased efficiency ■ Capable of aligned winding without crossing *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

In a hydrogen atmosphere bell-type annealing furnace, various cycle times can be shortened, and the control of sealed hydrogen gas within the device can be achieved for processes such as oxide reduction, immersion, spheroidization treatment, and cooling. (RAD-CON AC/APEx, patented) Additionally, while conventional devices take a long time to reach the dew point, the time for oxide reduction can be minimized, and the immersion process can be shortened by a convection system that delivers heat to the vicinity of the rods. By maintaining the rod temperature nearly constant, the spheroidization process is shortened, and heat removal from the rods is performed more quickly. 【Features】 ■ Shortened cycle time ■ Improved wire surface ■ Suppression of oxygen removal process ■ Shortened spheroidization process ■ Prevention of decarburization ■ Existing nitrogen-type bell annealing furnaces can also be modified to hydrogen type *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "RSC NG (New Generations)" is a powder electrostatic coating device suitable not only for single-core wire cables but also for multi-core wire cables. The built-in powder tank has micro-vibrations and small air holes, making it difficult for the powder to clump together, allowing it to be supplied to the powder gun in good condition. The powder itself is electrostatically charged and can be applied uniformly. Compared to conventional models, the compressed air consumption is reduced to one-third, featuring an energy-saving design. Additionally, it is designed with consideration for the working environment and the safety of the operator, ensuring that even if the door is slightly opened during spraying, powder does not scatter around. 【Features】 ■ High speed and uniformity ■ Improved quality ■ Increased work efficiency ■ Adjustable to apply a uniform amount according to the target object ■ Independent powder chamber also available *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• others

Wire bobbins, paper rolls, cable reels, and drums can be transported easily. It can also be used for industrial applications. The 'Moviroll Roller Pusher' is an excellent bobbin rolling device that enhances productivity and safety. <Proven track record in wire and cable industries and paper industries worldwide> By using rollers of various sizes, heavy bobbins can be transported safely and easily within the factory. 【Features】 ■ Excellent in improving productivity and safety ■ Safely transports bobbins to shuttle carts ■ Equipped with long-lasting lithium-ion batteries ■ Usable for transporting vehicles and industrial applications ■ A wide range of models available (pneumatic type and battery type) ■ Comprehensive support from planning to manufacturing and assembly *For more details, please refer to the PDF document or feel free to contact us.

• Transport and handling robots
• Other conveying machines

The "DELTA EVO V" is an enamel coating device manufactured by NUOVA TECNO TAU, a specialized manufacturer of enamel coating technology. It meets stringent contamination standards applicable worldwide and also achieves a reduction in electrical energy consumption. The lineup includes copper wire "EVO V 70," as well as "EVO V 150," and aluminum wire "EVO V 100 AL," among others. 【Features】 ■ Complies with stringent contamination standards applicable worldwide ■ Reduction in electrical energy consumption ■ An evolved version of "DELTA V" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DELTA EVO H" is an enamel firing furnace manufactured by NUOVA TECNO TAU, a specialized manufacturer of enamel firing equipment and technology. It is an evolved version of the "DELTA H." By redesigning the catalyst box, which now features a new catalyst plate called ECOPLATE, this advancement has been achieved. Additionally, it offers a lineup that includes copper wire "EVO H 16," "EVO H 20," and aluminum wire "EVO H 30 AL." 【Features】 ■ Complies with strict pollution standards applicable worldwide ■ Reduction in electrical energy consumption ■ An evolved version of "DELTA H" Operation can be performed intuitively, and the installed PC allows for recipe registration of manufacturing processes (temperature, wind speed, etc.) for each type of product. Manufacturing data is displayed clearly in charts, and the temperature and wind speed at various locations during production can be monitored on the screen. Manufacturing data can also be automatically saved daily, making it useful for development and later analysis. Notably, not only the manufacturing history but also all operational history is saved, allowing for tracking who made changes to the settings and what errors occurred, all recorded as part of the history.

• Other machine elements

The "DELTA EVO FLAT" is an enamel firing furnace manufactured by NUOVA TECNO TAU, a specialized manufacturer of enamel firing equipment and its technology. It achieves minimal power consumption with its innovative Delta machine line. The lineup includes models such as "EVO 100," "EVO 75," "EVO 50," and "EVO 50D." 【Features】 ■ Complies with strict contamination standards applicable worldwide ■ Reduction in electrical energy consumption ■ An evolved version of "DELTA FLAT" Operation can be performed intuitively, and the installed PC allows for recipe registration of manufacturing processes (temperature, wind speed, etc.) for each type of product. Manufacturing data is displayed clearly in charts, and temperatures and wind speeds at various locations during production can be monitored on the screen. Manufacturing data can also be automatically saved daily, making it useful for development and later analysis. Notably, not only the manufacturing history but also the operation history is fully saved, allowing for tracking who made setting changes and what errors occurred, all recorded as part of the history.

• Other machine elements

This is an electric power tool that allows for safe, easy, and quick processing of leftover and scrap wires! Blade replacement is also possible.

• Other machine elements
• Other cutting tools

The "Magnet Brake" is a non-contact variable torque control device that is ideal for tension control and more. 1. Non-contact structure eliminates the need for external power and wiring. The basic configuration consists of two magnets and one hysteresis plate, which is fixed to the shaft. 2. The permanent magnets used in the brake are manufactured in-house, resulting in minimal individual variation and stable quality! 3. Tension control can be easily achieved, and since external power and wiring are not required, energy savings are realized! Torque range: We offer a wide variety of sizes and models from 0.0003 to 7.9 N/m. [Contents] ■ Magnet Brake MTL Series ■ Constant Tension Type Brake ■ Capper Magnet Brake ■ First Lock *For more details, please refer to the PDF document or feel free to contact us.

• brake
• Brake parts
• Other machine elements

The "ES-H" is a specialized manufacturer of enamel firing equipment and its technology, featuring a multi-line horizontal enamel firing device produced by NUOVA TECNO TAU. It combines the advantages of both single-line and multi-line systems. It allows for precise reduction of power consumption, and in the event of a disconnection on one line, it ensures that the quality of the other lines is not affected. 【Features】 ■ Designed to achieve a reduction in production costs ■ Airflow is divided, with each having its own individual path to the enamel firing tank ■ Combines the advantages of both single-line and multi-line systems ■ Allows for precise reduction of power consumption ■ Ensures that the quality of other lines is not affected in the event of a disconnection on one line *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog is a comprehensive catalog featuring products from Proton Corporation handled by Toho International. It includes a wide range of products, starting with the significantly miniaturized "SL mini/SLR mini series," as well as the spark tester "ST1525-HF series." As a manufacturer of measuring instruments for the cable industry, we provide solutions that enhance our customers' production capacity and efficiency. [Contents] ■ Non-contact speed and length measuring instruments ■ Outer diameter measuring instruments ■ Spark testers ■ Preheaters (for copper and aluminum) ■ Non-contact infrared thermometers ■ Contact handheld temperature measuring instruments *For more details, please refer to the PDF materials or feel free to contact us.

• Distance measuring device
• Radiation thermometer
• Other measurement, recording and measuring instruments