イザワ List of Products and Services

3M Scotch-Weld 'DP460EG' is a two-component epoxy adhesive that can cure at room temperature without the need for heating during the curing process. Since the base and hardener are pre-packaged in a single cartridge, using a dedicated applicator and nozzle eliminates the hassle of measuring and mixing. 【Features】 ■ Low halogen type ■ Standard curing time (23°C): 24 hours ■ Paste-like consistency *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "High Thermal Conductivity Type" is a one-component epoxy heat-curing adhesive that contains thermally conductive fillers and has high thermal conductivity. When bonded with heat sinks, it enables more effective heat dissipation. Unlike grease, it does not require screws and can achieve a strong bond, resulting in improved workability and reliability. 【Product Lineup】 ■EW2070 ■EW2072 *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "Low Halogen Type" is a one-component epoxy heat-curing adhesive made with high-purity epoxy resin that meets the halogen content standards of the electrical and electronics industry. It can be safely used in applications that require low halogen, such as mobile devices and optical equipment. 【Product Lineup】 ■EW2072 ■EW2080 ■EW2081 ■EW2082 ■EW2083 *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "Low Temperature Cure Type" (Short Cure Time) is a one-component epoxy heat-curing adhesive that reacts and cures at relatively low temperatures. It is suitable for substrates that cannot withstand high heat. Additionally, when heated at high temperatures, it cures relatively quickly, enabling an increase in customer productivity. 【Product Lineup】 ■EW2050 ■EW2072 ■EW2083 *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "High Heat Resistance Type" is a one-component epoxy heat-curing adhesive that boasts excellent storage stability, with minimal changes in viscosity and performance even after being left at room temperature for several days. Since dry ice, which is classified as a hazardous material during air transport, is not required, it can be shipped as a non-hazardous material, thereby reducing transportation costs associated with its weight. It also has excellent electrical insulation properties, making it suitable for various bonding applications of electronic components. [Features] - High storage stability - Electrical insulation *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "High Heat Type" is a one-component epoxy heat-curing adhesive characterized by its high heat resistance, with a glass transition temperature of over 180 degrees. It has very high adhesive strength even at high temperatures, and its adhesive strength remains unchanged even after high-temperature and high-humidity durability tests, making it suitable for applications that require high heat resistance and reliability, such as automotive components and industrial robots. 【Product Lineup】 ■EW2034 ■EW2045 ■EW2046 *For more details, please refer to the PDF document or feel free to contact us.

• glue

3M Scotch-Weld "High Adhesion Type" is a one-component epoxy heat-curing adhesive with high adhesion strength, suitable for applications that require reliability. You can choose from adhesives with varying viscosities, from high-viscosity, non-drip types to low-viscosity flow types, depending on your application. Additionally, "EW2030" is highly electrically insulating and is recommended for electronic component applications. 【Features (EW2030)】 ■ High adhesion strength ■ Low viscosity ■ Electrical insulation *For more details, please refer to the PDF document or feel free to contact us.

• glue

The Safety Walk "Type D" is a non-slip tape suitable for indoor use, primarily for walking surfaces such as bathtubs (please refrain from using in areas that are constantly submerged in water) and shower rooms, where walking barefoot is common. It is easy to apply by simply peeling off the backing and sticking it down, effectively preventing slip accidents. Its effectiveness remains unchanged even when exposed to water or oil. 【Features】 ■ Indoor use ■ Flat surfaces for barefoot walking indoors ■ Bathtubs ■ Walking surfaces for barefoot use *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

Safety Walk "Type C" is a non-slip tape suitable for indoor use, primarily for play facilities and athletic machines. It is easy to apply by simply peeling off the backing and sticking it on, effectively preventing slipping accidents. Its effectiveness remains unchanged even when exposed to water or oil. "Type C" can also be used for barefoot walking surfaces and cushioning applications. 【Features】 ■ For indoor use ■ For flat surfaces and light indoor walking ■ Usable for barefoot walking surfaces and cushioning applications *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The Safety Walk "Type F" is a non-slip tape suitable for entrances and hallways in office buildings and commercial facilities. It is easy to use; simply peel off the backing and stick it on, making it effective in preventing slip accidents. Its effectiveness remains unchanged even when exposed to water or oil. Being a clear type, it is less likely to compromise the design of the flooring. Additionally, it can also be used for non-slip purposes in bathroom floors (washing areas). 【Features】 ■ Semi-outdoor use ■ Suitable for flat surfaces, indoor and outdoor ■ Transparent type *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The Safety Walk "Type SB" is a standard type anti-slip tape for general flat surfaces. It is easy to use; simply peel off the backing and stick it on, making it effective in preventing slip accidents. Its effectiveness remains unchanged even when exposed to water or oil. "Type SB" is recommended for use on ramps, stairs, vehicle steps, aircraft, and construction machinery. 【Features】 ■ For indoor and outdoor use ■ For flat surfaces; standard ■ Standard type for general flat surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Safety Walk "Type B" is a high-durability anti-slip tape for general flat surfaces. It is easy to use; simply peel off the backing and apply it, making it effective in preventing slip accidents. Its effectiveness remains unchanged even when exposed to water or oil. "Type B" is recommended for high-traffic ramps, stairs, and steps of vehicles, aircraft, and construction machinery. 【Features】 ■ For indoor and outdoor use ■ For flat surfaces and extra durability ■ High-durability type for general flat surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The Safety Walk "Type HD" is a high-durability anti-slip tape designed for areas with a lot of soil and mud. It is easy to apply by simply peeling off the backing and sticking it down, effectively preventing slip accidents. Its effectiveness remains unchanged even when exposed to water or oil. "Type HD" is especially recommended for areas where durability is essential, such as on steps of construction and agricultural machinery. 【Features】 ■ For indoor and outdoor use ■ For flat surfaces and heavy foot traffic ■ High-durability type *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

Safety Walk "Type A" is a non-slip tape suitable for uneven surfaces such as patterned steel plates, floors, and stairs. It is easy to use—just peel off the backing and stick it on, making it effective in preventing slipping accidents. Its effectiveness remains unchanged even when exposed to water or oil. "Type A" is made with an aluminum foil base, allowing it to conform well to uneven surfaces. It is also recommended for inspection areas around steps and tank trucks of special vehicles. 【Features】 ■ For indoor and outdoor use ■ For uneven surfaces and patterned steel plates *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

UL is a safety standard for electrical equipment established and approved by Underwriters Laboratories Inc. in the United States. Although it has no legal binding force in Japan, it has long been operated as a standard safety regulation within the industry. The UL standards cover a wide range of content, with approximately 800 categories, which can be broadly classified into flammability (flame retardancy), heat resistance, and electrical properties. For adhesive tape products, the UL standards include UL94, UL510, UL746C, and UL969. 【Our UL Certified Products】 ■UL746C: Polymer materials for electrical equipment (QOQW2) - VHB adhesive transfer tapes "F-9460PC," "F-9469PC," "F-9473PC" ■UL969: Marking and labeling system materials (PGGU2) - Adhesive transfer tapes "467MP," "468MP" *In addition to the products listed above, there are UL certified adhesive tapes available. For more details, please contact our branch or sales office. *For more information, please refer to the PDF document or feel free to contact us.

• Adhesive tape

"4390" is a polyimide film silicone double-sided adhesive tape designed for high heat-resistant silicone rubber. This product features a uniform coating of a heat-resistant silicone-based special adhesive on both sides of the polyimide film. It is suitable for applications that require high temperatures, low temperatures, and chemical resistance, and the liner can be easily peeled off from both sides, making it a new type of product. [Features] ■ Excellent heat resistance ■ Excellent chemical resistance ■ Excellent adhesion to silicone rubber and various materials *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

"ATX-0983" is a transfer tape made entirely of acrylic-based adhesive without a substrate. It has an unprecedented high transparency and excellent adhesion, demonstrating high peel strength. Additionally, this product uses release film (double liner) on both sides of the tape, eliminating concerns about paper dust. 【Features】 ■ Transfer tape made only of adhesive without a substrate ■ High shear strength ■ High transparency, making adhesive areas inconspicuous ■ Release film (double liner) used on both sides of the tape ■ No concerns about paper dust *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is a tape coated with a silicone-based special adhesive and an acrylic-based adhesive on a polyester substrate. It demonstrates high adhesion to silicone rubber, and the liner can be easily peeled off from both sides. It can be used for applications such as attaching silicone rubber to films and rubber materials within electronic devices, as well as for attaching switches to silicone rubber in home appliances. 【Features of the silicone-based adhesive side】 - Excellent adhesion to silicone rubber - Superior adhesion to various materials - Liner can be easily peeled off *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is a transfer tape that uses a special acrylic adhesive "300LSE" which exhibits high adhesion to most substrates, including low surface energy plastics (such as polypropylene). Unlike conventional tapes for low surface energy plastics, it has excellent heat resistance, allowing it to be used in a wide range of applications and environments. Additionally, while prior evaluation is necessary, it can also adhere to substrates with slight oil contamination. 【Features】 ■ Exhibits high adhesion to most substrates, including low surface energy plastics ■ Uses an adhesive with excellent high-temperature holding power ■ Can adhere to substrates with slight oil contamination (prior evaluation required) ■ 9495LE uses a film substrate, providing excellent processability *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is an adhesive transfer tape without a substrate that uses an acrylic-based adhesive. It has excellent heat resistance and high shear strength. In addition to applications such as bonding nameplates made of plastic and securing reinforcement plates for FPC, it is suitable for permanent bonding applications. 【Features】 ■ High adhesive strength ■ Excellent shear holding power ■ 467MP and 468MP are certified by the UL Marking and Labeling System (UL File No. MH-26202) ■ 467MP and 468MP meet the U.S. military standard MIL-P-19834B, Amendment 2 Type 1 *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is an adhesive transfer tape that withstands high temperatures (260°C) in lead-free solder reflow processes. After passing through the lead-free solder reflow, the degradation of the release paper is minimal, and the reduction in adhesive strength is significantly lower compared to conventional tapes. Additionally, it has excellent heat retention properties, resulting in less shifting at high temperatures, and due to the substrate, there is less adhesive bleed, making it easy to process. It is suitable for adhesive applications in FPC (Flexible Printed Circuit). 【Features】 - Minimal degradation of the release paper after passing through lead-free solder reflow, allowing for easy release. - The reduction in adhesive strength after passing through lead-free solder reflow is smaller than that of conventional tapes. - Excellent heat retention properties, resulting in less shifting at high temperatures. - Less adhesive bleed due to the substrate, providing excellent processability. - Low outgassing, minimizing the impact on electronic components and other materials. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

We handle re-peelable double-sided tape. We offer products such as "4591HL/4591HM," which features two types of acrylic adhesives with different adhesion strengths coated on both sides of a polyester substrate known for its excellent heat resistance, dimensional stability, and electrical properties, as well as "ST-415/ST-416P," developed for fixing resin plates during printing. 【Features of 9415PC】 ■ The strong adhesive type shows high adhesion to various substrates. ■ The weak adhesive type uses Post-it type adhesive, allowing for re-peeling and repositioning. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is a double-sided tape that uses the "200MP" adhesive, which has excellent final adhesion strength. It is also suitable for applications used at high temperatures. Additionally, it has excellent processability due to the use of a PET substrate. The tape is available in two colors: transparent and black. 【Features】 ■ Uses "200MP" adhesive, which exhibits high adhesion strength and excellent heat resistance ■ Uses PET film as the tape substrate, providing excellent processability ■ Available in two colors: transparent and black *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The product is a double-sided tape with a polyester substrate that excels in heat resistance, dimensional stability, and electrical properties, coated with an acrylic adhesive that has excellent yellowing resistance. "4597-30/4597" not only has high shear strength but also has a thin overall thickness, making it possible to save space when incorporated into electronic devices. "4591HH/4393" excels in heat resistance and durability, and shows high adhesion to various substrates. 【Features of 4597-30/4597】 ■ Excellent yellowing resistance ■ Thin overall thickness allows for space-saving ■ High shear strength *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is a general-purpose tape coated on both sides with an acrylic-based pressure-sensitive adhesive that has excellent adhesion properties, applied to a flexible non-woven fabric substrate. It exhibits excellent adhesion to various materials and has strong bonding capabilities even on low surface energy plastics such as P.P. and P.E. Additionally, it maintains its initial tack well at low temperatures and demonstrates superior adhesion to rough surfaces compared to other tapes. 【Features】 ■ Excellent adhesion to various materials ■ Maintains initial tack well at low temperatures ■ Superior adhesion to rough surfaces compared to other tapes ■ Uses release paper with excellent die-cut (full cut) and half-cut (partial cut) properties ■ Minimizes roll deformation such as gapping and telescoping *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The "Thin Tape" is a double-sided tape coated with acrylic adhesive on a non-woven fabric substrate. It is thinner compared to general-purpose tapes but exhibits good adhesion. It can be used for various applications such as fixing foam materials, nameplates, signboards, and lightweight components. 【Features】 ■ Thinner than conventional non-woven fabric tapes ■ Excellent adhesion properties ■ Tape colors are milky white and colorless to light yellow translucent in two options *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

"Re-releasable double-sided adhesive tape" is a product in which an acrylic adhesive is uniformly applied to both sides of a special strong non-woven fabric. It exhibits strong adhesion to various substrates while allowing for clean removal without residue even after long-term application. It is particularly excellent for adhesion and removal on plastics, making it suitable for products that require the reuse and recycling of components. 【Features】 ■ Can be removed from substrates without leaving residue or breaking the base material ■ High adhesive strength to various substrates ■ Especially superior adhesion to plastics ■ Suitable for use in products that require the reuse and recycling of components and in punched products *For more details, please refer to the PDF materials or feel free to contact us.

• Adhesive tape

This product is a double-sided tape with an acrylic adhesive applied to a PET substrate. It has an extremely low emission of VOC substances specified by the Ministry of Health, Labour and Welfare, and uses a strong adhesive type, demonstrating high adhesion to various materials. The tape is available in three thicknesses: thin 0.03mm, 0.05mm, and 0.10mm. It can be used for fixing and temporarily holding various materials. 【Features】 ■ Low VOC PET double-sided tape ■ Extremely low emission of VOC substances specified by the Ministry of Health, Labour and Welfare ■ Excellent adhesion at high temperatures ■ Excellent workability *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This product is a double-sided tape coated with an acrylic adhesive on a non-woven fabric substrate. It emits very little VOCs (volatile organic compounds) that can cause sick house syndrome, and there is almost no odor diffusing from the tape. It uses a strong adhesive type that demonstrates strong adhesion to various substrates. It can be used for fixing and temporarily holding various materials. 【Features】 ■ Low VOC non-woven double-sided tape ■ Almost no odor diffusing from the tape ■ Excellent adhesion under high temperatures ■ Excellent processability *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

Our company handles products developed by 3M's Healthcare Business Group, which has been providing products in the medical field for over 50 years, specifically "wearable biosensor products." Among these, the "skin adhesive tape" is designed with consideration for the impact on the skin when attaching medical devices to patients, using materials that have low cytotoxicity and allergic reactions. We contribute to the development of products that enable continuous health management. 【Product Lineup】 ◎ Silicone-based adhesive products ◎ Double-sided adhesive tape products ◎ Single-sided adhesive tape products *For more details, please refer to the materials. Feel free to contact us as well.

• Adhesive tape
• others

The "sealing tape" is developed for use laminated on microplates, minimizing the impact on samples and enabling stable analysis for microfluidic diagnostic devices. Due to its long sales history in various countries, it reduces the effort required for impact assessment on samples and product selection. Additionally, it is a product with low supply risk, as it is widely adopted around the world. 【Features】 ■ Uses low-extraction adhesive ■ Uses non-tacky adhesive (for some products) ■ High transparency ■ Chemically inert ■ Non-fluorescent *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• Other electronic parts
• others

The "Spacer Adhesive Tape" has an extremely low elution of adhesive components into organic solvents such as DMSO and aqueous solutions, minimizing the impact on analytical and diagnostic results. It is a product designed for microfluidic diagnostic devices. You can choose from various thicknesses and colors. Additionally, due to its long sales history in countries around the world, it reduces the effort required for impact assessment on samples and product selection. It is a product with low supply risk, as it is widely adopted globally, minimizing the chances of discontinuation. 【Features】 ■ Uses low-elution acrylic adhesive ■ Good adhesion to various materials ■ Colorless and transparent ■ Excellent die-cutting processability *For more details, please refer to the PDF materials or feel free to contact us.

• Adhesive tape
• others

The "hydrophilic treatment film" is a product for microfluidic diagnostic devices that improves sample flow within the channel and contributes to a reduction in diagnostic time. It enables diagnosis with a small amount of sample. It can be hydrophilically processed on polycarbonate and polystyrene, and printing is also possible. Due to its long sales history in various countries, it reduces the effort required for evaluating the impact on samples and selecting products. Additionally, it is a product with low supply risk, as it is widely adopted around the world. 【Features】 ■ Non-leaching hydrophilic treatment agent ■ No surfactants used ■ Good dimensional stability *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• others

At Izawa Co., Ltd., we offer 3M's "VHB Acrylic Foam Structural Adhesive Tape." This product is a new concept adhesive material that features a flexible and tough acrylic foam substrate on both sides, combined with an acrylic adhesive that excels in weather resistance and chemical resistance. It has a proven track record in the metal processing industry as well. It demonstrates strong adhesion for bonding various industrial materials while also providing numerous added values. 【Features】 - Follows the deformation of the bonded area without leaving residual stress - High peel strength that absorbs rebound force - Prevents stress concentration through surface bonding - High sealing performance - Excellent outdoor durability - Superior vibration absorption *For more details, please refer to the PDF materials or feel free to contact us.

• glue
• Adhesive tape

At Izawa Co., Ltd., we offer 3M's "Filament Tape 8981." This product features a polypropylene film that is reinforced with fiberglass, coated with adhesive, and is proven to be effective for the metal processing industry. The adhesive is designed to achieve a well-balanced adhesive strength and holding power, enabling reliable sealing. Additionally, due to its transparency, it can be applied over important text or prints on cardboard while still allowing the underlying text to be read. 【Features】 ■ Excellent adhesive strength and holding power, usable under various conditions ■ Transparent ■ Can be applied over important text or prints on cardboard while still allowing the underlying text to be read ■ Reinforced with high-strength fiberglass, allowing narrow tape to withstand high loads ■ Excellent initial tack, can be applied with light pressure ■ Proven effectiveness for the metal processing industry *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Adhesive tape

At Izawa Co., Ltd., we offer 3M's "Fall Protection Products." Our lineup includes the "Harness Type Safety Belt," which boasts excellent safety, durability, and comfort, as well as "Anchors" that meet international standards for strength. Additionally, we provide products for elevating people and materials in confined spaces, such as the "Confined Space Rescue" equipment for emergency rescue situations. 【Partial Lineup】 ■ DBI-SALA Exofit NEX Harness Type Safety Belt ■ Protector Harness Type Safety Belt ■ DBI-SALA Fall Protection Congestion Prevention Strap ■ Protector Safety Block ■ Protector Shock Absorber with Lanyard *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products
• Harness

3M's "skin adhesive tape products" use materials that have been confirmed to have sufficiently low cytotoxicity, sensitization (allergic reactions), and irritation, in accordance with the ISO 10993-1 biological safety evaluation guidelines. The "single-sided type" includes products made from breathable materials that are less prone to moisture and designed to minimize irritation when removed. The "double-sided adhesive type" offers elastic products tailored to various applications. They are suitable for securing medical devices, wigs, and attaching accessories. 【Main Material Features】 ■ Polyester (PET): A material with low elasticity and excellent dimensional stability. ■ Polyethylene (PE): A flexible material represented by plastic bags. ■ Polyurethane (PU): A material with excellent elasticity. ■ Non-woven fabric: An inexpensive, easily processed material with a paper-like appearance. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

At Izawa Co., Ltd., we offer 3M's "Floor Mats." The 3M "Floor Mats" are designed to keep buildings and facilities clean while ensuring that people can live safely and securely. Additionally, they contribute to reducing the running costs associated with the maintenance of buildings and facilities. 【Product Lineup】 ■ Entrance Mats (Indoor and Outdoor) ■ Wet Area Mats ■ Water and Oil Absorbent Mats ■ Anti-Fatigue Mats ■ Adhesive Mats / Custom Text Mats *For more details, please refer to the PDF document or feel free to contact us.

• mat

At Izawa Co., Ltd., we offer 3M's "Liquid Absorbent Materials." "Liquid Absorbent Materials" help prevent small-scale leaks of liquid hazardous substances, such as oil, protecting the local environment while assisting responsible companies in complying with environmental regulations. These products support safety at work sites and the preservation of a clean environment, while also being environmentally friendly by reducing the amount of waste that becomes garbage. 【Features】 ■ 3M Oil (Petroleum) Sorbent ■ 3M Chemical Sorbent ■ 3M Maintenance Sorbent ■ 3M Spill Kit (Products for Spill Response) ■ 3M Oil Absorbent Mat ■ 3M Large Spill Response Products *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products
• others

At Izawa Co., Ltd., we offer cleaning and washing products from 3M. We have a lineup that includes "floor pads and floor brushes" compatible with various floors and machines, "chemical products" that make it difficult for dirt to adhere without damaging the material, and "dusters and cleaning tool products" that allow for easy, safe, and efficient maintenance of all areas inside buildings, such as floors, walls, and windows. 【Product Lineup】 ■ Floor pads & floor brush products ■ Chemical products ■ Duster & cleaning tool products ■ Commercial scrubber products ■ Wiping cloth products ■ Kitchen-related products ■ Mat products ■ Liquid absorbent products ■ Anti-slip tape products *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents
• Other cleaning tools
• Other safety and hygiene products

Our company offers a lineup of "anti-slip tape" tailored to various locations such as stairs, ramps, and floors to prevent accidents caused by slipping. It can be easily applied by simply peeling off the backing and sticking it on. It is highly durable, and its effectiveness remains unchanged even when exposed to water or oil. You can choose from options suitable for various locations such as apartment entrances, train station stairs, ships, and construction machinery. 【Product Lineup】 ■ Indoor and Outdoor - 3B Safety Walk Anti-Slip Tape Type A - 3B Safety Walk Anti-Slip Tape Type HD - 3B Safety Walk Anti-Slip Tape Type B ■ Semi-Outdoor - 3B Safety Walk Anti-Slip Tape Type F ■ Indoor - 3B Safety Walk Anti-Slip Tape Type C - 3B Safety Walk Anti-Slip Tape Type D *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• Other safety and hygiene products

At Izawa Co., Ltd., we offer 3M's "cushioning materials" developed with a focus on improving quality, design, and user convenience for various applications such as mobile devices, office automation equipment, home appliances, furniture legs, and door stops. These materials feature excellent elasticity, cushioning effects, and a high coefficient of friction, and they are made from 3M's original polyurethane material that does not contain plasticizers or sulfur-based crosslinking agents. They are coated with a powerful pressure-sensitive adhesive. 【Product Lineup】 ■ Molding Products - Clear Type (Polyester-based Urethane) - Colored Type (Polyether-based Urethane) - PVC-Free Type (Polyester-based Urethane) - Custom Type ■ Urethane Roll Stock - Colored Type (Polyether-based Urethane) - Clear Type (Polyester-based Urethane) - High Flexibility Type (Polyether-based Urethane) *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

At Izawa Co., Ltd., we offer a selection of 3M products tailored to meet your needs, including "abrasives." We have a variety of products, starting with the "Scotch-Brite Non-Woven Surface Treatment Material," which features a three-dimensional structure with abrasives uniformly applied and bonded to nylon non-woven fabric. We also offer "precision abrasives," developed with a completely different concept from traditional coated abrasives, and "compounds" that can be chosen based on your purpose, from removing fine scratches on painted surfaces to polishing. 【Product Lineup】 ■ Scotch-Brite Non-Woven Surface Treatment Material ■ Precision Abrasives ■ Compounds ■ Coated Abrasives ■ Resin Molded Products ■ Flexible Diamonds *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other abrasives

At Izawa Co., Ltd., we offer 3M's "fastening products" that are easy to use and can be repeatedly attached and detached. Our lineup includes the detachable "Dual Lock Fastener," which boasts several times the strength of hook and loop, and the "Scotchmate Hook and Loop Fastener," which utilizes a strong adhesive in a flexible fastening system, among other diverse products. 【Product Lineup】 ■ 3M Dual Lock Fastener ■ 3M Dual Lock Thin Fastener ■ 3M Dual Lock Fastener (Molded Type) ■ 3M Scotchmate Hook and Loop Fastener *For more details, please refer to the PDF materials or feel free to contact us.

• fastener

At Izawa Corporation, we offer a selection of 3M adhesives tailored to meet your needs. We provide a variety of products, including "industrial adhesives" that contribute to the development of various industries such as aerospace, construction, automotive, electronics, printing, design, and packaging, which require harsh usage conditions, as well as "electronic adhesives" that have high electrical insulation properties and are optimal for electronic component applications. 【Product Lineup】 ■ Industrial - 3M Scotch-Weld EPX Adhesive System - 3M Scotch-Weld One-Part Epoxy Adhesive - 3M Scotch-Weld Moisture-Curing Hot Melt ■ Electronic - 3M Scotch-Weld One-Part Epoxy Heat-Curing Adhesive - 3M Scotch-Weld Two-Part Epoxy Room Temperature-Curing Adhesive - 3M One-Part Urethane Moisture-Curing Adhesive *For more details, please refer to the PDF document or feel free to contact us.

• glue