テクネ計測 List of Products and Services

● Equipped with sensor heating function ● For high humidity environments and chemically contaminated environments ● Quickly recovers even during condensation ● Detection using HMC01 monolithic polymer cell ● Capable of measuring temperatures up to 180°C and pressures up to 10MPa The EE33 temperature and humidity dew point transmitter for high humidity and harsh environments is the top-of-the-line device for humidity and temperature measurement in the series. It can measure relative humidity, dew point, absolute humidity, and more with high responsiveness and reliability even under the most extreme conditions. Successor model: HTS801 For more details, please download the catalog or contact us.

● Relative humidity measurement and temperature measurement ● Calculation of dew point, absolute humidity, and mixing ratio is also possible ● Available in wall-mounted, duct insertion, and remote probe types ● Alarm output 2 channels (standard) ● Digital output Modbus RTU/Modbus TCP (optional) ● Environmental resistance IP65 ■ The high-precision, high-functionality temperature and humidity dew point transmitter EE310 is a hygrometer for industrial applications. The probe can be adapted to the customer's environment, capable of handling high-temperature environments with a maximum temperature range of 180°C and medium-pressure environments with a maximum pressure of 2 MPa. Probe selection examples: 【Wall-mounted type】→T1 【Duct-mounted type】→T2 【Remote probe type medium pressure (temperature: -40°C to 180°C, pressure: atmospheric pressure)】→T5 【Remote probe type high temperature (temperature: -40°C to 180°C, pressure: 1kPa to 2MPa)】→T10 【Remote probe type for temperature measurement Φ6 mm】→T24 For more details, please download the catalog or contact us.

● Gas explosion-proof/dust explosion-proof certification for installation in Zone 0 Div.1 (based on certification) ● Conversion to related physical quantities ● Stainless steel housing and stainless steel probe ● Capable of measuring temperatures from -40 to 180 ℃ ● Maximum pressure 2Mpa ■ The EE300Ex-M1 is developed for measuring humidity (RH) and temperature (T) in explosive hazardous areas. In addition to Japan TIIS certification, it has obtained explosion-proof certifications in Europe (ATEX), for international use (IECEx), South Korea (KCs), and North America (FM). The EE300Ex can be used for flammable gas and dust applications. ■ It is also possible to customize the settings using the included configuration software outside of the explosion-proof area. This includes settings for analog output, temperature and humidity calibration, etc. ■ In addition to measurements in gas, it has also obtained intrinsic safety explosion-proof certification in Europe (ATEX) and for international use (IECEx) for measuring moisture content in oil (absolute moisture content in ppm) and relative moisture activity values. For more details, please download the catalog or contact us.

● Humidity measurement range 0 to 100% RH ● Dew point -40 to +100℃ (depending on model) ● Temperature -40 to +120℃ (depending on model) ● Humidity, temperature, and dew point display available ● Display available/not available selectable ● Polycarbonate housing/metal housing selectable ● Probes for narrow spaces also available ■ The EE23 is a multifunctional, high-precision industrial temperature and humidity dew point transmitter that combines easy installation and operation. The latest IP65 waterproof housing is composed of three parts. This allows for simple installation and quick sensor replacement. - Rear housing: Connector - Middle housing: Electrical circuit board - Front housing: Display section (optional) For more details, please download the catalog or contact us.

● Achieves high precision using the two-temperature two-pressure method ● Maximum operating pressure of 1.2 MPa ● High response speed ● Can calibrate up to 4 units simultaneously ● Automatic calibration function (optional) ● Usable for calibrating other companies' hygrometers ■ The HUMOR 20 is a high-precision humidity calibrator using the two-temperature two-pressure method. ■ The maximum operating pressure is 1.2 MPa, featuring a high response speed. ■ It can calibrate up to 4 units simultaneously, and automatic calibration is available as an option. The calibration range is from 10% to 95% relative humidity, and it can also calibrate hygrometers from other manufacturers. For more details, please download the catalog or contact us.

● Measurement range: -60 to +60 ℃dp ● Maximum pressure: 10 MPa ● Accuracy: ±2 ℃dp ● Automatic calibration function The core dew point detection component of the EE371 dew point transmitter utilizes the monolithic cell type temperature and humidity sensor HMC2000, which employs E+E's thin-film technology. The built-in automatic calibration system enables an accuracy within ±2℃. Its compact and robust metal housing, 360° rotating mounting screws, and various connection screw diameters make installation and maintenance easy. For more details, please contact us or refer to the catalog.

● In addition to measuring dew point (Td), it is capable of measuring frost point (Tf) and volumetric concentration (Wv). ● Compact design. ● Stainless steel housing structure. ● Measurement values are output in analog 4-20 mA and digital Modbus RTU. ■ The EE354 is a transmitter capable of measuring dew points down to -20 °C dp. Its compact design and robust stainless steel housing structure make it easy to install and use in various applications. ■ By using the optional USB-RS485 converter and the free downloadable configuration software, you can change settings such as analog output. Additionally, single-point and two-point calibration can also be performed via the software.

● Available in wall-mounted type, duct insertion type, and remote probe type ● Unit selection available for dew point, absolute humidity, etc., in addition to temperature and humidity ● Waterproof and dustproof structure (IP65/NEMA4) ● HCT01 sensor element is strong against harsh environments such as contaminants ● Analog output or BACnet MS/TP or Modbus RTU ■ The EE210 is a hygrometer that supports various air conditioning applications. In addition to high-precision temperature and humidity measurement, it can be converted to moisture content such as dew point, absolute humidity, and mixing ratio. The housing is designed to minimize installation costs while also excelling in foreign object and condensation prevention performance. For more details, please download the catalog or contact us.

● For HVAC (air conditioning) applications ● Selectable from wall-mounted / duct insertion ● Humidity accuracy ±2.5 %RH (at 20℃) ● Waterproof and dustproof structure (IP65/NEMA4) ● HCT01 sensor element is resistant to harsh environments such as pollutants ● No display section ■ The EE160 is a hygrometer designed for HVAC applications. The newly developed temperature and humidity sensor HTC01 is robust in harsh environments such as those with pollutants, allowing for long-term high-precision measurements. For more details, please download the catalog or contact us.

● Small probe with a length of 10 cm or less ● Humidity accuracy: ±2 % RH, temperature accuracy: ±0.2 ℃ ● Wide measurement range (0–100 %RH and -40–80 ℃) ● Analog output/passive temperature output/E2 digital output ● Optional radiation shield available ■ The EE08 provides reliable humidity (RH) and temperature (T) measurements for both indoor and outdoor applications. With exceptional temperature compensation, it achieves high-precision temperature and humidity measurements across a wide range of 0–100 %RH and -40–80 ℃. For more details, please download the catalog or contact us.

EE060: Voltage Output Type ● Cable type / screw-type connector connection available ● Sensor coding (EE060 only) EE061: Current Output Type ● Outputs humidity as 4-20mA and temperature as resistance output ■ EE060/061 are temperature and humidity transmitters characterized by excellent long-term stability. The "EE060" features a molded electrical component within the probe to enhance sealing, and with the HCT01 sensor element coated with E+E's unique coating, it is capable of maintaining high-precision measurements over a long period. The "EE061" comes in two types: a simple version for humidity measurement only, and a temperature and humidity probe that outputs humidity (4-20mA) and temperature (resistance output).

● With sensor heating function ● Strong against harsh environments caused by contaminants ● Waterproof and dustproof structure (IP65/NEMA4) ● Display available/not available selectable ■ The EE211 is a temperature and humidity transmitter that can perform high-precision temperature and humidity measurements over a long period in high humidity environments (above 85% RH) and environments where condensation occurs. It can use a humidity probe with a heating function and a replaceable temperature probe. It is robust against harsh environments caused by contaminants, and the sealed electrical components within the detection probe and the coating (HCT01 sensor element) enable long-term high-precision measurements. For more details, please download the catalog or contact us.

● High-precision temperature and humidity measurement ● Available in wall-mounted and duct-insert types ● Temperature and humidity elements are replaceable ● Replacement elements are calibrated for both temperature and humidity ● Capable of calculating dew point temperature, absolute humidity, and mixing ratio ■ The EE212 allows for the exchange of humidity (RH) and temperature (T) sensor modules, optimized for HVAC control applications across various industries.

● Relay output issues preliminary alarm before condensation occurs ● Dust resistance ● Compact and easy to install ● LED status display ■ EE046 is a condensation prevention monitoring monitor used to prevent condensation at low temperature points. It can be easily installed on flat surfaces, ducts, and pipes with a maximum diameter of 50 mm. The humidity detection section employs the HC105 SMD humidity sensor utilizing thin film technology. For more details, please download the catalog or contact us.

● Measures and records temperature/humidity/dew point/CO2/atmospheric pressure ● Capable of logging up to 3,200,000 data points ● USB and Ethernet compatible ● Two external analog inputs ● Four models available to choose from based on application ● The CO2 sensor recommended by the Ministry of Economy, Trade and Industry operates on an optical detection principle ● Equipped with CO2 automatic calibration function (automatic correction function) ■ The HUMLOG20 data logger is a product that balances cost-effectiveness with multifunctionality and high precision, capable of measuring and recording humidity, temperature, atmospheric pressure, and CO2 concentration. ■ THI model (standard specification) ... Measures and records temperature, humidity, and dew point THIP model ... Measures and records temperature, humidity, dew point, and atmospheric pressure TCO model ... Measures and records temperature, humidity, dew point, and CO2 E model ... Analog input from external sensors and digital input interface

● For measuring relative humidity (RH) and temperature (T) ● Output selectable (Analog/Modbus/BACnet) ● Electrical equipment housed in surface cover ■ The EE10 is an indoor hygrometer designed for accurate measurement of relative humidity (RH) and temperature (T) in residential and commercial air conditioning. There is also a version that outputs humidity as an analog signal and temperature as a resistance output. Measured values compatible with analog output can also be displayed on an optional display. For further details, please download the catalog or contact us.

● Probes can be selected according to the purpose ● 11 types of probes for measuring temperature and humidity, wind speed, and CO2 ● Data logging function ● Up to 2 million data points can be stored in internal memory ● Free data management software ● The CO2 probe is equipped with an optical sensor recommended by the Ministry of Economy, Trade and Industry, with an automatic correction function included. ■ TEKHNEPort is a rugged handheld unit equipped with multifunctionality. It allows the selection of probes that can be used according to the application, making it suitable for various uses. It can be operated via a touchscreen and can display measurement values in up to 3 units on a TFT LCD. A total of 23 types of measurement units are available, including the following (available measurement units vary by probe): - Relative Humidity RH - Temperature T - Dew Point Td - Absolute Humidity dv - Mixing Ratio r - Wind Speed v - Volumetric Flow Rate V̇ - Atmospheric Pressure p - CO2 ppm For more details, please contact us or refer to the catalog. # Thermometer and Hygrometer

● No calibration required for 5 years ● The detection principle recommended by the Ministry of Economy, Trade and Industry is an optical sensor ● Long-term stability achieved through automatic CO2 calibration function ● Temperature compensation function ● Excellent resistance to contamination ● Installation in hard-to-maintain locations such as high places ● No calibration required for 5 years ■ The EE850 is a CO2 concentration measuring device suitable for applications such as ventilation systems and building automation. ■ To compensate for aging degradation, it employs E+E's unique dual-wavelength non-dispersive infrared (NDIR) CO2 sensor, which is resistant to contamination and provides stable long-term measurements. ■ The humidity detection component is protected from dust, dirt, and corrosion by E+E's unique sensor coating. ■ In addition to measuring carbon dioxide, relative humidity, and temperature data, the dew point calculated through temperature and humidity conversion can be output via analog output (voltage/current selectable), and a passive temperature sensor with a two-wire connection can also be selected as an additional option. For more details, please download the catalog or contact us.

● The detection principle recommended by the Ministry of Economy, Trade and Industry for CO2 measuring devices is an optical sensor. ● Equipped with automatic calibration function (automatic correction function). ● Revolutionary long-term stability. ● Temperature/pressure compensation function. ● Low power consumption. ● Compact (45 mm * 22 mm * 15 mm). ■ The EE894 is a digital sensor module suitable for ventilation control and general building air conditioning management applications for CO2/temperature/humidity/differential pressure. ■ To compensate for aging degradation, it adopts E+E's unique dual-wavelength NDIR CO2 sensor. ■ It is resistant to contamination and provides long-term stability. In addition to CO2 measurement, it can also measure humidity (RH), temperature (T), and differential pressure (p). For more details, please download the catalog or contact us.

● Digital sensor platform ● Used in combination with E+E company's sensor probes ● Up to 3 probes can be connected ● Maximum display of 3 points and 2 output points possible ● Connects via USB-C, settings can be changed ■ The Sigma 05 sensor hub is a foundational device equipped with outputs and a display, used in combination with E+E company's sensor probes. The Sigma 05 automatically detects E+E probes and performs hub setup based on the configuration.

Our company offers a wide range of measuring instruments and calibration devices, including dew point meters. This time, we would like to introduce products for the semiconductor industry from our lineup. 【Product Lineup】 ■ CRDS (Cavity Ring-Down Spectroscopy) Simple Trace Analyzer "Spark H2O" Measurement concentration: 0–2000 ppm, Measurement accuracy: ±4% or detection limit 【Free Moisture Measurement Promotion】 We are offering free measurements using the trace analyzer "Spark H2O." Please apply through the "Contact Us" section below. *Please note that measurements may not be possible depending on the environment. ■ Online Dew Point Meter "TK-100ON" ■ Polymer Dew Point Meter "TE-660TR" ■ Mirror (Mirror Surface Cooling) Dew Point Meter "MBW973" ■ Air Velocity Transmitter "EE671" ■ Galvanic Oxygen Concentration Meter "2001LC" ■ Temperature and Humidity Meters "EE310," "EE08," "EE061" ■ Low Dew Point Calibrator "FPG" ■ Temperature and Humidity Calibrator "CGS240" *For more details, please refer to the PDF document or feel free to contact us.

● Can be installed in hazardous location Class 1 (Zone 1) ● Obtained domestic explosion-proof certification ● Sensors with excellent long-term stability ● Probes can be replaced without calibration (optional) ● Environmental resistance: IP65 ■ The EE100Ex temperature and humidity dew point transmitter is developed for measuring humidity (RH) and temperature (T) in explosive hazardous areas. In addition to Japanese CSA certification up to Zone 1, it has also obtained explosion-proof certifications from Europe (ATEX) and international certifications (IECEx). For more details, please download the catalog or contact us.

● For outdoor and weather-related applications ● Displays conversion values for temperature, humidity, dew point, frost point, and specific enthalpy ● Optional radiation shield can be installed ● HCT01 sensor element is robust against harsh environments such as pollutants ■ EE210 OUTDOOR The EE210 Outdoor temperature and humidity transmitter is suitable for outdoor applications. In addition to high-precision temperature and humidity measurements, it can also display conversion values for dew point, frost point, and specific enthalpy. The optional HA010501 radiation shield can be installed on walls and other surfaces. The radiation shield reduces response time due to the effects of natural ventilation and protects the detection probe from solar radiation and rainfall. For more details, please download the catalog or contact us.

● Temperature and humidity transmitter suitable for calibration in the pharmaceutical field ● Probe can be detached from the housing ● Housing material can be selected from polycarbonate/metal ● Wall-mounted/rail-mounted (DIN EN 50022) ■ The EE220 is a temperature and humidity transmitter with a detachable housing and probe. ■ In the FDA (Food and Drug Administration) regulatory field, on-site calibration may be required, and the EE220 can accommodate this with two types of probes. By using an extension cable, the EE07 probe can be connected to the calibrator without removing it from the EE220 main unit.

● Humidity and temperature transmitter probe filter 　　- SUS sintered filter, PTFE membrane filter, SUS grid, etc. ● Mounting flange ● LC display, cover ● Power supply adapter ● Sensor block ● Waterproof guard ● Protective cap ● Radiation shield ● Mounting/connection auxiliary equipment ● Interface cable/converter ● Connector ● Reference probe ● Cable ● T-coupler, etc.

● No need to fix the sensor in the constant temperature and humidity chamber ● Temperature and dew point sensors can be fixed to the self-supporting stand ● Graphing of 9 temperature points and 1 dew point ● 9 temperature points can be converted to relative humidity ■ The MBW Spider is a mounting fixture for fixing sensors during calibration in a constant temperature and humidity chamber. It is made of 11 stainless steel rods and silicone material that protects and insulates the temperature sensors. The rods can be installed in a total of 11 locations: the four corners and the center line on both the top and bottom surfaces. This design meets the testing standards and guidelines for constant temperature chambers such as EURAMET/cd/20, IEC60068, DKD-R5-7, and NF X 15-140. ■ When combined with a mirror-type dew point meter, it can be used to evaluate the uniformity of relative humidity by combining uniform temperature and dew point measurements. This method complies with the aforementioned standards and guidelines. ■ The separately sold T12 thermometer is a multi-channel temperature measurement system capable of measuring up to 12 thermometers. With its unique software, it can measure the distribution of humidity in real-time from temperature/dew point data. For more details, please download the catalog or contact us.

Tekune Measurement has been selling dew point meters and other products as experts in moisture management in gases for the past 45 years. We offer a wide range of products, including the online dew point meter "TK-100ON" with a dew point temperature range of -100 to +20°C, the compact galvanic oxygen concentration meter "2001LC," and the temperature and humidity meter "EE310," which can be equipped with Modbus RTU and Modbus TCP options. We provide maintenance and technical support for products from overseas manufacturers domestically, ensuring that our customers can use them with peace of mind through our prompt and accurate support system. Additionally, we will be exhibiting at "Semicon Japan," which will be held from December 14, 2022. Please feel free to contact us for more details. 【Products We Handle (Partial)】 ■ Online Dew Point Meter: TK-100ON ■ Polymer Dew Point Meter: TE-660TR ■ Mirror (Mirror Cooling) Dew Point Meter: MBW973 *For more details, please refer to the PDF document or feel free to contact us.

● In high humidity and chemically contaminated environments ● Quickly recovers even during condensation ● Detection using monolithic polymer cells ● Operating range -80 to +180℃, maximum pressure resistance 30MPa ● Digital output available (RS485) The HTS801 temperature and humidity dew point transmitter for high humidity and harsh environments is the successor to the EE33. It can measure relative humidity, dew point, absolute humidity, and more with high responsiveness and reliability under the most severe conditions. For more details, please download the catalog or contact us.

● Outstanding measurement performance with patented sensor technology ● Excellent long-term performance even in dusty or dirty environments ● Analog output selectable as voltage or current ● Wide temperature range -40 to +80°C ● Self-heating function ■ The HTP201 boasts excellent performance and is ideal for cost reduction and reliable measurement of relative humidity and temperature across various industrial sectors. For more details, please download the catalog or contact us.

● For measuring relative humidity (RH) and temperature (T) ● Selectable output (Analog/Modbus/BACnet) ● Electrical equipment housed in the surface cover ● Outstanding measurement performance with patented sensor technology ■ The HTS201 is an indoor thermometer and hygrometer designed for accurate measurement of relative humidity (RH) and temperature (T) in residential and commercial air conditioning. There is also a version that outputs humidity as an analog signal and temperature as a resistance output. The measured values that support analog output can also be displayed on an optional display. For more details, please download the catalog or contact us.

● For temperature (T) measurement ● Selectable output (Analog/Modbus/BACnet) ● Electrical equipment housed in the surface cover ■ The TES201 is designed for accurate room temperature (T) measurement in residential and commercial air conditioning. Measured values compatible with analog output can also be displayed on an optional display. For more details, please download the catalog or contact us.

● Temperature (T) measurement use ● Output selection available (Analog/Modbus/BACnet) ● Compact design ■ The EE451 features voltage or current output, RS485 communication with Modbus RTU or BACnet MS/TP protocol. Additionally, you can choose a sensor element for passive temperature measurement. An optional display is available with analog output. The compact and robust housing allows for unbiased measurement of ambient temperature. Easy setup and adjustment are possible with optional adapters and free product configuration software.

● For measuring relative humidity (RH) and temperature (T) ● Selectable output (Analog/Modbus/BACnet/CANopen) ● Excellent performance even in harsh condensation environments ■ The EE072 is suitable for demanding processes and climate control applications in agriculture, storage warehouses, food, pharmaceuticals, clean rooms, outdoors, artificial snow machines, and transportation. In addition to measuring relative humidity (RH) and temperature (T), it calculates all parameters related to humidity.

● -40 to +80°C ● Accuracy ±0.1 °C ● IP68 stainless steel housing The EE074 probe accurately measures the temperature (T) of air, gas, and liquids in a wide range of process and environmental control applications, including food and beverage, pharmaceuticals, biotechnology, clean rooms, and agriculture.

● The detection principle recommended by the Ministry of Economy, Trade and Industry for CO2 measuring devices is an optical sensor. ● Equipped with automatic calibration function (auto-correction function). ● Revolutionary long-term stability. ● Temperature/pressure compensation function. ● Low power consumption. ● Compact. ■ The EE895 is ideal for ventilation control and general building air conditioning management applications. Due to its low power consumption, it is also suitable for battery-operated devices such as handheld units, data loggers, and wireless transmitters. ■ To compensate for aging degradation, E+E's unique dual-wavelength NDIR CO2 sensor is employed, which is resistant to contamination and provides long-term stability. It performs accurate measurements across all temperature ranges. ■ In addition to CO2 measurement, it can also measure temperature (T) and differential pressure (p). The temperature and pressure compensation from the included sensors minimizes the impact of altitude and external environments on CO2 measurements. ■ The measurement values for CO2, temperature (T), and differential pressure (p) can be output digitally via I²C or UART. Settings can be configured through digital communication. The measurement interval for CO2 can be set according to application and power conditions. For more details, please download the catalog or contact us.

● Monolithic cell-type polymer sensor ● Temperature measurement range -50 to 180 ℃ ● Remote probe and printed circuit board ■ The EE99-1 humidity module is ideal for humidity/temperature measurement in constant temperature and humidity chambers. For more details, please download the catalog or contact us.

● Modbus RTU with RS485 ● Excellent long-term performance even in dusty and dirty environments ● Pressure resistance up to 20 bar ● Wide temperature range -40 to +120°C The HTP501 can reliably measure relative humidity (RH) and temperature (T) in industrial process control applications in harsh environments up to 20 bar. In addition to measuring relative humidity (RH) and temperature (T), the HTP501 can calculate all humidity-related physical quantities such as dew point temperature (Td), absolute humidity (dv), and mixing ratio (r).

● High-precision humidity (RH) and temperature (T) measurement ● Plug-in and replaceable ● Excellent long-term stability ● Very low power consumption ● Digital output ■ The EE07 is suitable for general air conditioning management and OEM applications, utilizing the proven E+E HC105 humidity (RH) sensor. This sensor is available with a polycarbonate housing and a metal housing, as well as a probe for temperature (T).

● A calibration method that utilizes the fact that the relative humidity of air in equilibrium with a lithium chloride aqueous solution adjusted to a certain concentration remains constant. ● A calibration kit that is less affected by external air conditions. ● The calibration solution (lithium chloride aqueous solution) does not emit toxic gases, so it is not harmful. ■ Humidity transmitters, like any other measuring instruments, require regular inspection and adjustment. With this calibration kit, users can easily perform calibration themselves without any special training or skills. We provide five types of humidity ampoules tailored to the humidity to be calibrated. Each type of humidity ampoule is accurately concentration-adjusted through titration with chloride ions, ensuring high precision in the humidity standards listed in the table below.

● Modular design ● Removal without disassembling the piping ● Analog, pulse, switching output ● Modbus RTU and M-Bus ■ EE741 is an inline flow meter specifically designed for accurately measuring and monitoring compressed gases and industrial gases in pipes ranging from DN15 to DN50. The principle of thermal measurement and the proven E+E thermal film sensor element provide the best long-term stability and fast response. With application-specific multipoint functionality, it is factory set to 7 bar (102 psi), allowing for excellent measurement accuracy even in low ranges. This enables reliable leak detection and corresponding energy savings. Additionally, it features an optimized structure for easy installation and maintenance. Measurement quantities: m3/h, m3/min, l/min, l/s, kg/h, kg/min, m/s, SCFM, ft/min, °C, °F Standard conditions (factory setting): 1013.25 mbar (14.7 psi), 0 °C (32 °F) (configurable) For further details, please contact us.

● Compact design ● Easy installation and replacement ● Excellent price/performance ratio The EE040 is designed to measure relative humidity (RH) and temperature (T) cost-effectively in OEM applications. It features high-quality EEH210 RH and T sensing elements that provide reliable long-term stable measurement performance. The electronic circuit board and components are protected with a special varnish. Additionally, the unique E+E coating protects the RH sensor from dirt, dust, and corrosion, ensuring excellent long-term stability even in contaminated environments. Measurement data is available via two analog voltage outputs. The design of the EE040, along with its plug connection and the included mounting flange, makes design, installation, and replacement easy.

● Double heating function to prevent condensation ● IP67 environmental resistance ● Analog and digital output ● Modbus RTU and M-Bus The EE260 temperature and humidity transmitter enables high-precision temperature and humidity measurements for meteorological research and outdoor applications. It integrates a humidity sensor with heating function and a temperature sensor into a single compact probe, and is compatible with radiation shields.

● Compact design ● Replaceable and pluggable ● Sensor protection even in harsh environments ● Low power consumption ■ The EE03 is a cost-effective, high-precision temperature and humidity module equipped with a digital interface. It features the proven long-term stability of E+E's humidity sensing element. The EE03 is optimized for optimal thermal coupling with surfaces, which is essential for accurate measurement of surface moisture. In addition to measuring ambient humidity, the EE03 can also be used as a condensation monitor, indicating the risk just before condensation occurs. E+E's unique sensor coating is a protective layer applied to the sensing element. This coating significantly enhances the lifespan and measurement performance of the EE03 in corrosive environments. Furthermore, by preventing drifting impedance caused by deposits on the active sensor surface, long-term stability is improved in dusty, dirty, and oily conditions.