テクネ計測 Product Lineup

● Measurement range of 0 to 20 m/s for building air conditioning and ventilation applications [EE650] ● Measurement range of 0 to 2 m/s for measuring low wind speeds in clean rooms, etc. [EE660] ● Excellent long-term stability and resistance to contamination ● Measurement range, output signal, and response speed can be selected via jumper pins on the main unit ● Low angle dependence and easy installation ■ The EE650/EE660 is a wind speed transmitter equipped with the latest VTQ wind speed sensor. Based on cutting-edge thin-film technology, E+E's unique VTQ thermal sensor excels in contamination resistance due to its innovative shape, allowing for stable measurements over long periods. For more details, please contact us or refer to the catalog.

● Small probe type ● High precision, long-term stability ● Excellent contamination resistance ● Available in cable type and plug type ● Easy to achieve accurate positioning along the airflow with the included mounting flange ■ The EE671 is a general-purpose small anemometer. ■ By selecting the digital output with Modbus RTU interface, it can be directly integrated into new building automation systems. The use of an optional configuration kit allows for easy adjustment of output range, Modbus parameters, and probe calibration. For more details, please download the catalog or contact us.

● Measurement range: 0 to 40 m/s, temperature range: -40 to +120℃ ● Software with configurable settings ● Four types tailored for installation locations (wall-mounted type, duct insertion type, remote probe type, remote probe type with maximum pressure of 1 MPa) ● Convection error cutoff function ■ The EE75 is a wind speed transmitter developed for high-precision measurements across a wide range of wind speeds and temperatures. ■ In narrow piping, convection due to temperature differences can be a factor in wind speed measurement errors. The EE75 has a cutoff function that prevents the detection of this convection error wind speed. The cutoff point and hysteresis at startup can be set using configuration software. For more details, please download the catalog or contact us.

● Probes can be selected according to the purpose ● 11 types of probes for measuring temperature and humidity, wind speed, and CO2 ● Data logging function ● Up to 2 million data points can be stored in internal memory ● Free data management software ● The CO2 probe is equipped with an optical sensor recommended by the Ministry of Economy, Trade and Industry, with an automatic correction function included. ■ TEKHNEPort is a rugged handheld unit equipped with multifunctionality. It allows the selection of probes that can be used according to the application, making it suitable for various uses. It can be operated via a touchscreen and can display measurement values in up to 3 units on a TFT LCD. A total of 23 types of measurement units are available, including the following (available measurement units vary by probe): - Relative Humidity RH - Temperature T - Dew Point Td - Absolute Humidity dv - Mixing Ratio r - Wind Speed v - Volumetric Flow Rate V̇ - Atmospheric Pressure p - CO2 ppm For more details, please contact us or refer to the catalog. # Thermometer and Hygrometer

● ±1.5% of high-precision indication value ● Measurement under pressure set before shipment ● Excellent reproducibility ● Quick sensor replacement under line pressure (EE772) ● Bus interface for Modbus RTU/M-BUS ■ The EE771/EE772 adopts the thermal mass flow principle and is suitable for measuring flow rates in pipes ranging from DN15 (1/2”) to a maximum of DN80 (3”). ■ It can measure the usage of compressed air, nitrogen, CO2, oxygen, argon, or other non-corrosive, non-flammable gases. ■ The unique installation concept, which combines a measurement valve and a shut-off function, allows for quick installation and removal during regular calibration, and ensures accurate and reproducible positioning within the pipe, guaranteeing high precision. For more details, please download the catalog or contact us.

● Accurate measurement even at low wind speeds ● Measurement of wind speed and temperature ● Top-class H2O2 resistance due to protective coating ● Display of wind speed and sensor status with LED light ● Easy cleaning due to GMP-compliant design ● Straight or 90° right-angle probes of various lengths ■ The EE680 is a transmitter capable of high-precision measurement of wind speed and temperature under low wind speed conditions. The GMP-compliant design is ideal for clean rooms and safety cabinets in the pharmaceutical, life sciences, and microelectronics industries. For more details, please download the catalog or contact us.

We are selling the next-generation VTQ new anemometer sensor, proudly developed by E+E. (VTQ Sensor: A revolutionary sensor that allows for long-term measurements even in the presence of dust, minimizing errors, based on the same principle as thermal anemometers.) A common issue in wind speed measurement is that dust and dirt adhering to the sensor during measurement can significantly increase measurement errors, eventually leading to failure. However, the VTQ has researched the airflow around the sensor and has greatly reduced dust adhesion by preventing dust from directly contacting the sensor. This has enabled continuous and stable measurements. For more details about the anemometer, please visit the URL below.

Tekune Measurement has been selling dew point meters and other products as experts in moisture management in gases for the past 45 years. We offer a wide range of products, including the online dew point meter "TK-100ON" with a dew point temperature range of -100 to +20°C, the compact galvanic oxygen concentration meter "2001LC," and the temperature and humidity meter "EE310," which can be equipped with Modbus RTU and Modbus TCP options. We provide maintenance and technical support for products from overseas manufacturers domestically, ensuring that our customers can use them with peace of mind through our prompt and accurate support system. Additionally, we will be exhibiting at "Semicon Japan," which will be held from December 14, 2022. Please feel free to contact us for more details. 【Products We Handle (Partial)】 ■ Online Dew Point Meter: TK-100ON ■ Polymer Dew Point Meter: TE-660TR ■ Mirror (Mirror Cooling) Dew Point Meter: MBW973 *For more details, please refer to the PDF document or feel free to contact us.

Our company offers a wide range of measuring instruments and calibration devices, including dew point meters. This time, we would like to introduce products for the semiconductor industry from our lineup. 【Product Lineup】 ■ CRDS (Cavity Ring-Down Spectroscopy) Simple Trace Analyzer "Spark H2O" Measurement concentration: 0–2000 ppm, Measurement accuracy: ±4% or detection limit 【Free Moisture Measurement Promotion】 We are offering free measurements using the trace analyzer "Spark H2O." Please apply through the "Contact Us" section below. *Please note that measurements may not be possible depending on the environment. ■ Online Dew Point Meter "TK-100ON" ■ Polymer Dew Point Meter "TE-660TR" ■ Mirror (Mirror Surface Cooling) Dew Point Meter "MBW973" ■ Air Velocity Transmitter "EE671" ■ Galvanic Oxygen Concentration Meter "2001LC" ■ Temperature and Humidity Meters "EE310," "EE08," "EE061" ■ Low Dew Point Calibrator "FPG" ■ Temperature and Humidity Calibrator "CGS240" *For more details, please refer to the PDF document or feel free to contact us.

● Direct analog output from the probe ● Analog output 0-5 VDC or 0-10 VDC ● Measurement range: 0-1 m/s or 0-2 m/s ● Competitive pricing structure ● Compact housing ● Easy installation ● Utilizes constant temperature thermal principle and thin-film technology ■ The EE576 wind speed transmitter is primarily developed for HVAC applications. Due to its compact size with a probe length of 150 mm, it can be used in various applications beyond HVAC. Additionally, it provides direct analog output from the small probe. The probe comes with a 0.5 m cable (2 m available as an option) and can be easily installed in tight spaces with the standard included flange. It operates on a power supply of 10-19 VDC or 19-29 VDC. The measurement range can be selected from 0-1 m/s or 0-2 m/s, and the analog output can be chosen from 0-5 V or 0-10 V.

● Backflow prevention feature ● Sealed O-ring ● Probe positioning ● Convection error cut-off feature ■ The EE776 is a thermal mass flow meter specifically designed for monitoring compressed air, nitrogen, CO₂, and other non-corrosive and non-flammable gases. It can be used in pipes ranging from DN50 to DN700 (2 to 28 inches) at pressures up to 16 bar (232 psi).