テクネ計測 List of Products and Services

Various devices can be connected and used immediately. ■ Can be installed on a tabletop, easy to carry and move. Additionally, it can be used for purposes other than a dew point meter. ■ Main applications: For the display of the TK-100/TE-660 dew point meter series, For the display of the Model 65 oxygen meter, and for the display of other devices, For PPM display (optional). For more details, please download the catalog.

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ TFT display option available* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter installed in TKZH002 uses a polymer sensor utilizing thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter for high humidity and harsh environments. It is a high-performance, high-response moisture meter with minimal aging changes. Since it provides continuous online measurements, it alerts you to moisture levels and the timing for oil replacement before water contamination affects insulation performance.

★It can be installed as is and used immediately! This is an all-in-one type of installed dew point meter. It comes with a built-in filter, needle valve, and flow meter. The dew point meter is equipped with the well-regarded Tekne measurement company's capacitive dew point meter TK-100 or the polymer dew point meter TE-660 for measuring the dew point inside the furnace. For more details, please download the catalog.

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter based on application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and necessary sampling equipment. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd., known for its expertise in furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

■ Easy installation with all-in-one design ■ Simple operability ■ Choose a dew point meter based on application TK: Low dew point TK-100 dew point meter built-in TE: Medium dew point TE-660 dew point meter built-in ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is an all-in-one wall-mounted dew point meter equipped with a dew point meter and the necessary sampling equipment for measurement. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 from Techne Measurement Co., Ltd., known for furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

■ Ideal for spot checks ■ Simple operability ■ Choose from PPM model or % model ■ For measuring atmosphere in furnaces ■ For measuring atmosphere in tanks This product is an all-in-one portable oxygen meter equipped with a sampling device necessary for oxygen measurement. It includes a filter, pump, needle valve (built into the oxygen meter), flow meter (built into the oxygen meter), ball valve for sealing the oxygen sensor, and a bypass line. This allows for complete oxygen measurement in general environmental conditions. Additionally, for applications with a lot of dust, an external pre-filter is available as an option. The oxygen concentration meter is equipped with the AMI galvanic cell oxygen meter 2001LC (for ppm measurement) or 201LC (for % measurement), which are well-regarded for measuring oxygen in furnaces. For more details, please download the catalog.

● Dedicated model for glove boxes ● Galvanic type resistant to combustible gases and organic solvents ● Choose from PPM model or % model ● Minimal leakage due to ALLSUS piping inside the device ● Excellent operability and maintainability ■ This unit can measure oxygen concentration at ppm or % levels depending on the application. It has a built-in flow meter, needle valve, and pump, allowing for easy measurement of ppm level oxygen concentration by simply connecting to the sample IN/OUT. For more details, please download the catalog or contact us.

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

Following the measurement control panels for heat treatment furnaces, a common application produced by Techne Measurement is the measurement of dew point, oxygen concentration, and hydrogen concentration in compressed air and various gases (such as nitrogen, argon, hydrogen, methane, etc.). In this application, since the pressure is usually positive, there is no need to accommodate negative pressure from pumps; instead, it is necessary to manage positive pressure using regulators and similar devices. Additionally, depending on the gas, it may be necessary to address contamination and the liquefaction of volatile substances.

In addition to measurement and control panels for heat treatment furnace applications and compressed air and various gas applications, we also manufacture measurement and control panels for various other applications and their peripheral devices in-house. We can also accommodate measurement control panels that contain only measuring instruments other than those sold by our company, so please feel free to contact us.

We have launched an (explosion-proof) oxygen concentration meter capable of measuring in ppm units, including a sampling device for measuring oxygen immediately after hydrogen purification by water electrolysis. ● Integrated sampling system ● Dual drain processing ● Measurement in ppm units ● Intrinsically safe explosion-proof certified product (overseas IEC/CSA certified) ● Galvanic battery type (electrochemical) patented sensor ● High response speed, long life, disposable proprietary developed patented sensor In hydrogen production through water electrolysis, if the performance of the permeable membrane is poor, oxygen ions can pass through the membrane, resulting in the generation of oxygen as an impurity. Therefore, by measuring the oxygen concentration immediately after the electrolytic cell, we evaluate the performance of the permeable membrane and manage the purity of hydrogen. Since oxygen in hydrogen can lead to high dew points and condensation, expertise such as drain removal is necessary for measurement. Utilizing our experience in oxygen concentration and dew point measurement, we have developed a product as a control panel that includes a sampling system. For more details, please check the basic information.

Various devices can be connected and used immediately. ■ Can be installed on a desk, easy to carry and move It can also be used for purposes other than a dew point meter. ■ Main applications For the display unit of the TK-100/TE-660 dew point meter series For the display unit of the Model 65 oxygen meter, and for other devices' display units For PPM display units (optional) For more details, please download the catalog.

■ Measurement using a probe from the top of the silo ■ Fire and explosion prevention measures for wood pellet storage silos ■ Equipment with barriers can be easily used in hazardous areas ■ Conversion to moisture-related physical quantities ■ Atmosphere measurement inside wood pellet storage silos ■ Maintaining accuracy up to 180°C

This product is an all-in-one portable dehumidifier that incorporates the necessary filter, pump, cooling device, and auto-drain device to dehumidify the atmosphere gas inside the furnace. With improvements to the switching power supply and internal structure, it has become lightweight and easy to carry, and the auto-drain function allows for complete operation from sampling to drainage with just this one unit. The representative devices built into this product are as follows: + Filter + Pump + Needle valve (built into the flow meter) + Flow meter + Cooling device + Auto-drain device

This product allows for the measurement of dew point, oxygen, and hydrogen concentrations with a single unit, and the combination of measuring instruments can be freely selected. It enables flow adjustments to match the sample line and allows for the measurement of 1-3 sample line systems. ● Measurement of dew point, oxygen concentration, and hydrogen concentration ● Gas measurement of sample lines 1-3 ● Customizable shapes and flow adjustments to meet customer needs with a wide range of options ● High-temperature environments are possible with optional panel coolers ● Furnace atmosphere measurement panel

Dry chlorine gas line measurement moisture analyzer panel, performing measurements of dry chlorine gas with a sampling equipment storage panel, and converting and outputting signals with a converter storage panel. ● Moisture analyzer storage panel ● Analysis panel for dry chlorine gas line measurement ● Can be changed to pole-mounted or wall-mounted depending on the installation environment ● Can accommodate high-temperature environments with an optional panel cooler ● Composed of two units: a sampling equipment storage panel for gas sampling and a converter storage panel that houses the signal converter.