リューベ List of Products and Services

The "AMS type" is an electric micro-dispensing gear pump system designed for small to large machinery, capable of continuous (recirculating) distribution of small to medium quantities. It is an electric gear pump unit that continuously supplies small amounts. 【Pump Specifications】 ○ Discharge Oil Volume → AMS-1: 1.25ml/min (50Hz) 1.5ml/min (60Hz) → AMS-3: 2.5ml/min (50Hz) 3ml/min (60Hz) → AMS-6: 5ml/min (50Hz) 6ml/min (60Hz) → AMS-15: 15ml/min (50Hz) 18ml/min (60Hz) ○ Discharge Pressure: 0.8MPa (Safety Valve Set Pressure) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "Resistive Intermittent Valve Flow Unit" is a low-cost, space-saving lubrication system for small machinery, featuring a resistive type proportional distribution valve for intermittent oil supply. Products compliant with RoHS standards are also available. 【Specifications】 ○ Normal operating pressure: 0.8 MPa or less ○ HSA: For oil supply point installation ○ HTU: For junction header ○ HJB: For PJ junction For more details, please contact us or download the catalog.

• valve

The "L8・L20 type" is a low-cost, space-saving lubrication system for small machinery, featuring a manual lubrication piston pump. It is a pump that discharges by pushing the lever down with a spring. 【Specifications】 ○ Discharge oil volume: 2–7ml/stroke (adjustable) ○ Discharge pressure: 0.5MPa ○ Usable viscosity range: 32–1300mm²/S ○ Effective tank capacity: 0.8l (L8) 1.8l (L20) ○ Weight: 1.2kg (L8) 1.8kg (L20) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "LK type" is a low-cost, space-saving lubrication system for small machinery, featuring a manual lubrication piston pump. It can be set inside the machine. 【Specifications】 ○ Discharge oil volume: 8ml/stroke ○ Discharge pressure: 0.35MPa ○ Weight: 0.32kg (LK) 0.75kg (LK-8T) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "L3・L5 type" is a low-cost, space-saving lubrication system for small machinery, featuring a manual lubrication piston pump. It is a compact manual piston pump. 【Product Lineup】 ○ L3 type: 220ml resin tank type ○ L5 type: 400ml resin tank type For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "AMR-III DS type" is a low-cost, space-saving lubrication system for small machinery, featuring an electric intermittent discharge gear pump. It is an automatic intermittent pump with a long track record and high reliability. 【Pump Specifications】 ○ Discharge oil volume: 150ml/min (50Hz) 180ml/min (60Hz) ○ Discharge pressure: 0.8MPa (safety valve set pressure) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "EX-5 type" is a low-cost, space-saving lubrication system for small machinery, featuring an electromagnetic drive lubrication dispensing piston pump. It is a compact and lightweight intermittent dispensing piston pump with low power consumption and minimal discharge. 【Pump Specifications】 ○ Discharge oil volume: 0.5ml/stroke ○ Discharge pressure: 0.2MPa For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "EX type" is a low-cost, space-saving lubrication system for small machinery, featuring an electromagnetic drive intermittent discharge piston pump. It is an economical intermittent discharge piston pump that uses a solenoid for driving power, with no standby power consumption. 【Pump Specifications】 ○ Discharge oil volume: 0.4 to 0.9 ml/stroke (adjustable) ○ Discharge pressure: up to 0.4 MPa For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "MMX-II type" is a low-cost, space-saving lubrication system for small machinery, featuring an electric intermittent discharge piston pump. It is a highly reliable pump developed through long-standing experience. 【Pump Specifications】 ○ Discharge Oil Volume → 1.5–2.5 ml/stroke → 2.5–5.5 ml/stroke ○ Discharge Pressure: 0.4 MPa For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "MMXL-III type" is a low-cost, space-saving lubrication system for small machinery, featuring an electric intermittent discharge piston pump. It uses an energy-efficient motor and can automatically discharge intermittently with just the power supply, making it an economical pump. It has a wealth of proven performance in small machines and is adopted in a wide range of fields. Both standard and CE-compliant models are available. 【Pump Specifications】 ○ Discharge Oil Volume → 0.2–1.0 ml/stroke → 1.5–2.5 ml/stroke → 2.5–5.5 ml/stroke ○ Discharge Pressure: 0.3 MPa For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "MLZ type" is a low-cost, space-saving lubrication system for small machinery, featuring an electric intermittent discharge small piston pump. It is a sister product of the MMXL type and is suitable for small machines with limited installation space. Both standard and CE-compliant models are available. 【Pump Specifications】 ○ Discharge oil volume: 1.5 to 2.5 ml/stroke ○ Discharge pressure: 0.3 MPa For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "MIX・MIX-A type" is a quantitative valve system compatible with large machinery, designed for oil-air quantitative dispensing. It transports oil using air while atomizing it into fine particles, continuously supplying it to lubrication points (such as bearings, chains, gears, screws, cams, slides, rollers, etc.). It is ideal for forming a thin oil film. 【Specifications】 ○ Discharge oil volume → MIX: 0.01, 0.03, 0.05, 0.1, 0.2 ml/stroke → MIX-A: 0.005, 0.01, 0.015, 0.03, 0.05 ml/stroke ○ Operating pressure: 1.0 MPa ○ Return pressure: 0.2 MPa (0.15 MPa for MIX-A) For more details, please contact us or download the catalog.

• valve

The "DVR type" is a quantitative valve system compatible with large machinery, designed for adjustable discharge volume. It quantitatively discharges oil pumped from PM type pumps. 【Specifications】 ○ Discharge oil volume: 0.03, 0.05, 0.1, 0.2, 0.3, 0.5 cc/stroke ○ Operating pressure: 1.2 MPa ○ Return pressure: 0.5 MPa For more details, please contact us or download the catalog.

• valve

The "MB type" is a quantitative valve system compatible with large machinery, featuring a piston-type spring pressure quantitative valve. The discharge can be confirmed by the movement of a pin, and it discharges at low pressure using a spring. 【Specifications】 ○ Discharge oil volume: 0.03, 0.05, 0.1, 0.2, 0.3, 0.5 ml/stroke ○ Operating pressure: 1.0 MPa ○ Return pressure: 0.2 MPa ○ Normal operating pressure: 1.5 to 2.5 MPa ○ Discharge volume error tolerance range: ±20% For more details, please contact us or download the catalog.

• valve

The "PVS type" is a junction for the large machinery-compatible quantitative valve system and the MOS type quantitative valve. The valve mounting port is specifically M10×1 for MOS. Please use a closure plug (BPS) to seal any unused mounting ports. If you wish to connect piping, please use an adapter (SAS). Additionally, we also offer the main piping branch junction "PJ type" and the junction "JV type." 【Product Lineup】 ○ Single type for 2 to 8 ports: PVS-2S to PVS-8S → Material: Zinc die-cast (ZDC) ○ Double type for 2 and 4 ports: PVS-2D, PVS-4D → Material: Zinc die-cast (ZDC) For more details, please contact us or download the catalog.

• valve
• Pipe Fittings

The "MOS type" is a quantitative valve system compatible with large machinery, featuring a space-saving ultra-compact quantitative valve. It operates in a parallel configuration with direct pressure, offering four different discharge volumes per stroke. It is ideal for small machines or machines with limited space. 【Specifications】 ○ Discharge oil volume: 0.01, 0.03, 0.05, 0.1 ml/stroke ○ Operating pressure: 0.9 MPa ○ Return pressure: 0.3 MPa For more details, please contact us or download the catalog.

• valve

The "PV type" is a junction for the large machinery compatible quantitative valve system and the MO type quantitative valve. It is used when branching with the MO type quantitative valve. We offer single types for 1 to 8 ports and double types for 2 to 12 ports. 【Product Lineup】 ○ Single type for 1 to 8 ports: PV-1 to PV-8 → Material: Zinc die-cast (ZDC) ○ Double type for 2 to 12 ports: PV-2D to PV-12D → Material: Brass (C3604) For more details, please contact us or download the catalog.

• valve
• Pipe Fittings

The "MO type" is a quantitative valve system compatible with large machinery, featuring a direct pressure-operated quantitative valve. It has a parallel type direct pressure operation with 9 different discharge volumes available, which can be selected based on the required lubrication amount. 【Specifications】 ○ Discharge oil volume: 0.03, 0.05, 0.1, 0.2, 0.3, 0.5 ml/stroke ○ Operating pressure: 1.0 MPa ○ Return pressure: 0.3 MPa For more details, please contact us or download the catalog.

• valve

The "JVPA type" is a junction for the large machinery-compatible quantitative valve system, specifically for MO2 and MO2C type quantitative valves. It is used when branching with MO2 and MO2C type quantitative valves. We offer connector assembly "type SCP," plug assembly "type BPP," single type for 1 to 12 ports, and double type for 2 to 16 ports. 【Product Lineup】 ○ Connector assembly: Type SCP Code No. 619803 → Material: Brass (BS material C3604) ○ Plug assembly: Type BPP Code No. 619802 → Material: Iron (SUM24) ○ Single type for 1 to 12 ports: JVPA-1S to JVPA-12S ○ Double type for 2 to 16 ports: JVPA-2D to JVPA-16D For more details, please contact us or download the catalog.

• valve
• Pipe Fittings

The "MO2 type and MO2C type" are large machinery compatible metering valve systems, direct pressure-operated metering valves. The adoption of straight threads and quick-connect fittings has made installation and piping work to the junction easier. 【Specifications】 ○ Discharge oil volume: 0.03, 0.05, 0.1, 0.2, 0.3, 0.5 ml/stroke ○ Operating pressure: 1.0 MPa ○ Return pressure: 0.3 MPa For more details, please contact us or download the catalog.

• valve

The "LT-S type" is a quantitative valve system compatible with large machinery, featuring a manual high-pressure intermittent discharge piston pump. It is suitable for machines that require oiling several times a day and is integrated with the tank. 【Pump Specifications】 ○ Discharge oil volume: 8ml/shot ○ Discharge pressure: 3.4MPa (set pressure of safety valve) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "AMI-300S and AMI-1000S models" are quantitative valve systems compatible with large machinery, featuring an electric intermittent discharge gear pump. They can be used as standalone pumps and are suitable for large machines with multiple lubrication points. 【Specifications】 [Pump] ○ Discharge oil volume → AMI-300S: 300ml/min (50Hz) 330ml/min (60Hz) → AMI-1000S: 1000ml/min (50Hz) 1100ml/min (60Hz) ○ Discharge pressure: 2.5MPa (set pressure of safety valve) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "PM type" is a quantitative valve system compatible with large machinery and a quantitative spraying pump for processing oil. It is an air-driven pump that operates the piston by opening and closing a three-way solenoid valve. 【Specifications】 ○ Pump ratio 1:5 (Air pressure 0.5MPa) ○ Discharge volume 8cc/shot (6cc, 7cc - made to order) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "AMZ-III Type [CE Compliant Type]" is a gear pump system designed for large machinery, featuring an electric intermittent discharge type. It is a lightweight and compact pump unit without a control device, compliant with European safety standards. It comes standard with an oil level switch and a pressure switch. 【Specifications】 [Pump] ○ Discharge oil volume: 90ml/min (50Hz) 110ml/min (60Hz) ○ Discharge pressure: 1.5MPa (safety valve set pressure) [Motor] ○ Voltage/Current → AC100Vφ1/1.5A AC200Vφ1/0.8A (50Hz) → AC100Vφ1/1.3A AC200Vφ1/0.7A (60Hz) ○ Output: 19W (50Hz) 18W (60Hz) Kuma-tori motor For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

We would like to introduce peripheral devices for grease systems, including solenoid valves and filter regulators. Rübe Corporation offers environmentally friendly products. We actively promote the reduction of resources (oil and electricity) and are also engaged in activities related to product recycling. 【Product Lineup】 ○ Solenoid Valves ○ Filter Regulators For more details, please contact us or download the catalog.

• Lubricants

The peripheral device for the grease system, "Proportional Quantitative Valve Proximity Sensor," is a device that electrically detects the operation of the detection pin of the proportional quantitative valve. It can confirm the operation of the pin within the set discharge time of the pump and display normal or abnormal conditions using the proximity sensor. The "Iron Powder Concentration Meter" allows for easy on-site diagnosis of abnormalities in bearings and gears of grease-lubricated rotating machines. 【Product Lineup】 [Proportional Quantitative Valve Proximity Sensor] ○ Model: E2E-X2E1 Code NO. 733225 ○ Model: E2F-X2E1 Code NO. 730797 ○ Model: E2F-X2Y1 Code NO. 730721 [Iron Powder Concentration Meter] ○ Model: SDM-72 Code NO. ― For more details, please contact us or download the catalog.

• Lubricants
• Sensors
• Other measurement, recording and measuring instruments

The peripheral device of the grease system, the "Grease Vacuum Cleaner," powerfully sucks up grease using only air supply. It is a compact type that can be portable. It significantly reduces the amount of rags used. The set includes a silent filter, air cock for vacuum ON/OFF, air connection port, and a 1.5m suction hose. 【Model】 ○ Model: VACUUMER ○ Code NO. 222301 ○ Height × Width: 340 × 270 mm ○ Weight: 3.4 kg For more details, please contact us or download the catalog.

• Industrial Vacuum Cleaners
• Lubricants

The peripheral equipment for the grease system includes "refill grease pumps," air-driven drum pumps, hand grease guns, and lube packs. The "air-driven drum pump" allows for grease filling using air pressure. The "hand grease gun" has a discharge volume of 1.2 mL/stroke and a maximum pressure of 40 MPa. The "lube pack" has a content volume of 300g per unit, with 24 units per box. 【Product Lineup】 ○ Air-driven drum pump: Model P3-C, Code No. JC0005 ○ Hand grease gun: Model LG-400, Code No. 252422 ○ Lube pack: Model XP-0, Code No. 250036 For more details, please contact us or download the catalog.

• Lubricants
• others
• Other pumps

The peripheral device of the grease system, the "pressure gauge," allows for visual confirmation of the normal and abnormal discharge pressure of the pump. The accuracy is ±3% F.S, the temperature range is -5°C to 40°C, and the material is Bourdon tube C6872T (C5191T for pressures above 10MPa), with the outer frame made of SPCC steel plate. 【Product Lineup】 ○PB100 ○PB250 ○GV50-G ○GV50-R For more details, please contact us or download the catalog.

• Pressure

We will introduce the peripheral devices of the grease system. The "controller" is used for electric grease pumps and allows you to set the discharge operation time and discharge pause time as desired. The "power box" is for GM type electric pumps, and the "pump mounting plate" is used to secure the GM type electric pump to the controller or power box. 【Product Lineup】 [Controller] ○GMC-S100/GMC-S200/GMC-ST-100/GMC-ST-200 [Power Box] ○GMP-100/GMP-200 [Pump Mounting Plate] ○GBP For more details, please contact us or download the catalog.

• others
• Other pumps

The "Shimarube Automatic Grease Feeder" allows for maintenance-free automatic grease feeding, with the ability to freely set the feeding period (1 to 12 months). It can continuously feed grease day and night without the need for battery replacement or external power for one year. The transparent PET container allows for constant visual confirmation of usage and operational status. 【Shimarube Automatic Grease Feeder】 ○ Model SL-01 【Connection Adapter】 ○ SCS-R: Code No. 106093 ○ SCS-6A: Code No. 166150 For more details, please contact us or download the catalog.

• Lubricants
• others

The "LHL(R) type" is a lubricant that combines the advantages of oil and grease. It was developed to address and solve issues such as the deterioration and foul odor of coolant due to oil lubrication, excessive oil consumption, lubrication failures caused by sticking and insufficient intervention in component parts with grease lubrication, and the excessive discharge of grease in lubrication areas, making it suitable for the environmental conditions and component parts of machine tools. 【Features】 ○ Excellent load-bearing capacity ○ Wear resistance ○ Excellent water resistance ○ Rust prevention ○ Excellent intervention capability For more details, please contact us or download the catalog.

• Lubricants

Introducing Ryuube's original grease. We offer a lineup of high-performance greases including the lithium-based premium multi-purpose grease "MP" with excellent mechanical stability and heat resistance, the high-performance grease "FS" for high load applications, the high-performance grease "LFL-H1" for food, medical, and cosmetic machinery with excellent pumpability and compatibility, the high-performance grease "YS2" suitable for lubricating ball screws and guide parts in high load and high stress environments, and the special urea-based high-performance grease "CBT." 【Product Lineup】 ○ MP: Lithium-based premium multi-purpose grease MP0(1)-4/MP0(1)-7 ○ FS: High-performance grease for high load applications FS2-2/FS2-4/FS2-7 ○ LFL-H1: High-performance grease for food, medical, and cosmetic machinery LFL-H1-4 ○ YS2: High-performance grease for high load applications YS2-4/YS2-7 ○ CBT: Special urea-based high-performance grease CBT-SU03-02 For more details, please contact us or download the catalog.

• Lubricants
• others

The "manual centralized grease supply machine" allows for the centralization of lubrication work even when using a grease gun, preventing oversight in lubrication and ensuring reliable maintenance. It also frees users from lubrication tasks in high or hazardous locations, and is characterized by easy installation and low cost. There are two methods: the nipple block method and the grease metering valve block method. 【Features】 [Nipple Block Method] - By consolidating the grease nipples installed at various lubrication points on the machine into one location, it achieves labor-saving lubrication work at a low cost. [Grease Metering Valve Block Method] - MG2 Valve Block Method → A combination of the MG2 type metering valve and grease nipples. - AP, SP Valve Block Method → By attaching nipples to AP and SP valves, lubrication can be performed at up to 12 points using a grease gun. For more details, please contact us or download the catalog.

• Lubricants
• others

The "EGME-T type" is a twin-type electric pump with a main piping depressurization operation type/pressure progression operation combined system designed for small to medium-sized machinery. By switching the solenoid valve, it can be used for both pressure progression and main piping depressurization. It is an energy-saving type that reduces power consumption. Please use the manufacturer's recommended cartridge grease and avoid greases that contain components that can damage brass and rubber. 【Specifications】 [Pump] ○ Flow rate: 10ml/min ○ Discharge pressure: 10MPa (safety valve setting pressure) [Voltage/Current DC24V] ○ Motor: 20W/0.8A ○ Depressurization solenoid: 10W/0.4A ○ Total: 30W/1.2A For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "EGM-T type" is a twin electric pump system for small to medium-sized machinery, featuring a main piping depressurization operation type and a pressure progression operation combined system. By switching the solenoid valve, it can be used for both pressure progression and main pipe depressurization. Please use the manufacturer's recommended cartridge grease and do not use grease containing components that can damage brass and rubber. 【Specifications】 [Pump] ○ Discharge volume: 10ml/min ○ Discharge pressure: 10MPa (safety valve setting pressure) [Voltage/Current DC24V] ○ Motor: 20W/0.8A ○ Depressurization solenoid: 26W/1.1A ○ Total: 46W/1.9A For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "AP type/SP type" is a pressure-operated quantitative valve system for small to large machinery. The operation of the valve's indicator pin can also be monitored electrically using a proximity sensor. The discharge volume is 0.2cc/stroke, with outlet diameters of 6mm and 4mm, a maximum operating pressure of 20MPa, and a minimum operating pressure of 2MPa. 【Specifications】 ○ Inlet: Rc1/8 ○ Usable consistency range: NLGI No.000 to No.2 ○ Monitoring mechanism: Indicator pin (K type) ○ Material: AP aluminum die-cast, SP aluminum For more details, please contact us or download the catalog.

• valve

The "EGH type" is a small, low-cost manual pump that operates on a pressure progression mechanism. There are grease-filled models "EGH-3P" and cartridge models "EGH-2C" and "EGH-4C." The pump has a discharge volume of 1ml per stroke, a discharge pressure of 10MPa (safety valve setting pressure), and a weight of 1.4kg, with a pressure release mechanism that activates when the handle is stored. 【Features】 ○ Pressure progression mechanism ○ Compact size ○ Low cost ○ Manual pump ○ Available in grease-filled and cartridge types For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "GMNH Type (High Pressure Type)" is a pressure progression actuated quantitative system and electric pump for small to large machines. When combined with a pressure progression actuated quantitative valve, it is an electric pump for cartridges that can vary the discharge amount from small to medium based on the pump's operating time. Please use the manufacturer's recommended grease and do not use grease that contains components that can damage brass and rubber. 【Specifications】 ○ Usable consistency range → Cartridge grease NO.000, 00, 0, 1 (Lithium-based) ○ Recommended grease: Lube Original Grease MP0, MP1, FS2 ○ Cartridge capacity: 400ml, 700ml cartridge ○ Weight: 2.8kg (DC24V), 3.1kg (AC100V, 200V) For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

The "GMN type" is a pressure-operated quantitative system and electric pump for small to large machinery. In combination with a pressure-operated quantitative valve, it can vary the discharge amount from small to medium based on the pump's operating time. Recommended greases are MP0, MP1, and FS2, with a usage consistency range of NLGI No. 000, 00, 0, and 1 (lithium-based). 【Specifications】 [Pump] ○ Discharge amount: 20ml/min ○ Discharge pressure: 8MPa (safety valve setting pressure) [Motor] ○ Voltage/Current: DC24V/1A ○ Output: 15W DC brush motor For more details, please contact us or download the catalog.

• Lubricants
• Other pumps

We introduce a main piping depressurization actuated quantitative valve system for small to medium-sized machinery, along with junctions for main piping connections, branching, and MGI-type quantitative valve installations. The materials available are zinc die-cast (ZDC) and brass (C3604). We offer a lineup ranging from single type for 1 port to 8 ports, and double type for 2 ports to 12 ports. 【Product Lineup】 ○ JV-2: Code NO. 206470 ○ JV-3 to 10S: Single type for 1 port to 8 ports ○ JV-4D to JV-14D: Double type for 2 ports to 12 ports For more details, please contact us or download the catalog.

• valve
• Pipe Fittings

The "GPL type" is a pressure relief actuated quantitative valve system for small to medium-sized machinery, specifically designed for grease. Unlike regular pressure switches, it has high reliability and a long lifespan, preventing grease stagnation inside. Do not use it at the very end of the main piping. 【Product Lineup】 ○ Model GPL-30: Code No. 209282 ○ Model GPL-55: Code No. 209392 For more details, please contact us or download the catalog.

• switch

The "MGLA type" is a main piping depressurization-operated quantitative valve system for small to medium-sized machinery, featuring an electric grease discharge detection valve. It is a quantitative valve that electrically confirms each discharge. It is particularly suitable for critical lubrication points, and by using it at the very end lubrication points, it allows for the confirmation of pressure increase and depressurization in the main piping. By counting the number of operations, it enables management of the total grease amount and timing for cartridge replacement. 【Specifications】 ○ Discharge volume: 0.1, 0.2, 0.3, 0.5 ml/stroke ○ Operating pressure: 2.5 MPa ○ Reset pressure: 1.2 MPa ○ Contact capacity: AC125V 2A, AC250V 2A, DC30V 2A For more details, please contact us or download the catalog.

• valve

The "MGI type" is a main piping depressurization actuated quantitative valve system for small to medium-sized machinery, and a quantitative valve for visually checking grease clogging. In the event that a lubrication point becomes clogged, a red pin pops out to confirm the abnormality. When installing the junction, please use a wrench to screw it into the main body. When connecting the piping, hold the nipple with a wrench and turn the bushing. If the valve is not in use, do not plug the valve; instead, remove the valve and plug it directly into the junction. 【Specifications】 ○ Operating pressure: 1.5MPa ○ Reset pressure: 0.5MPa ○ Detection pin operating pressure: 1.5MPa For more details, please contact us or download the catalog.

• valve

The "JVPA type" is a main piping decompression actuated quantitative valve system for small to medium-sized machinery, and it is a junction for MG2 and MG2C type quantitative valves. It is used when installing and branching MG2 and MG2C type quantitative valves. We offer connector assemblies of type SCP, plug assemblies of type BPP, single types for 1 to 12 ports, and double types for 2 to 16 ports. 【Product Lineup】 ○ Connector Assembly: Type SCP Code No. 619803 → Material: Brass (BS material C3604) ○ Plug Assembly: Type BPP Code No. 619802 → Material: Iron (SUM24) ○ Single Type for 1 to 12 ports: JVPA-1S to JVPA-12S ○ Double Type for 2 to 16 ports: JVPA-2D to JVPA-16D For more details, please contact us or download the catalog.

• valve
• Pipe Fittings