ホッティーポリマー List of Products and Services

"Sube Up" is a unique extruded product formed simultaneously with a thin film of special slippery resin, which helps prevent sticking and improve sliding properties. Additionally, by forming a special layer on the surface, it can reduce contamination from mold and the adhesion of dirt, thereby enhancing resistance to contamination. 【Features】 ■ The coefficient of friction (μ) is as low as that of fluororesin ■ Superior wear resistance compared to nylon ■ Does not use plasticizers, making it less prone to mold ■ Easy to clean due to its dirt-resistant properties ■ Passed low-temperature impact tests at -30°C ■ Extremely small changes in physical properties over time, making it durable for long-term use *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts

The material of the "Sube Up Electric Decoration Long Waterproof Cover" can be chosen from olefin-based elastomers and styrene-based elastomers. Super View Up, which is an olefin-based elastomer, has high transparency and excellent weather resistance, but there are limitations to the design flexibility. 【Features】 ■ Long and soft material, making it suitable for outdoor electric decorations ■ Significant reduction in assembly time allows for substantial cost savings ■ Unlike silicone rubber, it has good adhesion with double-sided tape and is resistant to tearing ■ The ends can be treated with welding, so unlike silicone rubber, there is no need for waterproof caps ■ Recyclable and does not produce dioxins when burned *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Sube Up Tube" is a polyolefin extrusion tube that has a specially lubricious resin simultaneously molded on its inner surface. 【Features】 ■ The smooth inner surface makes wire threading easy. ■ Extruded products with special lubricious resin processing on both the interior and exterior are also possible. ■ Excellent wear resistance, weather resistance, scratch resistance, stain resistance, and low odor. ■ Environmentally friendly as it does not use plasticizers or halogens. ■ Shows strong resistance to chemicals such as acids, alkalis, and alcohols. ■ The special lubricious resin adheres as a thin film, providing excellent cost performance. *For more details, please refer to the PDF document or feel free to contact us.

• tube

"HP Flock" is a revolutionary extruded product that enables the electrostatic flocking process, which has been used in automotive weather strips and other applications, through a special processing method, allowing for cost reduction and improved environmental performance. Electrostatic flocking involves applying adhesive to the product and using static electricity to insert fibers into the product's surface, making it a labor-intensive process that can dirty the work environment and lead to increased costs due to secondary processing. Thanks to its unique processing method, this product eliminates the need for drying operations like those required in electrostatic flocking, allowing for cost savings. Additionally, by not using large amounts of solvents such as primers or adhesives during manufacturing, and by reducing drying processes, it can decrease CO2 emissions, making it possible to create products with lower environmental impact. The standard flock is made of nylon with a density of 3.3 dtex and a pile length of 0.5 mm, but other options for density, pile length, and material changes to polyester are also available. Moreover, the creation of colored products, multiple processing points on a single cross-section, and depending on the shape, molding with our special low-friction resin "Sube Up" is also possible. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements

PEEK (Polyether Ether Ketone) resin is a super engineering plastic with very excellent properties, but special technology is required to mold stable tubes through extrusion. Our company sells standard sizes, but we can also accommodate custom requests. 【Features】 ■ Heat resistance: Continuous use is possible in environments up to 260°C. ■ Wear resistance: Exhibits outstanding wear resistance with a very low coefficient of friction. ■ Chemical resistance: Shows excellent resistance to various chemicals. ■ Hydrolysis resistance: Demonstrates resistance to water and steam under high temperature and high pressure. ■ Impact resistance: Exhibits high strength even in harsh environments. ■ Flame retardancy: Has UL V-0 flame retardancy. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Ultra-Fine Polyimide Tube" is a tube extruded from polyimide resin (TPI) that excels in heat resistance. Thermoplastic polyimide (TPI) has excellent heat resistance, sliding properties, and environmental characteristics, with a glass transition temperature of approximately 250°C, which offers superior properties compared to other thermoplastic super engineering plastics. 【Features】 ■ Heat Resistance: Usable up to 240°C ■ Sliding Properties: Low dynamic friction coefficient and excellent wear resistance ■ Environmental Characteristics: Lower outgassing and metal impurities compared to other super engineering plastics, allowing for applications in clean environments ■ Stability: Excellent plasma resistance, radiation resistance, and electrical properties *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Silicone Rubber Coated PEEK Tube" is a revolutionary composite extrusion product made of silicone rubber and PEEK resin. *In addition to silicone rubber, tubes coated with elastomers can also be manufactured. [Features] ■ Excellent sealing performance due to the silicone rubber or elastomer coating ■ Capable of providing excellent interference performance ■ Even when high-temperature liquids flow through the PEEK tube, heat is less likely to transfer outside ■ Design aesthetics can be added ■ Excellent flexibility ■ Cost performance is superior due to the ability to design thin-walled PEEK resin *For more details, please refer to the PDF materials or feel free to contact us.

• tube

LM-ETFE (ethylene-tetrafluoroethylene copolymer) resin is a thermoplastic fluoropolymer that possesses characteristics not found in conventional ETFE, such as low melting point and transparency. It has higher heat resistance than ETFE and can be used over a wide temperature range from -200 to 180°C. Additionally, compared to conventional ETFE, it excels in flexibility and mechanical strength, has high transparency from the visible to ultraviolet range, and features high surface smoothness, low wear resistance, non-stick properties, and water and oil repellency, further enhancing its surface characteristics and reducing fluid resistance. It also exhibits excellent chemical resistance, electrical properties, and flame retardancy, allowing for the addition of characteristics that enhance the performance of conventional ETFE. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements

"Polybutadiene tube" is a lightweight, rubber-like tube that has non-slip properties. It has good gas permeability and transparency, and is an excellent flexible product. Due to its crystalline resin, it can reduce the adhesion of infusions to the inside of the tube when used as an infusion tube compared to PVC tubes. Additionally, because it does not contain plasticizers, it is suitable for use in products for infants and pregnant women, and it is appropriate for medical use as it does not absorb active pharmaceutical ingredients (APIs). Furthermore, for food packaging applications, it complies with Ministry of Health, Labour and Welfare Notification No. 20. In terms of environmental impact, there are no harmful gases such as chlorine gas or nitrogen compounds generated when incinerated. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "plant-derived polyamide tube" is a nylon tube made from castor oil, which is contained in the seeds of the castor plant. It has superior properties compared to nylon 6 and 6,6. 【Features】 ■ Usable from -40 degrees to 130 degrees ■ Density of 1.03g/cm3, enabling lightweight products ■ Excellent flexibility ■ Excellent chemical resistance ■ Allows continuous use at approximately 90 to 100 degrees ■ Excellent impact resistance *For more details, please refer to the PDF document or feel free to contact us.

• tube

"TPX (polymethylpentene)" is a resin that excels in transparency, heat resistance, and chemical resistance. As a mandrel, it has a low surface tension of 24 dyne/cm, which contributes to excellent moldability and contamination resistance. Additionally, it has distinctive thermal properties, demonstrating superior heat aging resistance and steam (boiling water) resistance. Leveraging these characteristics allows for a reduction in the rubber vulcanization process during the manufacturing of rubber hoses, leading to lower processing costs. Furthermore, its low water absorption rate ensures good dimensional accuracy of the mandrel, enabling the achievement of excellent inner diameter precision in rubber hoses. In recent years, it has also gained attention as a mandrel for carbon products such as C-FRP, utilizing the aforementioned properties. While common equipment often results in numerous voids, our company has made it possible to minimize void occurrence with specialized production equipment. Please consult us separately regarding the sizes that can be manufactured. *For more details, please refer to the PDF materials or feel free to contact us.*

• plastic

"HOTTY Gel" is a sticky and non-sticky extruded product with a very soft jelly-like consistency. 【Features】 ■ Continuous molding process allows for long lengths ■ Ultra-low hardness product provides excellent vibration absorption ■ Helps reduce noise ■ Available in both sticky and non-sticky types ■ Stickiness can be restored by washing with neutral detergent and drying ■ Can be produced in both transparent and colored versions ■ Does not fall under Rohs regulations or PRTR designated chemical substances ■ Hardness and stickiness remain unchanged even at -30°C *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Gergasket" is a composite extrusion vibration-damping material designed to improve usability by simultaneously molding the vibration-damping and water-tight functions of gel with elastomers. 【Features】 ■ Enhances vibration-damping and sealing properties in addition to the characteristics of Hottigeel ■ Allows for easy installation by combining components ■ Compatible with double-sided tape ■ Recyclable ■ Excellent cost performance ■ Free from RoHS regulated and PRTR designated chemicals ■ Hardness and adhesiveness remain unchanged *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Silicone Trim" protects edges and features a sealing part, providing airtightness, waterproofing, and dustproof capabilities. Additionally, it enables the creation of trims with the characteristics of silicone rubber, including high heat resistance, high chemical resistance, and long lifespan. Moreover, we offer 7 color options and a silicone (glow-in-the-dark) type, and since it is made of silicone rubber, it can be made conductive upon request. 【Features】 ■ Excellent heat and chemical resistance ■ Easy to install by simply sandwiching between metal plates or resin boards ■ No adhesives used, preventing contamination ■ Removable for easy maintenance ■ Color customization available upon request *For more details, please refer to the PDF document or feel free to contact us.

• others

"Eco Trim" is an all-plastic trim with a groundbreaking rigid resin framework. It is environmentally friendly and recyclable. Additionally, unlike conventional trims with metal core materials, the core material does not rust, and processes such as endless welding are possible. 【Features】 ■ Excellent environmental performance: Can be installed without using solvent-based adhesives by simply sandwiching. ■ Lightweight: The framework is not made of metal, allowing for weight reduction. ■ Rust resistance: The all-plastic material prevents the core from rusting like typical trims. ■ Recyclable: The material used is all olefin resin, making it recyclable. ■ Colorability: The resin material allows for coloring (consultation required). ■ Secondary processing: The all-plastic material enables processes such as endless welding, including the framework. *For more details, please feel free to contact us.

• Other machine elements

It can be easily installed just by sandwiching it between a metal plate or a resin plate. Additionally, since no adhesive is used, temporary fixing is not necessary, allowing for simplification.

• others

The "Flexible LED Lighting Unit" is a highly flexible unit with excellent electrostatic properties. By using a highly transparent resin housing and a special LED substrate with bend-resistant structure, the LEDs are protected even when bent at a radius of R50, allowing for installation that follows free curves. Additionally, based on customer requests, we can customize the size, length, housing color, housing design, number of LEDs, and LED colors. Please feel free to contact us. 【Features】 ■ No damage to LEDs even when bent at R50 ■ Complies with IEC529 IPX6 ■ Proven track record of being adopted as genuine parts by domestic automobile manufacturers ■ No damage to LEDs even in discharge tests at 25KV *For more details, please refer to the PDF materials or feel free to contact us.

• LED Module

"Polycarbonate extrusions" are covers formed by extrusion molding using polycarbonate resin, which excels in transparency and heat resistance. Polycarbonate resin is a material that boasts excellent transparency, heat resistance, and impact resistance. Additionally, as a transparent rigid resin with self-extinguishing properties, it is suitable for use as a cover material for lighting fixtures. Our company is capable of molding this polycarbonate from ultra-fine tubes to advanced custom extrusions. Please feel free to contact us. [Features] - Very high visible light transmission rate, demonstrating performance equivalent to acrylic - Can be utilized in fields where there are concerns about fire due to its self-extinguishing properties - Continuous use possible from -40 to 120°C - Excellent impact resistance that maintains performance even under -40°C conditions - Smaller molding shrinkage rate allows for more precise molding *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

"Eco Nennen" is an extruded flexible sealing material that is environmentally friendly and achieves a V-0 rating in the UL flammability test, with unprecedented hardness resistance. It can be molded into various shapes comparable to general polyolefin-based elastomers. It is suitable for sealing materials, gaskets, and packing related to electronics. 【Features】 - Achieved V-0 in UL flammability test standards - Does not use RoHS regulated substances - Very low smoke and carbon monoxide emissions - Good colorability due to being a resin - Capable of producing low hardness products *For more details, please refer to the PDF document or feel free to contact us.

• Sealing

"HOTTY Stattole" is a suitable product for areas that require static electricity measures and dust and contamination prevention. Not only does the surface have conductive properties, but the material itself also possesses these characteristics, enabling coloring that was impossible with carbon, as well as improving durability that was difficult with surfactants and antistatic agents. Additionally, due to minimal outgassing, it can maintain antistatic performance semi-permanently. Furthermore, it is possible to impart these properties to materials ranging from vinyl chloride to high-performance resins. 【Features】 ■ Antistatic performance is exhibited throughout the entire product, not just on the surface through coating or vapor deposition. ■ As an extruded product, it allows for long lengths. ■ Tubes and custom shapes can also be produced. ■ Low-contamination product that does not produce bleed or missing materials. ■ Excellent durability against repeated wiping and washing. *For more details, please refer to the PDF document or feel free to contact us.

• others

"Super View Up" is a transparent extrusion product developed with a new concept using a polyolefin-based material. It can be used as an alternative to PVC tubes, for devices that require transparency and design, as well as for packings, gaskets, sealing materials, and protectors in buildings. It is also possible to mold irregularly shaped extrusion products. Please feel free to contact us for more details. 【Features】 - Excellent weather resistance, impact resistance, scratch resistance, and low odor - Does not use plasticizers or halogens - Superior flexibility and heat resistance, with excellent rubber elasticity despite being non-crosslinked - Shows very strong resistance to acids, alkalis, and alcohols - Irregularly shaped extrusion products can also be molded *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Hottisofura" is an ultra-low hardness continuous extrusion foam product that is effective as a sealing material, insulation material, and protector. It is a product made from foamed EPDM with continuous bubbles, making it very soft and a low compression load material. Applications include gaskets, packing, sealing materials, sound-absorbing materials, and insulation materials for automobiles, civil engineering, construction, and various precision instruments. The range of applications is broad and diverse. We can discuss colors and hardness, so please feel free to contact us. 【Features】 ■ Very soft and low compression load material ■ So soft and high quality that it cannot be measured even with a hardness tester for foamed materials ■ Minimal degradation from ultraviolet rays and ozone, and excellent heat resistance ■ Manufactured using a continuous extrusion vulcanization line, so there are no length constraints ■ Excellent cost performance *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Sube Up Coat" is a cost-effective product for preventing adhesion and reducing sliding resistance, which is simultaneously coated onto continuously extruded rubber products. With a low friction coefficient of 0.3, it offers excellent slip properties. It is resistant to dust and dirt, and its smooth surface prevents the material from wrinkling. It has a wide range of applications, including construction parts, automotive parts, electronic equipment parts, and leisure goods. 【Features】 ■ Low friction coefficient of 0.3, providing excellent slip properties ■ For foamed rubber, a fluorine-impregnated coating film that follows elastic deformation ■ Resistant to dust and dirt, with a smooth surface that prevents wrinkling of the material ■ Effective in preventing adhesion, reducing squeaking sounds, and lowering sliding resistance ■ Very effective even when oils and greases cannot be used *For more details, please refer to the PDF document or feel free to contact us.

• others

It is a colored rubber molded through continuous extrusion vulcanization processing, with EPDM as the main material. The properties are solid rubber and foamed rubber.

• others

Water-absorbent rubber (Nonbee) is a blend of water-absorbent resin that expands by absorbing 100 to 1000 times its own weight in water, mixed into vulcanized rubber. This water-absorbent resin is safe and hygienic, and is also used in baby diapers, among other applications.

• Rubber