スターライト工業 List of Products and Services

◎Material selection is possible based on differences in requirements such as holding or braking. ◎Outstanding mass production capabilities with Starlight original injection molding materials! ◎In addition to thermoplastics and thermosetting resins, biomass materials are also available. *Please download the PDF document for material properties.

◎ The substrate is phenolic resin, so it does not melt during abnormal temperature rises. ◎ It has low temperature dependence and minimal strength reduction at high temperatures. ◎ This is a high-performance gear grade that can be used in high-temperature environments (our record is 250°C). * For more details, please refer to the PDF document or feel free to contact us. #Resin #Plastic #InjectionMolding #Hard #Phenolic #Thermosetting #Toughness #Gear #Gears #Mold #Material #HighStrength #EngineeringPlastics

<Features> - Based on super engineering plastic PEEK, it exhibits the highest level of durability and long lifespan performance for plastic gears. - Weighing about 1/6 of steel, it enables the lightweight design of gear units. - Excellent self-lubricating properties allow for grease-free operation. - Reduction of assembly man-hours is possible through insert molding technology. - It is compatible with grease-free gears and seal components, making it possible to propose grease-free units. If you are facing any of the following issues, please consult us! - I want to reduce the weight of assist suits, collaborative robots, and automatic transport equipment. - I want to prevent user clothing stains caused by grease leakage. - I want to improve the quietness of drive components. - I want to propose resin-based reduction gear solutions and miniaturize total units. *Please download the PDF document for material properties. #InjectionMolding #ThermoplasticResin #SuperEngineeringPlastic #EngineeringPlastic #EngineeringPlastic #PEEK #HeatResistant #Lightweight

Applications ● Environments that dislike dust and dirt ● Environments where static electricity needs to be suppressed ● Expansion to parts that require strength and sliding properties while preventing static charge *For more details, please download the catalog or feel free to contact us. #InjectionMolding #ThermoplasticResin #EngineeringPlastic #EngineeringPlastic #SuperEngineeringPlastic #Resin #Conductive

Our non-contact bearings utilize an air-lubricated bearing structure. Perfect for the cleanliness of food manufacturing! <Do you have any of these concerns?> - I want to achieve high cleanliness in manufacturing equipment. - I want to use it for low to high-speed rotation applications. - I want something that is resistant to corrosion. - I want to use it in food and pharmaceutical manufacturing equipment. *For more details, please download the catalog or feel free to contact us.

Starlight Industries has developed the resin material Esbear, maximizing the self-lubricating properties of plastic while adding the necessary heat resistance and mechanical characteristics for drive and transmission applications. Among the Esbear series, Esbear K2590 exhibits the highest level of durability in plastics. It achieves high added value through weight reduction, noise reduction, and grease-free operation, addressing the needs of those who want to "reduce the weight of components by even 1g" and "make them more compact and longer-lasting." <Features> - Exhibits excellent sliding performance under lubrication-free conditions exceeding 200°C - Maintains stable wear resistance even at ultra-high sliding speeds (10,000 rpm) - Reduces the issues of back face thickness, abnormal noise generation, and seizure that are weaknesses of metal-based sliding materials under high-speed conditions - Supports a wide temperature range with continuous use temperatures from -40°C to 260°C Starlight meets the advanced motion engineering demands of next-generation home appliances. *For more details, please download the catalog or feel free to contact us.

～Here’s how our fluorine (PTFE) differs!～ 【Shape Freedom and Mass Production】 - Our fluorine S-Bear can be injection molded. - By using molds, complex shapes can also be formed. This allows for reduced processing lead times and the combination of complex shapes with other components. It achieves a reduction in the number of parts in units and compacts the design. *Conventional methods using PTFE are also available. ～Unique properties not found in metals or other resins!～ 【Corrosion and Chemical Resistance】 - No worries about deterioration or corrosion from acids and alkalis! 【Non-Stick and Dirt Resistance】 - Non-stick with excellent dirt resistance. Reduces maintenance frequency and labor! 【Heat Resistance and Flame Retardancy】 - Usable at 260℃. Suitable for flame-retardant applications! 【Electrical Insulation】 - Excellent insulation, highly compatible with electronic applications! 【Lightweight】 - Achieves about 70% lighter compared to iron! <Examples of Applications> - Equipment using chemicals - Semiconductor manufacturing equipment - Ranges, ventilation fans, and home appliances *For more details, please refer to the PDF document or feel free to contact us.

<Case Studies for Problem Solving> - We are using metal ball bearings, but we want to reduce costs somehow... - We have to regularly replenish grease in the bearing components, which is cumbersome... For detailed test data and other information, please refer to the attached catalog. If you have any other concerns, please feel free to consult us.

Starlight Industrial's unique "Resin Reduction Gear" Even with resin, we have achieved high torque, long lifespan, and high reduction. ~ Currently offering four types with different reduction ratios. <Features> - Lightweight: Weighs only 1/3 compared to metal products. - Compact design: A flat reduction gear that saves space. - Maintenance-free and environmentally friendly. - Short delivery times are also possible. - Cost-effective compared to metal products. *Please download the PDF for details on the lineup (specifications).

We provide comprehensive support from customized design utilizing special differential planetary gears, multi-stage planetary gears, and gear trains to evaluation and analysis. The following reduction mechanisms are also available: ■ Special differential planetary (3K type) - A mechanism characterized by its lightweight, flat design, and high reduction ratio. ■ Multi-stage planetary (2K-H type) - A mechanism characterized by its small diameter, compactness, and ease of assembly. ■ Gear trains - Design and material proposals as alternatives to metal are possible. ~Mass Production Achievements~ Color printer "Multi-stage planetary (2K-H type)" - Cumulative total of 400,000 units. Electric lock for residential entrance doors "Special differential planetary (3K type)" - Cumulative total of 2 million units. We also possess numerous performance evaluation devices for reduction gears. For information on other mechanisms, examples of customized designs, and past achievements, please download from the link below.

To reduce the environmental impact on Earth, we have developed "pervio BP," the industry's first helmet shell made from plant-based bioplastic materials! ■ Features of "pervio BP" 1. Contributes to carbon neutrality It has obtained the biomass plastic mark (BP mark) for the first time in the helmet industry. Compared to conventional products, it reduces the amount of fossil resource materials used. *Biomass plastic mark registration No. 1012 (registered for the shell and visor parts only) 2. Scratch-resistant and long-lasting beauty It has excellent scratch resistance compared to conventional products (PC resin). Its appearance lasts longer even in harsh working environments. 3. Excellent breathability Without expanded polystyrene, it allows for good airflow and remains comfortable without getting stuffy. It can be washed thoroughly, making it easy to remove dirt and odors. *For more details, please refer to the catalog or feel free to contact us. ■ Usage Scenarios With the biomass plastic mark, you can promote your commitment to SDGs and sustainable initiatives! - Work helmets for the construction and manufacturing industries - Disaster prevention helmets - Helmets for lending to visitors - Renewals of work clothes or uniforms for anniversary celebrations

The fluororesin shaft seal "ALP Lip Seal" is an "Almighty Seal" that can be used as an alternative to oil seals and mechanical seals. It is said that the lifespan of bearings can be reduced to 1/5 to 1/3 due to dust contamination and to 1/10 due to water contamination. The ALP® Lip Seal maximizes the lifespan of bearings, contributing to reduced maintenance costs. It can also be used as a seal for high-pressure gases. 【Features】 ◆ Lubrication conditions: Usable under both oil and water conditions, as well as in non-lubricated conditions. ◆ Low friction: Reduces seal resistance, contributing to energy savings in machinery. ◆ Low wear: By using materials suitable for the operating conditions, a long lifespan of the seal can be expected. ◆ Low aggressiveness: The seal shape is designed to minimize damage to the opposing shaft, suppressing shaft roughness. ◆ Pressure resistance: Usable even in applications with high pressure. ◆ Heat resistance: Usable over a wide range from -50°C to 200°C. This seal is ideal for areas where oil seals cannot be used and where mechanical seals provide excessive performance. *For more details, please download the catalog or contact us.

By lightweighting the scaffolding, we reduce the burden on workers and improve production efficiency! We design the shape of the scaffolding to match the site and usage conditions. <Features> - Lightweight and Safe: With a specific gravity of less than 1, it is ultra-lightweight, making replacement and installation easy. - Corrosion Resistance: Excellent resistance to corrosion, water, and weather. - Custom Design: Proposing shapes tailored to usage conditions (shape, required strength, flame retardancy). <Applications> - Inspection scaffolding - Pathways for transporting in rough terrain - Emergency response and temporary scaffolding - Workspaces on water - Transport ramps *For more details, please download the catalog or feel free to contact us.

This is a friction material used for clutches and brakes in forging, sheet metal, high-speed presses, and overhead cranes. It offers long life, noise reduction, and excellent braking performance. It has been adopted by numerous overhead crane manufacturers and users. We provide friction materials tailored to specific models with a rich lineup of materials. Please feel free to consult us about any issues or troubles with brake friction materials for overhead cranes. 【Features】 - Long life, low wear - Noise suppression (※ noise reduction grade) - Stable friction coefficient, high braking performance - Low aggressiveness to counterpart If you are interested, please feel free to contact us or download the catalog.

Our "High-Tem" product offers superior heat resistance compared to nylon and has a proven track record as a sliding product in numerous applications. It is also used in guides under high-temperature conditions. Compared to metal guides, it is less prone to sticking, contributing to improved raw material clogging and reduced maintenance frequency. Please consider it as a replacement for plated and white metal guides. <Features> - Suitable for high-temperature environments: Continuous use at 260°C - High strength and high rigidity - Excellent sliding properties and wear resistance even under high-temperature conditions <Available sizes for High-Tem> - Sheet: 200mm (thickness) × 980mm (width) × 10000mm (length: up to 10m) - Tubular (pipe): Outer diameter φ1700mm (up to 1.7m) × 980mm (length) You can watch a comparison video of heat resistance by scanning the QR code in the catalog. If you are interested, please download the catalog or feel free to contact us.

Our "High-Tem" product has superior heat resistance compared to nylon and has been widely adopted as a sliding product. It is used in high-temperature applications such as chain guides and wear plates on conveyor lines in automatic drying ovens. It can also replace plating and white metal. <Features> - Can be used continuously at 260°C and is suitable for flame-retardant and thermal insulation applications. - As a thermosetting resin, once it is formed, it will not melt with heat. - Exhibits excellent sliding properties even at high temperatures. <Available Sizes for High-Tem> - Sheet: 200mm (thickness) × 980mm (width) × 10000mm (length: up to 10m) - Tubular (pipe-shaped): Outer diameter φ1700mm (up to 1.7m) × 980mm (length) You can view a comparison video of heat resistance by scanning the QR code in the catalog. If you are interested, please download the catalog or feel free to contact us.

This is a friction material for clutches and brakes that has a proven track record of being used in OEM applications through forging, sheet metal, and high-speed pressing. With a lineup of over eight types of materials, we can provide the optimal friction material for various models and concerns. With long lifespan and excellent braking performance, it has been adopted in many industrial equipment presses to date. Please feel free to consult us about any issues or troubles with friction materials. 【Features】 - Long lifespan, low wear - Noise suppression (※ noise control grade) - Stable friction coefficient, high braking performance - Low aggressiveness to counterparts (extends the lifespan of flywheels and drums) For more details, please feel free to contact us or download the catalog.

This is a composite bearing made of a special resin that does not corrode and is less prone to electrolysis. It has been adopted by seawater circulation pump manufacturers and shipbuilders for rudder bearing applications. <Features> 〇 Electrolysis Resistance Unlike metal bearings, it is less prone to electrolysis and prevents rust and corrosion of the opposing shaft. 〇 Long Lifespan It is resistant to wear and has stable sliding characteristics, reducing the frequency of bearing replacements. 〇 Soft Surface Hardness It has a soft surface hardness that does not cause wear or damage even with soft metal shafts. 〇 Lubrication It has self-lubricating properties and can be used without lubricating oil or grease. *There are materials that remain stable even under intermittent water conditions. 〇 Low Water Absorption and Swelling It has lower water absorption and swelling compared to general resins, making it less likely to cling to the shaft. 〇 Freedom of Shape Customizable to various sizes and shapes, including split and spherical shapes. We have received inquiries for applications in offshore wind power generation and movable breakwater uses. It can be used as a substitute for bronze and white metal. If you are facing issues with seawater environments, wear, rust, corrosion, or electrolysis, please feel free to contact us. <Design Consultation> Custom Design: Tailored to various sizes and shapes. Design Proposal: Suggestions for groove and hole designs based on application. *For more details, please download the PDF or contact us.

Our products are used in the work sites of steel, non-ferrous metal, paper, and industrial machinery manufacturers, as well as on staircases. The "anti-slip sheet" from BARIAS is more resistant to wear than commercially available tapes and sheets. By reducing the frequency of replacements, it contributes to waste reduction and lower procurement costs. 【Features】 ■ Wear-resistant: More durable and longer-lasting than commercially available tapes and sheets. (For detailed data, please refer to the catalog) ■ Resistant to chemicals: Usable in environments where acids, alkalis, and other chemicals are present. ■ Anti-slip effect in water and oil: Provides a non-slip effect in dry, wet, water, and oil environments, reducing the risk of tripping and slipping. (Refer to data in the catalog) ■ Easy installation: Compared to floor anti-slip coatings, simply applying the sheet (with adhesive) makes installation easy! ★ Patent pending ★ We can offer size and color suggestions to match your specifications. For more details, please download the catalog or contact us.

By coating various base materials with BARIAS, we provide functions such as waterproofing, rust prevention, impact resistance, weight reduction, heat resistance, aesthetic appeal, wear resistance, chemical resistance, adhesion suppression, weather resistance, and flame retardancy. It is used for floor repairs in warehouses and factories, liquid containment for chemical tanks, waterproofing of waterways in amusement facilities, anti-slip measures for pedestrian walkways, flame retardant cones, and suppression of ash adhesion on conveyor flights. For detailed characteristics, applications, and case studies, please refer to our comprehensive catalog. 【Features】 ■ Provides various functions Contributes to total cost reduction through extended lifespan and improved convenience and safety. ■ On-site construction available If the base material cannot be transported, equipment can be brought to the site for construction. ■ Pre-verification conducted Performance predictions using CAE analysis and effectiveness verification using our testing facilities are conducted in advance. ■ Aftercare We check usage conditions and implement improvement proposals. If necessary, we conduct analysis and evaluation using our testing facilities.

BARIAS Z-1 is a coating material that suppresses the adhesion of various powders and sludge. The adhesion suppression effect after coating lasts for a long time, allowing for a reduction in maintenance costs. It alleviates the burden of hazardous cleaning tasks. <Features> - Excellent cleanability and long lifespan: High water repellency - Prevents bridging: Suppresses adhesion of powders (such as coal, gypsum, incineration ash) and sludge - Thick film coating: Extending equipment lifespan by changing the film thickness applied - Applicable to irregularly shaped items <Adhesion Suppression Function by Powder Type> *Partial excerpt a. Adhesion target b. Evaluation c. Angle of slide 1. Coal (dry) △ 47° 2. Coal (wet) ○ 44° *Moisture content 10% 3. Lime (dry) △ 50° 4. Lime (wet) ○ 37° *Moisture content 10% 5. Iron (dry) ○ 38° 6. Iron powder (wet) ○ 42° *Moisture content 10% Note: Adhesion suppression judgment criteria based on the angle of slide ○ ... 25° or more and less than 45° △ ... 46° or more and less than 60° For more details, please download the catalog or feel free to contact us.

The BARIAS series provides surface protection and reinforcement for parts and components. It suppresses the adhesion of dirt, sticky substances, and powders containing moisture. This is a new maintenance cost-reducing coating that maintains its effectiveness for a long time. It contributes to enhancing productivity in manufacturing environments and creating a safe and secure workplace, from palm-sized parts to large-scale equipment integrated into factory facilities. <Features (Performance Specialization by Grade)> 1. Adhesion Suppression + Long Lifespan - BARIAS-Z1 Measures against bridging in buckets and tanks Measures to suppress the adhesion of powders such as coal, lime, and incineration ash 2. Protection Reinforcement + Long Lifespan - BARIAS-A1 Wear resistance, equipment protection, and shock mitigation for conveyor skirts and press liners handling hard, heavy materials *For more details, please download the catalog or feel free to contact us.

Just by applying the coating, it suppresses shelf hanging (bridging) and powder adhesion! <Features> - Suppresses shelf hanging (bridging) and powder (coal, lime, incineration ash) adhesion - Exhibits abrasion resistance, wear resistance, and corrosion resistance <Applications> - Hoppers (coal, lime, cement, gypsum board, raw material yard) - Conveying buckets (feed, chips, ores, etc.) - Bunkers (incineration ash, etc.) - Recovery containers (iron ore sludge, grinding and polishing sludge) - Flight conveyors - Silos (cement, feed) *Patent pending For more details, please download the catalog or contact us.

Even when water or oil is applied, the anti-slip effect remains unchanged, making it suitable for outdoor use. <Features> - Wear resistance: The anti-slip effect lasts long even in high foot traffic areas! - Chemical resistance: Highly resistant to acids, alkalis, oils, and more! - Weather resistance: Usable in harsh outdoor environments! <Applications> - Areas where oil is frequently used - Outdoor locations with a lot of dirt and mud - Safe passageways - High-traffic ramps/stairs - Places where injury prevention during falls is desired *Patent pending

It has high resistance to acids, alkalis, and oils, and provides a non-slip effect. <Features> - Wear resistance: The non-slip effect lasts for a long time even in high-traffic areas! - Chemical resistance: High resistance to acids, alkalis, and oils! - Weather resistance: Can be used as a non-slip sheet in harsh outdoor environments! <Applications> - Areas with heavy oil use - Outdoor areas with a lot of dirt and mud - Safe walkways - High-traffic ramps/stairs - Places where injury prevention during falls is desired - Aisles for automatic conveyors in factories *Patent pending *The size and color of the non-slip sheets can also be customized. Please feel free to contact us for more details.

<Features> - Lightweight and Safe: Extremely lightweight with a specific gravity of less than 1, making replacement and installation easy. - High Durability: Excellent corrosion resistance, water resistance, and weather resistance. - Flexible Design: Proposals for shapes tailored to conditions (shape, strength, fire resistance). <Applications> - Inspection scaffolding - Pathways for transportation on rough terrain - Emergency response and temporary scaffolding - Work areas on water - Transport ramps

We are adopting resin-based concrete formwork as a mold for decorative blocks. The number of companies using it as a mold for concrete weed mats is also increasing. <Features> 1. Enables safe work The weight of the formwork is reduced to one-third compared to metal due to its resin composition. 2. Concrete products can be easily demolded from the formwork Excellent release properties ensure that the products are clean. 3. Superior durability, achieving over 150 reuse cycles. We offer a lineup of multiple formwork material grades to suit various applications. For more details, please contact us or download the catalog.

Heat stroke prevention instructors recommend this heat-resistant helmet! ☆ Solve the summer helmet problems of "hot" and "stuffiness"! ☆ ■ Helmet without Styrofoam "PC-750R Type" - Contains heat-insulating material that reflects infrared rays and reduces heat - Internal temperature difference of the helmet: "-6℃" * - No Styrofoam means less heat retention and excellent breathability - No Styrofoam allows for easy washing and cleanliness - Adjustable headband for improved fit * Compared to our Styrofoam-equipped helmets. Measurement taken by humidifying the inside of the helmet.

"Me-mamo" allows for easy visualization of heatstroke risk simply by attaching a sensor to your helmet. When the risk of heatstroke increases, the notification lamp alerts not only the individual but also surrounding workers to the abnormal situation, enabling mutual monitoring among workers. 【Features】 ■ No forgetting to wear it, as it is attached to the helmet for measurement ■ Alerts surrounding colleagues of personal danger ■ Raises awareness of danger among colleagues ■ Can be used immediately as it does not require a smartphone, server, or personal information *For more details, you can view them immediately by downloading the PDF.

It is adopted by multiple manufacturers as an elevator braking device and holding brake material. It excels in braking performance, suppresses noise, and contributes to long service life. We offer the most suitable friction materials for each model with a rich lineup of materials. Please feel free to consult us about any issues or troubles with braking materials for elevators and other lifting devices. 【Features】 - High braking performance (high static friction coefficient and stable initial wear coefficient) - Long service life, low wear - Noise suppression (noise-resistant grade) - Low aggressiveness to counterpart materials *If you are interested, please feel free to contact us or download the catalog.

This is a friction material for industrial equipment, such as winder brakes for paper machines and tension brakes for feeding. It suppresses squeaking and has a long lifespan due to stable initial wear. We offer a wide range of materials to provide the most suitable friction materials for various models. Please feel free to consult us about any brake material troubles or concerns related to paper machines. 【Features】 - Long lifespan, low wear - Squeak suppression (squeak-resistant grade) - Stable friction coefficient, high braking performance - Low aggressiveness to counterpart *If you are interested, please feel free to contact us or download the catalog.

We offer a variety of bearing materials suitable for various conditions such as water lubrication, dry lubrication, and high-temperature conditions, and we can also manufacture super-large bearings with a diameter of over 1000 mm. In addition to ladder bearings, we propose bearing materials suitable for plant applications and general industrial use. <Features> - Long lifespan: Excellent wear resistance allows for reduced replacement frequency. - Chemical resistance: Possesses excellent acid and solvent resistance. It is hardly corroded even in ammonia gas. - Heat resistance: We also offer high-temperature materials that can be used at temperatures above 200°C. - Environmentally friendly: The oil-free design in water lubrication or dry lubrication does not pollute the ocean. - Class approval obtained (ladder bearings): NK, ABS, LR, DNV, CR, CCS, BV, KR.

It is purchased for heat countermeasures in various situations such as sports, commuting, and leisure. This is a portable cooling vacuum bottle for wet towels. It revives the coldness by inserting and removing wet towels or handkerchiefs. With a long-lasting cooling effect of up to 8 hours, it is a reliable ally to get through a hot day. Furthermore, it has been designed with a focus on ease of use. Eco-friendly heat stroke prevention. 【Features】 - Made of corrosion-resistant stainless steel (using SUS316) - Inner surface has a clean mirror finish that resists dirt - Neckless bottle for easy insertion and removal - Industry’s lightest design for easy portability - Reusable and eco-friendly For more details, please download the catalog or feel free to contact us.

ALP extruded products are composed of our original composite material, which combines fluororesin (PTFE) with fillers. These products integrate material technology and extrusion technology, offering unique features that cannot be found elsewhere. We can also produce products with special cross-sections. <Features> - Shape diversity: Capable of producing long products and special cross-sections that are difficult to handle with compression molding. - Long lifespan: Selection of original materials tailored to the usage environment, resulting in low friction coefficients and excellent wear resistance. - Chemical resistance: Strong against acids and alkalis. - Wide range of operating temperatures: Usable from -200°C to +200°C. - Material selection: Optimal materials are chosen based on usage conditions. We also design product shapes together. If you have the following issues, please contact us: "The sliding characteristics of the current material are poor," "Insufficient heat resistance," "Insufficient chemical resistance," etc. *ALP (Alp) is a registered trademark of Starlight Industries and refers to PTFE material reinforced with fillers. *For more details, please download the PDF or feel free to contact us.

The "seismic ring" enhances the strength of wooden structures and lightweight steel columns and beams by being installed on them. During an earthquake, the ring expands and contracts, flexibly absorbing the vibrations, which helps prevent the collapse of the building. It is easy to install and can reduce costs compared to traditional reinforcement work. For more details, please contact us or download the catalog.

ALP extruded products are composed of our original composite material, which combines fillers with fluororesin (PTFE), and feature various characteristics that are unique due to our extrusion technology. We can also manufacture products with special cross-sections. <Features> - Shape: Long products and special cross-section products are acceptable. - Low friction and wear resistance: We select original materials tailored to the usage environment, resulting in a low friction coefficient and excellent wear resistance. - Chemical resistance: Strong against acids and alkalis, suitable for use with most chemicals. - Operating temperature range: Wide range from -200°C to 200°C. If you are facing issues such as "poor sliding," "insufficient heat resistance," or "insufficient chemical resistance," please feel free to contact us. We will select ALP material (PTFE with fillers) suitable for your usage conditions and environment. *ALP is a trademark of Starlight, referring to PTFE material reinforced with fillers. *For more details, please download the PDF or feel free to contact us.

- In CAE, we achieve performance predictions to confirm the benefits of resinization through structural analysis (linear and nonlinear), resin flow analysis, vibration analysis, performance analysis in units, thermal analysis, and more. Particularly, the abundance of metal substitution achievements in ultra-high load applications is a characteristic of Starlight. - "Esbear" has a proven track record of resinization in drive systems in fields exceeding 200°C, especially in extremely harsh wear resistance requirements such as lubrication-free and contamination-prone environments. - As "plastic professionals," we not only propose resin materials tailored to applications but also ensure reliable and rapid development of component and unit designs that fully leverage the performance of these resins and Esbear through CAE. - As a record of concurrent engineering, we have development achievements for major electrical and machinery manufacturers and Tier 1 achievements with domestic automobile manufacturers. *For more details, please download the catalog or feel free to contact us.

It withstands high surface pressure and exhibits excellent sliding properties. It can significantly reduce initial costs without the use of molds. In addition to being used for railway vehicle sliding plates, it can be applied in a wide range of fields. 【Features】 1. High strength 2. Low wear and abrasion resistance 3. High surface pressure resistance 4. Low aggressiveness to counterparts 5. Heat resistance 6. Lightweight

The ALP Lip Seal is the "Almighty Seal" that can be used as an alternative to oil seals and mechanical seals. It is a high-performance seal with various features achieved through a uniquely blended filler material and design technology. <Features> ◆ Lubrication Conditions ... Usable not only with oil and water but also under dry conditions. ◆ Low Friction ... Reduces seal resistance, contributing to energy savings in machinery. ◆ Low Wear ... By using materials suitable for the operating conditions, a long lifespan of the seal can be expected. ◆ Low Aggressiveness ... The seal shape is designed to minimize damage to the opposing shaft, reducing shaft wear. ◆ Pressure Resistance ... Usable even in applications with high pressure. ◆ Heat Resistance ... Usable over a wide range from -50°C to 200°C. It is the optimal seal for areas where oil seals cannot be used and where mechanical seals offer excessive performance. The catalog explains the "ALP Lip Seal" using photos, illustrations, and tables. ↓↓↓ For more details, please download the catalog or contact us ↓↓↓

☆☆Updated "Customer Feedback" One Year After Actual Machine Testing in February 2025☆☆ BARIAS-A9 High Durability Piping extends the lifespan of piping by coating the inner surface of metal pipes with polyurea resin. This allows for an extension of the piping's lifespan in areas subject to severe thrust wear due to air transport, thereby increasing the replacement cycle. The BARIAS-A9 High Durability Piping enhances longevity by being applied to the inner surface of conventional metal piping, eliminating the need to change the existing piping system and making it applicable even in spaces where there is no room. Various tests have been conducted to prove its performance. Please refer to the attached catalog for details. Data from various wear tests conducted by our company can be found in the attached catalog. *For more details, please refer to the PDF materials. *If you have any questions, please feel free to contact us. *BARIAS is a registered trademark of Starlight Industrial Co., Ltd.

Starlight Industries has launched a dedicated website for the polyurea resin coating solution BARIAS. ▼ New site URL: https://barias-coating-solutions.com/ BARIAS is a polyurea resin coating solution that provides various properties such as impact resistance, rust prevention, chemical resistance, waterproofing, flame retardancy, and abrasion resistance to various materials and structures, enabling it to withstand harsh usage environments. It can flexibly adapt to any substrate and contributes to solving many challenges such as weight reduction, extended lifespan, labor saving, and improved safety. Additionally, BARIAS will be exhibited at the following trade show held on Wednesday, July 23. This will be a valuable opportunity to see the actual product, so please stop by the venue.