タニムラ List of Products and Services

This is a biodegradable fog and rust remover that is gentle on both the human body and the environment, using plant-based fruit acids. It exhibits powerful rust and fog removal effects without using any harsh chemicals. It is suitable for metals other than iron, such as brass, iron, copper, solder, and alloys (not suitable for carbon steel). Of course, it has no adverse effects on painted surfaces, plastics, ceramics, or rubber. This product provides a short-term rust prevention effect lasting a few days, preventing flash rust from water droplets immediately after cleaning. Due to its high viscosity, it adheres well to vertical and horizontal surfaces and can be applied with a brush. It is a non-flammable product with a sweet fruit acid scent, making it safe to use.

• Rust Inhibitor

Fabric for clean rooms sewn with conductive carbon threads No general fabric products that generate dust or particles are allowed in the clean room. When using fabric products in the clean room, this "antistatic fabric for clean rooms" is used. This product is particularly suited for applications that require heat resistance, flame retardance, chemical resistance, and high strength. The product is equipped with "conductive threads" that provide excellent antistatic effects, woven throughout the fabric at 7mm intervals. The "conductive stripe pattern" clearly distinguishes it from general products, allowing for advanced quality control. It can be safely used in clean rooms and areas where static electricity measures are necessary.

• Other clean room equipment and facilities
• Anti-static products
• curtain

Zipper-type air pack bag This product incorporates air packs (bubble wrap) inside a polyethylene bag with a zipper. The outer zipper bag is made of thick film (80μ), providing strength and durability. The air caps inside are heat-sealed at the opening, allowing for smooth insertion and removal of items. Moreover, the air caps (bubble wrap) do not come into direct contact with the products, preventing marks from the air bubbles. Therefore, it is used for the storage and transportation of expensive jewels, precious metals, and electronic components that are sensitive to impact. It is a product that allows for easy verification of contents and enables neat organization and management.

• Packaging materials
• Packaging Bags
• Cushioning material

Polyethylene bags ideal for packaging in 3×6 shaku size This product is an extra-large poly bag that accommodates packaging of 3 shaku × 6 shaku (910×1820mm). With a thickness of 50μ, it is durable and does not generate static electricity, preventing surrounding dust from accumulating. It can also be used as a cover bag for polystyrene boards (spacers) used in transport trucks.

• Packaging materials
• Anti-static products

Heat-resistant, cold-resistant, wear-resistant, and chemical-resistant Teflon bags. This product uses PTFE (Teflon) sheets that can be used in high and low temperature environments ranging from -150 to +260°C. It excels in preventing adhesion of glue, ink, adhesives, and burns, as well as in chemical resistance. Additionally, it is made from non-toxic materials, allowing it to be used in processes where food comes into direct contact. The adhesive tape base material is made of "glass cloth," which has very high strength and excellent heat resistance. The surface is coated with PTFE/Teflon. It has excellent sliding properties, low friction, and outstanding wear resistance. It offers long-term heat and cold resistance in environments ranging from -150 to +260°C. If static electricity measures and anti-static functions are required, please use the anti-static heat-resistant Teflon bags.

• Packaging Bags
• Packaging materials
• Chemicals

Teflon bags with excellent anti-static, heat resistance, wear resistance, and chemical resistance. This product uses PTFE (Teflon) sheets that can be used in high and low temperature environments ranging from -150 to +260°C. It is excellent at preventing adhesion of glue, ink, adhesives, and burns, as well as having superior chemical resistance. Additionally, it uses conductive carbon, which prevents static electricity, making it suitable for processes that dislike static. - The surface resistance value is extremely high at 10 to the power of 8 ohms, effectively preventing static charge. - The base material of the adhesive tape is "glass cloth," which has very high strength and excellent heat resistance. - The surface is coated with PTFE/Teflon. - It has good sliding properties, with low friction and excellent wear resistance. - It has long-lasting heat and cold resistance in environments ranging from -150 to +260°C.

• Anti-static products
• Packaging Bags
• Packaging materials

Semi-permanent conductive black poly bags and sheets Typical anti-static bags prevent static electricity by having surfactants bleed out onto the film surface. In other words, once the surfactant is used up, the anti-static effect is lost. On the other hand, this product incorporates conductive carbon to adjust the electrical resistance value, ensuring that it does not accumulate static electricity semi-permanently. Moreover, with a surface resistance value of 2.2×10 to the power of 4 [Ω], it has high conductivity and effectively prevents static electricity accumulation. It allows for the safe packaging of electronic components that are sensitive to static electricity for an extended period.

• Anti-static products
• Packaging Bags
• Packaging materials

ESD Static Electricity Destruction Prevention Shield Bag MK-CAB This bag prevents destruction caused by electrostatic discharge (ESD) from the outside. It adopts a two-layer structure of PET film with a deposited antistatic agent and antistatic PE. Both the inner and outer surfaces of the bag exhibit antistatic properties. Additionally, it is transparent, allowing for easy confirmation of the contents.

• Anti-static products
• Packaging Bags
• Packaging materials

Removal of static electricity and cleaning of oil and dust This wiping cloth can perform powerful static electricity removal and cleaning simultaneously. ● Simply touching (or bringing close) this product to materials that are charged with static electricity will quickly discharge them. ● Made with microfiber, it effectively removes dust and oil stains without leaving any residue. ● The fabric is very soft and does not contain carbon or metals, so it won't scratch the surfaces being wiped. ● It can be used on any side of the cloth, making it suitable for a wide range of applications from narrow spaces to larger areas.

• Anti-static products
• Wes
• Ionizers and static eliminators

Heat-resistant aluminum foil tape with adhesive that conducts electricity Standard aluminum foil tape has a conductive surface (metal part) but the adhesive side does not conduct. On the other hand, this fully conductive aluminum foil adhesive tape can achieve a conductive effect by integrating with the substrate. In other words, electricity flows between the tape surface and the back side (adhesive side), ensuring conductivity. It is also heat-resistant, so even after being adhered for 14 hours at approximately 100°C, there is no adhesive residue when the tape is removed. Aluminum foil adhesive tape is highly flexible, making it suitable for wrapping tasks and punching processes. It can also be used for "temporary bonding applications" where clean removal after application is necessary.

• Anti-static products
• Packaging materials

Heat-resistant aluminum foil tape with adhesive that conducts electricity. Typical aluminum foil tape has a conductive surface (metal part) but the adhesive side does not conduct. On the other hand, this fully conductive aluminum foil adhesive tape can achieve a conductive effect by integrating with the substrate. In other words, electricity flows between the tape surface and the back side (adhesive side), ensuring conductive performance. Since it is also heat-resistant, there is no adhesive residue after peeling off the tape even after adhering for 14 hours at approximately 100°C. Aluminum foil adhesive tape is highly flexible, making it suitable for wrapping tasks and punching processes. It can also be used for "temporary bonding applications" where clean removal after application is necessary.

• Adhesive tape
• aluminum
• Other metal materials

You can operate touch panels accurately with high-sensitivity gloves. The number of touch panel-operated devices used in factories is increasing. There are two types of touch panels: "pressure-sensitive" and "capacitive." However, when wearing gloves or work gloves, the "capacitive" type does not respond. This product uses high-sensitivity conductive thread made in Japan in the fingertips, allowing it to be used with both types. Compared to regular smartphone gloves, it has higher sensitivity and enables precise operation, making it a professional-grade work glove. It feels the same as traditional work gloves, allowing touch panel operation without compromising the original usability. Of course, it can also be used to operate smartphones and tablets commonly sold in the market. *Since it is made in Japan and well-stitched, it can be washed in a washing machine and reused multiple times.

• Touch Panel
• Work gloves

Cordless Static Electricity Removal Wristband TW-CWB (No Ground Wire Required) When a person moves, static electricity is generated, causing an accumulation of charge (charging) in the human body. The current when static electricity is discharged from the body is minimal, but the voltage is high, allowing it to discharge through the air. This discharge can pose a significant problem in environments with sensitive electronic devices that are vulnerable to static electricity or where there is a risk of explosion. In other words, it is necessary to constantly lower the voltage of the human body. This product, the "Cordless Static Electricity Removal Wristband," assists in this process. The wristband worn on the wrist generates corona discharge*, aiming to keep the body's charging voltage low. It is used as an aid in the assembly of electronic components that are sensitive to static electricity and in locations where there is a risk of ignition or fire.

• Ionizers and static eliminators

Conductive Kraft Paper (Black Conductive Paper) This is a type of "paper" that can be used for static electricity prevention and radio wave interference prevention. ● The conductive carbon blended into the kraft paper exhibits excellent electrical properties. ● The surface resistance value ranges from 10^4 to 10^6 [Ω], and the volume resistivity ranges from 10^5 to 10^8 [Ω], demonstrating very good electrical characteristics. ● It minimizes changes in electrical resistance due to temperature and humidity, making it suitable for use in various environments. ● It has heat resistance characteristic of pulp fibers, allowing it to be used in short-term heat treatment processes. ● It can be disposed of as general "paper." ● We will ship it after processing into the specified shape and size.

• Anti-static products
• Paper and pulp products
• Magnetic field analysis/electromagnetic wave analysis

It is possible to check for accumulated particles and scratches in a clean room. Typically, the measurement of airborne dust in a clean room is done using a particle counter. However, accumulated dust particles with a diameter of about 10 to 100 μm cannot be detected by measuring instruments or visually. Particles that cannot be confirmed by such measuring instruments or visually can be observed with the naked eye using the light source of this product. This product utilizes automotive headlight technology, allowing for uniform and extremely even illumination over long distances. Additionally, the high-quality, uniform light clearly illuminates nearby small particles without missing them. Therefore, by illuminating from the side with this product, it is possible to observe fine dust and scratches adhered to surfaces. Of course, it can also be used in places where a powerful light source is needed, such as nighttime security operations, on-site inspections, and forensic investigations.

• Other clean room equipment and facilities
• Visual Inspection Equipment
• Floodlight

Antistatic casters suitable for clean rooms Standard casters do not have static electricity measures, which attracts surrounding dust and dirt during transportation. In particular, when transporting electronic components and precision equipment that require static electricity measures, antistatic features are necessary. In such environments, this "clean room antistatic caster" is used. The wheel material of this product has antistatic properties, ensuring stable effectiveness even with wear. Additionally, a smooth-moving dual-layer bearing is used in the swivel part of the caster. Furthermore, to ensure thorough static electricity measures, conductive grease is used for lubrication in the swivel area. This is a clean caster that can be safely used in all situations.

• Other clean room equipment and facilities
• Anti-static products
• caster

Logistics in Clean Rooms and Static Electricity Prevention Work Generally available work carts do not have measures to prevent static electricity buildup. Therefore, they are not used for transporting electronic components and precision equipment, where static electricity damage is a concern. Additionally, the static electricity from the carts attracts surrounding dust and dirt, making them unsuitable for clean rooms. In these environments, this "conductive work cart" is used. This conductive work cart features conductive PP for the main body and conductive rubber for the wheels that make contact with the ground. By combining a conductive resin platform with conductive rubber casters, it effectively releases static electricity to the ground and is highly effective in preventing dust attraction. The surface resistance value is an excellent figure of less than 10 to the power of 5 [Ω] (when DC 500V is applied).

• Other clean room equipment and facilities
• Anti-static products
• Trolley

Clean Room Dedicated Chair This product is a chair designed specifically for clean rooms, pursuing cleanliness. It aims for high levels of dust-proof performance and comfort, and assembly is also done within the clean room. The backrest, which can be adjusted up and down, has a shape that narrows at the top to avoid interfering with work in the clean room. Additionally, the use of conductive resin for the back cover and conductive casters provides excellent electrical properties. Furthermore, it is supported by five legs, enhancing safety compared to chairs with four or fewer legs. This product is also packaged in a clean pack within the clean room to prevent dust contamination.

• Other clean room equipment and facilities
• Anti-static products
• Office furniture

Cushions and mats in clean rooms General materials that generate dust and dirt are not allowed in clean rooms. When using cushions or pads (shock-absorbing materials) in a clean room, "clean cushions" are used. These cushions are made from the same fabric used for clean room workwear. Therefore, they have dust-proof and static electricity prevention properties, just like clean wear. The surface of the fabric features a "striped pattern" with conductive threads sewn in, clearly distinguishing them from regular products. They are also used as cushioning materials and protective covers in clean rooms.

• Other clean room equipment and facilities
• Anti-static products
• mat

Finger cots that prevent trouble causes In clean rooms, always use clean-specific products instead of general products that generate dust and particles. Furthermore, in environments where static electricity prevention is necessary, this "Super Clean Anti-Static Finger Cot" is used. This product employs high-performance nitrile rubber that offers excellent anti-static effects and strong grip. Additionally, it does not use any silicone, chlorine, sulfur, powders, or pigments, preventing issues related to NVR and component adhesion. It can be safely used in clean rooms and areas where static electricity measures are needed, contributing to improved yield.

• Work gloves
• Other clean room equipment and facilities
• Anti-static products

Thoroughly prevents static electricity with finger cots. In clean rooms, always use products specifically designed for clean environments, not general products that generate dust and particles. In locations where more stringent static electricity management is required, this "clean conductive finger cot" is used. This product has a very strong anti-static effect and prevents even weak static electricity buildup. It has the unique softness of natural rubber, providing excellent fit, and the high-grip surface treatment enhances usability. It can be used in places where thorough static electricity measures are desired, contributing to improved yield.

• Work gloves
• Other clean room equipment and facilities
• Anti-static products

Fabric for clean rooms sewn with conductive carbon threads No general fabric products that generate dust or particles are allowed in the clean room. When using fabric products in the clean room, this "antistatic fabric for clean rooms" is used. This product is equipped with "conductive threads" that provide excellent antistatic effects, woven throughout the fabric at 5mm intervals. The "conductive stripe pattern" clearly distinguishes it from general products, enabling advanced quality control. It can be used safely in clean rooms and in areas where static electricity measures are necessary.

• Other clean room equipment and facilities
• Anti-static products
• fiber

500℃ heat-resistant and cut-resistant safety gloves for clean rooms This product uses aramid long fibers, making it suitable for use in high-level clean rooms. The yellow fabric of the gloves has a heat resistance of 500℃ and excellent cut resistance, ensuring it won't be cut even when a blade is drawn across it. Additionally, the entire product is woven with "conductive threads" at a narrow spacing of 3mm, providing excellent conductivity. This offers stable static electricity prevention effects, allowing for use in environments where advanced static electricity measures are required. Furthermore, the "conductive stripe pattern" clearly distinguishes it from general products, enabling advanced quality control. It provides strong protection for workers' hands in clean rooms and environments where static electricity measures are necessary.

• Work gloves
• Other clean room equipment and facilities
• Anti-static products

Fabric gloves sewn with conductive carbon threads. No general products that generate dust are allowed in the clean room. When using fabric gloves in the clean room, these "clean conductive gloves/fabric gloves" are used. The fabric of this product is interwoven with "conductive threads" that have excellent conductivity at 10mm intervals. This "conductive stripe pattern" clearly distinguishes it from general products, preventing any mix-up. Additionally, it has an anti-static effect, making it suitable for use in the assembly process of electronic components. It can be safely used in clean rooms and in EPA areas where static electricity measures are necessary.

• Work gloves
• Other clean room equipment and facilities
• Anti-static products

Soft and flexible, fitting comfortably on the hand. Generally, nitrile gloves are stiffer and lack a good fit compared to latex rubber gloves, and they also do not provide much grip. This was a significant issue that arose when comparing latex gloves and nitrile gloves. The difference becomes particularly noticeable when working with inner gloves. This product has excellent "elasticity" and "grip performance" compared to regular nitrile gloves. It fits securely on the hand and has strong grip, allowing for precise work even when used with inner gloves.

• Work gloves
• Other clean room equipment and facilities

Allergy prevention mask for use in clean rooms. Regular disposable masks are not used in clean rooms because they generate dust from the filter and rubber parts. When used in clean rooms, this "Super Clean Mask" is employed. The mask part of this product features a high-performance filter with a three-layer structure, achieving approximately 97% collection efficiency. To prevent natural rubber allergies, the ear and head straps are made of "polyurethane." Additionally, materials that do not contain chemicals are used in the manufacturing process to minimize the occurrence of skin allergies. Packaging is done in a clean room, and it is a clean pack product compliant with Clean Class 100. It can be safely used in clean rooms and is a reassuring product that is gentle on people.

• Work gloves
• mask

Chemical resistance, water resistance, and excellent static electricity prevention clean wear. In clean rooms, dedicated dust-free clothing is worn to prevent dust generation from workers. This product is particularly used in environments where chemicals or liquids are handled and where advanced static electricity measures are necessary. Unlike general clean wear, this product is used in more stringent, high-level environments. 【Features of Clean PTFE Teflon Wear HM-PCW】 ● Strong chemical resistance ... Extremely durable against acids and alkalis. ● Strong water repellency ... Effectively repels moisture, preventing penetration into the wear. ● Strong static electricity prevention ... Conductive threads are intricately woven in both directions. ● Excellent dirt resistance ... The surface slip properties of the wear are outstanding, preventing the adhesion of contaminants. ● Washable up to 100 times ... Clean quality is maintained even after 100 washes.

• Other clean room equipment and facilities
• Work gloves
• mask

Humans are the largest source of dust generation. Dust from workers, including the human body and all worn items, is the biggest source of contamination in clean rooms. Additionally, there are reports indicating that a significant portion of foreign substances analyzed consists of contaminants from workers. The proportion of dust generation attributed to workers is extremely high, and cleanroom garments play a crucial role in controlling dust within clean rooms.

• Other clean room equipment and facilities
• Work gloves
• mask

Cleaning roller for dust adsorption used in cleaning equipment Cleaning equipment may be used for cleaning electronic substrates and dry resist films. The rubber roller inside the device adsorbs dust from the substrate, but it is also necessary to remove the dust that has adhered to the roller. This product, the "adhesive sheet roller for dust transfer," serves that purpose. This product continuously cleans the surface of the rubber roller while in constant rotational contact with it. If the adhesive strength of the adhesive sheet decreases due to dust, the film can be peeled off to use a new adhesive surface. Since it uses white PET film, it is easy to check for adhered dust and dirt. It features a resin core, allowing for safe use in cleanroom environments.

• Other clean room equipment and facilities
• Adhesive tape
• Other cleaning tools

ESD anti-static floor adhesive mat When performing electronic component work in clean rooms, it eliminates all causes that can lead to electrostatic destruction. Of course, care is also taken for "shoe sole cleaning" just before entering the clean room. This product is an adhesive sheet for shoe sole cleaning that uses a water-based adhesive with excellent anti-static properties. No matter how many times you step on the adhesive mat, it prevents the generation of static electricity on the adhesive surface. Additionally, it does not generate static electricity when the film is peeled off, so it does not affect people or carts passing over the sheet. Furthermore, since it uses a water-based adhesive, it does not produce the characteristic organic odor associated with adhesives. Additionally, the film peeling tab has "numbers" printed on it, indicating the remaining number of sheets. This not only makes the remaining quantity clear but also helps manage the number of sheets peeled off in a day.

• Other clean room equipment and facilities
• Other cleaning tools
• Adhesive tape

No general products that can generate dust are allowed in the clean room. When using a mop in the clean room, the product "Clean Micro Mop" is used. - The mop features microfiber with sponge, which removes microscopic dirt and oil films. - The handle and body are made of anti-static aluminum, allowing for storage without attracting dust. - The handle is divided into five sections, making it usable in various locations from a handy 390mm to a long 1330mm. - The mop can be used on both sides and can be washed and reused approximately 30 times. - It is resistant to organic solvents, making it ideal for wet cleaning and solvent wiping. *This product is all clean-packed, ensuring safe use in clean rooms.

• Other clean room equipment and facilities
• Other cleaning tools
• mop

High-Purity Water Washed High-Level Cleanroom Wiper [MK-CSW] In cleanrooms, it is essential to use dedicated cleanroom products instead of general rags that generate dust and particles. This clean micro wiper is specifically used in environments that require high-level management. The product is cleaned internally with ultra-pure water and then sealed in packaging within the cleanroom. The fabric is cut using laser thermal cutting instead of blades, preventing particle generation from the cut edges. It can be safely used in high-level cleanrooms (compatible with clean class 100).

• Other clean room equipment and facilities
• Other cleaning tools
• Wes

Thick high-level cleanroom wipers woven from ultra-fine microfiber [MK-CMW] In cleanrooms, it is essential to use products specifically designed for cleanrooms, rather than general rags that generate dust and particles. This clean microfiber wiper is particularly used in environments where strong absorbency and wiping performance are required. The product employs "microfiber," which has excellent absorbency and wiping capabilities. It is finished with a thick fabric on a weaving machine, giving it a texture similar to "moist, thick silk fabric." To remove internal dust from the fabric, it is washed with ultra-pure water and vacuum-packed. The fabric is cut using laser thermal cutting instead of blades, preventing dust generation from the cut edges. It can be safely used in high-level cleanrooms. (Compatible with clean class 100)

• Other clean room equipment and facilities
• Other cleaning tools
• Wes

Cleanroom wiper sewn with conductive carbon thread In cleanrooms, it is essential to use products specifically designed for cleanroom use, rather than general products that generate dust and particles. Furthermore, in environments where static electricity prevention is necessary, this clean anti-static cloth/wiper is used. This product features excellent conductivity with "conductive threads" woven throughout at 17mm intervals. The "conductive stripe pattern" serves as proof that the product is made of conductive material, clearly distinguishing it from general products and enabling thorough quality control. Additionally, it is reinforced with a triple fold on all sides, preventing fraying even after repeated washing and use. It can be safely used in cleanrooms and areas where static electricity measures are required.

• Other clean room equipment and facilities
• Anti-static products
• Other cleaning tools

Removal of extremely fine micro dust Regular cotton swabs have paper shafts and cotton heads, so they are not used in clean rooms. This product features a plastic shaft and a special dust-free microfiber at the head (tip). The shaft can be bent freely, and the special microfiber at the tip captures even the finest dust particles. It can clean fine dust that cannot be removed by regular clean room cotton swabs or swabs.

• Other clean room equipment and facilities
• Hand cleaner
• Other cleaning tools

Cotton swabs that can be used in clean rooms Regular cotton swabs have a paper stick and a head made of cotton, so they are not used in clean rooms. In environments where it is important to prevent the generation of paper dust and lint, this product, "Dust-Free Cotton Swabs for Clean Rooms," is used. The stick (handle) of the clean cotton swab is made of plastic resin, which eliminates the generation of paper dust. The head (tip) does not use cotton but employs polyurethane foam, which reduces dust and lint. No adhesives are used to bond the stick and the tip foam; instead, they are fixed by thermal welding. The stick is made of PP, making both the head and stick resistant to solvents, ensuring there is no concern about leachables. ■ Please use clean micro cotton swabs for use in fine details.

• Other clean room equipment and facilities
• Hand cleaner
• Other cleaning tools

ESD pen-type cotton swab cleaner for use in clean rooms. Regular cotton swabs are made of a paper shaft and cotton head, so they are not used in clean rooms. This ESD pen-type sponge cleaner is particularly suitable for tasks that involve soaking the pen tip with chemicals. The shaft (handle) of the pen-type cleaner is made of anti-static PP resin, and the pen tip is made of porous PE foam. The tip cleaner part strongly adsorbs dirt at the 10-15μm level due to its porous structure. Additionally, it has moderate cushioning and, due to its porosity, has excellent absorbency, making it suitable for wiping with solvents. This pen-type cleaner can be used in all processes within a clean room. For the removal of very fine dust, please use clean micro cotton swabs.

• Other clean room equipment and facilities
• Anti-static products
• Hand cleaner

For the removal of dirt adhered to the adhesive rubber roller, a silicone-free adhesive rubber roller is used for cleaning electronic substrates and dry resist films. While the adhesive rubber roller can be reused, it is necessary to remove the dirt that adheres to its surface. For the transfer removal of adhered dirt, a "silicone-free adhesive sheet for dirt transfer" that does not use silicone is employed. Simply rolling the rubber roller over this product will clean the surface of the rubber roller. If the adhesive strength of the adhesive sheet decreases due to adhered dirt, one layer of the film can be peeled off to use a new surface. This product uses a white film, making it easy to check for adhered dirt and stains. The base bottom plate is also made of resin, allowing for safe silicone-free operations in clean rooms.

• Other clean room equipment and facilities
• Hand cleaner
• Other cleaning tools

Removing dust from surfaces such as substrates and films There are two types of adhesive cleaners (roller type) that can be used in clean rooms: adhesive tape roller type and rubber roller type. When the adhesive surface becomes dirty during use, the adhesive tape type peels off the tape, while the rubber roller type rolls the roller on a dedicated adhesive transfer sheet to transfer the adhered dust to the sheet. This product uses a roller that has less transfer of siloxane (silicic acid) than general silicone rubber. Moreover, due to the unique softness of the rubber roller, it removes dust and particles without damaging the target object. *If static prevention or complete silicone-free is required, please use the MK-EC rubber roller.

• Other clean room equipment and facilities
• Hand cleaner
• Other cleaning tools

Cushioning Dust Removal Roller for Clean Rooms [TW-CCR] Regular dust removal rollers that roll around generate dust and should not be used in clean rooms. When using in clean rooms, specialized clean room products must be used. This product features a thick film with an embossed texture, providing cushioning. In other words, unlike conventional products, the contact area of the roller during cleaning is larger, significantly improving cleaning efficiency. Additionally, a plastic core is used in the center to prevent dust generation. You can safely perform cleaning tasks in clean rooms. *If static prevention is required, please use the anti-static roller (TW-ACR).

• Other clean room equipment and facilities
• Hand cleaner
• Other cleaning tools

Clean Room Anti-Static Dust Removal Roller [TW-ACR] Regular lint rollers are not used in clean rooms because they generate dust. Additionally, in the workflow of circuit boards and electronic components, it is necessary to address the static electricity of the roller itself. In such environments, this product, the "Clean Room Anti-Static Cleaning Roller," is used. This dust removal roller suppresses dust by utilizing a "resin film" and a "resin core." It employs an anti-static adhesive to prevent static charge during operation and when peeling off the film. It can be safely used in clean rooms where ESD measures are required.

• Other clean room equipment and facilities
• Anti-static products
• Hand cleaner

Clean seamless paper tubes have no surface irregularities. The materials that can be used in clean rooms, where even minute dust can cause problems, are limited. Of course, regular paper tubes, being made of paper, can cause particle contamination in clean rooms. Therefore, when using paper tubes in clean rooms, "clean room paper tubes" are used. This product features a resin coating on the surface and both ends, and uses dust-proof paper on the inner surface to prevent dust generation from the surface. Additionally, this paper tube has no surface irregularities, so wrapping film sheets around it does not damage the product. Furthermore, the ends are processed with an R shape on the inner side, allowing for smooth attachment to chucks. Because it generates little dust during rubbing or tape reapplication, it is used in various fields.

• Other packaging materials
• Other clean room equipment and facilities
• Clean Booth

Electrostatic discharge-resistant packaging PP band Regular PP bands generate static electricity, attracting surrounding dust, and are not used in clean rooms. This anti-static (static electricity prevention) PP band is used instead. Additionally, ESD static electricity measures are essential during the packaging of circuit boards and electronic components. In this case as well, the anti-static PP band is used. Anti-static agents are blended into the polypropylene resin, resulting in a surface resistance value approximately one millionth that of regular PP bands. Furthermore, this anti-static PP band also excels in heat resistance. Even after undergoing heat treatment at 150°C for 72 hours post-packaging, no abnormalities such as band sagging have been observed. The PP band, with its excellent properties, offers stable performance, allowing for safe use.

• Other packaging materials
• Binding/Packing Machine

Electrostatic Discharge Prevention Vinyl Sheet for Clean Rooms In clean rooms, general products that attract dust and particles due to static electricity are not allowed. When in use, this product, "Clean Electrostatic Prevention Vinyl Sheet," will be utilized. This product employs "Electrostatic Prevention PVC Film," which has excellent static electricity prevention properties. Being a clear transparent sheet, it allows for easy visibility of the contents even when covering objects. It features a resin winding core (plastic core), making it safe for use in clean rooms. ■ Standard size ... 1370mm width × 30m roll

• Clean Booth
• Other clean room equipment and facilities
• Anti-static products

Electrostatic Discharge Prevention Vinyl Sheet for Clean Rooms In clean rooms, general products that attract dust and particles due to static electricity are not allowed. When in use, this product, "Clean Electrostatic Prevention Vinyl Sheet," will be used. This product employs "Electrostatic Prevention PVC Film," which has excellent electrostatic prevention properties. It is a clear transparent sheet, making it easy to check the contents even when covering objects. It uses a resin winding core (plastic core), allowing for safe use in clean rooms. ■ Standard Size ... 1370mm width × 30m roll

• Clean Booth
• Other clean room equipment and facilities
• Clean bench