田辺プラスチックス機械 Product Lineup

Our "Repelletter" is a pelletizing device designed for molding factories that cuts plastic resin extruded from an extruder on the surface of a mold. Due to its hot-cutting method, it produces clean pellets with minimal powder and uniform size. With a total length of about 1300mm, it is compact and space-saving. <For those who are facing these issues> Struggling with the disposal of waste plastic generated in the factory. Want to reduce disposal costs. ↓ ◆ Waste plastic generated from the manufacturing process can be re-pelletized within the factory and mixed with virgin material for use. ◆ By re-pelletizing within the factory, there is no concern about contamination with impurities. *If you send us your raw materials, we will create sample products! For more details, please contact us or download the PDF to learn more.

• Extrusion Machine
• Other processing machines
• plastic

The "Repelletter" is a small hot-cut pelletizer. Due to its hot-cut design, it can produce clean pellets with uniform particles and minimal powder. <For those who are facing these issues> ◆ Want to internalize the recycling of expensive resin materials ◆ Currently relying on recycling companies but end up with impurities ◆ Lack of space to accommodate large machines *If you send us the materials you are using, we can create a sample! For more details, please contact us or download the PDF to learn more.

• Extrusion Machine
• Other processing machines
• plastic

The "Re-Pelletter" is a small hot-cut pelletizer. Due to its hot-cut method, it produces clean pellets with uniform particles and minimal powder. It is also available in a tabletop model, making it more compact. The cutter unit can be attached to existing extrusion machines (details to be discussed). ~ We are currently accepting trial production requests ~ If you send us the raw materials being used, we will send you samples produced with the Re-Pelletter! *Please feel free to contact us for more details. <For those who are facing these issues> - Want to internalize the recycling of expensive resin materials - Currently relying on recycling companies but end up with impurities - Do not have enough space for large machines *For more details, please refer to the PDF document or feel free to contact us.

• Extrusion Machine
• Other processing machines
• plastic

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to gears made from special steel materials that undergo strict inspections and thrust bearings selected with ample margins. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as heating methods using oil or steam, can also be designed and manufactured. 【Features】 ■ Cylinder made of high wear-resistant nitrided steel → Can be changed to high corrosion-resistant (H-alloy or Hastelloy-type) special steel materials ■ Equipped with high-performance, wear-resistant, and corrosion-resistant screws ■ Electric resistance heating method → Can be changed to induction heating method or other heating methods ■ Control panels integrated for stable operation *For more details, please download the PDF or contact us.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to gears made from special steel materials that undergo rigorous inspection and thrust bearings selected with ample margin. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as heating methods using oil or steam, can also be designed and manufactured. 【Features】 ■ Cylinder made of high wear-resistant nitrided steel → Can be changed to special steel materials with high corrosion resistance (H alloy or Hastelloy type) ■ Equipped with screws that are high-performance, wear-resistant, and corrosion-resistant ■ Electric resistance heating method → Can be changed to induction heating method or other heating methods ■ Control panels integrated for stable operation *For more details, please download the PDF or contact us.

• Extrusion Machine

Our laminating device, the "90mm Extruder for Laminating," comes in various types including general-purpose, tandem, cross, carpet, and metal sheet models. The target substrates include kraft paper, cellophane, aluminum foil, plastic film, fabric, and carpet backing. 【Features】 ○ Extruder: Long overhang type, with movable cart (manual/electric) ○ T-die: Typically a straight manifold with a sharp edge width adjustment mechanism, designed and manufactured based on calculated shapes and dimensions according to usage conditions. ○ Laminating line: Components such as feed units, anchor coaters, corona treatment, laminating roll units, slitters, and rewinders are selected based on the intended purpose. *For more details about the product, please download the PDF materials or contact us.

• Extrusion Machine

Our laminating device, the "90mm Extruder for Laminating," offers a variety of models including general-purpose, tandem, cross-use, carpet, and metal sheet types. The target substrates include kraft paper, cellophane, aluminum foil, plastic film, fabric, and carpet backing. 【Features】 ○ Extruder: Long overhang type, with movable cart (manual/electric) ○ T-die: Typically features a straight manifold with a sharp edge width adjustment mechanism, designed and manufactured based on calculated shapes and dimensions according to usage conditions. ○ Laminating line: Selection of equipment such as feed unit, anchor coater, corona treatment, laminating roll unit, slitter, and rewinder based on intended use. *For more product details, please download the PDF materials or contact us.

• Extrusion Machine

Large-diameter and small-diameter pipes, small-diameter tubes, and their multilayer extrusion, as well as coated products such as steel pipes, can be formed. 【Features】 〇 The dies include straight type, offset type, cross-head type, and internal structures such as spider type and spiral type, from which the appropriate one is selected based on the type of resin and its application. 〇 Sizing primarily uses the outside method, but the inside method may also be used in conjunction. Additionally, vacuum sizing or vacuum tanks can be employed as needed. 〇 The take-off machine can be of various types, including two to three pairs of rolls, caterpillar type, and belt type, with the appropriate one selected according to the product shape and speed. Furthermore, a remote-controlled operation stand can be installed near the sizing die entrance. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

We select and design/manufacture according to the application, considering the diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber), ear treatment methods, winding methods, etc. 【Features】 ○ Power transmission part (reducer): Gears are made using special steel materials, crafted through meticulous processing and strict inspection, and thrust bearings are selected with ample margin, allowing for endurance in harsh and long-term continuous operation. ○ T-die: Based on straight manifold type and coat hanger type, with options for choke bars, lip types (general or bending lip), and lip adjustment methods. ○ Forming device: Diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber, static eliminator), ear treatment methods, winding methods, etc. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

We select, design, and manufacture according to the application, considering the diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber), ear processing methods, winding methods, and more. 【Features】 ○ Power transmission part (reducer): Gears are made using special steel materials, crafted through meticulous processing and strict inspection, and thrust bearings are selected with ample margin, allowing for durability under harsh and long-term continuous operation. ○ T-die: Based on straight manifold type and coat hanger type, with options for choke bars, lip types (general or bending lip), and lip adjustment methods. ○ Molding device: Diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber, charging bar), ear processing methods, winding methods, and more. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

We select and design/manufacture according to the application, considering the diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber), ear processing methods, winding methods, etc. 【Features】 ○ Power transmission part (reducer): Gears are made using special steel materials, crafted through meticulous processing and strict inspection, and thrust bearings are selected with ample margin, allowing for durability under harsh and long-term continuous operation. ○ T-die: Based on straight manifold type and coat hanger type, with options for choke bars, lip types (general or bending lip), and lip adjustment methods. ○ Molding device: Diameter of the casting roll, internal structure, surface finish, temperature control, adhesion devices (air knife, air chamber, static eliminator), ear processing methods, winding methods, etc. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

For thin materials, a downward pull type and casting roll method are used; for thick materials, a horizontal pull type and polishing roll method are employed. Additionally, the diameter, arrangement, temperature conditions, pressure, drive method, and ear treatment of the rolls are selected according to each specific purpose. 【Features】 ○ Power transmission part (reduction gear): Gears are made from special steel materials, manufactured through meticulous processing and strict inspection. Thrust bearings are selected with ample margins, allowing them to withstand harsh and long-term continuous operation. ○ Sheet die: Designed and manufactured according to purpose, including coat hanger type, fish tail type, and chalk bar type, as well as multi-layer types such as multi-manifold type and feed block type. ○ Depending on the type of sheet, options for stacking type (automatic/manual) with fixed-length cutting or continuous winding method (automatic/manual) are available for selection. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

For thin materials, a downward take-off type and casting roll method are used; for thick materials, a horizontal take-off type and polishing roll method are employed. Additionally, the selection is made based on the specific purpose, considering factors such as roll diameter, arrangement, temperature conditions, pressure, drive method, and ear treatment. 【Features】 ○ Power transmission part (reducer): Gears are made using special steel materials, crafted through meticulous processing and strict inspection. The thrust bearings are selected with ample margin, allowing them to withstand harsh and long-term continuous operation. ○ Sheet die: Designed and manufactured according to purpose, including coat hanger type, fish tail type, and chalk bar type, as well as multi-layer types such as multi-manifold type and feed block type. ○ Depending on the type of sheet, options for stacking type (automatic/manual) through fixed-length cutting or continuous winding method (automatic/manual) are available for selection. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

For thin materials, a downward take-off type and casting roll method are used; for thick materials, a horizontal take-off type and polishing roll method are employed. Additionally, the selection is made according to each purpose, considering factors such as roll diameter, arrangement, temperature conditions, pressure, drive method, and ear treatment. 【Features】 ○ Power transmission section (reduction gear): Gears are made from special steel materials, crafted through meticulous processing and rigorous inspection. The thrust bearings are selected with ample margin, allowing them to withstand harsh and long-term continuous operation. ○ Sheet die: Designed and manufactured according to purpose, including coat hanger type, fish tail type, and chalk bar type, as well as multi-layer options such as multi-manifold type and feed block type. ○ Depending on the type of sheet, options for stacking type (automatic/manual) through fixed-length cutting or continuous winding method (automatic/manual) are available for selection. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

The "Re-Pelletter" is a small hot-cut pelletizer handled by Tanabe Plastics Machinery Co., Ltd. Due to its hot-cut design, it produces clean pellets with uniform size and minimal powder. A tabletop model is also available, making it even more compact. The cutter unit can be attached to existing extrusion machines. Additionally, if you send your raw materials to us, we can create trial samples. Please feel free to contact us for more details. 【Features】 ■ Cost reduction ■ High-quality re-pellets ■ Compact size ■ Trial production available *For more details, please refer to the PDF document or feel free to contact us.

• Extrusion Machine
• Other processing machines
• plastic

Large-diameter and small-diameter pipes, small-diameter tubes, and their multilayer extrusion products, as well as coated products such as steel pipes, can be formed. 【Features】 〇 The dies include straight type, offset type, cross-head type, and internal structures such as spider type and spiral type, which are selected based on the type of resin and its application. 〇 Sizing primarily uses the outside method, but the inside method may also be used in conjunction. Additionally, vacuum sizing or vacuum tanks can be utilized as needed. 〇 The take-off machines include upper and lower roll types with 2 to 3 pairs, caterpillar types, and belt types, which are selected based on the shape and speed of the product. Furthermore, a remote-controlled operation stand can be installed near the sizing die inlet. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

Large-diameter and small-diameter pipes, small-diameter tubes, and their multilayer extrusions, as well as coated products such as steel pipes, can be formed. 【Features】 〇 The dies include straight type, offset type, cross-head type, and internal structures such as spider type and spiral type, with appropriate selections made based on the type of resin and its application. 〇 Sizing primarily uses the outside method, but the inside method may also be used in combination. Additionally, vacuum sizing and vacuum tanks can be employed as needed. 〇 The take-off machines include upper and lower roll types (2 to 3 pairs), caterpillar types, and belt types, with appropriate selections made according to the product shape and speed. Furthermore, a remote-operated control stand can be installed near the sizing die entrance. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

Large-diameter and small-diameter pipes, small-diameter tubes, and their multilayer extrusion, as well as coated products such as steel pipes, can be formed. 【Features】 〇 The dies include straight type, offset type, cross-head type, and internal structures such as spider type and spiral type, which are selected based on the type of resin and its application. 〇 Sizing primarily uses the outside method, but the inside method may also be used in combination. Additionally, vacuum sizing or vacuum tanks can be utilized as needed. 〇 The take-off machines come in various forms, including two to three pairs of rolls, caterpillar type, and belt type, and the appropriate one is selected based on the product shape and speed. Furthermore, a remote-controlled operation stand can be installed near the sizing die inlet. *For more details, please download the catalog or feel free to contact us.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from special steel materials that undergo rigorous inspection, and thrust bearings that have ample tolerance. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially treated steel materials for the gears and thrust bearings selected with ample margins after rigorous inspection. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from special steel materials that undergo strict inspection, and thrust bearings that have ample capacity. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from special steel materials that undergo rigorous inspection, and thrust bearings that have ample tolerance. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from special steel materials that undergo strict inspection, and thrust bearings that have ample tolerance. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance can be designed and manufactured, as well as specifications with heating methods using oil or steam. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from high-quality steel and thrust bearings that have ample margin for safety. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is a plastic extruder that can withstand harsh and long-term continuous operation, thanks to the use of specially selected gears made from high-quality steel and thrust bearings with ample margins that have undergone rigorous inspection. Depending on the application, specifications using cylinders with high wear resistance and corrosion resistance, as well as designs for heating methods using oil or steam, can also be designed and manufactured. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is designed to withstand harsh and long-term continuous operation, utilizing special steel materials for the gears that undergo rigorous inspection and thrust bearings that are selected with ample margin. 【Features】 ■ There are H-type (underwater hot cut type) for low viscosity and highly adhesive resins, J-type (water film hot cut type) for high viscosity and weakly adhesive resins, and A-type (air hot cut type) that can pelletize using only air cooling. ■ The die is simply structured and electrically heated. ■ Changing the particle size is also flexible. ■ The system layout is flexible, and it can be easily installed on existing extruders. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine

The "Plastic Extruder" from Tanabe Plastics Machinery is designed to withstand harsh and long-term continuous operation, utilizing special steel materials for the gears that undergo rigorous inspection and thrust bearings selected with ample margin. 【Features】 ■ There are H-type (underwater hot cut type) for low viscosity and highly adhesive resins, J-type (water film hot cut type) for high viscosity and weakly adhesive resins, and A-type (air hot cut type) that can pelletize using only air cooling. ■ The die is simply structured and electrically heated. ■ Changing the particle size is also flexible. ■ The system layout is flexible and can be easily attached to existing extruders. *Please feel free to contact us for inquiries regarding design and production. *Product catalogs can be downloaded and viewed from the link below.

• Extrusion Machine