フカガワ Product Lineup

We offer a variety of types of "duct clips." Our lineup includes a diverse range of duct clips, starting with the "L clip," as well as "C clips," "bolt clips," and more. 【Lineup】 ■ L Clip (S, M, L, with reinforcement) ■ C Clip ■ Clip (E Clip) *with fall prevention feature ■ Bolt Clip 2 ■ Hand Clipper ■ Lower Hook Clipper ■ Narrow Clipper *For more details, please refer to the PDF document or feel free to contact us.

We offer a variety of types of "duct corners." Our lineup includes a diverse range of chambers, starting with the "Easy Corner," as well as "Sharp Corner" and "Hole-less Corner." 【Lineup】 ■ Easy Corner ■ Sharp Corner with B-compatible hole ■ Hole-less Corner ■ Short Corner ■ Damper Corner ■ Mate Corner *For more details, please refer to the PDF document or feel free to contact us.

We handle various types of "duct flanges" at our company. Starting with the "TFD reinforced flange," we offer a diverse lineup of duct flanges, including "reinforcement plates" and "mate flanges." 【Product Lineup】 ■ TFD Reinforced Flange ■ Reinforcement Plate ■ Mate Flange *For more details, please refer to the PDF document or feel free to contact us.

We offer a variety of types of "guide vanes and guide frames." We have four options in our lineup: "Guide Vane (S, L)" and "Guide Frame (S, L)." 【Features of Guide Vanes】 - Please pay attention to the installation method when installing near blowers and similar equipment. - Guide Vanes L and S can be manufactured up to a maximum length of 3.0m according to your requested length. - The dimensions (length and width) of Guide Vanes and Guide Frames may vary by manufacturer. 【Available Materials】 Zinc

This is an inspection access door for ducts and air conditioning units. The "negative pressure air conditioning unit" has an outward-opening type, while the "positive pressure air conditioning unit" has an inward-opening type. Our company offers a variety of sizes for "inspection openings," ranging from 265mm x 265mm to 695mm x 925mm. Additionally, the FAD type comes with a dedicated insulation frame. It is adjustable in height and can be used according to the thickness of the insulation material. Please consider this as well!

This is an inspection access door for ducts and air conditioning units. Our company offers a variety of sizes of "inspection openings." We accommodate sizes ranging from 265mm x 265mm to 695mm x 925mm. *Type S requires a folded edge processing for installation on the opening surface. Additionally, the SD type comes with a dedicated insulation frame. Height adjustment is possible, allowing it to be used according to the thickness of the insulation material. Please consider this as well!

We handle "Inspection Ports for Kitchen Exhaust Ducts - Kitchen Check." In the Ministry of Land, Infrastructure, Transport and Tourism's Standard Specifications, 2016 edition, a new statement was added: "The waste duct of the kitchen must be installed in a way that allows for inspection inside the duct." If you are struggling or have concerns about compliance with the standard specifications, please consult us!! 【Strengths of Fukagawa's Kitchen Check】 - One-touch installation frame, installation can be visually confirmed - The door is completely removable, saving space - The door contains 50mm of rock wool, eliminating the need for insulation - Air resistance inside the duct is minimized You can check the product introduction and installation methods in the video!

Our company offers a variety of sizes of "inspection windows for round ducts." 【Strengths of Fukagawa's inspection windows for round ducts】 - Easy and quick to install - Excellent airtightness with a structure that sandwiches the duct metal plate between two main plates - Easily detachable with just the operation of two knobs - Compatible with both small and large diameters

We offer a variety of types of "Duct Eye and Measurement Port Base." Regarding the Duct Eye, we have multiple options available to meet customer needs in terms of shape (upright type and conical type) and material (zinc alloy and stainless steel). The measurement port base is a base for attaching a flow measurement port to a round duct. The part that connects to the surface of the spiral duct is made of rubber to prevent air leakage. Additionally, because it uses FEF, it can also be used for round ducts with a diameter of 100mm or more. Applicable materials: Zinc-coated steel sheet, Galvalume, Stainless steel.

We offer a variety of types of "processed canvas." Our lineup includes a wide range of processed canvas for general air conditioning, waterproofing, general air conditioning, and smoke exhaust systems. 【Product Lineup】 For General Air Conditioning - FN-810 Single-sided aluminum foil coated glass cloth For Waterproofing and General Air Conditioning - FN-050 Double-sided PVC coated polyester cloth - FN-123 Double-sided PVC coated glass cloth - FN-350 Double-sided PVC coated glass cloth For Smoke Exhaust Systems - FS-800H Single-sided aluminum foil coated glass cloth When placing an order for processed canvas, please provide instructions on the following items: 1. Material 2. Double (W) or Single (S) 3. Number of piano wires (hard steel wires) (P) 4. Stretch 5. Size (A×B×L dimensions) 6. Quantity

We handle "Easy Canvas" at our company. Compared to processed canvas, it uses canvas material, allowing for easy assembly and reducing processing time. We offer three types of specifications: "for common boards," "for angle FG," and "for one common board and one angle FG." Regarding materials, we have the following three combinations: - One side aluminum foil laminated glass cloth + double-sided vinyl-coated vinyl cloth - One side aluminum foil laminated glass cloth + one side aluminum foil laminated glass cloth - Double-sided vinyl-coated glass cloth + double-sided vinyl-coated glass cloth.

We handle a variety of types of "gaskets" at our company. Starting with "chloroprene gaskets," we offer a diverse lineup including "Esco gaskets" and "HFT duct gaskets." 【Product Lineup】 - FGK-101 Chloroprene Gasket - FGK-103 Esco Gasket - FGK-107 HFT Duct Gasket - FGK-109 Active Gasket (operating temperature below 100°C) - FGK-111 Active Gasket (operating temperature below 80°C) *In a public testing facility, a 24-hour strength test was conducted, confirming a shrinkage rate of 10% or less, but the operating temperature is not guaranteed.

We handle various types of gaskets. Starting with "butyl rubber gaskets," we offer a diverse lineup including "kitchen gaskets" and "sunsil ribbon gaskets." 【Product Lineup】 - FGK-302 Butyl Rubber Gasket (Operating Temperature: Up to 80°C) - FGK-306 Kitchen Gasket (Operating Temperature: Up to 100°C) - FGK-201 Sunsil Ribbon Gasket (Operating Temperature: Up to 150°C) - FGK-203 Active Lock Gasket (Operating Temperature: Up to 150°C) - FGK-205 Glass Ribbon Tape (Operating Temperature: Up to 150°C) *During official testing, a 24-hour strength test was conducted, confirming a stretch rate of 10% or less; however, the operating temperature is not guaranteed.

We handle various types of gaskets. Starting with "fluororesin gaskets," we offer a diverse lineup of gaskets, including "silicone rubber gaskets." Fluororesin gaskets are used for air conditioning and ventilation applications involving liquids that contain organic solvents, organic gases, and inorganic gases. Silicone rubber gaskets are designed for high-temperature kitchens, such as those used in Chinese cooking. They are also excellent in chemical resistance, making them suitable for ventilation applications involving fluids containing chemicals, such as in hospitals. [Product Lineup] - FGK-401 Fluororesin Gasket (Operating temperature below 260°C) - FGK-403 Silicone Rubber Gasket (Operating temperature below 200°C) *In public testing periods, a 24-hour strength test was conducted, confirming a stretch rate of 10% or less; however, the operating temperature is not guaranteed.

We handle a variety of types of "sealants." Starting with the "FK Duct Sealer," we offer a diverse lineup of sealants including "Bond Hyper Caulk with Anti-Mold Agent" and "Bond Deformable Silicone Caulk." 【Product Lineup】 - FK Duct Sealer - Bond Hyper Caulk with Anti-Mold Agent (Temperature Range -40℃ to +150℃) - Bond Hyper Caulk Tube with Anti-Mold Agent (Temperature Range -40℃ to +150℃) - Bond Deformable Silicone Caulk (Temperature Range -40℃ to +90℃) - FK Modified Silicone (with nozzle) - Fukagawa Duct Sealer - Sharpie Silicone S Pouch - Bond Urethane Caulk - Non-Prepainted *In public testing, a 24-hour strength test was conducted, confirming a shrinkage rate of 10% or less; however, the temperature range is not guaranteed.

We handle various types of "foam rubber insulation materials." Starting with "AEROFLEX," we offer a lineup of foam rubber insulation materials including "ArmaFlex" and "Durkflex." 【Features of FEF (Foam Rubber Insulation Material)】 1. Maintains insulation performance. There is no deterioration in thermal conductivity over time, and it maintains its initial performance for a long period. 2. Does not allow water or moisture to pass through. It has an independent bubble structure and forms a skin layer on the surface, preventing water absorption and moisture permeability. A moisture barrier is not required during installation. 3. Environmentally friendly. It does not use fluorocarbons (including alternative fluorocarbons). Being a foam material, it does not generate fiber debris, nor does it produce chips like rigid foam materials. 4. Good workability. It can be easily cut with commercially available utility knives. We also offer products with adhesive backing.

We handle various types of "auxiliary materials for foam rubber insulation." Starting with "Heat-resistant Brush Coating HG," we offer a diverse lineup of auxiliary materials for foam rubber insulation, including "FEF Adhesive Tape" and "Flange Covers." 【Product Lineup】 - Heat-resistant Brush Coating HG - Thinner - FEF Adhesive Tape - Black Aluminum Tape - Flange Covers

We handle various types of "Surface Material Coated Foam Rubber Insulation (LJ Sheet)." We also offer auxiliary materials for the installation of LJ Sheets. 【Features of LJ Sheet】 - This product integrates a synthetic resin-based exterior material with foam rubber insulation that has excellent weather resistance. - The synthetic resin-based exterior LJ cover is a laminated product made of flame-retardant resin substrate, aluminum foil, and weather-resistant special film. - It has a metallic appearance and is extremely lightweight. - Compared to general plastics, it achieves high weather resistance and boasts over 20 years of proven performance in construction and plant projects worldwide. - Being made of resin material, it can be cut with a utility knife. - The back side is treated with adhesive, allowing for easy installation by simply peeling off the release paper and sticking it to the duct. - There is no need to use troublesome adhesives for post-installation cleanup. - Suitable for outdoor use.