有限会社エムティプレシジョン List of Products and Services

Measurement is possible at a maximum of 250Hz, allowing for the scanning of cross-sections of tunnels, bridges, and concrete structures, and the acquisition of measurement data using a laser distance sensor. By sharing this measurement data with CAD data, it becomes possible to improve system efficiency. Sufficient effects can be achieved even with 2D data, not just 3D. With a measurement speed of 250Hz (maximum), a measurement accuracy of ±1mm, and a repeatability accuracy of ±0.3mm, sharing with CAD data that was not possible before becomes feasible. Our company provides comprehensive technical support, including usage instructions, implementation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. *For more details, please refer to the PDF materials or feel free to contact us.

• Distance measuring device

This is a "building clearance measuring device" that can measure the distance for railway operators and railway-related construction workers. Its main purpose is to be used for measuring the clearance from railway facilities such as tunnels, platforms, signals, and scaffolding or temporary structures associated with station redevelopment work. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous or single measurements to be performed automatically or manually. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or other devices. A dedicated base is used to install the measuring device on the track, and it can simultaneously measure cant and slack along with the building clearance measurement values. To measure, the base is installed on the rail, and the laser is directed at the desired measurement point while pressing the measurement switch. The horizontal distance from the rail surface and track center, as well as the height, are measured, and the measurement point is simultaneously plotted on the building clearance diagram, with the clearance value calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for confirmation of measurement results on-site ■ Inclination sensor included - Cant measurement is possible with the dedicated base ■ Compact & labor-saving - Has a widening measurement function *If you are interested in renting, please indicate your rental request by clicking the "Contact Us" button below.

• Distance measuring device

Our company provides comprehensive technical support, including usage instructions, implementation, development of control software, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) ■ Can connect up to 99 units simultaneously (RS422/RS485) * For more details, please refer to the PDF document or feel free to contact us. * The previous series of our non-contact laser distance sensors (DLS-C FLS-C series) is no longer available as it has been discontinued.

• Distance measuring device

Achieving a wide temperature range (-40 to 60℃), compliant with IP65, a measurement speed of 250Hz, and a measurement accuracy of ±1mm, this product can be used for automation in industrial applications. We provide comprehensive technical support, including usage instructions, implementation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) ■ Up to 99 units can be connected simultaneously (RS422/RS485) *For more details, please refer to the PDF document or feel free to contact us. *The previous series of our non-contact laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Distance measuring device

Logistics, within factories, civil engineering, maintenance of bridges, steel processes, and control of various heavy machinery, effectively utilize absolute distance measurement, displacement measurement, and positioning. By retrofitting existing cranes, we digitalize transportation routes to prevent collisions between transported items and between items and people. Tasks that were manually measured by humans are now automatically and accurately measured using laser distance sensors. Our company provides comprehensive technical support, including usage instructions, implementation, development of control software, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) *For more details, please refer to the PDF documentation or feel free to contact us. *Our old series of non-contact laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Distance measuring device

This is a building gauge measuring device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or similar devices. A dedicated base is used to install the measuring device on the track. To measure, the base is placed on the rail, and the laser is aimed at the desired measurement point before pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement point is plotted on the building gauge diagram, with the clearance values calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for confirmation of measurement results on-site ■ Compact and labor-saving - Includes widening measurement function *If you are interested in renting, please click the "Contact Us" button below and indicate your rental request.

• Distance measuring device

This is a building gauge measuring device for railway operators. Its primary purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or similar devices. A dedicated base is used to install the measuring device on the track, and it can simultaneously perform cant measurement and slack measurement along with building gauge measurement. To measure, the base is installed on the rail, and the laser is directed at the desired measurement point while pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement points are plotted on the building gauge diagram, calculating the clearance values. 【Features】 ■ Equipped with a color graphic LCD - Allows for on-site confirmation of measurement results ■ Inclination sensor included - Cant measurement is possible with the dedicated base ■ Compact & labor-saving - Has a widening measurement function *If you are interested in renting, please click the "Contact Us" button below and indicate your rental request.

• Distance measuring device

This is a building gauge measuring device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or similar devices. A dedicated base is used to install the measuring device on the track, and it can simultaneously perform cant measurement and slack measurement along with building gauge measurement. To measure, the base is installed on the rail, and the laser is directed at the desired measurement point while pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement points are plotted on the building gauge diagram, with the clearance values calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for on-site confirmation of measurement results ■ Inclination sensor included - Cant measurement is possible with the dedicated base ■ Compact and labor-saving - Includes widening measurement function *If you are interested in renting, please click the "Contact Us" button below and indicate your rental request.

• Distance measuring device

This is a building gauge measuring device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or similar devices. A dedicated base is used to install the measuring device on the track. To measure, the base is installed on the rails, and the laser is directed at the desired measurement point, after which the measurement switch is pressed. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement point is plotted on the building gauge diagram, with the clearance values calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for confirmation of measurement results on-site ■ Inclination sensor included - Capable of cant measurement with a dedicated base ■ Compact and labor-saving - Includes widening measurement function *If you are interested in rental, please indicate your rental request by clicking the "Contact Us" button below.

• Distance measuring device

This is a building gauge measuring device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or other devices. A dedicated base is used to install the measuring device on the track, and it is capable of measuring cant and slack simultaneously with the building gauge measurement. To measure, the base is installed on the rail, and the laser is directed at the desired measurement point, followed by pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement points are plotted on the building gauge diagram, with the clearance values calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for confirmation of measurement results on-site ■ Inclination sensor included - Cant measurement is possible with the dedicated base ■ Compact & labor-saving - Has a widening measurement function *If you are interested in rental, please click the "Contact Us" button below and indicate your rental request.

• Distance measuring device

This is a building clearance measuring device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. The rotation angle of the internal laser distance sensor is controlled by an internal motor, allowing for continuous and single measurements. The measurement results are saved to a microSD card, enabling serial data communication output to a PC or other devices. A dedicated base is used to install the measuring device on the track. To measure, the base is installed on the rails, and the laser is directed at the desired measurement point while pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and simultaneously, the measurement point is plotted on the building clearance diagram, with the clearance values calculated.

• Distance measuring device

This is a building gauge measurement device for railway operators. Its main purpose is to be used in railway facilities such as tunnels, platforms, and signals. It controls the rotation angle of the internal laser distance sensor with an internal motor to perform continuous and single measurements. The measurement results are saved to a microSD card, allowing for serial data communication output to a PC or similar devices. A dedicated base is used to install the measuring device on the track, and it can simultaneously measure cant and slack along with the building gauge measurement. To measure, the base is installed on the rail, and the laser is directed to the desired measurement point, followed by pressing the measurement switch. The horizontal distance from the rail surface and the track center, as well as the height, are measured, and at the same time, the measurement point is plotted on the building gauge diagram, and the clearance value is calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows for confirmation of measurement results on-site ■ Equipped with an inclination sensor - Cant measurement is possible with the dedicated base ■ Compact and labor-saving - Has a widening measurement function *If you are interested in rental, please indicate your rental request by clicking the "Contact Us" button below.

• Distance measuring device

To explain specifically: - Stochastic error (probabilistic error) arises from noise from components, the environment, or space. - Temperature error is dependent on the temperature of the components and materials used. - Color shift error is caused by differences in the characteristics of the measurement surface (black or white, and also reflectivity). Dimetix places importance on providing high-precision and accurate products as a trusted service to users, and we indicate the quality of our products at 2σ to ensure customers recognize it. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (RS232C/RS422/PROFINET/EtherNet/EtherCAT) ■ Compliant with IP65

• Laser Components

Our company does not handle dedicated sensors for specific applications and has only dealt with laser distance measuring sensors. To date, we have been involved in various fields such as civil engineering (measuring internal displacement in tunnels), steel and heavy industries (cranes, boring machines, etc.), woodworking and metal processing machines, monitoring, automated warehouses, and manufacturing process lines. We have received numerous requests asking, "Can sensors be used for this application?" and have worked together with customers to devise solutions, successfully measuring in many applications. Here, I would like to introduce one specific example. This is a measurement method to maintain a constant level of molten and liquefied glass inside a furnace. The level of the molten material in the furnace must not exceed a specified level, and the lower limit must be maintained at a stable level of -15 mm. Even in the harsh measurement environment of ultra-high temperature molten material at 1500°C, by placing the laser distance sensor at a distance, we achieved a measurement error of ±1 mm, and the measurement position could be visually confirmed using visible red laser light, enabling level measurement inside the glass melting furnace.

• Laser Components

As part of the construction work at the main station in Bern, the capital of Switzerland, we received an inquiry from a certain engineering office. Objective: Early detection of ceiling deformation in tunnels with beams In a typical tunnel, a fixed total station is used to regularly measure the positions of numerous reflective prisms installed on the tunnel ceiling. However, in tunnels where beams are installed between the ground and the ceiling, visibility is restricted, requiring more total stations than usual. Solution: Implement a two-step measurement method Step 1: Use our laser distance sensor to measure the distance between the beams and the tunnel ceiling. Step 2: Use a total station to measure the position of the ceiling beams. By simultaneously utilizing a distance measuring sensor for the challenging measurements from the beams to the ceiling, we were able to monitor 20 tunnel cross-sections with just 4 total stations instead of the usual 20, resulting in significant cost savings. The project was quickly realized thanks to the specialized support from the manufacturer.

• Laser Components

The social infrastructure that supports our daily lives. Infrastructure facilities support our lives, contribute to the revitalization of communities, and enrich our lives. On the other hand, in places unseen by us, aging is progressing and could lead to major accidents. Large structures such as bridges and tunnels. Until now, inspections have been managed through visual checks or sound testing methods, but we are facing a situation of a shortage of technicians for maintenance management and financial constraints. Bridges in the Ticino region of Switzerland are equipped with our sensors, utilizing communication devices to quickly grasp the condition of the structures and employing sensor monitoring technology to prevent major accidents such as collapses. This bridge spans a major road used by people traveling to Italy, and it regularly monitors the changes in deflection caused by the vibrations from passing cars and large trucks. The 'D-series' is a high-precision laser distance sensor that achieves high-speed measurements at 250Hz. Our product complies with IP65 and can measure in environments ranging from -40°C to +60°C. We provide comprehensive technical support, including usage instructions, implementation, development of control software, and post-installation support.

• Laser Components

The Dimetix laser distance sensor is a high-precision laser distance sensor suitable for industrial applications, achieving high-speed measurements of 250Hz. This product complies with IP65 and can measure in environments ranging from -40°C to +60°C. Furthermore, it can be connected simultaneously with up to 99 units (RS422/RS485). Our company provides comprehensive technical support, including usage guidance, installation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ Achieves high-speed measurement of 250Hz ■ Measures up to 100m (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40°C to +60°C ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) * For more details, please refer to the PDF document or feel free to contact us. * Our previous series of non-contact laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Laser Components

By using two or three laser distance sensors, a system can be constructed for measuring internal displacement in tunnels. It is very user-friendly due to its high precision (±1mm@2σ), compact size, and lightweight (350g), making system construction easy. The measurement distance can reach up to 100m (up to 500m when using a reflector), making it suitable for most tunnel environments. We offer two types of measurement temperature ranges: -10℃ and -40℃, making it suitable for measurements in Hokkaido. The waterproof rating is IP65. If necessary, an external cover can be applied for use. Our company provides comprehensive support for usage, implementation, control software development, and technical assistance. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m with dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Measurement temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) *For more details, please refer to the PDF document or feel free to contact us.

• Laser Components

As the shield machine is put into operation, are there any cases where distances, gaps, and intervals are measured manually? Due to labor shortages and the aging workforce, it is possible to establish automatic measurement using laser distance sensors. The measurement accuracy is 1mm, the repeatability is 0.3mm, and the measurement speed is up to 250Hz (fastest), achieving a measurement system that surpasses manual measurement. Our company provides comprehensive technical support, including usage instructions, implementation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) *For more details, please refer to the PDF materials or feel free to contact us. *The old series of our non-contact laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Laser Components

When transporting heavy objects over a distance of 50-100m, using encoders can lead to slippage, resulting in cases where accurate positioning is not possible. While it would be ideal to implement a mechanism that prevents slippage, it can be costly and inefficient. In such cases, an increasing number of users are employing laser distance sensors to measure positional information and control the crane's motor. This also eliminates the risk of collisions between cranes. The system operates at temperatures as low as -40°C, making it suitable for use in cold storage warehouses. With a measurement accuracy of 1mm, a repeatability of 0.3mm, and a measurement speed of 250Hz (maximum), sufficient positioning accuracy can be achieved for crane motor control. This eliminates the need for mechanisms to suppress slippage, resulting in a cost-effective system. This laser distance sensor is useful for transporting heavy objects and for use in cold storage warehouses. Our company provides comprehensive technical support, including usage guidance, implementation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. *For more details, please refer to the PDF materials or feel free to reach out to us.*

• Laser Components

In factories, civil engineering, bridge maintenance, steel processing, and control of various heavy machinery, it is effective for measuring absolute distances, displacements, and positioning. It can be retrofitted to existing cranes to digitalize transportation routes and prevent collisions between transported items and between items and people. It can operate in freezers at -40°C. Tasks that were manually measured by people can now be automatically and accurately measured with a laser distance sensor. 【Features】 ■ High-speed measurement achieving 250Hz ■ Measures up to 100m without a reflector (500m with a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40°C to +60°C ■ Compatible with various interfaces (RS232C/RS422/PROFINET/EtherNet/EtherCAT) ■ IP65 compliant Our company provides comprehensive technical support, including usage methods, implementation, control software development, and post-installation support. Demo units are also available for loan. If you have any concerns, please feel free to contact us. *For details on the "D Series," please refer to the materials available via the download button.

• Distance measuring device

The "D-Series" is a compact and lightweight laser distance sensor capable of measuring distances up to 500 meters with high precision. - It can be installed on existing overhead cranes to contribute to automation by mapping the factory in X/Y coordinates. - It allows for remote measurement of product length and thickness. This product complies with IP65 standards and can measure in environments ranging from -40°C to +60°C. Furthermore, it can connect up to 99 units simultaneously (RS422/RS485). Our company provides comprehensive technical support, including usage instructions, implementation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. 【Features】 ■ High-speed measurement achieving 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40°C to +60°C ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) * For more details, please refer to the PDF document or feel free to contact us. * Our old series of laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Distance measuring device

The "D-series" is a high-precision laser distance sensor that achieves high-speed measurement at 250Hz. This product complies with IP65 standards and can measure in environments ranging from -40℃ to +60℃. Furthermore, it can be connected simultaneously with up to 99 units (RS422/RS485). Our company provides comprehensive technical support, including usage instructions, installation, control software development, and post-installation support. If you have any concerns, please feel free to contact us. ▼ Rental (for a fee) available! Target model: DPE-10-500 Available for rental from as short as one day. *For details, please contact us via the inquiry button below. 【Features】 ■ High-speed measurement at 250Hz ■ 100m measurement (500m when using a dedicated reflector) ■ Compact and lightweight at 350g (140x78x48mm) ■ Operating temperature range -40℃ to +60℃ ■ Compatible with various interfaces (PROFINET/EtherNet/EtherCAT) *For more details, please refer to the PDF document or feel free to contact us. *The previous series of our non-contact laser distance sensors (DLS-C FLS-C series) has been discontinued as stock has run out.

• Distance measuring device
• Other measurement, recording and measuring instruments

The "LDM300A" is a tunnel cross-section/building clearance measuring device capable of limit measurements with a high precision of only ±3mm. The base is installed on the rail, and a laser is projected onto the measurement point. The horizontal distance from the rail surface and the track center, as well as the height, are measured. At the same time, the measurement points are drawn on the building clearance diagram, and the separation values are calculated. 【Features】 ■ Equipped with a color graphic LCD (allows confirmation of measurement results on-site) ■ Equipped with an inclination sensor (can measure cant with a dedicated base) ■ Compact and labor-saving (has a widening measurement function) *Short-term rentals (from 1 day) are also available. If you wish to rent, please contact us via the inquiry form and indicate "Rental Request."

• Distance measuring device

The "Building Clearance Measuring Device" is designed for railway operators and railway-related construction workers to measure clearances. Its main purpose is to be used for measuring clearances with railway facilities such as tunnels, platforms, signals, and scaffolding or temporary structures associated with station redevelopment work. ○ Building Clearance Measuring Device "LDM200A" This is a total station type measuring device that can measure building clearances from outside the building clearance limits, such as on platforms or beside tracks. <Features> ■ Can measure without entering the building clearance limits ■ Allows for rough confirmation of measurement point locations on-site ■ Equipped with a color graphic LCD ○ Building Clearance Measuring Device "LDM300A" This device controls the rotation position of the laser distance meter with a motor, enabling continuous equidistant measurements for tunnel cross-section measurements. <Features> ■ On-site confirmation of measurement results is possible ■ Measurement data can be saved to a microSD card ■ Data can be sent from the measuring device to a PC, allowing for more detailed results to be examined in CAD *For more details, please download the PDF or contact us. If you are interested in rental, please indicate your rental request in the "Contact Us" button below.

• Other measurement, recording and measuring instruments

The home construction limit measuring device "LDM200A" allows for limit measurement without entering the limit area. It can be measured non-contact, making it possible for one person to perform the measurement. The red laser enables visibility of the measurement position. 【Features】 ○ Capable of measuring limits for non-electrified, DC, AC, and Shinkansen with a single unit ○ Customization available * For more details, please contact us or download the catalog. * We also offer demo unit loans/rentals. Please feel free to contact us.

• Other measurement, recording and measuring instruments

Our tunnel cross-section/building limit measuring device 'LDM300A' can perform automatic tunnel cross-section measurement and pinpoint measurement with just one unit. By installing the base on the rail and directing the laser at the desired measurement location, you press the measurement switch. The horizontal distance from the rail surface to the track center and the height are measured, and at the same time, the measurement points are drawn on the building limit diagram, and the separation values are calculated. 【Features】 ■ Equipped with a color graphic LCD - Allows confirmation of measurement results on-site ■ Equipped with an inclination sensor - Capable of cant measurement with a dedicated base ■ Compact & labor-saving - Has a widening measurement function *If you are interested in renting, please click the "Contact Us" button below and indicate your rental request.

• Distance measuring device

"LP-200" Land surveys and simple measurements, railway surveys and measurements, archaeological site surveys and measurements, high-altitude and hazardous area measurements. It can measure horizontal distances and heights up to 500m. [Sight Telescope] ○ Image: Erect image ○ Magnification: 12x ○ Field of view: 1°20' *For more details, please contact us or download the catalog.

• Other measurement, recording and measuring instruments

The digital flow meter "MCM Series" uses coefficients from flow meters that have passed the Celes certification, which are set in the counter for use. By selecting the measurement time, you can easily measure the flow rate by simply pressing the measurement switch. Additionally, the measurement values can be transferred to a PC for management in Excel. 【Features】 ○ Adoption of contactless sensors (Hall elements) allows stable flow rate measurement from low to high speeds ○ Simple operation by selecting the measurement time and just pressing the start switch ○ Flow rate in mm, propeller rotation speed, and calculation time are displayed on the LCD ○ Three types available (MTS-1: for standard flow meters / MTS-2: for micro flow meters / MTS-3: for flood flow meters) *For more details, please contact us or download the catalog. Feel free to reach out to us.

• Other measurement, recording and measuring instruments