宮惣ケミカル List of Products and Services

A disposer is a machine that is installed in the kitchen sink drain to grind and process food waste, allowing it to be washed away with water. It enables easy disposal of food waste right at the source, helping to maintain cleanliness and prevent unpleasant odors. It can be installed in most kitchens, and its operation is very simple, making it safe for elderly individuals and those who are not comfortable with machines to use. **Benefits of a Disposer:** - Eliminates the need for a triangular corner, allowing for a wider use of the sink. - No need for cleaning slime and other residues. - Allows for food waste disposal while washing dishes. - Prevents unpleasant odors. - Prevents pests. - Reduces the burden of taking out the trash. - Has less environmental impact compared to incineration. If you are considering installing a disposer or have any doubts about the installation, please feel free to contact us.

• Other food machinery

Drone inspections have been legally recognized as having the same level of accuracy as sounding rod inspections due to the amendment of Article 12 of the Building Standards Act on April 1, 2022. In traditional inspection methods, workers conducted inspections using sounding rods or took images of the exterior walls from the ground using infrared cameras, followed by image analysis for inspection. However, these methods resulted in prolonged investigation periods and made it impossible to inspect higher areas. With drone inspections, it is possible to inspect high areas using drones equipped with infrared cameras. Additionally, by converting inspection points into thermographic images to identify anomalies based on temperature differences, defects in high or narrow areas that were previously unobservable by human efforts can now be discovered. (Features) - Sounding rod inspection → Workers need to set up scaffolding for inspections, incurring labor and equipment costs. - Drone inspection → Inspections are conducted using drones, eliminating the need for scaffolding and reducing labor and equipment costs.

• Contract Inspection

Drone inspections have been legally recognized as having the same level of accuracy as sounding rod surveys due to the amendment of Article 12 of the Building Standards Act on April 1, 2022. In traditional inspection methods, workers conducted inspections using sounding rods or took images of the exterior walls from the ground using infrared cameras, followed by image analysis. However, these methods resulted in long inspection periods and made it impossible to inspect high-rise areas. With drone inspections, it is possible to inspect high-rise areas using drones equipped with infrared cameras. Additionally, by converting inspection points into thermographic images and identifying anomalies through temperature differences, defects in high or narrow areas that were previously unobservable by human effort can now be detected. *For more detailed information or specific case studies, please feel free to contact us.*

• Contract Inspection

A disposer is a food waste disposal unit installed directly under the kitchen sink that grinds food waste and discharges it into the drainage pipe along with water. The operation of the disposer is quite simple: 1. Turn on the water 2. Activate the disposer 3. Turn off the disposer 4. Turn off the water That's all there is to it. As long as you follow this order, there is almost no chance of clogging the pipes. The key is to start by running water. As long as water is flowing, the ground food waste will be pushed out sequentially, preventing accumulation in the pipes. However, if you do not run water or if the amount of water is insufficient, there is a risk of clogging the pipes, which can lead to issues with the disposer itself. If a clog occurs, it will require specialized tools or the assistance of a professional. 【Features】 - Easy disposal of food waste as it is generated - Clean - Odor prevention *If you would like to know more details or specific examples, please feel free to contact us.

• Other food machinery

A disposer is a food waste grinder installed under the sink. Since it is placed just below the kitchen sink drain, it is a cleaning-friendly and hygienic waste disposal system that prevents food waste from accumulating in the sink. When vegetable scraps and other food waste generated during cooking are fed into the disposer, an internal motor drives a rotating hammer (blade) that uses centrifugal force to smash the waste against the device's outer wall. This process occurs while water is flowing, allowing the waste to be carried away with the water into the sewage system.

• Other food machinery

Drone inspections were legally recognized with the revision of Article 12 of the Building Standards Act on April 1, 2022. In traditional inspections of exterior walls conducted by workers, costs were incurred for preparing scaffolding, and in the case of sounding surveys, a large number of personnel and time were required for extensive inspections. With drone inspections, as long as there is an operator for the drone, the inspection work can be carried out. Additionally, since the operation of the drone and the analysis of aerial footage are generally automated, compared to traditional inspection methods, fewer necessary equipment and reduced personnel can lead to more efficient inspections, shortening the duration of inspections and making it possible to lower inspection costs. 【Advantages of Adoption】 ■ Cost reduction ■ Shortened inspection period ■ Reduced manpower For more details, please download the materials or contact us.

• Contract Inspection

Drone inspections were legally recognized with the revision of Article 12 of the Building Standards Act on April 1, 2022. In traditional exterior wall inspections, workers often used tapping rods due to accuracy issues, which required a long time to conduct extensive inspections. Additionally, scaffolding was necessary for workers to perform the inspections, further increasing the time needed to prepare equipment. (Features of Drone Inspections) - No need to set up scaffolding - Capable of extensive inspections from the air - Significantly reduces inspection time For more details, please contact us or download the catalog.

• Contract Inspection

Drone inspections have been legally recognized as having the same level of accuracy as traditional tapping rod inspections since the revision of Article 12 of the Building Standards Act on April 1, 2022. In traditional tapping rod inspections, workers had to set up scaffolding and inspect each exterior wall with a tapping rod, which posed a risk of falling and was very dangerous. In drone inspections, workers operate a drone equipped with an infrared camera from the ground, capturing aerial images of the exterior walls for inspection, eliminating the risk of falling and allowing for safe inspections. *If you would like to know more details or specific examples, please feel free to contact us.*

• Contract Inspection

The inspection mandated by Article 12 is required for owners and managers of specific buildings as defined by government ordinances and designated administrative agencies. Drone inspections were legally recognized with the amendment to Article 12 of the Building Standards Act on April 1, 2022. In traditional inspections using tapping rods, workers had to set up scaffolding to inspect the exterior walls with tapping rods, which incurred costs and extended inspection periods, as well as posed a risk of falling accidents. However, exterior wall inspections using drones do not require scaffolding or other equipment, as they utilize drones equipped with infrared cameras to inspect the walls, allowing for cost reductions and shorter inspection periods. Additionally, since workers operate the drones from the ground, concerns about falling accidents are eliminated. *If you would like to know more details or specific examples, please feel free to contact us.*

• Contract Inspection

A disposer is a machine that is installed in the sink's drain to grind and process food waste. There are different types of disposers based on their operation method, mainly "continuous feed" and "batch feed." (Features) - Continuous feed: By having a dedicated switch, it prevents splashing even when the lid is open, allowing for continuous grinding and processing of food waste. - Batch feed: This is the mainstream type in Japan, where the lid acts as a switch. After placing the food waste inside and turning the switch, it operates. Since it cannot be used while in operation, it can be safely used by those who are using a disposer for the first time. For more details, please contact us or download the catalog.

• Other food machinery

A disposer is a machine that is installed in the sink's drain to grind and process food waste. There are two types of disposers: "direct discharge" and "treatment tank." The main difference between the two lies in the system that allows food waste to flow into the sewage system. The "direct discharge" type directly sends the ground food waste into the sewage, while the "treatment tank" type routes the waste through a dedicated wastewater treatment tank before it flows into the sewage system. (Features) - Direct discharge: Lacking wastewater treatment functionality, it cannot process waste properly, leading to a significant environmental burden as waste flows directly into the sewage system. - Treatment tank: By installing a small purification tank, it purifies the waste before discharging it into the sewage, thereby reducing the burden on municipalities and lessening the environmental impact.

• Other food machinery

Drone inspections were legally recognized on April 1, 2022, due to the amendment of Article 12 of the Building Standards Act. Traditional inspections using tapping rods require scaffolding and the use of tapping rods, which incurs costs. A large number of personnel is needed for extensive inspections. (Features of Drone Inspections) - Reduction in the number of personnel required for inspection work - Fewer equipment requirements compared to traditional methods - Inspections can be completed in a short period - Reduction in inspection costs

• Contract measurement

Drone inspections were legally recognized on April 1, 2022, due to the revision of Article 12 of the Building Standards Act. In traditional hammering inspections, scaffolding was set up, and workers manually inspected the exterior walls using a hammering rod, resulting in longer inspection periods and increased work time. (Features) - Inspection time can be shortened as extensive inspections can be conducted from the air. - Inspections can be completed in a short period. *If you would like to know more details or specific examples, please feel free to contact us.

• Contract measurement

Drone inspections were legally recognized with the revision of Article 12 of the Building Standards Act on April 1, 2022. In traditional tapping rod inspections, scaffolding was required, and workers used tapping rods to conduct inspections, which posed a risk of falling and was dangerous. With drone inspections, workers operate drones equipped with infrared cameras from the ground, capturing aerial images of the exterior walls for inspection, eliminating the worry of falling and allowing for safe inspections. (Features) - Traditional tapping rod inspections → Longer inspection periods and higher costs - Drone inspections → Shorter inspection periods and costs reduced to about half

• Contract measurement

This time, the site involved the replacement of a disposer due to renovation work. We received a direct request from the customer, and upon checking the site, we found that they were using a continuous feed type. This household has been fond of disposers for a long time, and this is their third unit. The model installed is the "Ecologic 6" from Anaheim, and the operation method is the same continuous feed disposer that was used previously. If you have any inquiries regarding the installation or replacement of disposers, please feel free to contact us anytime.

• Other food machinery

Drone inspections have been recognized as having equivalent accuracy to hammer testing investigations due to the amendment of Article 12 of the Building Standards Act. Traditional hammer testing required scaffolding to allow workers to inspect the entire exterior wall, which was time-consuming and costly. Infrared inspections, where workers used infrared cameras from the ground to capture images for analysis, reduced time and costs, but in some cases, it was not possible to capture the exterior wall directly from the front, making it impossible to properly inspect higher sections. However, with drone inspections, using drones equipped with infrared cameras for aerial photography eliminates the need for scaffolding or other equipment, significantly reducing costs and time compared to traditional exterior wall inspections. Additionally, it allows for capturing the exterior wall directly from the front and horizontally, enabling inspections of higher sections as well. **Benefits of Drone Inspections:** - Accurate estimates possible - Reduced inspection costs - Inspections can be completed in a short time - Safe exterior wall inspections possible

• Contract measurement

Drone inspections were legally recognized on April 1, 2022, following the amendment of Article 12 of the Building Standards Act. The inspection method involves using a drone equipped with an infrared device to take aerial shots of the inspection target, measuring temperature differences on the tile surface with the infrared device to detect any lifted areas. Traditional inspections require two types of methods: tapping surveys and infrared surveys, both of which involve workers inspecting the exterior walls, making them time-consuming and costly. However, with drone inspections, the inspection is conducted by capturing aerial images of the target with a drone, eliminating the need for scaffolding and other equipment compared to traditional methods, thus reducing costs and time. (Features) - No need for scaffolding or other equipment - Cost reduction - Inspections can be completed in a short period *If you would like to know more details or specific examples, please feel free to contact us.

• Contract Inspection

A "disposer" is a machine that grinds and processes food waste generated during cooking. By introducing a disposer, you eliminate the need for a triangular corner, reduce decaying matter throughout the house, and significantly decrease pests. Our company offers various types, including the commonly used "continuous feed" in the United States and the mainstream "lid switch" in Japan. (Features) Continuous Feed: By providing a dedicated switch, it prevents splashing even when the lid is open, allowing you to continuously feed food waste without the need to operate it each time. This is recommended for those who want to process food waste without stress. Lid Switch: This is mainstream in Japan, where the lid acts as a switch. It operates when you turn the switch after adding food waste. Since you cannot add waste while it is operating, it is safe for first-time users of the disposer. If you are considering installing a disposer or have concerns or hesitations about installing one, please feel free to contact us.

• Other food machinery

The disposer is a household appliance invented based on the request of housewives who wanted to do something about unpleasant kitchen waste. It allows for easy processing of kitchen waste right at the source, keeping things clean and preventing bad odors. It is also very easy to use, making it safe for elderly individuals and those who are not comfortable with machines. **Benefits of the disposer:** - No need for a triangular corner - No need for cleaning slime, etc. - Can process kitchen waste while doing dishes - Prevents bad odors - Prevents pests - Reduces the amount of garbage - Less environmental impact compared to incineration If you are considering installing a disposer or are unsure about the installation, please feel free to contact us.

• Other food machinery

A new disposer was installed at the home of an elderly couple. They decided to introduce the disposer after realizing that taking out the trash had become a burden. The operation of the disposer is very simple, requiring only the ON/OFF switch, making it easy for elderly individuals and those who are not comfortable with machines to use it with confidence.

• Other food machinery

This time, the site had a sink with a special drain shape, but it was successfully installed without any issues thanks to the use of a dedicated adapter and special processing work. After installation, the usability of the kitchen, including the cabinet, remains unchanged and is just as it was before. Our company can generally install any type of sink, so please feel free to consult us first.

• Other food machinery

After many years of considering the introduction of a disposer, we were fortunate to be able to carry out the installation work for your household. It seems that you had given up on the idea due to the special shape of the drain, but we successfully completed the installation using a dedicated adapter.

• Other food machinery

The customer this time became interested in a disposer while preparing to start cooking for themselves due to a job transfer and decided to install one. Before the installation, they were hesitant to cook for themselves because of the cleaning required for the sink drain, but since the installation, they seem to be more committed to cooking as they are now free from drain cleaning. In cases like this, when installing in a rental property, it may not be possible depending on the owner's intentions. If you are considering installation, please check whether there is any mention regarding the installation of a disposer in the rental agreement. Additionally, depending on the shape of the sink, construction involving cutting or drilling may be necessary. In such cases, please understand that installation is generally not allowed in rentals. (However, there may be cases where the owner agrees to the construction after negotiation.)

• Other food machinery

A new disposer has been installed. This household receives a lot of fruit from relatives who are farmers. Fruits have surprisingly large amounts of waste parts like pulp, cores, and seeds, but with a disposer, they can be processed without any issues.

• Other food machinery

This time, we installed a disposer in the apartment building. The installation of the disposer has received positive feedback as it eliminates food waste and reduces the burden of taking out the trash. If you move according to your life plan, you can also relocate your disposer, so feel free to leave it to us. For any inquiries regarding the installation work of the disposer, please contact us anytime.

• Other food machinery

This time, the site featured the popular Panasonic system kitchen for kitchen renovations. In renovations of condominiums with disposers, kitchen replacement work is sometimes carried out. In general kitchen renovations, when installing a disposer, it is often the case that only stainless steel sinks can be chosen. This is because modern system kitchen drainage outlets are often of a one-piece molded type, and in the case of artificial marble sinks, there is often not enough opening size required for installing a disposer. Our company also performs retrofitting installation work for disposers, even with such artificial marble sinks. If you have any questions about the content, please feel free to contact us.

• Other food machinery

This site involves the renovation of a condominium with a disposer, and it is a remodeling construction site that includes moving the kitchen. To prevent the plumbing contractor from having to return to the site, our company handles the connection for the disposer drainage. After the installation of the disposer is complete, we check the operation of the disposer and inspect each connection for leaks. If there are no issues, we will seal the sink and wait for the handover. If you have any inquiries regarding the installation of disposers, please feel free to contact us at any time.

• Other food machinery

This time, we received a request from a customer living in a two-family house to install a new disposer. Among various home appliances, the disposer is the easiest to use, so even elderly people or those who are not good with machines can use it with confidence.

• Other food machinery

This time, we replaced the disposer based on a contact from a local plumbing company. The customer consulted us about issues with their disposer, and upon researching available contractors, they found our company and reached out to us. After receiving the request and checking the site, we found that they were using an old model made by Anaheim. They reported unusual noises during operation, and upon closer inspection, we discovered that the swing hammer inside the grinding chamber had fallen off due to corrosion, and there was visible wear and tear in various places due to age. We determined that replacing it with a new unit would be more cost-effective than repairing it, so we replaced it with a similar type of product. Additionally, there was no trap installed in the plumbing before the replacement, which made it easier for odors to rise, so we implemented a solution using an S-trap. If you experience any issues with your disposer, please feel free to consult us.

• Other food machinery

This time, we installed a disposer in Panasonic's seamless sink (stainless steel type). Normally, this sink cannot accommodate a disposer due to its narrow drain diameter, but our company can modify the sink to make it possible. Since the inlet of the disposer is also made of stainless steel, it blends well with the sink made of the same material, resulting in a finish that feels seamless. The storage space under the sink can be adjusted to accommodate the disposer, so while it may not have the same storage capacity as before, we can secure as much storage space as possible while allowing you to use the disposer with almost the same kitchen usability as before.

• Other food machinery

This time, we installed a disposer at a family's home in Wakayama Prefecture. The model installed is Emerson's "AC-105," which operates on a "continuous feed" system. If you are considering installing a disposer or have hesitations or concerns about it, please feel free to consult with us.

• Other food machinery

Our company sells and installs disposers. This time, we installed a disposer at the Nishinomiya family's home. The model installed is the "YS-8100," which operates with the commonly used "lid switch" method in Japan. The operation is simply turning the switch ON/OFF, so even first-time users can use it with confidence. If you are considering installing a disposer or have any doubts or concerns, please feel free to consult us.

• Other food machinery

Thank you for visiting the page of Miyaso Chemical Co., Ltd. If you are considering installing a disposer to increase the added value of your property, you may be worried about whether new tenants will use it properly even if it is installed. However, using a disposer is quite simple. Flow water → Turn on the disposer → Turn off the disposer → Stop the water. That's all there is to it. As long as you follow this order, there is almost no chance of clogging the pipes. The key is to start by flowing water. As long as water is flowing, the ground food waste will be pushed out sequentially, preventing it from accumulating in the pipes. However, if no water is flowed at all or if the amount of water is insufficient, the ground food waste will remain in place, causing the pipes to clog. This can lead to clogging even when the disposer itself is functioning properly. If clogging occurs, it will require specialized tools or the assistance of a professional service to resolve. It starts with water and ends with water. This is the simplest way to prevent clogging the pipes. *If you would like to know more details or specific examples, please feel free to contact us.

• Other food machinery

At Miyaso Chemical, we conduct inspections of building exteriors using drones. Traditional inspections using scaffolding for visual checks and tapping rods resulted in longer inspection periods and higher costs. By using drones for inspections, there is no need to set up scaffolding, which allows for significant reductions in both delivery times and costs! Additionally, inspections are possible not only for building exteriors but also for silos used for ready-mixed concrete and documentation. If you have concerns such as "I want to conduct inspections for safety and accident prevention, but I want to keep costs as low as possible," please feel free to consult with us!

• Contract Inspection

Miyaso Chemical Co., Ltd. conducts statutory inspections under Article 12 of the Building Standards Act using drones. Traditionally, inspections required scaffolding and the use of tapping rods, resulting in long inspection periods and high costs. However, inspections using drones significantly shorten the inspection period and reduce costs to about half. If it is difficult to conduct inspections solely with drones due to the proximity of neighboring buildings, we can propose inspections that combine traditional methods. We can provide estimates if we have the address and elevation drawings of the property to be inspected. Please feel free to consult us when needed. 【Features】 ■ Short inspection periods and costs reduced to about half ■ Ability to propose inspections that combine traditional methods ■ Estimates available with the address and elevation drawings of the property to be inspected *For more details, please refer to the PDF materials or feel free to contact us.

• Contract Inspection

Highly popular residential equipment disposers. We offer sales and installation services. We have a variety of products including the world’s number one brand from Emerson in the USA, domestic products, continuous feed types, lid switch types, and commercial models. Our company can install almost all types of kitchens thanks to special processing. Please consult us even for kitchens you may have previously given up on installing a disposer.

• others

Three birds with one stone for image enhancement, advertising, and environmental issues.

• Other consumables

In addition to this, there are various types such as round, square, and those with pits. We offer sizes ranging from 40 liters to 20,000 liters.

• tank

In EGSB, by promoting the granulation of the microbial bed (granular) and expanding it, it has become possible to increase the contact efficiency between the granules and the drainage.

• Other water treatment equipment

Compared to the commonly distributed polyethylene, it has a lower combustion calorific value and does not damage the furnace. Of course, there is no generation of dioxins like with PVC.

• Other consumables

We can provide purification tanks for more than five people in any size. We also have high-performance models that keep BOD below 10 mg/liter.

• Other water treatment equipment

PET bottles collected from consumers are recycled into unsaturated polyester through the processes of crushing, washing and dehydrating, decomposition, synthesis, and mixing in chemical recycling.

• Other services