トーア電子 List of Products and Services

This is a device designed for research and development that allows testing under conditions close to actual machines while being compact. It also supports etching tests for double-sided processing substrates, enabling etching tests to be conducted with less liquid volume compared to actual machines. It accommodates substrate sizes of 200mm or smaller, but we can also propose etching test machines that support substrate sizes larger than 200mm. Additionally, by using fixtures, it is easy to set up the substrates.

• Etching Equipment

This device enables plating tests under conditions closer to actual equipment. By oscillating laterally, simple plating tests can be conducted under vertical transport conditions. Additionally, by replacing the anode case, both soluble and insoluble options can be examined. Furthermore, conducting plating tests with substrate sizes allows for verification that is closer to actual equipment.

• Plating Equipment

In today's world where electronic devices are widespread, the importance of EMC is increasing. Don't you think that when you look into EMC, it is filled with technical terms that are hard to understand? Therefore, this document has been created with content that is easy for anyone to understand, avoiding technical jargon as much as possible. It will be useful not only for beginners but also for those who are struggling to explain the overview of EMC. Additionally, our company has established a simple EMC testing room in Toyoake City, Aichi Prefecture, where we can conduct tests such as EMS testing, EMI testing, and electrostatic testing. *Please check the related links for an overview of the testing site and details on the testing items, or feel free to contact us.

• EMC Testing
• EMC countermeasure products
• EMS

We have various testing facilities for investigating the effects and causes of electromagnetic waves. We can evaluate the operational state when the AC power supply voltage momentarily drops and then recovers, starting with the "Voltage Dip and Short-Time Power Interruption Test," as well as the "Electrostatic Discharge Immunity Test," which assesses resistance when electrostatic noise is applied to key areas. The usage fees will be provided in a quotation based on the test content. Please feel free to consult us when needed. 【Overview of the Testing Site】 ■ Type: 3m Method Simple Anechoic Chamber ■ Size of the testing room (Depth × Width × Height, m): 7 × 3 × 3 ■ Power Supply Equipment: Maximum power supply capacity of single-phase 2kVA ■ Turntable: Diameter 1.2m / Load capacity 200kg ■ Antenna Positioner: Elevation range 1 to 1.9m Site Address: [Toyohashi City, Aichi Prefecture] Near Nagoya City * For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• EMC/Static electricity measuring equipment
• EMS

We would like to introduce our developed "Conveying Ring Roll." In terms of both material and shape, it offers higher flexibility compared to commonly used main components such as PP, PE, and Teflon, reducing impacts on the substrate. Additionally, the grip on the ring surface is high, and its conveying performance (such as product waviness) is excellent. The "Thermo Ring" is more cost-effective compared to materials like Teflon and is designed as a product aimed at cost reduction. For areas requiring heat resistance, such as drying processes, we have developed products using different materials. 【Features】 ■ High flexibility, reducing impacts on the substrate ■ High grip on the ring surface ■ Excellent conveying performance (such as product waviness) *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines
• Other physicochemical equipment
• Other surface treatment equipment

The "Roll to Roll (RtoR) Plating Device" is a product designed to minimize the installation space of the equipment by transporting substrate film in a vertical direction. EPC (Edge Position Sensors) are placed at various points of the device. This allows for stable transport capability without deviation while the substrate is being transported vertically. The device can continuously plate films using the RtoR method, and it is compatible with various plating types such as Cu, Ni, Au, and Sn, suitable for both thick and thin films. 【Features】 ■ Continuous plating of films using the RtoR method ■ Space-saving design ■ Stable transport with EPC ■ Horizontal transport device for wide compatibility *For more details, please refer to the PDF document or feel free to contact us.

• Plating Equipment

The "Chemical Polishing Device" is a product that roughens the surface of copper foil to improve the adhesion of laminates. The spray nozzle pipe can be switched between vertical and horizontal arrangements, allowing it to accommodate various product conditions. The oscillation of the chemical polishing section is equipped with a function to adjust the angle of the swing, in addition to speed adjustment through electric control, enabling the spray balance to be maintained evenly. 【Features】 ■ Renders the surface of copper foil rougher to enhance laminate adhesion ■ Accommodates various product conditions ■ The spray nozzle pipe can be switched between vertical and horizontal arrangements *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other surface treatment equipment

This product is a patterning development device after exposure processing. Thanks to our unique spray arrangement, uniform development processing is achieved. We have adopted transport rolls that are less prone to slipping, which reduces damage to the resist caused by product waviness. Additionally, the lid of the development chamber opens wide, providing excellent maintenance accessibility. 【Features】 ■ Capable of uniform development processing ■ Adoption of transport rolls that are less prone to slipping ■ Reduces damage to the resist caused by product waviness ■ High maintenance accessibility *For more details, please refer to the PDF document or feel free to contact us.

• Wafer
• Other surface treatment equipment

We propose a surface treatment device that condenses our unique manufacturing technology. In recent years, with the increasing complexity of three major types of circuits—flexible printed circuits (FPC), rigid printed circuits, and packages—we handle various surface treatment devices such as plating equipment, developing, etching, and stripping equipment (DES), and cleaning devices that respond to the trends of high density and miniaturization. We take full responsibility for the design, manufacturing, assembly, construction, and maintenance of various devices.

• Etching Equipment
• Plating Equipment
• Other surface treatment equipment

The "SUS Etching Device" is a product that etches patterned SUS foil. Thanks to our uniquely developed design for the arrangement of transport components (rolls), stable transport is possible even for ultra-thin products without wrinkles, corner bends, or dents. An automatic management system for spray pressure, chemical concentration and temperature, and chemical specific gravity continuously creates an appropriate etching balance, maintaining consistent product quality. 【Features】 ■ Etches patterned SUS foil ■ Adopts an automatic management system ■ Stable transport of ultra-thin products *For more details, please refer to the PDF document or feel free to contact us.

• Etching Equipment

The "Glass Cleaning Device" is a product that removes organic compound stains that are difficult to eliminate with wet cleaning processes through a dry cleaning process using UV irradiation. It adopts a cleaning method with low environmental impact. At the same time, by changing the surface of the substrate to be hydrophilic, it also enhances the cleaning effect in subsequent processes. The energy generated by the bursting of fine bubbles created by an ultrasonic generator installed in the dip tank lifts dirt from the surface of the substrate. This fine bubble action allows for the removal of small dirt particles, enabling highly precise cleaning. 【Features】 ■ Adopts a cleaning method with low environmental impact ■ Dry cleaning process using UV irradiation ■ Uses an environmentally friendly non-electrode UV irradiation unit ■ Removes fine dirt with fine bubbles *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines
• Ultrasonic Cleaner

- It can be switched to various processes. - It can accommodate various types of metal plating. - We propose compact equipment that is efficient and highly maintainable. - It is suitable for processing large substrates and similar items. - Individual current management for each processing tank or hanging fixture is possible, making it easy to select multiple processing steps. *For more details, please refer to the PDF document or feel free to contact us.

• Plating Equipment

The "Roll-to-Roll (RtoR) Film Etching Device" continuously etches roll-to-roll films. In roll-to-roll (RtoR) film transport, excessive tension can cause the substrate to stretch. Our company has implemented a tension control drive in the middle to ensure that the film is transported without exceeding a certain load. By minimizing the number of transport rolls and maximizing the spray range without interfering with the spray ejection from the transport rolls, we achieve high spray efficiency. 【Features】 ■ Continuous etching of M-ITO films and ITO films is possible ■ Film transport technology at low tension ■ High spray efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Etching Equipment

Our company is committed to enhancing our customers' credit and sales capabilities by working on awareness reform and strengthening our internal structure within the group, aiming for improved quality and reduced defect rates. We will make company-wide efforts to improve productivity and reduce costs. The Toa Electronics Group's "Suntec Toyo Factory" has obtained certification for the international standard of quality management systems, "ISO 9001," from the certification body "ASR Co., Ltd." We will make company-wide efforts to improve productivity and reduce costs. Additionally, all assembly jigs used on the production line are designed and manufactured in-house. We also produce 3D printers that create complex shapes and small parts, thoroughly pursuing the ease of use of our jigs. Images of assembled products on the production line, captured by automatic optical inspection machines (AOI) and CCD cameras, are automatically compared with pre-stored data of the components. We acquire images regarding the presence or absence of parts, positional deviations, differences in types, and the color and shape of parts, and we have a system in place for determining pass or fail through a centralized management system. *For more details, please refer to the PDF document or feel free to contact us.*

• EMS
• Assembly Jig
• Circuit board design and manufacturing

Some wireless and electronic/electrical devices unintentionally emit electromagnetic waves and electromagnetic energy into their surroundings and power supply, posing a risk of deteriorating the electromagnetic environment. This issue has become a social problem, and the importance of safety measures and electromagnetic compatibility measures is being emphasized. Our "EMC Center" is equipped with various testing facilities to address these issues, conducting investigations into the effects of electromagnetic waves and their causes. We also utilize these measures to prevent our own products from becoming sources of electromagnetic wave emissions, as well as to mitigate external influences. 【Features】 ■ Equipped with various testing facilities for investigating the effects of electromagnetic waves and their causes ■ Utilized to prevent our own products from becoming sources of electromagnetic wave emissions *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing

The "Super Line Tape" is a new type of line tape that has been enhanced by applying a uniquely developed "Ultra-Durable Coating Layer (patented)" to the surface of a durable PET substrate. By applying the "Ultra-Durable Coating Layer," it maintains a smoothness at the nano level, making it resistant to scratches during long-term use. Dirt that adheres can be easily removed with a simple wipe, and it is also resistant to heat (fireproof material certification) and chemicals. Additionally, it features antibacterial and antifungal processing, ensuring excellent hygiene. Due to the reinforcement from the "Ultra-Durable Coating Layer," it can be used for an extended period. The substrate is less prone to stretching, and it has a release paper on the back, making installation easy. It also uses a re-peelable adhesive, resulting in minimal adhesive residue, which contributes to cost reduction. Many customers use it for organizing factory and warehouse sections, as well as for hazard markings such as fire hydrants, and it has received positive feedback for use in station boarding area guidance. It is also ideal for signage in facilities like hospitals and shopping centers.

• Other safety and hygiene products
• Adhesive tape
• Other office supplies

The "SUPER DURABLE FILM" is a new film material that features a uniquely developed "super durable coating layer" on the surface of a PET substrate and a re-peelable adhesive layer on the back. Simply applying it protects the surface of the object and enhances durability. Dirt that adheres can be easily removed with a wipe, and the antibacterial and antifungal treatment ensures excellent hygiene. Its applications are virtually limitless, depending on your ideas, including building materials such as floors and walls, factory and store floors, walls, and ceilings, touch panels and monitor screens, floor signs, and large posters. 【Features】 ■ Scratch-resistant and maintains high gloss ■ Easy to apply and remove ■ Resistant to strong acids and strong alkaline solvents. Excellent chemical resistance ■ UV cut effect prevents discoloration and fading ■ Safe shatterproof and anti-static properties *For more details, please download the catalog or contact us.

• Other polymer materials

Since starting the design of printed circuit boards (PCBs) in 1947, we have accumulated technology over more than half a century to meet your needs. In addition to design and production, we also engage in software development for control programs of gaming machines, as well as content creation such as videos and sounds using the latest 3DCG software, providing high value-added products.

• Processing Contract
• EMS
• Circuit board design and manufacturing