平河ヒューテック Product Lineup

This is an ultra-fine coaxial multi-cable with excellent bending resistance and flexibility. By using alloy wire conductors, it achieves high mechanical strength and bending characteristics. The unique cross-linked foamed polyethylene insulation from Hirakawa Hewtech ensures low capacitance and flexibility, while wrapping PET tape around the insulation provides heat resistance and mechanical strength (CCE product). It is suitable for internal and external wiring of ultrasound diagnostic devices and electronic equipment. For more details, please contact us or refer to the catalog.

This is a notice from Hirakawa Hutech Co., Ltd. regarding "high-frequency transmission coaxial cables with heat-resistant single ends."

By using special alloy wire conductors, we achieve high tensile strength, high conductivity, and excellent mechanical properties. The use of fluororesin for the insulator and outer sheath provides exceptional chemical resistance, flame retardancy, and heat and cold resistance. Compliance with UL standards is possible. It is suitable for internal wiring of PCs, digital appliances, and medical devices. For more details, please contact us or refer to the catalog.

This is an announcement from Hirakawa Hutech Co., Ltd. regarding "heat-resistant single-ended high-frequency transmission coaxial cables."

This is a notice from Hirakawa Hutech Co., Ltd. regarding "high-temperature single-end high-frequency transmission coaxial cables."

This is an announcement from Hirakawa Hutech Co., Ltd. regarding "high-temperature single-ended high-frequency transmission coaxial cables."

This cable complies with JIS C3501, uses polyethylene as the insulator, and features an external conductor in a braided form with polyvinyl chloride resin used as the sheath, making it a high-frequency coaxial cable with a characteristic impedance of 50Ω. It is suitable for connecting high-frequency equipment, internal wiring, and power lines. For more details, please contact us or refer to the catalog.

This cable complies with JIS C3501, uses polyethylene as an insulator, and features a braided external conductor with polyvinyl chloride resin as the sheath, making it a high-frequency coaxial cable with a characteristic impedance of 75Ω. It is suitable for connecting high-frequency equipment, internal wiring, and power supply lines. For more details, please contact us or refer to the catalog.

This code is a high-frequency coaxial cable with a characteristic impedance of 50Ω and 75Ω, based on UL 758, using cross-linked polyethylene as the insulator and a braided external conductor with polyvinyl chloride resin as the sheath. It is suitable for internal wiring of high-frequency equipment. For more details, please contact us or refer to the catalog.

This code is a high-frequency coaxial cable with a characteristic impedance of 50Ω and 75Ω, based on UL 758, using cross-linked polyethylene as the insulator and a braided external conductor with polyvinyl chloride resin as the sheath. It is suitable for internal wiring of high-frequency equipment. For more details, please contact us or refer to the catalog.

It has excellent stability in characteristic impedance and propagation delay time. The porous PTFE insulator allows for a rated temperature range of -55°C to +200°C, which is very impressive. It has excellent attenuation characteristics, achieving -3dB/m at 6GHz in braided shield types. It is suitable for internal wiring of communication devices and electronic equipment, as well as for connections in the test head and interface sections of IC test systems. For more details, please contact us or refer to the catalog.

Our unique high-foaming polyethylene extrusion technology at Hirakawa Hewtech achieves high cost performance. It exhibits excellent stability in characteristic impedance and propagation delay time. The skew within pairs can be less than 8 ps/m (please inquire separately as this depends on the structure). We can accommodate UL standard products. As an environmental measure, halogen-free options are available. We offer four types: centered drain type, side drain type, twisted pair type, and cabled twisted type. These are suitable for internal and external wiring of large computers, IC testers, communication devices, and electronic equipment. For more details, please contact us or refer to our catalog.

In the medical device industry, high-precision signal transmission is required. Especially in precision instruments such as ultrasound diagnostic devices, it is essential to minimize the effects of noise and ensure accurate signal transmission. If the performance of the cable is low, it can lead to image degradation or malfunction. Our high-frequency coaxial cables excel in bend resistance and flexibility, achieving high mechanical strength and bending characteristics. Thanks to our unique cross-linked foamed polyethylene insulation from Hirakawa Hewtech, we achieve low capacitance and flexibility, while ensuring heat resistance and mechanical strength by wrapping PET tape around the insulation (CCE products). 【Application Scenarios】 - Ultrasound diagnostic devices - Internal and external wiring of electronic equipment 【Benefits of Implementation】 - Achieves high-precision signal transmission - Reduces the impact of noise - Improves equipment reliability

The "OSFP RHS 800G Direct Attach Copper Cables" are high-speed copper cables compliant with OSFP MSA Rev5.0 and CMIS Rev5.1. They conform to IEEE 802.3cd 400GBASE-CR4 and utilize high-bandwidth Twinax cable that supports serial transmission. They are also compatible with IBTA NDR and earlier versions. Using 28 AWG cables, they support a maximum rate of 56G Baud. Customization of wire gauge is also possible, achieving low latency, low cost, and high reliability performance. 【Features】 ■ Compliant with OSFP MSA Rev5.0 and CMIS Rev5.1 ■ Compliant with IEEE 802.3cd 400GBASE-CR4 ■ Compatible with IBTA NDR and earlier versions ■ Utilizes 28 AWG cables, supporting a maximum rate of 56G Baud ■ Customization of wire gauge is possible ■ Low latency, low cost, and high reliability performance *For more details, please download the PDF or feel free to contact us.

The "USB3 Vision Type-C Cable" is an interface cable that connects USB3 Vision compliant cameras to PCs and USB hubs. It achieves high-speed transmission with Gen2 (10Gbps) and Gen1 (5Gbps) in accordance with the USB3.2 Power Delivery 3.1 standard. A variety of Type-C connectors are available. It features custom cables specifically for Gen2x1 and Gen1x1, including screw-type and angled types. It is environmentally friendly and complies with RoHS (10 substances). 【Features】 ■ Complies with USB3.2 Power Delivery 3.1 standard ■ Achieves high-speed transmission of Gen2 (10Gbps) and Gen1 (5Gbps) ■ A variety of Type-C connectors available ■ Includes screw-type and angled types ■ Contact components: gold-plated terminal connectors ■ Environmentally friendly: complies with RoHS (10 substances) *For more details, please download the PDF or feel free to contact us.