南出キカイ List of Products and Services

We offer the 'KH type' submersible pump for ultra-high lift applications, specially designed with high-efficiency motors for a total lift of over 60m (4-pole series). The motor features a forced cooling structure (adopting a full waterway method) and can operate at low water levels. The design and materials of the shaft sealing device and various components are considered to withstand high-pressure water, while also simplifying maintenance. Please feel free to contact us if you have any inquiries. 【Product Lineup (Partial)】 ■ KH2-1550-2ED ■ KH-2060-2ED ■ KH-1575-2ED ■ KH-1575-3ED ■ KH-15100-3ED *For more details, please download the PDF or feel free to contact us.

• Other pumps

This product is a single-stage efficiency pump designed for ultra-high lift applications with a total lift of over 60m, and it achieves miniaturization and lightweight design using a two-pole motor. The motor adopts a forced cooling structure with a full waterway design, making it extremely safe. Additionally, the shaft sealing device and the structure and materials of each component are designed to withstand high-pressure water, while also simplifying maintenance. 【Product Lineup (Partial)】 ■KHT-830ED ■KHT-1030ED ■KHT3-1550ED ■KHT2-1560ED ■KHT2-1575ED *For more details, please download the PDF or feel free to contact us.

• Other pumps

We offer the stainless steel corrosion-resistant submersible pump 'CSU type' equipped with a double mechanical seal that excels in corrosion resistance and durability in our company. All wetted parts are made of stainless steel (SCS14, SUS316), providing excellent corrosion resistance against acids, alkalis, and salts. The non-clog impeller (three blades) prevents clogging and entanglement caused by waste and debris. Additionally, the B series with a detachable device allows for easy lifting and installation of the pump above ground without entering the sewage or waste tank and without disconnecting the piping. 【Special Specifications】 ■ Voltage change: 400v, 440v, 380v, 480v, etc. ■ Shape change: with anti-tipping brackets ■ Cable extension: □m ■ High-temperature water specification: Some may not be applicable, please inquire separately. *For more details, please download the PDF or feel free to contact us.

• Other pumps

We offer the stainless steel corrosion-resistant submersible pump "CSE type," which uses stainless steel materials (SCS14, SUS316) for all wetted parts. It exhibits excellent corrosion resistance against acids, alkalis, and salts. The non-clogging impeller (with two blades) prevents clogging and entanglement from waste and debris. Additionally, we have a B type in the series that features a detachable device, enhancing the ease of maintenance and inspection during servicing and repairs. 【Lineup (partial)】 ■CSE-400E ■CSE-400G ■CSE-505E ■CSE-505G ■CSE-51E *For more details, please download the PDF or feel free to contact us.

• Other pumps

We handle the "Asahi Tubular Fan TFD1-ML type" with a soundproof box. It does not cause surging phenomena, allowing for a wide range of specifications to be selected. Additionally, due to its limit load characteristics, it maintains low motor output and high efficiency, resulting in lower noise compared to axial fans. There are three types: direct drive and belt drive. 【Features】 ■ Low-noise fan with TFM type fan or TFD1-M type fan installed in a soundproof box lined with sound-absorbing material (glass wool) ■ Ceiling-mounted type ■ Compact design for easy installation ■ High-performance, high-efficiency inclined flow fan similar to TFM type and TFD1-M type *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

The "Asahi Tubular Fan TFM-LL Type" is a high-performance direct drive axial flow fan for ceiling mounting, utilizing a unique impeller design. We offer two types: direct drive and belt drive. It does not cause surging phenomena, allowing for a wide range of specifications to be selected. Additionally, due to its limit load characteristics, it maintains low motor output while being highly efficient and is quieter compared to axial flow fans. 【Features】 ■ Low noise fan with a TFM type fan or TFD1-M type fan installed in a soundproof box lined with sound-absorbing material (glass wool) ■ Ceiling-mounted type ■ Compact design for easy installation ■ High-performance and high-efficiency axial flow fan similar to TFM type and TFD1-M type *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

The "Small Asahi Tubular Fan TFD1-M Type" is a high-performance, high-efficiency axial flow fan. It is a ceiling-mounted type with a drain outlet and flange. It takes up little installation space and can be installed linearly in the middle of ducts, making it easy to install. It is suitable for duct ventilation in hospitals, restaurants, apartments, schools, and more. 【Lineup】 ■TFD1-30M ■TFD1-35M ■TFD1-45M *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

We offer the high-performance, low-noise type of "Compact Asahi Tubular Fan TFM Model" that uses a tubular fan (axial flow fan). With a compact design, it does not take up installation space and can be installed in narrow ceiling areas, making installation and maintenance easy. It is also suitable as a cooling fan for equipment and can be used in humid places such as bathrooms. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ TFM-15G ■ TFM-20G ■ TFM-25 ■ TFM-28 ■ TFM-28G ■ TFM-30 * For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

We would like to introduce our multi-point level switch, the 'LS-BT/BF model'. The "LS-BT model" can perform ON-OFF control with just one unit within a control range of 1000mm. It is a three-point level switch that comes with a set of three floats for starting, stopping, and high water level alarm. The "LS-BF model" consists of a total of four floats for starting, stopping, simultaneous operation, and high water level alarm. Please feel free to contact us when you need assistance. 【Features】 ■ As a multi-point float switch, it allows for a larger control range by incorporating a balance weight at the tip of the float, enabling starting and stopping with a single float, and improvements against chattering have also been made. * For more details, please download the PDF or feel free to contact us.

• Liquid level control/level switch

The liquid level control level switch "LS type" detects the upper limit (full water detection) and the lower limit (low water detection) of water levels through the opening and closing of a reed switch, and notifies with an electrical signal. The cable uses oil-resistant special flexible vinyl cable, and the tip is treated for complete water drainage. The connection to the functional part is filled with epoxy resin to ensure complete integration with the molded case. The buoyancy material inside the float also serves as shock absorption, providing excellent shock resistance. 【Features】 ■ Can be ON-OFF controlled with one unit within a control range of 200 to 900 mm (LS-S type only) ■ A balance weight is attached to the tip of the float to enhance the accuracy of the operating point, and measures against chattering (rippling) are also implemented (LS-S type only) ■ Resistant to dirt, scum, floating debris, and oil-water, and does not rust *For more details, please download the PDF or feel free to contact us.

• Liquid level control/level switch

We would like to introduce our submersible wastewater pumps, the 'KW2/KW3 models'. The impeller features a semi-open, non-clog type with two blades, which excels in hydraulic balance. Despite its compact size, it is equipped with a shredding function that can handle clogs and entanglements caused by foreign objects and fibers. Please feel free to contact us if you have any inquiries. 【Product Lineup (Excerpt)】 ■KW2-200S ■KW2-250S ■KW2-250-2T ■KW3-53 ■KW3-54 ■KW3-73 *For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce our small resin sewage submersible pump, the 'EP type'. By combining high-performance resin and stainless steel, we have achieved a lightweight and compact design. We have improved the joint surfaces to enhance sealing performance and corrosion resistance. It can be widely used for raw water in combined treatment facilities, flow regulation, sludge return, and discharge. 【Lineup (partial)】 <Non-automatic pump models> ■EP-150S ■EP-150-2T ■EP-250S ■EP-250-2T ■EP-400S *For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce our sewage submersible pumps, the 'KV2/KV3 models'. The gap between the impeller and the suction cover is designed to be wide, allowing for smooth transportation of foreign objects up to the same diameter as the suction inlet, preventing issues such as "clogs" and "entanglements." Additionally, the use of a vortex impeller ensures a non-clogging operation. Please feel free to contact us for inquiries. 【Product Lineup (Partial)】 ■KV2-250S ■KV2-250-2T ■KV2-400S ■KV3-53 ■KV3-54 ■KV3-73 *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "SF2/SF3 type" is a wastewater submersible pump with a cutter that eliminates the issues of "clogging" and "entanglement" caused by solid materials. Equipped with a foreign object cutting mechanism (cutter), it demonstrates excellent functionality as a wastewater submersible pump. It excels in load capacity and durability, capable of handling not only clean water and wastewater but also wastewater that may contain floating debris. 【Product Lineup (Partial)】 ■ SF2-400S ■ SF2-400-2T ■ SF2-12 ■ SF3-34 ■ SF3-54 ■ SF3-74 *For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce our electrode-type automatic driving device integrated sewage submersible pump 'Model A2'. It does not require a float switch, liquid level relay, control panel, priming or foot valve, pump house, or space for ancillary equipment, nor does it require electrical work for automatic control. It ensures reliable automatic control, boasts excellent durability, and demonstrates high reliability as a facility pump. Additionally, it has a wide liquid level adjustment range and allows for easy adjustment. 【Product Lineup】 ■ A2-250SA ■ A2-250-2TA ■ A2-400SA ■ A2-400-2TA ■ A2-750-2TA *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "JII type" is a compact submersible pump for dirty water, characterized by its tough functionality and built-in reliable motor protection device. Its powerful and durable mechanisms, including a unique shaft sealing system, enable excellent wear resistance and long hours of continuous operation, even in muddy water. Additionally, it can easily start without priming, and its quiet operating sound expands its usability in various locations. 【Lineup】 ■ J2-200S ■ J2-250S ■ J2-250-2T ■ J2-400S ■ J2-400-2T ■ J2-750-2T *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "AD2 type" is a compact submersible wastewater pump with a level switch type built-in automatic control device that features an accurate and long-lasting liquid level detection mechanism. It does not require installation foundation work, foot valves, or automation equipment (liquid level detectors, relays, control panels), making installation as simple as just connecting the power supply. Additionally, the control device can be easily adjusted. Please feel free to contact us when you need assistance. 【Lineup】 ■AD2-200S ■AD2-250S ■AD2-250-2T ■AD2-400S ■AD2-400-2T ■AD2-750-2T *For more details, please download the PDF or feel free to contact us.

• Other pumps

The "cabinet heater" is a comfortable heating device designed with consideration for the body, utilizing natural convection. It is easy to install and demonstrates significant heating capacity. You can choose from two different model numbers to find the most suitable product. Additionally, it accommodates small lots, and production can be accepted from just one unit. Please feel free to contact us when you need assistance. 【Standard Specifications】 ■Steam pressure: 0.19 MPa.G or below ■Case: Aipoly in a single color *For more details, please download the PDF or feel free to contact us.

• Heater

- This is an air heating and cooling heat exchanger for duct installation using plate fin tubes as the element. - We manufacture high-quality heat exchangers tailored to specifications through a consistent production system. - We can accommodate small lot orders, starting from just one unit. - Similar to the elofin coil, liquid coils using steam heaters or liquids can be produced. - Special structure heaters can be manufactured (please inquire). - The element has a block-like structure, providing durability against vibrations and other stresses. - The fin shape is straight, resulting in reduced air resistance. * For more details, please refer to the PDF materials or feel free to contact us.

• others

- This is an air heating and cooling heat exchanger designed for duct installation using an air fin tube as the element. - We will adopt and manufacture the optimal structure according to the fluid flowing inside the tube. - We can accommodate small lot orders, with production starting from one unit. - The use of aluminum fins allows for a very compact design. - Special structure heaters can be manufactured (inquiry required). - Designed with a structure specialized for the specified liquid. - Fin pitch and arrangement can be flexibly selected as needed. * For more details, please refer to the PDF materials or feel free to contact us.

• others

- This is a duct-mounted heater using an elo-fin tube as an element. - We manufacture high-quality heaters through our unique design, manufacturing method, and production management system. - We can accommodate small lot orders, with production starting from one unit. - The use of aluminum fins allows for a very compact design. - Special structure heaters can be manufactured (please inquire). - Fin pitch and arrangement can be flexibly selected as needed. * For more details, please refer to the PDF materials or feel free to contact us.

• others

- This is a heat exchanger that increases the surface area by wrapping fins around the pipe surface. - Due to a unique manufacturing method, the fins are wrapped at a very high tension, resulting in good adhesion between the pipe and the fins, which enhances heat transfer efficiency. - There is a high degree of freedom in selecting pipe diameter, fin width, and fin pitch, and we can flexibly accommodate combinations of materials as well as total length and effective length (the length of the section where the fins are wrapped). - We can accommodate small lot sizes and accept orders starting from one unit. * For more details, please refer to the PDF document or feel free to contact us.

• others

- It is a compact and lightweight flexible pump powered by an HVE-type engine. - The engine and the flexible pump can be separated into three parts, making it convenient for storage and transportation, and it is a submersible pump that does not require priming. * For more details, please refer to the PDF document or feel free to contact us.

• others

- You can clean a large area in a short time just by walking while lightly pushing. - Additionally, the dust box is made of ABS material, which is resistant to rust and dirt, making it suitable for a wide range of indoor and outdoor applications, including factories, warehouses, parking lots, construction sites, train stations, and platforms. * For more details, please refer to the PDF document or feel free to contact us.

• others

- This is a commercial blower that can quickly dry work by delivering a small but powerful wind at construction sites and during interior work. - It can change angles to 0/10/20/90 degrees, making it possible to dry vertical surfaces like walls and facilitate three-dimensional air circulation. - Equipped with a telescopic handle and casters, it is easy to move around on-site. * For more details, please refer to the PDF document or feel free to contact us.

• others

- This device uses the power of compressed air to strike the walls of the base surface or hopper with force, removing blockages of powder and granules through the impact force. - The vibration type is an indirect impact type that strikes the base surface. - A heat-resistant version that can be used in high-temperature environments is also available (made to order). - The impact force can be easily adjusted by simply regulating the pressure of the compressed air. * For more details, please refer to the PDF document or feel free to contact us.

• others

- This product generates powerful centrifugal force vibrations by having a steel ball rotate at high speed within the casing using compressed air. - Its simple structure allows for free adjustment of vibration frequency and centrifugal force just by adjusting the air pressure. - Please use it at an ambient temperature of 80°C or lower. - Its compact and lightweight design makes it suitable for use in tight spaces. - To maintain performance, please install a lubricator (oiler). * For more details, please refer to the PDF document or feel free to contact us.

• others

Don't you feel that the cooling water isn't cold enough? It's no wonder, as regular maintenance of cooling towers is essential. Neglecting maintenance can lead to decreased cooling efficiency, resulting in unnecessary increases in electricity costs. This flyer is intended to propose maintenance services to users who are having trouble with their cooling towers. If you have any issues with your cooling tower, please feel free to contact Minamide Kikai. *For more details, please refer to the PDF document or feel free to inquire.

• Cooling system

● We thoroughly implement standardization, mass production, and quality control, ensuring perfect reliability, durability, and compatibility of parts. ● It is efficient and reduces initial and running costs due to low NPSH. ● The main shaft material is made of stainless steel (SUS304). * For more details, please refer to the PDF document or feel free to contact us.

• others

- We thoroughly implement standardization, mass production, and quality control for diameters ranging from φ32 to φ150, ensuring perfect reliability, durability, and compatibility of parts. - It provides efficient, energy-saving operation with abundant water flow. - The shaft sealing section uses a gland packing type as standard. - The main shaft material is made of stainless steel. * For more details, please refer to the PDF document or feel free to contact us.

• others

● Since it is self-priming, a foot valve is unnecessary, and it is very convenient as it can pump water with just one initial filling. ● Designed for process use, it is compact, lightweight, robust, inexpensive, and can accommodate short delivery times. ● It has good self-priming capability and can pump even if a small amount of air temporarily mixes in from the tip of the suction pipe. ● The impeller is of a semi-open type, allowing it to pump some foreign objects. ● The main shaft material is made of stainless steel (SUS304). *For more details, please refer to the PDF document or feel free to contact us.

• others

● We have thoroughly implemented mass production and quality control, so reliability, durability, and compatibility of parts are perfect. ● Since it is self-priming, there is no need for a foot valve, and it is very convenient as it can pump water with just one initial filling. ● It can still pump water even if a small amount of air temporarily mixes in from the tip of the suction pipe. ● The impeller is of a semi-open type, so it can handle a small amount of foreign matter. ● The main shaft material is made of stainless steel. * For more details, please refer to the PDF document or feel free to contact us.

• others

● It is a high-torque type using rare earth magnets. ● Since ceramics are used in the sliding parts, it can be used even under high temperatures and high pressures. ● It has a small installation area and is compact, taking up little space. * For details, please refer to the PDF document or feel free to contact us.

• others

● Small capacity, high lift pump. ● This pump has a speedy self-priming action. ● Maintenance is easy as disassembly and inspection can be done by simply removing the cover. *For details, please refer to the PDF document or feel free to contact us.

• others

●Self-priming cascade pump. ●Ideal for completely draining tanks. ●Air intake from the suction side is not a problem. ●No suction valve is required. ●Can handle the suction of high-temperature liquids. *For details, please refer to the PDF document or feel free to contact us.

• others

● We have mass-produced the industry's first stainless steel pump, thoroughly implementing rational design and quality control, ensuring perfect reliability, durability, and parts compatibility. ● We can offer it at a low cost due to our extensive track record. ● High efficiency and low NPSH reduce initial and running costs. * For more details, please refer to the PDF document or feel free to contact us.

• others

● We can accommodate all needs with a rich variety of options. (There are no changes in external dimensions) ● Compliant with the Japan Industrial Machinery Manufacturers' Association standards (JIMS). ● We offer high-efficiency pumps in both 4-pole and 2-pole configurations, allowing for selection based on application. ● The main shaft material is made of stainless steel (SUS304). ● All bolts are made of stainless steel for easy maintenance. (Excluding shaft coupling bolts and foundation bolts) ● Maintenance is made easy with the adoption of the B.P.O (Back Pull-Out) method, allowing disassembly without removing the piping. * For details, please refer to the PDF document or feel free to contact us.

• others

● We can accommodate all needs with a rich variety of options. (There are no changes in external dimensions). ● Compliant with the Japan Industrial Machinery Manufacturers' Association standards (JIMS). ● We offer high-efficiency pumps in both 4-pole and 2-pole configurations, allowing for selection based on application. ● The main shaft material is made of stainless steel (SUS304). ● All bolts are made of stainless steel for easy maintenance. (Excluding shaft coupling bolts and foundation bolts) ● Maintenance is made easy by adopting the B.P.O method (Back Pull-Out), which allows disassembly without removing piping. * For details, please refer to the PDF document or feel free to contact us.

• others

● Labor-saving maintenance. ● Small installation area due to the vertical axis design. ● Adopts a non-metallic method, eliminating seal parts for easy maintenance. *For details, please refer to the PDF document or feel free to contact us.

• others

- The shaft seal section is eliminated, making it ideal for slurry and solid material transfer. - Since it is a vertical shaft type, it has a small installation footprint and does not take up much space. - The impeller is located below the liquid level, resulting in low noise. - Adopting a liquid metal method allows for flexible length settings under the base. - No priming is required, there is less concern about cavitation, and automatic operation is easy. - The seal-less structure makes maintenance and inspection simple. * For more details, please refer to the PDF document or feel free to contact us.

• others

- The shaft seal section has disappeared, making it ideal for slurry and solid material transfer. - Since it is a vertical shaft type, it has a small installation footprint and does not take up much space. - The impeller is located below the liquid level, resulting in low noise. - With the adoption of a liquid metal method, the length under the frame can be freely set. - No priming is required, there is less concern about cavitation, and automatic operation is easy. - The seal-less structure makes maintenance and inspection simple. *For more details, please refer to the PDF document or feel free to contact us.

• others

● There is no concern about liquid leakage due to foreign object entrapment because there is no suction valve. ● Compared to conventional self-priming pumps, it has a simple structure without a suction valve. ● The dedicated casing and suction pipe and discharge chamber provide excellent suction performance. ● The use of a vortex pump ensures high efficiency and meets a wide range of specifications. ● Maintenance is easy due to the adoption of the B.P.O (Back Pull-Out) method, which allows disassembly without removing the piping. ● It has a smaller installation area and is more economical compared to self-priming tank systems. * For details, please refer to the PDF document or feel free to contact us.

• others

- Self-priming for sludge handling. - Self-priming pump without a suction valve. - Since there is no suction valve, there is no concern about liquid loss due to foreign object entrapment. - The use of stainless steel castings ensures good durability. - The shaft seal section employs a custom seal method, making it compatible with various liquids. - The impeller is made of a durable special semi-open type, making it suitable for sludge liquids. - Although a suction valve is not used, the structure allows for siphon cut-off. - It can also be used as a non-self-priming air lock-less pump. *For more details, please refer to the PDF materials or feel free to contact us.

• others

● Outstanding self-priming performance and high reliability. ● Mass production of the industry's first stainless steel pump. ● A lineup of high-lift specifications with two-pole motors in small, medium, and large sizes. ● With thorough rational design and quality control, reliability, durability, and parts compatibility are perfect. ● This pump has a speedy self-priming action. ● It adopts a semi-open impeller design, allowing for the passage of some solid materials. * For more details, please refer to the PDF document or feel free to contact us.

• others

● Outstanding self-priming performance and high reliability. ● Mass production of the industry's first stainless steel pump. ● A rich lineup including small, medium, and large sizes. ● With thorough rational design and quality control, reliability, durability, and parts compatibility are perfect. ● This pump has a speedy self-priming action. ● It adopts a semi-open impeller design, allowing for the passage of some solid materials. * For more details, please refer to the PDF document or feel free to contact us.

• others