南出キカイ List of Products and Services

- Achieved a lightweight and strong resin pump. - Equipped with a high-gap structure high-spin impeller that excels in flow characteristics and pump performance, making it suitable for the transfer and drainage of wastewater containing debris. *For more details, please refer to the PDF document or feel free to contact us.*

• others

The suction cover's rubber bellows allows for water intake from the side slits even if the bottom strainer becomes clogged. The impeller is made of a special water-resistant urethane rubber, achieving approximately three times the wear resistance of FCD700. Additionally, the impeller has characteristics that minimize performance degradation even when worn. The bottom design for low water levels allows for water intake with just 10mm of water at the pump's base. It can drain even a small amount of water (no priming required). The bottom is integrally molded from synthetic rubber from the pump casing to the stand, preventing damage to the floor and absorbing impacts to the main body. Lightweight materials such as aluminum die-cast, wear-resistant special synthetic rubber, and water-resistant special urethane rubber are used throughout, resulting in a design that is both light and strong. The shape is designed to prevent the pump from tipping over even when turned upside down. Maintenance can be performed on the pump section without removing the impeller using just a 13mm box wrench. *For more details, please refer to the PDF document or feel free to contact us.

• others

It is lightweight and compact. Thanks to the unique seal valve seat and the new swing valve mechanism, water that has been suctioned does not flow back. The unique bottom plate structure allows for drainage down to a minimum water level of 1mm. The bottom plate with synthetic rubber can also be used with FRP tanks. *For details, please refer to the PDF document or feel free to contact us.

• others

The LB type boasts achievements and trust. It features a high-gap structure with a high-speed impeller that is resistant to wear, and even when worn, it has minimal performance degradation. The design minimizes "locking" caused by sand and other materials. The discharge direction can be changed to "up" or "side," preventing hose bending during lateral pulls. The hose coupling can be easily detached by simply loosening the bag nut. By using carefully selected wear-resistant composite materials, we achieved a weight reduction to 9.5 kg and a compact size comparable to A4 paper (0.25 kW, 0.48 kW). The pump unit can be disassembled with just one box wrench, making maintenance easier. *For more details, please refer to the PDF document or feel free to contact us.

• others

- This is a high-grade pump that has become even more resistant to wear due to the adoption of a high-gap structure and high-spin impeller, resulting in fewer "locks" from sand and other debris. - The specification emphasizes wear resistance, durability, and lightweight design, with the aluminum die-cast parts coated in a special synthetic rubber. - The lower part of the pump can be easily disassembled with just one box wrench, making maintenance easier. - Electrode-type automatic model (KTVE type) It can operate automatically simply by connecting the power supply. It prevents dry operation when the water level drops, making it convenient to use even in densely populated residential areas at night. The pump starts when the entire electrode is submerged or when the water level rises to the electrode, and it stops approximately one minute after the water level falls below the electrode and loses conductivity. *For more details, please refer to the PDF document or feel free to contact us.

• others

The passageway for foreign objects is large at 30mm, allowing it to handle liquids containing various foreign substances. The motor has ample capacity and can operate continuously in exposed air, making it suitable for sewage water replacement work. It is equipped with a 0.55kW motor, designed to withstand harsh conditions. The adoption of a high-gap structure and high-speed impeller makes it resistant to sand lock, and the use of high-chromium cast iron ensures reliable wear resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• others

Adopting a strainer structure that is less prone to clogging with soft foreign objects such as dead leaves. Even when dead leaves and similar debris accumulate around the strainer, it is less likely to become clogged, maintaining a stable discharge volume. A wide installation area is secured, ensuring stable operating posture even on soft ground. *For details, please refer to the PDF document or feel free to contact us.*

• others

This is a popular type of spiral casing that particularly considers foreign object passage cross-sections and can withstand harsh environments. Lightweight materials such as aluminum die-cast and water-resistant special urethane rubber are used throughout, resulting in a design that is both light and strong. The adoption of a high-gap structure with high-speed impellers has made it even more resistant to wear, and it has characteristics that minimize performance degradation even after wear. The design has reduced the likelihood of "locking" due to sand and other materials. The motor has ample capacity, allowing for continuous operation in exposed air. Like the LB type, it is designed for easy maintenance. *For more details, please refer to the PDF document or feel free to contact us.*

• others

- Equipped with an improved non-clog impeller, it is suitable for the transport and drainage of wastewater containing debris. - With its limit load characteristics, there is no concern about horsepower overload, ensuring high reliability. * For more details, please refer to the PDF document or feel free to contact us.

• others

- Motor protection device to prevent motor burnout in advance - Water drainage structure to prevent water ingress into the motor - Motor self (forced) cooling structure that allows continuous operation in exposed air - Electrode-type water ingress detector to prevent water from the pump section into the motor in advance - Oil lifter that realizes further longevity of the shaft sealing device (mechanical seal) - Non-clogging impeller suitable for the transfer of wastewater and sewage * For details, please refer to the PDF document or feel free to contact us.

• others

- It has excellent corrosion resistance for the drainage and transfer of liquids containing chemicals. - This is a chemical-specific pump that uses titanium for the wetted metal parts and a special fluorine rubber with excellent chemical resistance for the sealing parts such as gaskets. - We have implemented a system to ensure thoroughness by confirming compatibility between the pump and the handled liquid using a chemical checker (sold separately). * For more details, please refer to the PDF materials or feel free to contact us.

• others

- Titanium is used for all metal parts in contact with the liquid. Titanium has a much stronger surface oxide film than stainless steel, which helps to prevent corrosion even under high chlorine ion concentration conditions, such as in seawater. *For more details, please refer to the PDF document or feel free to contact us.*

• others

- This is the industry's first horizontal submersible pump designed for horizontal installation, allowing for use in shallow water levels and installation in tight spaces. - It is compact and lightweight (6.3 kg), equipped with a convenient handle for portability. - It uses liquid paraffin as the lubricant. - The wetted metal parts are made of titanium. - A removable strainer is included as standard. * For more details, please refer to the PDF document or feel free to contact us.

• others

By installing the horizontal mounting frame (special accessory) with the intermediate suction type, horizontal installation becomes possible. The adoption of a compact motor makes installation in narrow spaces easy. Due to its high-efficiency design, it can pump a large volume of water with low power consumption. Being submersible, it operates quietly and allows for effective use of the above-ground area. You can select a model suitable for your usage conditions from a wide range of power variations. *For details, please refer to the PDF document or feel free to contact us.

• others

The bottom suction type allows water from the lower part of the tank to be pumped out, effectively utilizing the tank's volume. By installing a horizontal mounting frame (special accessory), horizontal installation becomes possible (for the canned motor specification). The NT3 model is specifically designed for large water volume specifications. Thanks to the adoption of a compact motor, installation in narrow spaces is also easy. With its high-efficiency design, it can pump a large volume of water with low power consumption. Being submersible, it operates quietly and allows for effective use of the above-ground space. You can select a model suitable for your usage conditions from a wide range of power variations. *For details, please refer to the PDF materials or feel free to contact us.

• others

The canned submersible motor uses materials with excellent insulation thermal conductivity and heat resistance for the stator, while the waterproof insulated submersible motor employs high-quality waterproof and heat-resistant wires, ensuring high reliability. Since the pump and motor are installed submerged in a pit, noise and vibration are reduced. Additionally, the floor surface above the pit can be utilized effectively. We have achieved high efficiency through a unique design of the impeller and casing that pursues an ideal water flow. *For more details, please refer to the PDF document or feel free to contact us.*

• others

- The original development jet injector (suction mechanism) consistently sucks in "floating objects," "water," "air," "bubbles," etc., efficiently recovering them without inhaling excess surface water. - The suction inlet can be freely adjusted from 0 to 60mm by adjusting the position of the float, maintaining a constant relationship between the water surface and the suction inlet even when the water level fluctuates. - The underwater pump section is equipped with a non-clogging impeller design, allowing for the efficient transport of foreign objects. *For more details, please refer to the PDF document or feel free to contact us.

• others

The spiral-type pump shape allows for good passage of soil and sludge, and efficiently stirs and discharges using the mixing blades provided at the bottom of the impeller. The motor has a forced cooling structure, enabling continuous operation exposed to air. *For more details, please refer to the PDF document or feel free to contact us.*

• others

A high-torque multipole motor (6 to 10 poles) is used, and the impeller and powerful mixing blades have very little wear due to low-speed rotation, making them economical. The suction plate is made of special steel, offering high durability and suitability for dredging operations. *For more details, please refer to the PDF document or feel free to contact us.*

• others

The spiral-shaped pump design allows for good passage of soil and sludge, and efficiently stirs and discharges using a powerful mixing blade installed at the bottom of the impeller. The motor has a forced cooling structure, enabling continuous operation even when exposed to air. *For more details, please refer to the PDF document or feel free to contact us.*

• others

Adopts a two-pole motor for sewage. Integrates a super-hard blade with a non-clogging impeller and employs a "cutting mechanism" that combines a saw-toothed suction cover surface, enabling the shredding and transport of fibrous foreign materials. *For details, please refer to the PDF document or feel free to contact us.

• others

It features excellent gas-liquid contact and boasts high oxygen transfer efficiency with low power consumption, making it energy-efficient. Due to the underwater agitation, it produces minimal splashing, odor, and noise, ensuring a hygienic and quiet operation. By simply adjusting the airflow, the oxygen transfer rate can be regulated, allowing for easy adaptation to fluctuations in load capacity. It is also suitable for agitation in anoxic tanks and anaerobic processes. *For more details, please refer to the PDF document or feel free to contact us.*

• others

- Achieves a lightweight and strong resin pump. - Equipped with a high-performance closed impeller, it provides a high lift within this class. * For more details, please refer to the PDF document or feel free to contact us.

• others

- In particular, the H type achieves a high lift within this class. - It is compact and lightweight due to being a 2-pole motor, making it easy to handle. * For more details, please refer to the PDF document or feel free to contact us.

• others

- This is a certified product of explosion-proof structure electrical machinery and equipment. It can be used in areas with a risk of explosion. - The impeller is made of sintered alloy and high-chromium cast iron. * For more details, please refer to the PDF document or feel free to contact us.

• others

Stainless steel, which is resistant to rust and corrosion, is used for the main contact parts such as the pump and motor sections. This prevents the occurrence of red water and allows for compatibility with a wide range of water qualities. The design of the impeller and guide vanes adopts hydrodynamically appropriate three-dimensional curved surfaces. High precision and homogeneous pressing processes achieve high fluid efficiency, resulting in energy savings and high performance. The seal ring features a sand-proof design that prevents wear and galling. It is structured to allow sand to escape from the sealing area, preventing locking due to sand intrusion. Streamlined production lines enable bulk mass production of parts, and our excellent stainless steel pressing technology allows us to offer high-quality products at affordable prices. For models with a well diameter of 100mm, we also provide specifications that accommodate PVC VP pipe well casings with a narrower cable guard. We offer a rich variety of power options from low to high lift, allowing you to choose a model suitable for your usage conditions. *For more details, please refer to the PDF materials or feel free to contact us.

• others

This is a simple control panel for automatic operation used for pumps with an output of 2.2 kW or less. A Tsurumi Manufacturing Co., Ltd. float switch (RF, MF, MC type) is used for liquid level detection. *For details, please refer to the PDF document or feel free to contact us.

• others

This is a liquid-sealed vacuum pump that uses sealing liquid as a piston, eliminating the need for lubricating oil, resulting in low noise and environmentally friendly operation. The removal of the conventional coupling section has significantly reduced weight and size. O-rings and gaskets are used in the sealing area, improving maintainability. A ball valve mechanism is incorporated in part of the discharge port, ensuring stable operation even in high vacuum conditions. The motor output ranges from 0.4 to 5.5 kW. There is also a packaged version (VDP type) that features a common base for the main unit and a supply tank for the sealing liquid. *For more details, please refer to the PDF document or feel free to contact us.

• others

- Abnormal water level in the tank will be indicated by an alarm (buzzer and lamp). - It is used in conjunction with our liquid level detection float switch (A contact) that detects the alarm water level. - For non-automatic pumps, it can be used in combination with control panels of types S, K, ZE2, and ZEW2. - Even if the buzzer is turned off by the switch, the lighting of the alarm lamp allows for easy detection of abnormal water levels, making it a user-friendly design. * For more details, please refer to the PDF document or feel free to contact us.

• others

- It has an easy-to-hold handle with a shape that naturally fits in your hand. - The body is made of lightweight and durable plastic, making it easy to care for. - It can also be used as a washing pump to transfer bath water to the washing machine. * For more details, please refer to the PDF document or feel free to contact us.

• others

- A short cleaning time of 40 seconds per unit (including waiting time) is possible. - The tires are rotated on the roll, and dirt in the gaps of double tires is removed by spraying from both sides and the bottom. - A ratchet brake is used for the roll lock, allowing for smooth vehicle exit after cleaning. *For more details, please refer to the PDF document or feel free to contact us.

• others

A single float detects the upper and lower water levels. The snap-action ON-OFF operation works even with clean water, wastewater, or liquids mixed with floating debris and oils. It comes with a cable clamp that allows for easy adjustment of the hanging length. It uses oil-resistant and chlorine-resistant cables. *For more details, please refer to the PDF document or feel free to contact us.

• others

It is a small float structure. There are two types: one for contact A and one for contact B. It is suitable for alarm floats for flooding or drought. When connecting to an automatic control panel for automatic operation of the pump, two of these floats are used. It uses oil-resistant and chlorine-resistant cables. In particular, the MF-HT type is designed for high-temperature water applications with a heat resistance of 80°C, making it suitable for situations involving high-temperature water such as boiler drainage and food or refining factories. *For more details, please refer to the PDF document or feel free to contact us.

• others

It is a simple spherical structure with a bumper attached around the float. It has a robust design that can withstand impacts against piping and tank walls. It can be used in wastewater with a lot of scum and operates without issues with floating debris. It employs a switch with ample electrical characteristics, eliminating concerns about electrical troubles. When connecting to an automatic control panel for automatic pump operation, two of these floats are used. You can choose between contact A and contact B as desired. *For more details, please refer to the PDF document or feel free to contact us.

• others

- The liquid-contact metal parts are made of rust-resistant stainless steel. - The low water level design allows for a minimum starting water level of 15mm and a continuous operating water level of 5mm. * For more details, please refer to the PDF document or feel free to contact us.

• others

- Addressing the need to avoid rust. - Approximately 15% weight reduction due to model change. - Reduced burden for carrying. *For details, please refer to the PDF document or feel free to contact us.

• others

- The main liquid contact parts are made of stainless steel plates, preventing the occurrence of red water from the pump materials. - The adoption of a pressed structure using stainless steel plates makes it compact and lightweight. - The specially developed canned motor for NTS uses a high-cand resin with excellent insulation, thermal conductivity, and heat resistance in the stator, demonstrating high reliability. - The pump and motor are installed submerged in the pit, reducing noise and vibration. Additionally, the floor surface above the pit can be effectively utilized. * For more details, please refer to the PDF document or feel free to contact us.

• others

All parts in contact with the liquid are made of stainless steel (SCS14, SUS316). *For details, please refer to the PDF document or feel free to contact us.

• others

The adoption of the Tsuruumi original high-spin type impeller makes it resistant to wear and has a structure that is less prone to "locking" due to sand and mud. The new siphon breaker mechanism with a check valve prevents backflow of pumped water and water leakage due to siphoning when the pump is stopped. The use of aluminum die-cast and synthetic rubber for major components has achieved weight reduction. It comes with hoses equipped with easy-to-connect fittings on both sides (suction side and pump side). By covering the bottom plate with synthetic rubber, it absorbs shocks to the main body and prevents scratches on the floor. The convex bottom shape allows for easy removal with a plastic hammer during maintenance. It features an electrode-type automatic model (LSPE type). (A) It can operate automatically just by connecting the power supply. (B) It adopts a completely new control method to prevent noise caused by continuous dry operation. The automatic operation method combines a "high-sensitivity electrode" for liquid level detection and a "timer function" to prevent malfunction due to ripples, making it particularly effective for use in densely populated residential areas at night. The operation starts when the water level rises and the electrode touches the water, and then stops after approximately one minute of operation when the water level drops and the water surface moves away from the electrode. *For details, please refer to the PDF document or feel free to contact us.

• others

- A motor-driven series suitable for workability in underground construction sites and indoor operations. - All models are mobile and you can select the appropriate model based on usage conditions from a wide variety of options. - The tank-equipped type comes with a water supply tank that excels in corrosion resistance and durability. - The high-rise water supply and drainage type (HPJ-550/780TW) smoothly supplies water to upper floors with high-pressure water flow. By attaching a junction valve (special accessory), it can be used for both drainage and cleaning purposes. - The basic type offers a wide range of popular models that pursue functionality, simplicity, and operability. * For more details, please refer to the PDF document or feel free to contact us.

• others

Powerful hot water jet. The temperature can be adjusted from 30°C to 80°C using the temperature control dial. It is effective in a wide range of industries, including washing containers for food and fresh produce, as well as cleaning machines and parts in various factories (can also be used for hot water supply). Lightweight and compact for ease of use, it features large φ150 wheels for smooth mobility. (HPJ-55HC2 has φ100 wheels, HPJ-110HC has φ125 wheels, and HPJ-5HE has φ125 front wheels and φ200 rear wheels.) The front centralized control panel makes operation easy, and the inspection area is immediately visible when the inspection door is opened, facilitating maintenance. A hot water faucet is standard equipment (except for HPJ-55HC2 and HPJ-110HC). *For more details, please refer to the PDF document or feel free to contact us.

• others

An engine series that excels in workability in urban areas. Since it does not require a power source, it can perform effectively in any location. The belt-type is a popular model equipped with a hose reel for all types. The direct connection type is a compact, high-pressure washing model that pursues functionality, simplicity, and operability. The soundproof type is a high-grade soundproof model that excels in quietness for work in urban areas and densely populated residential areas. *For more details, please refer to the PDF document or feel free to contact us.

• others

An engine series that excels in workability in urban areas. Since it does not require a power source, it performs effectively in any location. The belt-type is a popular model equipped with a hose reel. (Excluding HPJ-15350E and HPJ-20500E) The direct connection type is a compact, small high-pressure washing model that pursues functionality, simplicity, and operability. The soundproof type is a high-grade soundproof model that excels in quietness for work in urban and densely populated residential areas. The Raxel series comes standard with a self-starter, making engine starting easy. There is also a type equipped with a lithium-ion battery built-in self-starter engine. (Only HPJ-0725ES) *For details, please refer to the PDF materials or feel free to contact us.

• others

An engine series that excels in workability in urban areas. Since it does not require a power source, it can perform effectively in any location. The belt-type is a popular model equipped with a hose reel. (Excluding HPJ-15350E and HPJ-20500E) The direct connection type is a compact, small high-pressure washing model that pursues functionality, simplicity, and operability. The soundproof type is a high-grade soundproof model that excels in quietness for work in urban and densely populated residential areas. The Raxel series comes standard with a self-starter, making engine starting easy. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The unique self-priming design excels in self-priming performance. The adoption of an open-type impeller also enhances drainage capacity, durability, and wear resistance. The pump body is made of aluminum alloy and features a direct connection type with the engine, achieving lightweight and compact design for easy movement and portability. Equipped with a high-performance small engine, it can be used for continuous operation and in harsh conditions. The TED model, with its special steel impeller, easily discharges muddy water and solid sludge, demonstrating excellent wear resistance and maintaining a long lifespan. *For more details, please refer to the PDF document or feel free to contact us.*

• others