アイム List of Products and Services

From September 4 (Wednesday) to September 6 (Friday), 2024, we will be exhibiting at NEPCON Japan held at Makuhari Messe, where we will unveil the X-Separ for the first time. Please be sure to visit the Ehime Prefecture booth in Hall 3, 7-56, and take a look at our new products. We sincerely look forward to your visit.

• plastic

"RC Film" is a food release film that prevents the adhesion of liquids and solids. It leaves no residue from foods such as whipped cream, chocolate sauce, and castella, ensuring easy release. We offer two types: "Water-Repellent and Oil-Repellent RC" and "Water-Repellent RC." 【Specifications】 <Water-Repellent and Oil-Repellent RC / Water-Repellent RC> ■ Water contact angle (°): 145/139 ■ Oleic acid contact angle (°): 115/- ■ PFAS: Applicable/Not applicable ■ Heat sealability: No/Yes ■ Food Sanitation Act: ○/○ *For more details, please refer to the PDF document or feel free to contact us.

• plastic

"Aish" is a freshness-preserving film developed using Aimu's unique technology, which specializes in functional coating technology for films. It helps maintain the freshness of fruits by adsorbing ethylene gas, which significantly affects fruit freshness, and by providing anti-fungal properties. We can also develop films tailored to specific varieties, so companies interested in preserving the freshness of fruits such as strawberries, grapes, peaches, and lemons are encouraged to contact us. 【Features】 ■ Suppresses the accumulation of ethylene gas ■ Provides anti-fungal effects ■ By combining multiple functions, it is possible to develop original packaging materials. *For more details, please download the catalog or feel free to contact us.

• plastic

We offer a wide range of non-silicone release films, and we are pleased to introduce two new products that we have developed. The newly developed "S1" and "S2," which have been added to our lineup, are composed of completely non-silicone materials and have achieved a light release of less than 100 mN/25 mm in the Nitto 31B tape measurement. Additionally, using light release films can often lead to issues with repelling, which may cause problems during subsequent coating processes. However, S1 and S2 successfully maintain a low contact angle while being light release. If you are facing challenges, particularly with resin casting applications such as epoxy, we encourage you to give them a try. We also offer wide-width options up to 2,250 mm, as well as combinations with coating mats and antistatic features. For functional coatings, please leave it to our specialized manufacturers. 【Features of S1 and S2】 ■ Achieves light release while being completely non-silicone ■ Maintains low contact angle despite being light release = good coating suitability ■ Minimal release variation even with high-speed peeling, making it easy to use *For more details, please refer to the PDF materials or feel free to contact us.

• plastic

"Aish" is a freshness-preserving film that extends the freshness of food by adding functions such as antioxidant and anti-fungal properties through its unique coating technology. We conducted verification regarding the freshness preservation effects on representative grape varieties such as "Shine Muscat," "Fuji Maru," and "Pione," focusing on appearance changes like damage, discoloration, and berry drop, as well as weight changes. 【Details】 Coating substrates: PET, PP, PE, PS Added functions: Antioxidant, anti-fungal, oxygen control, anti-fogging *For more details, please download the catalog or feel free to contact the FC Development Department.

• plastic

A new 'SW' type has been added to the IM Release Film (R) (non-silicone type). It has received particularly positive feedback for use in resin casting, and we encourage you to evaluate it when selecting non-silicone release films. 【Features】 ■ Available in three types of release strength: 400mN, 800mN, and 5000mN/25mm ■ Completely silicone-free ■ Developed with cost efficiency as a non-silicone type ◎ For more details, please refer to the catalog. ◎ For inquiries, feel free to contact us by phone or through the inquiry form.

• plastic
• EMC countermeasure products

We have published a collection of evaluation data (evidence) regarding the "Freshness Preservation Film I-SCH." We aim to further assist in solving various challenges, such as reducing food waste and addressing labor shortages through improved work efficiency. We invite you to take a look at the evaluation data and feel free to contact us. [Contents Included] 1. Lemons 2. Bread and Confectionery 3. Citrus (Kanpei) 4. Strawberries 5. Grapes 6. Rust Prevention Effect *For more details, please download the catalog or feel free to contact us.

• plastic

This time, with the cooperation of the bakery, we evaluated (1) bags treated with antioxidants, (2) packaging bags "Aishu" treated with both antioxidants and anti-mold treatment, and (3) bread using oxygen absorbers. The results showed that the bread packaged in (2) "Aishu" did not develop mold even after 164 days, demonstrating an anti-mold effect equivalent to that of oxygen absorbers. By using "Aishu" instead of oxygen absorbers, we can reduce costs and labor during the packaging process. 【Features】 - Cost reduction from the reduction of oxygen absorbers - Reduction of labor for inserting oxygen absorbers - Prevention of accidental ingestion by consumers *For more details, please download the catalog or feel free to contact the FC Development Department.

• plastic

We have developed a new liquid-repellent coating product. We are currently sharing a comparison video demonstrating the effects of ketchup and chocolate dropped on a film without any coating and a film with a liquid-repellent coating. *If you are interested, please check the video below for more details. As issues related to food packaging, the expansion of voluntary standards for capacity labeling in cosmetics, and the concept of 'medication adherence' in the pharmaceutical packaging sector become more prevalent, if you have any concerns regarding packaging, please feel free to contact our FC Development Department. *The effectiveness of the liquid-repellent coating varies depending on the object. *You can view the video and PDF below.

• plastic

We have developed a film suitable for preserving the freshness of strawberries by combining the added functions of "antioxidant function" and "mold prevention function" of the freshness-preserving film "Aish." To demonstrate its effectiveness, we will publish: 1. Observations of mold occurrence during room temperature storage 2. Observations of discoloration and damage during refrigerated storage 3. Weight change data after three weeks of refrigerated storage *For more details, please download the catalog or feel free to contact the FC Development Department.

• plastic

We have developed a film suitable for preserving the freshness of lemons by combining the additional functions of the freshness-preserving film "Aishu," namely "antioxidant function" and "mold prevention function." To demonstrate its effectiveness, we will share: 1. Photos showing changes after 4 months of refrigerated storage 2. Photos of withered stems after 16 days at room temperature 3. Data on weight changes after 16 days at room temperature *For more details, please feel free to download the catalog or contact the FC Development Department.

• plastic

We have newly developed the 'T Spec' that suppresses delamination changes against repeated delamination loads. By repeatedly using the delamination film, which was previously discarded after a single use in the manufacturing process, there is potential for cost reduction. [Applications] - Sheet molding process for ceramic materials - Film production process for resin films, etc. *For more details, please download the PDF or feel free to contact us.

• plastic
• others

Our company, a specialized manufacturer of functional coating films, produces release films for pharmaceutical patches. We optimize the release design for multiple active ingredients and complete the design printing on the back. 【Features】 ■ Optimization of release function and printing characteristics ■ Manufactured in a factory certified with ISO9001 and ISO14001 ■ Capable of producing substrate thickness, release strength, color tone, and design according to your requirements 【Applications】 Patches (plasters), adhesive medications, systemic medications, etc. *For more details, please download the PDF or feel free to contact us.

• plastic
• others

A new specification with excellent release strength and chemical resistance has been added to Aime's release film (R). By adding a primer layer between the release treatment layer and the PET substrate, we have improved the adhesion rate between the substrate and the silicone layer while maintaining the performance of the conventional release layer. 【Features】 ■ Improved chemical resistance ■ Release strength can be adjusted according to requirements from light to heavy release ■ Printing of text on the back of the release layer is also possible 【Applications】 Adhesive sheets (wet sheets), adhesive medications, whole-body medications, etc. *For more details, please download the PDF or feel free to contact us.

• plastic
• others

Our "Heat-Resistant Functional Film" is a high-performance film that addresses the challenges of PET substrates that arise during heat load processes (such as dimensional changes, deformation, heat wrinkles, whitening due to oligomer precipitation, and process contamination). If you are experiencing issues with sheet casting processes or the dimensional stability of heat-resistant carrier films, please feel free to contact us. 【Features】 ■ By using annealing processing, it alleviates the transfer of heat wrinkles from the process film to the product, helping to suppress yield loss. ■ By coating an oligomer precipitation prevention layer, it is possible to prevent whitening of the product. ■ When used as a lead film in the sputtering process, it helps to suppress line contamination. ■ The release function can be selected from silicone-based or non-silicone-based options according to customer requirements. *For more details, please refer to the PDF document or feel free to contact us.

• others

We will help keep your surroundings clean with our proposals for wet and dry sheet products and assist with product displays. We can manufacture cleaning sheets from thick to thin, so we can suggest cleaning sheets tailored to your needs. We select products to address various challenges, such as disinfectants and orange oil solutions effective against grease stains. Additionally, we can propose individually packaged items like eyeglass wipes and various pocket-type options.

• Office supplies and stationery

Certified by the Japan Hygiene Materials Industry Association, our 'oshibori' offers peace of mind and safety. We offer a variety of materials, including strong non-woven fabrics and embossed options for added volume. The horizontal seal design prevents drying out and ensures long-lasting use. Additionally, our compact oshibori is neatly aligned, making it easy to store without taking up much space.

• Other office supplies

The "Release Film FE Type" is a release film developed for electronic applications that are sensitive to silicone, made from fluorosilicone (non-silicone type). Compared to conventional products (FB type), the release performance has been improved. You can choose from double-sided release type, anti-static type, and low thermal shrinkage type. It also features excellent solvent resistance and stable release performance. 【Features】 ■ Compatible with a wide width of 2,250mm ■ Coating possible in high-clean environments ■ High solvent resistance and stable release performance *For more details, please download the PDF or feel free to contact us.

• plastic
• Printed Circuit Board

"Aish" is a freshness-preserving film developed using I’m's unique technology, which specializes in functional coating technology for films. By adsorbing ethylene gas, which significantly affects the freshness of fruits, and providing anti-fungal properties, it helps to maintain the freshness of fruits for a longer period. We can also accommodate film development for specific varieties, so companies interested in preserving the freshness of fruits such as apples, strawberries, and peaches are encouraged to contact us. 【Features】 ■ Suppresses the accumulation of ethylene gas ■ Provides anti-fungal effects ■ By combining multiple functions, it is possible to develop original packaging materials. *For more details, please download the catalog or feel free to contact us.

• plastic

"Ish" is a freshness-preserving film developed using Aime's unique technology, which specializes in functional coating technology for films. By providing and controlling low oxygen levels and anti-fog properties, it helps to keep vegetables fresh for a longer time. We can also accommodate film development for specific varieties, so companies interested in preserving the freshness of vegetables such as cabbage and tomatoes are encouraged to contact us. 【Features】 ■ Oxygen concentration can be controlled for each type of vegetable ■ Effective for preserving the freshness of cut vegetables as well ■ By combining multiple functions, it is possible to develop original packaging materials. *For more details, please download the catalog or feel free to contact us.

• plastic

I'm Release Film® (polyethylene (PE) substrate type) is a silicone release film (separator) that allows for the selection of substrates such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE) according to the customer's application and process, with the option to specify the release grade. It is also possible to apply release and antistatic coatings not only to stretchable PE and CPP but also to PET substrates with a thickness of just 6μm.

• plastic
• Touch Panel
• Other electronic parts

We have recently started the development of functional packaging that prolongs the freshness of fruits and vegetables through low oxygen levels and anti-fogging properties. While responding to the needs and requests of numerous users, we aim to further increase the product grades. Companies interested in maintaining the freshness of food are encouraged to feel free to contact our development team. 【Features】 ■ Achieves low oxygen levels with our unique special technology ■ Dramatically extends the freshness of fruits and vegetables with high-performance anti-fogging properties 【Examples of Use】 Packaging bags that maintain the freshness of fruits and vegetables such as lettuce and broccoli through low oxygen levels and anti-fogging properties. *For more details, please download the catalog or feel free to contact us.

• plastic

Comprehensive Guide to Functional Film Categories

• plastic
• Touch Panel
• Prototype Services

At Aimu, we respond to our customers' needs and create new value through release (peeling) processing technology, low thermal shrinkage (annealing) processing technology, and the addition of functional features (such as anti-static, etc.).

• plastic
• Touch Panel
• Other electronic parts

I'm Release Film® (Silicone Type) is a silicone release film (separator) that allows for the selection of suitable base materials and release grades according to the customer's applications and processes.

• plastic
• Touch Panel

The "Release Film FE Type" is a release film developed for electronic device applications that dislike silicone, made from fluorosilicone (non-silicone type). Compared to conventional products (FB type), the release performance has been improved. You can choose from double-sided release type, anti-static type, and low thermal shrinkage type. It features excellent solvent resistance and stable release performance. 【Features】 ■ Supports a wide width of 2,250mm ■ Can be coated in high-clean environments ■ High solvent resistance and stable release performance ■ Achieves low cost and light release *This product is under development. Please refer to the materials for more details. ★ We will give away a sample set of fluorosilicone (FB) and non-silicone separator (SP, A, SN) for free to 20 companies selected by lottery. Please check the document "Sample Set Giveaway Information" for the contents of the set. (No download required / available for browsing) <If you would like a sample, please apply through the [Contact Us] section below.>

• plastic
• Printed Circuit Board

"Anil Film" is a PET film suitable for precision devices such as touch panels, which prevents thermal shrinkage and can also control the shrinkage rate. It suppresses variations in dimensions and curling of the film, contributing to improved product quality and yield. 【Features】 ■ The film is available in ultra-low shrinkage to medium shrinkage types, allowing for adjustable shrinkage rates. ■ An oligomer barrier coat layer is formed on the surface to prevent contamination and other issues. ■ Compatible with wide widths (up to 2250 mm). ■ Functional coatings such as release, anti-static, and hard coatings are also available. *For more details, please download the catalog or contact us.

• plastic
• Touch Panel
• Other electronic parts

I'm Oligomer Barrier Film is a low-shrink film that provides a barrier to oligomers (low molecular weight substances) that precipitate due to thermal stress on the film. It is mainly used in films for displays and touch panels, as well as in products that undergo thermal stress in later processes.

• plastic
• Touch Panel
• Other electronic parts

The "Coating Matte Film" is a matte (non-glossy) film manufactured in a clean environment (Class 100). It has excellent slip properties and effectively prevents blocking of smooth film products. By controlling the gloss level (glossiness), it enhances visibility and distinguishability, thereby achieving quality improvement for our customers. *For more details, please download the catalog or contact us.*

• plastic
• Inductor Coil

Are you troubled by processing issues caused by static electricity on films? Aime's "Static Electricity Prevention Film" is a functional film that suppresses static electricity during peeling and while transporting rolls. 【Features】 ● In addition to controlling surface resistivity of 4 to 10 log Ω/□, we offer types with improved heat resistance, solvent resistance, and alcohol resistance. ● Prevents the adhesion of dust and foreign substances by preventing static electricity on the film. ● Prevents peeling defects caused by spark marks due to static electricity. ● Can provide static prevention functions suitable for various PET films according to application and required quality. ● Can impart static prevention functions to the base layer of the release layer, preventing static electricity issues during peeling. ● Supports wide widths (up to 2250mm). ● Can be combined with release coatings and annealing processes. *For details, please download the catalog and contact us.

• plastic
• Other electronic parts
• Touch Panel

1. We will select the resin according to the materials used for the substrate and the easy-to-bond surfaces. 2. It is possible to design with consideration for the processing load in the customer's manufacturing process. 3. Combinations with other coatings and annealing are also possible.

• plastic
• Composite Materials

We have recently begun the development of functional packaging that extends the freshness of fruits and vegetables through the application and control of low oxygen and anti-fog properties. While responding to the needs and requests of numerous users, we aim to further increase the product grades. Companies interested in maintaining food freshness are encouraged to feel free to contact our development team.

• plastic

A new EX type has been added to the IM Release Film (R) (silicone type). It features an ultra-light release strength of 14 mN/25 mm while maintaining a residual adhesion rate of over 95%. Additionally, it can be coated on a wide range of easy-adhesion layers, ensuring good adhesion. Even in configurations where printing processing is done on the back, it is unlikely to cause printing defects, allowing for safe use. If you are experiencing issues with decreased adhesion due to silicone transfer or printing defects, please consider evaluating it. Currently, we are only introducing the ultra-light release grade, but we plan to gradually add more options for release strength. *For more details, please download the PDF or contact us.*

• plastic

I'm Release Film (R) (non-silicone type) is a release film (separator) that can be used for bonding with silicone adhesives and for electronic material carrier films that do not favor silicone.

• plastic
• Printed Circuit Board
• EMC countermeasure products

I'm Release Film® (Color Type) is a release film (separator) that enhances visibility through Aime's unique coloring coating technology.

• plastic
• Touch Panel
• Other electronic parts

I'm Release Film® (Design Coat Type) is a release film (separator) that features silicone partially coated on specific areas such as zones, patterns, and lines, using I’m's unique coating technology, and is printed with logos in text or designs.

• plastic

I'm Release Film® (polypropylene (PE) substrate type) is a silicone release film (separator) that allows you to select a suitable substrate, such as transparent and sturdy OPP (oriented polypropylene) film or soft and durable CPP (cast polypropylene) film, according to your application and process, with the option to choose the release grade.

• plastic
• Touch Panel
• Other electronic parts

This is an air conditioning air purification replacement filter. It's the perfect product for customers who are concerned about the dirt in the air conditioning and want the peace of mind that comes with a dedicated type!

• Other cleaning tools
• Other office supplies
• Other consumables

I'm Release Film® (polyethylene (PE) substrate type) is a silicone release film (separator) that can be customized according to your applications and processes, allowing for the selection of substrates such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE), as well as specifying the release grade.

• plastic
• Touch Panel
• Other electronic parts

I'm Release Film® (super heavy release type) is a silicone release film (separator) that is optimal for casting, with excellent balance between coating properties and release properties.

• plastic
• Other electronic parts
• Touch Panel

By adopting UV curing methods, we can perform release treatment not only on PET substrates but also on substrates with low heat resistance. We can also accommodate OPP release films and PE release films. Additionally, we offer industry-leading wide release films for PET, with widths up to 2250 mm. For more details, please download the catalog or contact us.

• plastic
• Other electronic parts
• Touch Panel

By adopting UV curing methods, there is almost no degradation in peeling performance due to atmospheric exposure. Additionally, by using UV curing methods, it is possible to form silicone coated surfaces with almost no defects such as uneven curing by instantly curing the silicone coating film. For more details, please download the catalog or contact us.

• plastic
• Other electronic parts
• Touch Panel

By using UV curing methods, we can control the amount of ultraviolet exposure and optimize the curing state of the silicone coating. We can also propose types that improve adhesion to the substrate film. With this unique technology, it is possible to reduce the risk of contamination caused by silicone transfer. ● For more details, please download the catalog or contact us.

• plastic
• Other electronic parts
• Touch Panel

I'm Release Film® can be processed into release films with a maximum width of 2250 mm using industry-leading wide clean coaters. Additionally, through rigorous clean management, we achieve a Class 100 environment in the head area, allowing us to provide wide clean release films suitable for the optical field and electronic components-related fields.

• Other electronic parts
• Touch Panel
• plastic

I'm Release Film® can also accommodate release treatment on both sides. Additionally, leveraging the characteristics of UV curing, it allows for the individual setting of release strength on the front and back, resulting in a stable quality differential release type silicone release film (separator).

• plastic
• Other electronic parts
• Touch Panel