VISTA List of Products and Services

◎ No need for expensive helium gas, which may become scarce - Leak tests can be conducted using argon gas or atmospheric nitrogen ◎ Reduction and simplification of inspection time is possible - Testing can be performed in low vacuum areas (approximately 50 Pa) - Fast gas release allows for shorter inspection cycles - Changing the search gas is one-touch ⇒ After confirming the presence or absence of leaks and the total leak amount using atmospheric nitrogen, it can be switched to argon mode to identify leak locations ◎ No advanced skills required - Reliable leak detection is possible as there is no absorption or permeation into elastomers ◎ Accurate quantification of leak amounts is possible - Achieves leak standards using standard conductance elements with atmospheric air (nitrogen) - Conversion from air calibration values to argon gas, etc., is possible - Compared to the submerged method, it allows for easy and quick accurate quantification

• Vacuum Equipment
• Other inspection equipment and devices

The Smart Vacuum Gauge (S Gauge) SC-22 is an automatic vacuum gauge developed by our company that can measure both residual gas components and total pressure (vacuum level) using a new method. It can perform gas component measurement leak checks even in rough vacuum conditions where RGA (Q mass) does not function. Since it is based on a cold cathode gauge, it can be used in tough environments without a filament. The total pressure is measured with a built-in wide-range vacuum gauge, capable of measuring vacuum from atmospheric pressure to ultra-high vacuum. Measurement of residual gas components automatically begins when the total pressure is approximately 10 Pa or lower. 【Features】 ■ No complicated operations required ■ Portable ■ Capable of measuring residual gases even in low vacuum ■ Tough and resistant to dirt *For more details, please refer to the PDF document or feel free to contact us.

• Data Logger
• Vacuum Equipment
• Other measurement, recording and measuring instruments

The CC-10 wide-range vacuum gauge can continuously and automatically measure from atmospheric pressure to ultra-high vacuum with a single gauge. Traditionally, pressure measurement systems required separate gauges for rough and high vacuum, along with a vacuum switch (atmospheric pressure sensor) to return the chamber to atmospheric pressure (purge). This CC-10 wide-range gauge makes it possible to do all of this with just one unit. It integrates the sensor and circuit, and also includes a pressure display. By simply connecting the CC-10 to a vacuum chamber and supplying DC 24V (an AC adapter is also available as an option), no further switch operation is needed. Measurement automatically starts from atmospheric pressure, and the pressure is displayed, with the ability to output pressure signals externally via analog output and digital communication (RS-485). 【Features】 ○ No operation required ○ Tough and safe gauge ○ Excellent accuracy and stability ○ Easy maintenance ○ Energy-saving and space-saving For more details, please contact us or download the catalog.

• Vacuum Equipment
• Other physicochemical equipment
• Pressure Control

■ The pressure data from the vacuum gauge is imported to the PC's USB port, displayed in real-time as a graph, and recorded as a CSV file. ■ If the experiment reaches the starting pressure or fails to reach the specified pressure within the expected time, the device will instantly notify you at any designated email address, so you can be away from the device without worry. ■ During data measurement, you can mark any point on the graph and write comments, allowing for usage similar to a chart recorder. ■ Up to 16 vacuum gauges can be recorded by a single PC.

• Data Logger
• Vacuum Equipment

We have developed a technology that enables extremely low gas emission vacuum systems by using titanium alloys as materials for vacuum chambers and vacuum components. This allows for the rapid and easy attainment of ultra-high vacuum/vacuum levels. Titanium is inherently a suitable material for vacuum applications. It has many advantages, such as being lightweight, completely non-magnetic, having a low thermal expansion rate, and low thermal capacity. Our technology has added even more important characteristics for vacuum applications to this already excellent titanium material. - Through the development of surface treatment technology, we have been able to reduce gas emission by two to three orders of magnitude compared to stainless steel. This enables very fast evacuation to ultra-high vacuum levels. - The development of special titanium alloys has made it possible to create CF flanges, which are essential for ultra-high vacuum, with higher strength and hardness compared to stainless steel. - The development of manufacturing technology has made reliable welding and brazing of titanium, which was previously difficult, possible. This has enabled the production of various complex-shaped vacuum chambers and vacuum components.

• Vacuum Equipment
• Other physicochemical equipment

- We will provide consulting for modifications to improve the productivity of your company's production vacuum equipment. Additionally, upon request, we can undertake part or all of the development and design work. - We will assist with vacuum-related testing and experiments in the form of contracting or consulting. - We will provide and conduct educational programs for your vacuum engineers. - Furthermore, we offer a wide range of know-how and information regarding vacuum technology and the vacuum-related market, so please feel free to consult with us.

• Testing Equipment and Devices

VISTA Corporation offers a diverse lineup including TELEMARK-manufactured electron guns and quartz film thickness monitors. TELEMARK's electron guns come in a wide range of products, including ultra-high vacuum compatible types, general-purpose high vacuum types, single pocket, rotating, linear types, and crucible volumes ranging from 4cc to 1500cc, with maximum beam powers from 3kW to 15kW. Additionally, effectively removing moisture from deposition equipment is an essential challenge for vacuum deposition. The TELEMARK cryo trap TVP series effectively adsorbs and exhausts water vapor by circulating a refrigerant at -150°C through cryo coils installed in the vacuum chamber, significantly lowering the water vapor partial pressure and dramatically reducing exhaust time. 【Product Lineup】 ○ Electron Guns ○ Electron Gun Power Supplies and Accessories ○ Quartz Film Thickness Monitors / Thickness Controllers ○ Cryo Trap TVP Series ○ Ion Source Systems For more details, please contact us or download the catalog.

• Vacuum Equipment
• Other physicochemical equipment
• Evaporation Equipment

We will provide you with products that meet your desired specifications from TELEMARK's diverse lineup of electronic guns.

• Vacuum Equipment
• Other physicochemical equipment
• Evaporation Equipment

We will provide you with a product that meets your specifications from TELEMARK's diverse lineup of electronic guns.

• Vacuum Equipment
• Other physicochemical equipment
• Evaporation Equipment

We will provide products with the specifications you desire from TELEMARK's diverse lineup of electronic guns.

• Other surface treatment equipment
• Vacuum Equipment
• Evaporation Equipment

We offer a diverse lineup of electronic gun power supplies.

• Vacuum Equipment
• Other physicochemical equipment
• Other power sources

Based on the latest technology for crystal film thickness monitoring, we perform monitoring and control of the rate and film thickness, as well as control of the deposition sequence. Precise and stable deposition is possible with high-resolution and high-speed measurements. The design excels in scalability and versatility, making it suitable for various applications.

• Other process controls
• Vacuum Equipment
• Other surface treatment equipment

We provide the ideal ion source for ion-assisted deposition made by TELEMARK. The ion-assisted deposition (IAD) technology is a process that enables high-density and stable film formation without excessive substrate heating. TELEMARK's gridless ion source system allows for stable ion-assisted deposition on various substrates such as glass, plastic, and metal, thanks to its uniquely designed ion source.

• Evaporation Equipment
• Other physicochemical equipment
• Vacuum Equipment

Rapid cooling, rapid heating Effectively removing moisture from the deposition equipment is an essential challenge for vacuum deposition. The TELEMARK cryochiller series incorporates the latest technological advancements in cryochillers.

• Cooling system
• Vacuum Equipment
• Other physicochemical equipment