トレックス・セミコンダクター Product Lineup

The "XC6242 Series" is a regulator that achieves an ultra-low consumption current of 0.8μA. It can be used for charging secondary batteries that support CV (Constant Voltage) charging. By adding a diode on the input side, the sink current from the secondary battery to the regulator can be suppressed to 0.24μA, significantly contributing to extending the battery life when not charging. 【Features】 ■ CV ■ For charging-compatible secondary batteries ■ Charging IC (0.8μA ultra-low consumption regulator) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• Charger

The "XC6705 Series" is a high-speed regulator IC using a CMOS process that achieves high precision and high ripple rejection while consuming only 1.2μA of low current. Internally, it consists of a reference voltage source, error amplifier, P-channel driver FET, current limiting circuit, thermal shutdown circuit, phase compensation circuit, and more. To suppress inrush current and overshoot during startup, it is equipped with a soft start function that ramps up the output voltage in 1.0 ms. 【Features】 ■ 20V Input 200mA ■ Low consumption 1.2μA ■ Green Operation compliant *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "XCL104/XCL105 Series" is a coil-integrated boost synchronous rectification DC/DC converter that incorporates a 0.17Ω N-channel driver FET and a 0.23Ω P-channel synchronous rectification switch FET. It can start from an input voltage of 0.9V and is designed for use with a single alkaline or nickel-hydride battery. The output voltage can be set in the range of 1.8 to 5.5V in 0.1V steps. 【Features】 ■1.4A ■Coil-integrated ■Boost ■Green Operation compatible *For more details, please refer to the PDF materials or feel free to contact us.

• converter

The "XCL233 Series" is a coil-integrated step-down synchronous rectification DC/DC converter that uses ultra-low current consumption circuits and PFM control. By integrating the control IC and coil, it achieves miniaturization, allowing for a space-saving power supply configuration with just two external capacitors. The ultra-low current consumption circuit and PFM control method enable high efficiency under light load conditions. 【Features】 ■ Ultra-low consumption ■ Output voltage switching function ■ 150mA ■ Coil-integrated step-down *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "XC6138 Series" is a high-precision voltage detector capable of detecting high voltage with separated sense terminals and an external delay capacitor. The maximum applied voltage at the sense terminal is 76V, and the detection voltage can be set between 2.3V and 20.0V, allowing for direct monitoring of high voltage. The release voltage can also be set in the range of 2.5V to 24.0V, enabling the selection of various combinations of detection and release voltages. 【Features】 ■ Separated sense terminals (maximum applied voltage 76V) ■ Low consumption (0.5μA) ■ Multifunctional *For more details, please refer to the PDF document or feel free to contact us.

• Piezoelectric Devices

The "XC9290/XC9291 Series" is a 600mA synchronous rectification DC/DC converter that employs HiSAT-COT control. By increasing the oscillation frequency, it aims to reduce the mounting area while achieving efficiency equal to or greater than conventional products through improvements in on-resistance and current consumption. This makes it suitable for devices that require a compact and low-profile design, as well as battery-operated devices such as mobile equipment. 【Features】 ■ HiSAT-COT control ■ Ultra-compact ■ 600mA ■ Step-down *For more details, please refer to the PDF document or feel free to contact us.

• converter

The "XD6239 Series" is a high-speed LDO regulator that achieves high precision, low noise, high ripple rejection, and low dropout. It consists of a reference voltage source, error amplifier, driver FET, current limiting circuit, phase compensation circuit, thermal shutdown circuit, and inrush current prevention circuit, among others. It has built-in current limiting and thermal shutdown functions, which activate the protection circuit when the output current reaches the limit current or the junction temperature reaches the limit temperature. 【Features】 ■ Automotive use, rated for 125°C ■ Low noise and high PSRR ■ ON/OFF control function ■ 300mA *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "XC8110/XC8111 series" is a load switch that employs a fold-back method, allowing it to be used safely even during short circuits. It reproduces an ideal diode and is equipped with chip enable (CE), overcurrent limiting, and other features. Since it regulates the VOUT terminal voltage to VIN-20mV, it can reduce heat generation compared to conventional diodes. 【Features】 ■ Includes inrush current limiting and thermal shutdown functions ■ Overcurrent limiting adopts constant current limiting and fold-back current limiting ■ The fold-back method allows for the short circuit current to be limited to 50mA ■ The thermal shutdown function protects the IC from thermal destruction ■ The low-profile (h=0.33mm) USP-6B06 package is useful for applications where there is limited height in the device *For more details, please refer to the PDF document or feel free to contact us.

• Dedicated IC

The "XC9276 Series" is a 150mA step-down synchronous rectification DC/DC converter that features ultra-low power consumption circuits and PFM control, along with a low power consumption output voltage switching function. It reduces the consumption current to as low as 200nA, significantly improving efficiency under light load conditions. Additionally, by inputting an external signal to the VSET terminal, it is possible to switch the output voltage in two levels. 【Features】 ■ Utilizes ultra-low power consumption circuits and PFM control ■ Equipped with ultra-low power consumption output voltage switching function ■ Reduces consumption current to 200nA ■ Significantly improves efficiency under light load conditions ■ Capable of two-level switching of output voltage *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• converter

The "XP23/XP26 Series" is a general-purpose N-channel MOSFET that achieves low on-resistance and high-speed switching characteristics. It can be used in various applications such as relay circuits and switching circuits. As an electrostatic countermeasure, it has a built-in gate protection diode. The package adopts a compact SOT-23 (TO-236) (2.9 X 2.4 X h1.15mm), contributing to the miniaturization of equipment. 【Features】 ■ Built-in gate protection diode ■ Low on-resistance ■ High-speed switching *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "XC6237 Series" is a high-speed LDO regulator IC manufactured using a CMOS process, achieving low current consumption, high precision, and high ripple rejection. The output voltage is fixed internally and can be set within the range of 1.2V to 5.0V (0.05V step). In light load conditions, it operates in PS mode with low current consumption to achieve high efficiency, while in heavy load conditions, it operates in HS mode for high-speed performance. 【Features】 ■ Achieves low current consumption, high precision, and high ripple rejection ■ Equipped with Green Operation (GO) function that balances high-speed operation and low current consumption ■ Operates in PS mode with low current consumption during light load conditions to achieve high efficiency ■ Suitable for applications requiring low current consumption and high-speed operation *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "XC6193 Series" is a push button load switch equipped with functions suitable for battery applications. By using the push button, the built-in high-side switch can be turned ON (the A type can also be turned OFF), and it can be turned OFF via a signal to the SHDN terminal from an MCU or similar device. Additionally, the leakage current during shutdown is very small at 10nA (typical), making it useful not only for main power switch applications but also for reducing battery discharge during long-term storage after the equipment has been shipped. 【Features】 ■ Easily implement the main switch for the main power of battery-operated devices ■ Very low leakage current during shutdown at 10nA (typical) ■ Useful not only for main power switch applications but also for reducing battery discharge during long-term storage after equipment shipment ■ Equipped with a GATE terminal to drive an external P-channel MOSFET in addition to the built-in high-side switch *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• switch

The "XBP141P-G" is a protective diode transient voltage suppressor suitable for high-speed signal lines with small terminal capacitance, making it ideal for line protection in USB 3.0 and similar applications. It features a DFN2510-10A package (2.5 x 1.0 x h0.55mm) that houses four TVS diodes, allowing for the protection of four lines. Additionally, it is an environmentally friendly product compliant with the EU RoHS directive and lead-free. 【Features】 ■ Terminal capacitance: 0.40pF (Line-to-GND) ■ Electrostatic discharge withstand voltage: 15kV Contact (IEC61000-4-2) ■ Environmental consideration: Compliant with EU RoHS directive, lead-free *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "XBP06V0U2MR-G" is a transient voltage suppressor implemented close to the external interface, designed to protect ICs located downstream from electrostatic discharge. With a small terminal capacitance of 0.8pF, it is suitable for high-speed signal lines, making it ideal for line protection in USB 2.0, HDMI, and similar applications. Furthermore, it features a compact SOT-23 package (2.9 X 2.8 X h1.3mm) that houses two TVS diodes, contributing to the miniaturization of devices. 【Features】 ■ Unidirectional (2 elements) ■ Terminal capacitance: 0.8pF ■ Electrostatic discharge withstand voltage: 15kV Contact (IEC61000-4-2) ■ Environmental consideration: Compliant with EU RoHS directive, lead-free *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts