山善 List of Products and Services

Water Stop Board (Box Wall) Just place it on the ground to stop water! A new type of water stop board that replaces sandbags.

• Other safety and hygiene products

LED Lamp for Food Showcases ★ Fluorescent lighting has been reborn, and it's energy-efficient A safe and secure purely domestic product incorporating the technology of top noodle machine manufacturer "Sodick" Five versions available to match your products: * VE Series ... LED for fresh food: Vividly fresh and juicy * MT Series ... LED for meat: Redder and juicier * Warm Color Series ... LED for bread and side dishes: Warm and fluffy * Basic ... LED for daily products: Clear and vivid travel * Marine Blue ... LED for beverages (PET bottles): Deep and clear water color

• LED Module

● Sterilization and disinfection with high-temperature water (digital display) at 30~140℃ ● High-pressure cleaning up to 10Mpa for effective oil stain removal ● Stainless steel body and stainless steel boiler ● Comprehensive safety measures - Dry burning prevention device - Flame monitoring device - Overheating prevention device - Dry water protection device - Motor overload protection device - Electromagnetic pump dry run prevention device

• High pressure cleaner

By creating a vacuum state for the waste liquid and heating, distilling, and cooling it at low temperatures: 1. The evaporated moisture is "collected and reused as water." 2. Only the remaining residue that does not evaporate is "disposed of as industrial waste." This significantly reduces the amount of industrial waste. The volume reduction rate and industrial waste cost are reduced to 1/10! (in the case of water-based processing liquids)

• Other environmental equipment

Good news for those who struggle with floor cleaning after work! 1. Layout of nozzle piping according to the arrangement of indoor equipment and the degree of dirt. 2. Automatic cleaning with foaming detergent at the push of a button. 3. Follows the floor surface even under equipment that is out of reach of hands and mops. 4. Automatic rinsing after cleaning. Benefits: - Improved cleaning effectiveness as dirt adheres for a longer time and penetrates into gaps. - Cleaning areas can be visually confirmed, ensuring safety with no splatter. - Technology that generates a large amount of foam from a small amount of detergent allows for extensive cleaning. - Low cost due to minimal use of chemicals. Demonstration operation is also available (prior confirmation of floor condition is required).

• Industrial Vacuum Cleaners

【☆Point 1☆ Finger Point Reading】 *Patent No. 5695806 Supports multi-stage and multiple readings (Multi-scan) Compatible model: WIT-220 -N Accurate input is possible by pointing at the barcode you want to enter. Easily target and read from densely packed barcodes. 【☆Point 2☆ IC Tag Reading Support】 Can read and write NFC IP-2 compatible tags. Compatible model: WIT-250 -N 【☆Point 3☆ Continuous Use for 12 Hours】 You can work without worrying about battery life from the start to the end of your shift. 【☆Point 4☆ Environmental Resistance】 Supports operating temperatures from -20℃ to 50℃. Dustproof and waterproof according to IP52 standards. Can operate in harsh environments. *No condensation 【☆Point 5☆ Robust Design】 Passed impact testing for 5,000 times *Dropped from a height of 10 cm onto concrete (This is a test value and not a guaranteed value.)

• Handheld barcode reader

This is an energy-saving model that emphasizes efficiency. It features a lightweight design at 2.9 kg with an integrated power supply. The compact rectangular shape also improves installation efficiency. It has a seismic structure for hoist cranes that meets the manufacturer's strict testing standards (impact resistance of 5G and vibration resistance of 4.5 m/s²). It can be used in high-temperature environments up to 60°C. With a dimming function, it can be used up to 70°C while further saving energy. It is suitable for use in harsh environments such as areas with heavy salt damage or high temperatures with oil smoke generation. It complies with protection performance IP65.

• LED lighting

Deburring is an essential and labor-intensive process in manufacturing that cannot be avoided! While it is a monotonous task, it currently requires staff with a certain level of skill. 　　　　　【Concern】Difficulty in securing personnel 　　　　　【Concern】Want to improve work efficiency 　　　　　【Concern】Want to eliminate inconsistencies in finishing quality 　　　　　　 　　　　　 To everyone struggling with deburring tasks 　　＼＼ We will assist you in automating the deburring process!! ／／ 　　"Can I really leave the detailed and complex deburring tasks to a robot?" ★☆ Leave it to us!! First, download our catalog and take a look☆★

• Articulated Robot

By the way, what is BCP? BCP (Business Continuity Plan) is a specific action plan established in advance for responding to emergencies, so that when threats (such as natural disasters, man-made disasters, or infectious diseases) that can cause business interruptions occur, the business can recover quickly even if it is interrupted. What kind of service is BCP.ERS? We support all aspects of BCP formulation, from BCP formulation consulting to the implementation of BCP measures (such as equipment and stockpiles). Assuming a natural disaster occurs, we will diagnose your company's business continuity capabilities from both the "soft aspects (documents, regulations, procedures, etc.)" and "hard aspects (facilities, equipment, etc.)" and provide one-stop support for BCP formulation consulting and the introduction of equipment and stockpiles based on the results. Specific introduction of services https://www.bcpers.com/ Our website provides a detailed introduction to the services of BCP.ERS. Additionally, you can view a guidebook that highlights the products that should be prepared for each site in BCP formulation!

• Management consultant/Small business consultant

○ EzROBO-5GX series achieves high-precision coating with high rigidity ○ EzROBO-3GX series is compact, low-cost, and supports cell production ○ EzROBO-Ace series enables coating of large substrates and three-dimensional coating ○ Compatible with all adhesive applications. Automation for a wide range of materials from low to high viscosity ○ Torque management type screw tightening robot - all-in-one solution from tightening to torque management ○ UV adhesive coating and curing handled by a single unit ○ Blue-ray drive (precision screw tightening for thin chassis) ○ Achieves high-precision coating for packaging. Fully compatible with camera teaching

• dispenser

○ Automation of manual work ○ Deburring possible with consistent quality ○ Achieving low-cost deburring operations ○ Tool tip tilts 5° and shrinks by 5mm ○ Short teaching time as processing follows the workpiece ○ Ideal for deburring operations with robots

• Wafer processing/polishing equipment

● Washable The filter box interior can be washed. If it has a resin filter, the filter can also be washed. ● No Contamination The interior of the main body has no corners or flanges and is composed of curved surfaces, making it difficult for dust to accumulate and ensuring hygiene. ● Easy Cleaning The filter box can be easily separated by simply removing the catch clip, making cleaning tasks straightforward. ● Blow-off Automatic pulse jet (at regular intervals; differential pressure detection is optional). ● Options HEPA filter specifications and airflow/static pressure detection pulse backwash specifications are also available.

• Dust collector

○Significant reduction in program creation time ○Operational verification possible while creating the program ○No specialized knowledge required, so it can be created by non-experts ○Data such as stop position, speed, and acceleration can be modified from the touch panel

• Other process controls

○ The program content is easy to understand ○ Significant reduction in program creation time ○ No specific programming language required For more details, please view the catalog by downloading it or contact us.

• controller

○Easy to use with simple connections ○Significantly reduced power consumption compared to air pressure cylinders ○No oil mist dispersion ○Maintenance-free ○Multi-point positioning (up to 16 points) can be easily set up

• cylinder

●Examples of installation in data centers ●Examples of installation in server racks ●Examples of installation for artworks ●Examples of installation for optical and precision equipment The seismic isolation module TSG type allows for flexible layout. It can accommodate partial seismic isolation for heavy objects and floor seismic isolation. (Load capacity: up to 3000 kg per 1 m³) The seismic isolation table TSD type is a seismic isolation device that functions simply by being installed on the floor. It has been widely adopted for servers, precision equipment, and artworks. (Load capacity from 30 kg to 1200 kg)

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "Ergo Hand Baraman," which achieves labor-saving in the transfer and transportation of heavy objects, offers a wide range of models to accommodate various work environments, including the "Air Baraman," the "Electric Baraman" for use with a 200V power supply, the "Hybrid Ultra Baraman" that provides safer and more user-friendly handling, and the simpler "Hoist Baraman."

• Balancer

- One motor can achieve 2D transport, allowing for efficient use of space. - Long-stroke high-speed transport is possible up to 20 meters. - Multi-point positioning, soft start, and soft stop can be freely controlled. - It is possible to install the servo motor that the customer is accustomed to using.

• Other conveying machines

○ The transportation labor for collection can be significantly reduced. ○ Cutting oil can be separated from the molded products (brickets), allowing for the recovery and reuse of cutting oil. ○ Space can be saved in the scrap storage area. ○ It can contribute to environmental management and improvement under ISO 14001. ○ It is ideal for cutting chips from iron, aluminum, castings, brass, and more. ○ It can also handle powders such as grinding sludge and dust.

• Other environmental equipment

- Standard general-purpose machine with a compact body for powerful cleaning - Safe and reliable simple design - Easy loading and unloading with automatic closure

• Other cleaning machines

○Processing capacity 1,000 to 1,500 units/hour SPC-C106TDD (Twin drying type) ○Processing capacity 300 to 500 units/hour SPC-53 (Low pressure type) ○Processing capacity 500 to 1,000 units/hour SPC-S10T4 (High pressure type) ○Processing capacity 300 to 600 units/hour SPC-5D3 (Low pressure type with dryer) ○Processing capacity 500 to 1,000 units/hour SPC-S10T4D (High pressure type with dryer)

• Other cleaning machines

- No need for mechanical stoppers or sensors, making layout changes easy. - Setting the stop position only requires program changes, allowing for quick reconstruction. - Flexible response to frequent setup changes due to product variations. - Parts are standardized, making it easy to keep maintenance parts on hand. - Easy to replace parts. - Can minimize downtime of the manufacturing line. - Motors and scales are non-contact and do not wear out. - Sliding parts are low dust generation with only rails. - Few consumables and long lifespan.

• Conveyor

○ 4-column circular arc groove type, 2 points ○ Adopts highly reliable lever valve ○ Easy maintenance ○ Lightweight and compact ○ Standard support for double Y-axis

• Other industrial robots

○Maximum speed 2.5 m/sec, no dangerous speed ○Optimal for transporting heavy objects, maximum load capacity 160 kg ○Effective use of stroke ○Low cost for in-house production of key components

• Other industrial robots

○Supports large moment loads 4-row circular groove type 2-point contact guide ○Easy maintenance with direct coupling structure ○Uses resolvers with excellent environmental resistance for position detectors ○Controllers available according to application

• Other industrial robots

○ A new control method that combines the advantages of servo and stepping motors ○ Closed-loop control using a resolver with excellent environmental resistance ○ High resolution

• Other industrial robots

- Compact equipment with free layout design - Improved productivity through reduced takt time - High-speed transport of heavy workpieces - Space-saving with reduced equipment height

• SCARA Robot

○ You can purchase after confirming operation with the actual machine through a free loan system. ○ Positioning (position, speed, acceleration, torque control) of 16 points is possible with I/O commands (ON/OFF signals) only. ○ The elimination of the need for positioning units and pulse generators simplifies the system and reduces costs. ○ Standard specifications allow for compatibility with serial communication and various field networks. ○ There is no micro-vibration when stopped, making it ideal for inspection devices using cameras.

• Servo motor

- Increased radial load capacity due to the incorporation of bearings in the bush and a powerful rod! - Mounting brackets available for use in clevis applications.

• cylinder

Features ○ With a world-patented double float structure, it flexibly follows the fluctuations of waves and liquid levels, continuously and tirelessly suctioning and recovering surface oil 24 hours a day. ○ As a floating pump skimmer, it can recover and transfer floating oil with just this one unit. ○ It demonstrates stable durability even with oil mixed with highly abrasive chips, abrasives, and sediment (model YD-810GYP). ○ Available in two types: single-phase 100V and industrial three-phase power (excluding model YD-1200GYP). ○ By matching AL molded parts (powder coating) with lightweight SUS/resin pumps, it achieves approximately 40% weight reduction compared to conventional models.

• Other environmental equipment

- The floating oil recovery float section features a patented double float structure. - The standard adoption of an inverter allows for stepless pump speed adjustment. - The oil-water separator is equipped with a patented forced oil discharge mechanism as standard. - The SUS304 separator is capable of handling high-temperature liquid recovery and is easy to maintain.

• Other environmental equipment

○Improvement of cleaning quality ○Reduction of cleaning wastewater ○Prevention of heater burn

• Other environmental equipment

This is a mobile coolant floating oil recovery device that does not require complicated electrical work because it operates on an air-driven system. The oil-water separation uses a specific gravity separation method, so there are no consumables like filters. There is no need for troublesome replacement work, making it hassle-free. It comes standard with an easily cleanable strainer, ensuring no pump clogging even when recovering floating oil mixed with chips. 【Features】 - The float installation area is only 116×300 mm. - Adopts a 2-way float system. - Three points that are not affected by hose bending. - Easy to move even with casters. - There is a float storage space on the top of the main unit, so there is no trouble finding a place to put it during transport. - Comes standard with an easily cleanable strainer, ensuring no pump clogging even when recovering floating oil mixed with chips. - Equipped with an automatic stop device for full barrels, providing peace of mind even during unmanned operation.

• Other environmental equipment

- The pump and separator are integrated, compact, easy to install, and low-cost. - Adopts a donut-shaped flow (can be collected from all directions, 360°). - Usable in shallow tanks. - The pump uses a screw feeder type. - No consumables required.

• Other environmental equipment

○ Drum shaker developed for stirring the contents of a drum ○ Can be used not only for mixing inside the can but also for stirring and cleaning ○ Equipped with ample safety devices during operation ○ Reduces stirring time with continuous rotation

• Mixer/agitator

○ Adopts a diaphragm pump system for low maintenance and high-speed recovery of floating oil. ○ Primary filter and oil fence are easy to clean and do not require replacement of consumables. ○ The inlet uses a compact 4-float system for stable inlet operation and space-saving design. ○ Usable at a water depth of 55mm.

• Other environmental equipment

The Cool Roof Fan is an air supply device equipped with a special element that promotes the evaporation of water for heat dissipation. It can supply air while transforming hot outside air into a cool breeze, achieving excellent cost performance for heat prevention measures compared to air conditioning-based ventilation plans. ● Cool and comfortable with a refreshing breeze ● Comfortable even with large airflow ● Outstanding cost performance ● Smooth replacement construction ● Space-saving and non-Freon design ● Suitable for environments where air conditioning installation is difficult

• Ventilation and Exhaust

●Easy cleaning of liquid inside the tank ●Dehydration treatment of sludge is possible ●Long life as a simple filtration device ●One-touch connection compact design ●Power source is only compressed air

• Other environmental equipment

- Adoption of a suction part that automatically follows liquid level fluctuations - Use of a bellows pump for stable recovery of floating oil - Recovery of floating oil from machine tool coolant tanks - Removal of floating oil from drain water such as from compressors - Removal of floating oil during the cleaning process of processed parts - Oil-water separation tank - Removal of mixed oil from cooling water, etc. - Recovery of floating oil from wastewater treatment facilities

• Other environmental equipment

● The chips, which have become sticky with cutting oil, are degreased using centrifugal force. The oil recovery rate is highly efficient at 85-99%. ● By almost completely separating cutting oil from chips, the recycling efficiency of valuable resources is remarkably improved.

• Other environmental equipment

- We continuously meet the drainage standard set by the government for oil concentration (n-hexane extractable substances) of 5 ppm or lower. Additionally, we offer auxiliary equipment that consistently meets the drainage standard of 3 ppm or lower as per the supplementary regulations. - All models are equipped with a drain separation tank. - All models are equipped with a clean water confirmation tank. - Used filter tanks will be disposed of as industrial waste by our company, eliminating the need for users to handle industrial waste disposal. - ISO 14001 certification obtained. - Patented equipment. For more details, please view the catalog by downloading it or contact us.

• Oil-water separator

The conversion to LED lighting is an effective energy-saving measure for factories. However, brightness significantly impacts work efficiency and self-prevention. It is essential to consider not only energy-saving performance but also to have LED lighting that perfectly fits all locations and tasks. In this magazine, we will assist you in converting to optimal factory lighting with a rich product lineup! - Choose the best lighting based on scenes, tasks, and industries - Includes a chart showing how much energy can be saved through LED conversion - Explanation of preferential tax systems

• LED lighting

- Noise suppression from the equipment - Adaptable to the environment - Maximum intrinsic energy consumption efficiency of 140.5 lm/W - LED module lifespan of 60,000 hours - Operating temperature range of -20°C to +40°C, with temporary support for high temperatures up to +50°C during summer - Lightweight equipment design compliant with new seismic standards - Dimmable

• LED lighting

○ Suppression of noise emitted by the equipment ○ Capable of adapting to various environments ○ Unique energy consumption efficiency (maximum) 140.5 lm/W ○ LED module lifespan of 60,000 hours ○ Operating temperature range -20°C to +40°C, also supports temporary high temperatures of +50°C during summer, etc. ○ Lightweight equipment design compliant with new seismic standards ○ Dimmable

• LED lighting

● The robot's posture can be changed while maintaining the position and orientation of the welding torch. ● Teaching of the complex 7-axis robot is made easy with simple manual operations utilizing synchro motion technology. ● The world's first! Welding power cable content for 7-axis assembly. Teaching can be performed without worrying about interference with fixtures or workpieces.

• Welding robot