株式会社テストラム Product Lineup

Are you relying solely on the reader-writer for tag communication failure testing? The "T9300" is a UHF band mass production tag tester, made in Japan, that communicates with UHF tags while stepping power across a frequency range of 800MHz to 1300MHz, allowing for the plotting and evaluation of UHF tag communication performance. You can set several inspection points and perform PASS/FAIL judgments at any designated inspection point, enabling complete inspection in mass production equipment. Additionally, inspections can be executed easily through dedicated software without the need for complex settings. Inspection results can be output as files. Antenna (sold separately): 800MHz to 1000MHz specifications, three types; development for over 1000MHz is ongoing. 【Features】 ■ High-speed mass inspection at 5ms ■ Communication performance evaluation ■ Easy operation ■ Achieves low-cost UHF tag inspection ■ Identification of unstable tags We have established a dedicated repair and calibration group to provide repair and calibration services even after sales. Custom antenna creation is also available. *For more details, please download the PDF or feel free to contact us.

• Other inspection equipment and devices

The "T8200Shannon" is an RFID tester designed for mass production that can save inspection results to a log file in PC-linked mode, operating in the HF band. It allows for inspection at various manufacturing stages to verify whether the produced RFID meets the expected resonant frequency characteristics. With its capability for high-speed inspection across multiple channels, it is suitable for quality control in manufacturing processes where variability is common. The criteria for judgment can be set arbitrarily by the user. 【Features】 ■ Capable of inspection before assembly, after assembly, and in the final product stage ■ Improves quality in IC assembly ■ Inspection logs can be recorded ■ Simultaneous inspection of mounted RFIDs is possible ■ The T8200 Shannon can be integrated into mass production equipment for comprehensive inspection *For more details, please download the PDF or feel free to contact us.

• Other inspection equipment and devices

Features - The TAT150 can attenuate the electric field strength level at a volume, allowing for communication testing at any output. - When used in combination with the T8200PRO, it can test for responses from the subject under inspection at a specified output for ID reading of communication functions without affecting the resonant frequency measurement, enabling verification of the operational levels of IC cards, tags, NFC, and more.

• Other inspection equipment and devices

This is a device that issues various high-security contact IC cards such as JAVA, EMV, and MULTOS, compliant with ISO/IEC 7816. Additionally, it can be equipped with an optional R/W for contactless IC cards, allowing for the issuance of contactless IC cards as well.

• Other inspection equipment and devices

The "Contact and Non-contact IC Card Inspection and Issuance Device" is a machine that performs inspection and initial issuance of contact and non-contact IC cards, as well as final testing before secondary issuance. It supports combination and dual-type IC cards. The device conducts inspections of warping thickness, communication, contact parts, and non-contact parts, as well as printing and issuance. Additionally, it can include tests for strong electric field application and Q-value measurement. 【Features】 ■ Strongly supports mass production with simultaneous inspection and issuance of contact and non-contact cards with a proven track record of 20 channels. ■ ID data is managed by the host PC. ■ Provides peace of mind with the assurance of always knowing "what is being produced." ■ Confident in stability and long-term operation required in mass production environments. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• IC tag

The "Contact/Non-contact COT Inspection Issuing Device" is a machine that conducts shipping inspections, acceptance inspections, and issuance for IC card modules COT (Chip On Tape). By performing tests at the COT stage and writing the common program only to good products, it is possible to improve the productivity of IC card production during the 0th and 1st issuance stages. It can also perform general DC characteristic measurements, high-temperature load tests, non-contact polling inspections, issuance, and appearance inspections. 【Features】 ■ Can improve productivity ■ Flexible customization for changes or additions to measurement items ■ Strongly supports the mass production of reliable IC module products for customers *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• IC tag

The "V2048" is a semiconductor tester capable of conducting four simultaneous tests. With its reasonable pricing, it is easy to expand the tester itself. With high fault tolerance and a clear user interface, it helps facilitate efficient mass production. 【Features】 ■ Capable of mounting a 60A high current power supply (HCDPS) ■ Simultaneous measurement of 4 DUTs ■ Equipped with function features that support configuration/information reading via JTAG and other methods *For more details, please refer to the PDF materials or feel free to contact us.

• Tester
• Other semiconductors

The "IC Card Module Delamination Inspection Device" applies stress to the IC card in both the long and short directions to detect adhesive defects in the IC card module mounted on contact-type IC cards. Through this inspection, we can identify "modules that may delaminate in the future," providing peace of mind for the shipment of IC cards used in demanding situations. 【Basic Functions】 ■ Bending (long direction and short direction) + adhesive defect inspection ■ Bending (long direction) + polling inspection ■ Appearance inspection (position and scratches) of modules for contact-type IC cards *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• IC tag

The "CM-1" is a handheld card counter that supports color core cards and metal cards. Equipped with a high-speed processor and two high-precision optical sensors, it features a precise logical analysis circuit, making it possible to count color core cards and metal cards that were previously difficult to count. Despite being a handy type, it is highly durable, easy to use, and can be used in various locations. 【Features】 ■ Usable for color core cards and metal cards ■ Also capable of counting the number of My Number cards ■ Can be used with cards thicker than 0.45mm, compatible with traditional plastic cards ■ Compact and portable ■ Excellent durability *For more details, please refer to the PDF document or feel free to contact us.

• IC tag
• Other inspection equipment and devices

You can communicate with UHF tags in the frequency range of 800MHz to 1000MHz while stepping the power, allowing you to evaluate the communication performance of UHF band tags in a plot. • You can determine inspection points (thresholds) while confirming the communication area (boundaries) of normal tags. • Multiple inspection points can be set arbitrarily, and only the set points can be evaluated for [PASS/FAIL] judgment. Control from mass production equipment (PLC) is also possible via the optional DIO interface. • The response waveform from the inspected tags can also be visually confirmed. • Dedicated software is included, making it easy to set scenario configurations and inspection conditions. • Inspection logs can also be saved.

• IC tag
• Other inspection equipment and devices

● Supports troubleshooting for NFC-equipped products and various RFID products. There are various causes for RFID malfunctions. For example, issues such as "the resonant frequency does not match with the reader/writer," "the internal antenna is disconnected," or "it does not respond well when integrated into the product" can have multiple underlying causes. In such cases, you can use the T8200PRO to identify the cause of the malfunction and inspect the finished product. ● Making resonant frequency testing more convenient and easier. Measuring instruments like network analyzers require specialists for operation. In contrast, the T8200PRO has no complex operations and does not require an expert for testing. You can connect it to a computer with just one USB cable and start immediately. The inspection screen is easy to understand for anyone, providing support to the person in charge. Additionally, it is compact and lightweight, making it portable for troubleshooting on-site.

• Other inspection equipment and devices
• IC tag

This is a device that conducts stress endurance tests related to the bending characteristics of cards and has an automatic stop function when the set number of cycles is reached. By replacing the crank unit, dynamic bending tests can be performed by switching between the long side and the short side. It is also possible to conduct tests with deflection amounts that are stricter than the standards, providing peace of mind with cards that can withstand harsh usage environments. As a safety mechanism, it employs an emergency stop switch and an interlock cover. Customization of the testing machine is also possible. 【*For more details, please contact us.】

• Testing Equipment and Devices
• IC tag

This is a device that conducts stress endurance tests regarding the twisting characteristics of cards and has an automatic stop function when the set number of cycles is reached. It can also test with a twisting amount that is stricter than the standard, providing peace of mind with cards that can withstand harsh usage environments. As a safety mechanism, it employs an emergency stop switch and an interlock cover. Customization of the testing machine is also possible. 【*For more details, please contact us.】

• Testing Equipment and Devices
• IC tag

This is a device that conducts stress durability tests specifically focused on the bending characteristics of IC card module parts. It has an automatic stop function that activates when the set number of cycles is reached. It provides peace of mind with IC cards used as security cards, which can withstand the bonding strength of the IC module and disconnection failures with the card antenna. As a safety mechanism, it employs an emergency stop switch and an interlock cover. Customization of the testing machine is also possible. 【Features】 - Capable of conducting stress durability tests on the bending characteristics of IC cards - Enhances the safety of IC cards used as security cards - Customization of the testing machine is available *For more details, please contact us or download the PDF.

• Testing Equipment and Devices
• IC tag

This is a device for conducting stress durability tests related to the pressure characteristics of the module section of IC cards. The cards move periodically between three feeding rollers to measure the mechanical reliability of the module section. By replacing guide components, it can also accommodate six-terminal cards. As a safety mechanism, it employs an emergency stop switch and an interlock cover. Customization of the testing machine is also possible. 【*For more details, please contact us.】

• Testing Equipment and Devices
• IC tag