エイシン List of Products and Services

We have delivered a "tumbler mixer" that can be used with either 36L or 65L containers, designed for dual-use, and compliant with GMP (pharmaceutical) standards. As per our discussion, we have not performed the welding bead cut treatment. By changing and detaching the parts of the "body," "bottom plate," and "container handle," it can accommodate containers of different sizes. Since this was a GMP specification, we have used suitable materials. 【Case Overview】 ■ Delivered Product: Tumbler Mixer ■ Features - Dual-use container specification - GMP (pharmaceutical) compliant - Made with suitable materials *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

In addition to the metal touch measures for the 2-section grid mug filter, we have also adopted an air purge specification. This product can blow away the powder accumulated on the magnet. If you are interested, please feel free to contact us. *For more details, please refer to the PDF document or feel free to reach out to us.

• Other filters

Here is an example of the "two-stage lattice mag filter" with metal touch measures implemented. This product has resin guides installed on both sides as a countermeasure for the concern of stainless steel rubbing due to the attachment and detachment of the magnet. Additionally, we have adopted hinges and handles with metal touch measures for clean rooms. Although it is on the outside of the case, there are sliding parts, so we designed it based on customer requests. The necessity may vary by industry, so we can manufacture according to requests such as "I only want to install the resin guide" or "only the handle part." **Features of the Two-Stage Lattice Mag Filter** - Equipped with resin guides - Adopted hinges and handles with metal touch measures for clean rooms *For more details, please refer to the PDF materials or feel free to contact us.*

• Other filters

We conducted a mixing test of "pea protein + carrot powder + corn starch" and "pea protein + kale powder + corn starch." With "carrot powder," it seemed to mix evenly even in a short time, but with "kale powder," there was not much change observed after 1 minute and 3 minutes, resulting in unevenness. Therefore, we received a suggestion from a customer to "try adding baseballs," and we added three regular baseballs. After opening it 10 minutes later, there still seemed to be some unevenness and lumps, but compared to before using the balls, there was a clear difference. Since we achieved results with the baseballs, we would like to consider using food-grade silicone balls in the future. [Test Overview] ■ Test Equipment: Tumbler Mini ■ Ingredients - Pea protein + carrot powder + corn starch - Pea protein + kale powder + corn starch *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

When it comes to containers used for stirring, many people might primarily think of flat-bottomed items like beakers. Therefore, we conducted an experiment to see if a truly non-flat container would work by using a dish-shaped container. As a result, we found that in order to stir with a dish-shaped container, it is necessary to select the shape of the rotor (testing is required), and since the bottom of the container has a skirt, it is necessary to consider whether it can be stirred from a distance. [Test Overview] ■ Content: Experimenting whether a stirrer can work with a dish-shaped container ■ Results: The following considerations are necessary - Selection of the rotor shape (testing is required) - Since the bottom of the container has a skirt, it is necessary to consider whether it can be stirred from a distance *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

We would like to introduce the surprisingly absent size of the mixers. We have taken some photos of a few models: the Drum Mixer DMH-200, the Tumbler Mixer TMHS-65S, and the Tumbler Mini TMCS-36S. The Tumbler Mini is very compact, making it relatively easy to introduce in places with limited space, such as fried chicken shops. Other test machines are also available for viewing at our headquarters. We also offer rentals, so please feel free to contact us. 【Compared Products】 ■ Drum Mixer DMH-200 ■ Tumbler Mixer TMHS-65S ■ Tumbler Mini TMCS-36S *For more details, please refer to the PDF materials or feel free to contact us.

• Mixer/agitator

The "Pot-Type Magnet Filter" is a liquid magnetic separation device designed to handle high flow rates and viscous liquids by arranging 1.2T magnets while maintaining clearance. It can be installed on the pump suction side, providing low pressure loss and protecting the pump. Outer pipe and jacket specifications can also be manufactured. It is effective for pre-treatment when placed before high-efficiency magnet filters and high magnetic force magnet filters, making it suitable for coarse removal. 【Features】 ■ Suitable for high flow rates, high viscosity liquids, pump protection, and coarse removal ■ Wide flow path ■ Options available ■ Efficient arrangement possible ■ Selection based on viscosity and flow rate *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

The "Grid Magnet Filter" is a magnetic separation device for powders that can remove not only iron-based metals but also stainless steel metal powders, thanks to its standard 1.2T magnetic force. We offer various options tailored to your needs, including an outer pipe for easy cleaning and collection, purge nozzles to prevent clogging, droplet-shaped magnets, resin guides for metal touch prevention, hinges, and handles. Custom designs are available to fit your specifications and installation space, and we can design according to your budget. 【Features】 ■ Ideal for removing foreign substances in powder and granular material lines ■ Ensures reliable foreign substance removal ■ Optional features available ■ Designed to fit the site *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

The "plate magnet" is a magnetic separation device for powder and granular materials that is suitable for areas where magnets cannot be directly applied to raw materials, such as on conveyor lines. While its surface magnetic force is weaker compared to the standard 0.5T and bar magnets (1.2T), it has a magnetic field that extends to distant locations. We welcome discussions about retrofitting for improvement purposes. We will design it to fit your specific site, so please feel free to contact us. 【Features】 ■ Suitable for removing distant metal powder ■ Wide magnetic field ■ Installable in restricted areas ■ Customized design for your site *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic sorting machine

The "Grid Magnet Filter" is a magnetic separation machine designed for powders, granules, and pellets. With a standard magnetic force of 1.2T, it can remove not only iron-based metals but also stainless steel powders. We offer two types: a high-magnetic scraper type and an outer pipe type with fewer consumable parts. We can accommodate various requests, including custom-made designs to fit specifications and installation space, as well as options for fully automatic and semi-automatic types to suit your budget. *For more details, please contact us or refer to the catalog.

• Automatic sorting machine

The "plate magnet" is an ideal magnetic separation device for removing metal powder from a distance. Although its surface magnetic force is weaker compared to the standard 0.5T and the bar magnet (1.2T), it has a magnetic field that extends to distant locations. It is suitable for areas where magnets cannot be directly applied to the raw materials, such as above conveyor lines. We welcome inquiries regarding retrofitting for improvement purposes. *For more details, please contact us or refer to the catalog.*

• Automatic sorting machine

The "pot-type mag filter" is a liquid magnetic separator that is ideal for high flow rates, high viscosity liquids, pump protection, and coarse filtration. By arranging a 1.2T magnet while maintaining clearance, it accommodates high flow and viscous liquids. Additionally, it can be installed on the pump suction side to protect the pump with low pressure loss. It is also effective for coarse filtration when placed before high-efficiency mag filters and high magnetic force mag filters. Options such as outer pipe specifications and jacket specifications are also available. *For more details, please contact us or refer to the catalog.*

• Automatic sorting machine

We will select the optimal type and size of metal powder to be removed based on the properties of the raw material, such as processing volume, temperature, viscosity, and adhesion. The length of the magnet can be ordered in 1mm increments. We will design and manufacture according to the front and back equipment, spacing, and available space. 【Magnetic Separator Lineup for Powder and Granules】 ■ Grid Magnet Filter ■ Automatic Cleaning Grid Magnet Filter ■ Rotary Magnet Filter ■ Plate-type Magnet Filter ■ Tumbler-type Magnet Filter ■ Mobile Magnet Filter *For more details, please download the PDF or feel free to contact us.

• Automatic sorting machine

We will select the optimal solution based on the type and size of the metal powder to be removed, as well as the properties of the raw material such as processing volume, temperature, viscosity, and adhesion. The length of the magnet can be ordered in 1mm increments. We will design and manufacture according to the front and rear equipment, spacing, and available space. 【Liquid and Powder Magnetic Separator Lineup】 ■ High-efficiency Mag Filter (1.0T to 1.35T) ■ High magnetic force Mag Filter (1.7T) ■ Mag Filter M ■ Mag Filter P ■ Pot-type Mag Filter ■ High-temperature compatible Mag Filter ■ Ball Mag Filter ■ Inspection Magnet *For more details, please download the PDF or feel free to contact us.

• Automatic sorting machine

This document summarizes basic knowledge about "mixers" used for mixing, adding, and homogenizing powder raw materials. In addition to fundamental information such as types of mixers and their intended purposes, it explains key points for achieving uniform mixing based on the characteristics of the mixtures. It also helps address challenges such as "prone to clumping" and "sticking to the mixing container." 【Table of Contents (Excerpt)】 ■ What is a mixer? ■ Types of mixers ■ Mixing cohesive powders ■ Mixing highly adhesive powders ■ Mixing powders that are prone to static electricity *This document can be viewed immediately via <PDF Download>. For more details about our products, please refer to the comprehensive catalog.

• Mixer/agitator
• Other powder equipment

The "High Magnetic Force Mag Filter (1.7T)" is a magnetic separation device for liquids and powders that uses permanent magnets to achieve a surface magnetic flux density of 1.7T. We have numerous achievements for customers looking to remove fine metal powders. We can design and manufacture tailored solutions for both liquids and powders to fit your production line. The tumbler type, which continuously circulates within the container, is ideal for batch processing, quality control, and research applications, efficiently removing metal powders. If you are dissatisfied with the removal of fine metal contaminants using conventional magnetic separators, please feel free to consult us. *For more details, please contact us or refer to the catalog.*

• Automatic sorting machine

- The wide flow path prevents damage to the ingredients. - Ideal for high-viscosity liquids and liquids containing solids. - Can also suppress the dispersion of dairy products. - Can be broken down easily, making cleaning straightforward. - High-temperature specifications are also available. Please consult us regarding CIP and SIP cleaning. - Magnetic force can be selected from standard options of 0.5T and 1.0T. (Please consult us) We have a test machine! Please check the dimensions of the test machine in the catalog.

• Automatic sorting machine

- We will alleviate the workload of daily cleaning tasks. - By not opening the inline in a dust environment, it contributes to environmental improvement. - It can operate stably without malfunction even with fine particles. Test results of 1μm carbon black: https://i-eishin.com/2021-0119/ - We can also propose semi-automatic types according to your budget. Test machines are also available. Please check the dimensions of the test machines in the catalog.

• Automatic sorting machine

Customers in the food and pharmaceutical manufacturing sectors are required to conduct regular capability verifications for all equipment and components present in the production process and to keep records of these verifications. Magnetic separators are no exception. You can trust Aisin Co., Ltd. to handle the regular inspections of magnetic separators. This eliminates the need to purchase a gauss meter and frees you from the hassle of measurements. Additionally, there is no need for issuing or managing inspection reports or calibration certificates that are valid for GMP/HACCP/ISO. Furthermore, no specialized knowledge is required, and measurement variability is eliminated. We can accommodate both in-house and third-party products. For more details, please contact us or refer to our catalog.

• Automatic sorting machine
• Other powder equipment
• Contract measurement

The "Powder Particle Bridge Rat Hole Countermeasure Air Flange" has a simple structure that only requires connection to the flange, eliminating the need for tank processing (such as drilling, welding, or polishing). Since it does not involve directly "striking" the tank, there is no need for the installation of reinforcement plates, and there is no localized damage. Additionally, there are no vibrations, so there is no concern about contamination of the product. It is also possible to accommodate explosion-proof measures using nitrogen or dry air. The design is compact. We have a test unit available, so please feel free to contact us. For more details, please inquire or refer to the catalog.

• Other powder equipment

The "TM-S, TM-P, TMH series" is a high-precision container rotation mixer that can use commercially available containers. The mixing container can be easily attached and detached, and since it uses stainless steel sealed containers, it ensures high safety and cleanliness without contamination. There are no stirring blades, and mixing is done solely by rotating the container, so there is no worry about damaging the raw materials. The machine size is compact and comes with casters, allowing it to be brought in only when needed for operation. 【Features】 ■ Convenience of containers and high safety ■ High mixing performance without damaging raw materials, achieved through container rotation only ■ Compatible with commercially available stainless steel sealed tanks and plastic drums For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

The "TMC-36/TMC-20" is a mixer that focuses solely on the essential functions needed for mixing. It enables efficient mixing of powdered and granular materials in a small space. It uses a stainless steel sealed container that is also used for food and pharmaceuticals. In addition to ease of handling, it has high washability and excellent hygiene. 【Features】 [TMC-36/TMC-20] ■ Compact & Slim ■ Easy to move with casters ■ Efficient mixing of powders and granules in a small space For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

The "DMH-200" is a container-tilting handle mixer that uses removable commercially available drums as mixing containers, offering high washability and eliminating concerns about contamination. Since it has no stirring blades, there is no risk of damaging the raw materials. Mixing occurs within a sealed tank with a lid, preventing dust generation of powdered raw materials into the surrounding area. Specifications for 150/300/400L are also available. 【Features】 ■ Easy operation for setting and removing commercially available drums ■ Soft and complete mixing without damaging raw materials ■ Processing in a sealed container, no dust generation ■ DM type with automatic container tilting also available For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

The "AXB-100" is a ball mill that allows you to move the discharged sample using the included lift-equipped cart. It collects only the sample into the receiving container while rotating with a mesh placed between the container and the pot. Additionally, we also offer the "AXB-50" with a capacity of 50L. 【Features】 ■ Samples are discharged into the receiving container and can be transported as is ■ Separation of balls and samples using a mesh ■ Dust prevention measures ■ Compatible with wet and paste specifications For more details, please refer to the catalog or feel free to contact us.

• Crusher

The 『AXB-15』 is a ball mill that allows for the movement of discharged samples using the included hand lifter. There is no need for pot loading and unloading after each material change, and it significantly helps improve the working environment by preventing dust from being stirred up. We also offer the AXB-25 model, which is compatible with magnetic pots φ360 (23L). Additionally, for stainless steel drums, we can manufacture them according to the required capacity, such as 25L or 30L. 【Features】 ■ Discharges materials within a sealed container ■ No need for pot loading and unloading ■ Scalable For more details, please refer to the catalog or feel free to contact us.

• Crusher

The "BM-15" is a basic tabletop ball mill with a one-way rotation type that can be easily used over a wide range. Due to its simple structure, there is almost no concern about breakdowns. The variable speed control via inverter frequency allows for easy changes in rotation speed. The spacing between the rollers that hold the pot can be adjusted, accommodating pots with a maximum diameter of 300 mm. We also offer a model with a safety cover, the "BMC-15," for the tabletop ball mill. 【Features】 ■ Easy to handle ■ Low breakdown rate ■ Adjustable roller spacing ■ Variable rotation speed For more details, please refer to the catalog or feel free to contact us.

• Crusher

The Eishin explosion-proof stirrer ADP-20 type is a fully explosion-proof stirrer characterized by its all-air drive with a wide rotation range. It allows for stable rotation and large-capacity stirring with a top plate measuring 310×310 mm. 【Features】 ○ It is a completely explosion-proof type that uses no electricity at all, as it is powered by an air motor. ○ To address the torque shortage of the air motor, three types of reduction types are available: high-speed, medium-speed, and low-speed. *For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

The Eishin tumbler mixer is a high-precision container rotation mixing machine that can use commercially available containers. The mixing container can be easily attached and detached, and since it uses a stainless steel sealed container, it combines high safety and cleanliness without contamination. There are no stirring blades, and mixing is done solely by the rotation of the container, so there is no worry about damaging the raw materials. The machine is also compact in size and equipped with casters, allowing it to be easily moved and used only when needed. 【Features】 - Convenience of containers and high safety - High mixing performance without damaging raw materials, achieved through container rotation only - Compatible with commercially available stainless steel sealed tanks and plastic drums - Compact design for easy use when needed, equipped with casters - Sealed mixing for contamination-free operation *For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator

At Eishin, which specializes in the design and manufacturing of magnetic separation machines as well as liquid and powder equipment, we are currently offering a "Comprehensive Catalog"! We feature a variety of products, including the "Magnetic Separator," designed to suit products such as high-viscosity liquids and highly adhesive powders, and the "Tumbler Mixer," which enhances safety. We also accommodate demo machines and custom manufacturing. ★ By clicking the 【PDF Download】 button below, you can immediately view the catalog! 【Featured Products (Partial)】 ■ "Mag Filter P" that handles high-viscosity liquids without damaging ingredients or solids ■ "Air Flange" that eliminates bridging using only air power without damaging the tank ■ "Completely Explosion-Proof Magnetic Stirrer" driven by air motor, no electricity used ■ "TM Series" that mixes only through the collapse motion of raw materials without damaging them, among many others!

• Automatic sorting machine
• Other powder equipment
• Mixer/agitator

The "Mortar Mill MM-10" is a product that automates the grinding process using a mortar and pestle, which can be labor-intensive during research and experiments. It allows for hassle-free grinding, and you can use your current mortar and pestle as is. ★ We are currently accepting applications for test machine rentals (for a fee and by reservation). If you are interested, please apply through [Contact Us]. 【Features】 ■ Efficient grinding with fine up-and-down motion and random movement of the balls inside the mortar ■ Desktop model suitable for use in laboratories and experimental settings ■ Comes with a transparent cover, allowing for easy monitoring of the grinding progress * For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Crusher

The "TML-02" is a mixer that can set commercially available PP containers into the device. Since it can set commercially available PP containers into the device, by replacing the containers each time, it can economically prevent cross-contamination. The standard container is the I-Boy 2L container, but the holder part can be removed, allowing for the holder to be exchanged to fit the desired container. Mixing can be done in a sealed manner, eliminating concerns about external contamination and preventing dust generation to the outside. 【Features】 ■ Set the entire PP container into the device ■ Sealed mixing prevents contamination ■ Can use commercially available containers, allowing for color changes, fragrance, and cleaning by exchanging containers ■ Soft mixing prevents powdering of granulated materials and does not damage the materials ■ Easy to change rotation speed and set the timer on the touch panel ■ Safety cover with interlock *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator
• Other powder equipment

The "Ball Magfilter" is a magnetic separation device for liquids that has numerous magnetization points across a low surface area. By arranging the balls to align with the liquid flow path, it efficiently captures metals. By removing the external magnet, the balls inside the piping lose their magnetic force, making cleaning easy. 【Features】 ■ Balls are arranged to align with the liquid flow path, efficiently capturing metals ■ The wetted parts are made of casing SUS316L, and the balls are made of SUS440C ■ Surface magnetic flux density ranges from 0.3T to 0.7T at various locations ■ Custom design and manufacturing to fit the line are possible *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine
• Other powder equipment

The "LDS-200/LDS-200EX" is a liquid drum shaker that can gently stir liquid materials inside a drum. By rotating the drum slowly in a 360° vertical direction, it stirs the contents. It can be used for re-stirring sediments or for cleaning purposes by adding cleaning solutions inside the drum. Drums can be easily set up with simple operation. It is equipped with an interlock mechanism for safety measures. 【Features】 ■ Gently stirs liquid materials inside the drum ■ Easy operation for setting up the drum ■ Safety measures (interlock) ■ Pressure-resistant explosion-proof specifications are also available *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

Here is a case study of the delivery of a "bottom discharge drum mixer." Our strength lies in "rotating commercial containers!" However, this customer requested that the mixer not be removed and that the mixed materials be received in a separate container at the bottom. Therefore, we manufactured it according to their wishes. Since the bottom is designed to receive mixed materials in a collection container, it has a considerable height, requiring a step stool or similar for material input. The input and mixing are done using an inclined position. With this specification, materials can be input from upstream, mixed, and then sent downstream, allowing for a batch continuous process to be set up as a line. We will work with the customer to tailor the usability to their specific applications. [Case Study] ■ Product: Bottom discharge drum mixer (Material: Ceramic-based powder mixing) ■ Request: To receive mixed materials in a collection container at the bottom *You can view the comprehensive catalog of Eishin via PDF download.

• Mixer/agitator
• Contract manufacturing

We would like to introduce the "Mag Filter Insertion Guide" that we handle. The Mag Filter is designed to remove metal foreign objects, but there is a possibility that wear powder may be generated when the magnet is attached and detached from the casing due to friction. Especially for high magnetic force Mag Filters used for liquids, the clearance is narrow to consider removal efficiency, and over time, the casing can become magnetized, causing the magnet to be attracted to the casing during insertion. Therefore, this product should be attached to the casing before inserting the magnet, allowing for a smooth insertion afterward. This helps reduce the risk of wear powder generation and also effectively minimizes the risk of scratches on the magnet part that can occur during insertion. 【Features】 ■ Reduced risk of wear powder generation ■ Reduced risk of scratches on the magnet part ■ Usable with your currently used Mag Filter *You can view the comprehensive catalog of Eishin via PDF download.

• filter

Here is an example of a delivered "Volume (Gas Quantity) Measurement Unit for LIB Development." We received a request from a customer asking, "Could you create an automatic device to measure volume using Archimedes' principle?" Previously, they placed a container filled with water on an electronic scale and suspended the item to be measured with a wire to weigh it. Since the value they wanted to measure was in increments of 0.0001g, they found it difficult to measure due to hand tremors and expressed a desire to automate the process using a cylinder. The position where the electronic scale descends can be adjusted by moving the scale. We made it possible to adjust the height near the cylinder. Additionally, we accommodated their request to integrate the data into a computer, resulting in a device that met the customer's specifications. 【Example】 ■Product ・Volume (Gas Quantity) Measurement Unit for LIB Development ■Requests ・Automate the part where weight was measured by suspending with a wire using a cylinder ・Integrate with a computer *You can view the comprehensive catalog of Eishin via PDF download.

• Other measurement, recording and measuring instruments
• Contract manufacturing

Our "Tumbler Mixer" is widely used by customers in the resin molding industry. This time, we received a request to conduct a test on mixing resin pellets and powdered pigments (dry color). The test machine is the "Tumbler Mini TMC-20 (container capacity 20L)," and the mixture consists of 2kg of PP pellets (pre-treated with blend oil) and 12g of powdered pigment. The results were favorable, and we received an immediate order, which is currently in production. One disadvantage of using powdered pigments in resin molding is "spillage," but based on the customer's idea, we are currently producing a custom specification to prevent spillage during the injection into the molding machine. [Case Study] ■ Test Machine - Tumbler Mini TMC-20 (container capacity 20L) ■ Mixture - 2kg of PP pellets (pre-treated with blend oil) and 12g of powdered pigment - 5kg of PP pellets (pre-treated with blend oil) and 28g of powdered pigment *You can view Aisin's comprehensive catalog via PDF download.

• Mixer/agitator
• Contract manufacturing

We have delivered a "Portable Mag Filter" that can be easily transported anywhere. The magnet is placed on a frame with casters. It is convenient to move and use when the line is not fixed in one location, such as when transferring materials through the magnet. This time, due to the large diameter, the magnet is arranged in a split configuration to consider the weight that a person can carry, and there is a partition in the middle. We often hear requests to use the magnet in various locations. We can design it according to your specifications, so please feel free to consult us. 【Example】 ■Product ・Portable Mag Filter ■Features ・The magnet is placed on a frame with casters ・Can be used even before loading raw materials into the tank with a tumbler mixer *You can view Aisin's comprehensive catalog by downloading the PDF.

• filter
• Contract manufacturing

Here is a case study of the delivery of a "tumbler mixer." For a major household goods manufacturer, we have been using the standard tumbler for several years, and it has been operating smoothly. This time, however, it was delivered with a custom container design that takes into account the connection to downstream equipment for a new plant. The raw material input and discharge operations vary by customer. We will make proposals that align as closely as possible with your requests, so please feel free to consult with us. [Case Study] ■ Product - Tumbler Mixer ■ Requirements - For a new plant - Custom container design considering connection to downstream equipment - Safety fence with punching specifications * You can view Aishin's comprehensive catalog via PDF download.

• Mixer/agitator
• Contract manufacturing

We conducted a "dry powder test" at our factory in Hiroshima to dissolve approximately 100 kg of calcium chloride plus α in 60 kg of water. The drum mixer (DMH200) was rotated vertically without any inclination. After adding 60 kg of water, we introduced just over 100 kg of granular calcium chloride. After 30 minutes, we scooped from the bottom with a ladle and found that it had dissolved well. We then added another type of powder and rotated for another 30 minutes, after which it was removed with no residue left and was discharged cleanly. The analysis showed no issues. We felt the advantages of stirring in the drum, such as: - "Handling and storing directly in the drum after dissolution" - "The drum shape makes it easy to clean the container" - "No need to clean the stirrer" We offer free testing at our facility, so please feel free to consult us! 【Case Study】 ■ Test Objective: Dissolve approximately 100 kg of calcium chloride plus α in 60 kg of water ■ Product Used: Drum Mixer (DMH200) *You can view the comprehensive catalog of Eishin via PDF download.

• Mixer/agitator
• Contract manufacturing

A customer consulted us about wanting to automatically and regularly measure the bulk density of powder in the production line. Due to the natural origin of the raw materials and varying moisture levels, they wanted to measure the bulk density at each stage of the process to stabilize product quality and quickly change the conditions of the previous process in case of abnormalities. There were considerations for various sizes of powders, including fine powders and those the size of rice grains in pellet form. In particular, when pellets are forced to be leveled off, there was an occurrence where they got pinched between the edges of the container and could not be leveled properly. Therefore, we developed a semi-automatic testing machine that can confirm the leveling and reproducibility. The testing machine is located at our Goikaichi factory. If you are interested, we would be happy to discuss it with you. [Case Study] ■ Machine Produced: Automatic Bulk Density Measurement Device ■ Purpose of Equipment Introduction Consideration - More frequent measurements than the current situation - Logging and alarms, labor-saving, and eliminating variations in measurements by personnel * Eishin's comprehensive catalog can be viewed via PDF download.

• Other measurement, recording and measuring instruments
• Contract manufacturing

We would like to introduce our "Screw Conveyor." This product features a weighing machine that operates on an additive basis, with a dual-axis system consisting of a large screw and a small screw. Initially, both screws move, and just before reaching the set weight, the large screw stops while the small screw continues to supply accurately and stops at the set value. Our company's unique feature is that we design and manufacture in-house while considering cost-effectiveness according to the characteristics of the powder, and we can also propose a wide range of products from specialized manufacturers, accommodating both options. Our factory is equipped with a weighing machine and a test machine with a bridge breaker. We also accept test requests, so please feel free to consult with us. 【Features】 ■ The weighing machine operates on an additive basis with a dual-axis system of a large screw and a small screw. ■ The large screw stops just before the set weight, while the small screw supplies accurately and stops at the set value. *You can view the comprehensive catalog of Eishin via PDF download.

• Contract manufacturing
• Conveyor

We manufacture custom belt conveyors. When a belt conveyor deviates from standard specifications and becomes custom-made, it can suddenly become expensive. The projects designed and delivered in-house have all been tailored to fit through narrow spaces, in Z-shapes, or adapted to the customer's layout, and have been adopted accordingly. Starting with a "conveyor for bonito flakes" that features innovative mounting methods, we also have a track record of designing and delivering a complete set of equipment for highly adhesive and cohesive powders, including "dual-axis screw conveyors," "Z-type belt conveyors," and "magnet-equipped crushers." 【Features】 ■ Proposals tailored to the customer's layout ■ Accumulated know-how ■ Capable of accommodating connections at both ends *You can view the comprehensive catalog of Eishin via PDF download.

• Contract manufacturing
• Conveyor

The "Tumbler Mini (SUS Specification)" is a compact mixer that uses stainless steel, which excels in corrosion resistance and water resistance, for the main body and holder section. By utilizing centrifugal force for mixing and stirring, it can process materials uniformly without damaging them. It allows for the easy attachment and detachment of commercially available containers, facilitating differentiation by material and transportation to the next process. The main body features a structure without bearings that eliminates the need for maintenance such as greasing, and its excellent cleanability makes it suitable for use in food factories and clean rooms. 【Features】 ■ All SUS specification ■ Compatible with commercially available sealed tanks, helping to reduce container costs ■ Ideal for prototyping and sample creation ■ Easy to operate ■ Optional features such as safety covers and casters can also be produced *For more details, please refer to the product catalog. Feel free to contact us with any inquiries.

• others

This text explains the "bulk density (bulk density, apparent density)" necessary for selecting tumbler mixers and ball mills. On the external link page, we introduce a simple method for anyone to measure bulk density. There are also specialized instruments available for accurately measuring material properties. We can provide a quote, so please feel free to contact us. *You can view Aisin's comprehensive catalog via PDF download.

• Other measurement, recording and measuring instruments
• Contract manufacturing