TSP Product Lineup

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of over -8°C (varies depending on the environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air consumption: 28ℓ/min, water consumption is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

TSP Corporation offers the "Cool Mist Line/Mist Cooler ALL-Round." The "Cool Mist Line" uses mist that does not wet products or workers, making it suitable for factory environments where getting wet is a concern. Additionally, the "Mist Cooler ALL-Round" is designed for forklifts and aerial work platforms, providing an expected cooling effect of over -8°C on average. 【Features of the Cool Mist Line】 ■ Ultra-fine particles with an average diameter of 15μm create a cooling effect through rapid vaporization ■ Provides site cooling of over -8°C during summer ■ Can be installed in minimal space as it is set up in the area ■ Achieves low initial and running costs ■ Significantly reduces electricity costs *For more details, please download the PDF or feel free to contact us.

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options) (water tank is optional). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of electricity for the compressor, achieving about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation area. ★ Both initial and running costs can be kept low. Air usage: 28ℓ/min, water usage is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (demo units are also available for loan).

This is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides site cooling of over -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature dropped from 40°C to 27°C depending on the installation environment. ★ It can be installed in a space, requiring minimal space for installation. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 5L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for approximately 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

It is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be realized at a low price. Air usage: 28ℓ/min, water usage is from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

Creating a comfortable environment for customers at terrace seats in restaurants is essential. Especially during the summer, the heat during the day can often deter customers. Improving the comfort of terrace seating significantly impacts sales. Our mist cooler provides coolness by utilizing evaporative cooling without getting wet, creating a space where customers can enjoy their time comfortably. 【Usage Scenarios】 - Terrace seats in restaurants - Outdoor café spaces - Beer gardens 【Benefits of Implementation】 - Increased customer satisfaction - Higher average spending per customer - Improved store image

Heatstroke measures for all workers outdoors and indoors! Mist cooler that cools through evaporative cooling without getting wet! Cooling effect of over -8℃ on average!

For those working in factories, the summer heat and winter cold are unavoidable challenges. In recent years, record-breaking heatwaves have continued, making temperature management on-site a priority management issue for companies. With the revision of the Labor Safety and Health Regulations (OSH Regulations) in 2025, some measures are being elevated from "efforts" to "obligations," and national regulations are being strengthened. Our Cool Mist Line effectively lowers the temperature on-site without wetting products or workers, contributing to quality maintenance. 【Usage Scenarios】 - Temperature management in food processing lines - Humidity and temperature control in beverage manufacturing lines - Temperature reduction in product storage areas - Heatstroke prevention for workers 【Benefits of Implementation】 - Stabilization of product quality - Improvement of manufacturing environment comfort - Reduction of running costs - Space-saving installation