新明工業 List of Products and Services

Press-fit the center tube into the cylinder head. The application of Loctite on the outer diameter of the center tube can be confirmed with a color sensor, and pressure and stroke can be checked with a servo press. <Specifications> Assembly points: 4 locations Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860 mm Equipment size: Depth 3950 mm × Width 1250 mm × Height 2030 mm Primary air: 0.3 MPa 3/8 Primary power supply: 200V 11.3 KVA

Press-fitting the plug tube into the cylinder head. Locktite application is confirmed with an outer diameter color sensor and an inner diameter image inspection. Pressure and stroke can be checked with a servo press. <Specifications> Number of assembly points: 4 Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860 mm Equipment size: Depth 4150 mm × Width 1950 mm × Height 2030 mm (total length of the transport section is 1650 mm)

This is a device for automatic insertion of couplers. The coupler set is done manually. The insertion stroke is performed by a servo press, and the insertion load is monitored by a load cell. 〈Specifications〉 ■ Insertion load: 500N ■ Servo press: PCT25R-04N-0150 (THK) ■ Load cell: UNBF-500N (Unipulse)

We introduce various types of press-fitting machines suitable for vehicle assembly lines. Press-fitting of the bushings (cushions) at the connection points of the front and rear suspension members to the body. Compatible with hydraulic and electric systems, ensuring safety with various covers and sensors. 【Specifications】 ■ Machine size: Depth 1100mm × Width 1100mm × Height 1400mm ■ Press-fitting source: Hydraulic / Electric press ■ Press-fitting cycle: 15 seconds to 65 seconds ■ Press-fitting load: 100kN *For more details, please refer to the PDF document or feel free to contact us.

A workbench for manual bolt fastening. The bolts are designed for horizontal fastening, with a balance arm to assist with weight. The workpiece is lifted and rotated 90 degrees to face the fastening point forward.

We introduce various fastening devices suitable for vehicle assembly lines. Tightening operations for body and suspension components are carried out. Various fastening tools can be combined with nut runners. There are simple types using aluminum erectors and types equipped with coil compression functions. 【Specifications】 ■ Machine size: Depth 1650mm × Width 700mm × Height 1600mm ■ Tightening torque: 216–294 N·m ■ Nut runner: Atlas Copco *For more details, please refer to the PDF document or feel free to contact us.

The "crimping machine" is a lid assembly machine suitable for battery assembly lines. It stops the assembly jig at a designated position and performs the crimping process and work transfer to the carrier. Variations are measured using a contact-type displacement sensor, and adjustments to the crimping height are made. 【Overview】 <Specifications> ■ Cycle time: 3s per unit ■ Size: Width 2990mm × Height 2050mm × Depth 1374mm <Main Equipment Used> ■ Assembly jig transport: LCM-X ■ Crimping units: 3 units *For more details, please refer to the PDF document or feel free to contact us.