新明工業 List of Products and Services

The "Medium Load Chain Conveyor" is a transport device suitable for E/G processing lines. It directly drives the transport chain with a motor, allowing for transport at a constant speed. By changing the chain pitch, it can also accommodate variations in width. 【Specifications】 ■ Load capacity: 100kg ■ Length: 700–10000mm ■ Height: 300–1500mm ■ Width (chain pitch): 100–400mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min [MAX] ■ Chain type: RF50 *For more details, please refer to the PDF document or feel free to contact us.

The "90-Degree Direction Change Device for Medium Loads (Chain Type)" is a conveyor suitable for E/G processing lines. It directly applies motor drive to the conveyor chain, transporting at a constant speed while allowing a 90-degree change in direction. By changing the chain pitch, it can also accommodate variations in width. 【Specifications】 ■ Load Capacity: 100kg ■ Turning Diameter: φ700 to φ900 ■ Height: 700 to 1200mm *For more details, please refer to the PDF document or feel free to contact us.

The "Multi-Row Stock Conveyor" is a transport device suitable for E/G processing lines. By installing a stopper on a conveyor that uses a chain capable of accumulating, it is possible to hold the transported items. 【Specifications】 ■ Load capacity: 200kg per row ■ Length: 2500 to 5000mm ■ Height: 800 to 1000mm ■ Width (chain pitch): 250 to 400mm ■ Number of rows: 1 to 3 rows ■ Chain type: KCM2060H-2 top roller *For more details, please refer to the PDF document or feel free to contact us.

The "180-Degree Rotation Machine" is a conveyor suitable for the E/G processing line. The conveyor speed is 12m/min, and the load capacity is 60kg. It can transport items while rotating them 180 degrees up and down along with the conveyor. 【Specifications】 ■ Load capacity: 60kg ■ Machine length: 730mm ■ Machine height: 900–1200mm ■ Machine width: 1400mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Light Load Passage Direction Change Device" is a conveyor suitable for E/G processing lines. It rotates rollers driven by a chain, transporting at a constant speed. During direction changes, manual operation is also possible, and it has safety measures in place that stop the device if a force exceeding a certain level is applied. 【Specifications】 ■ Load capacity: 60kg ■ Length: 1300mm ■ Height: 900, 1100mm ■ Turning radius: R1100mm ■ Passage width: 600mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Light Load Driven Roller Conveyor" is a transport device suitable for E/G processing lines. It rotates the rollers through chain drive, allowing for transportation at a constant speed. By specifying the length and height, it can be manufactured in a short delivery time. 【Specifications】 ■ Load capacity: 60kg ■ Length: 700, 850mm ■ Height: 900, 1100mm ■ Width: 500mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Light Load 90-Degree Direction Change Device" is a conveyor suitable for E/G processing lines. It operates with a chain drive to rotate the rollers and conveys at a constant speed. It can change direction by 90 degrees, and if a force exceeding a certain level is applied during the direction change, it will stop as a safety measure. 【Specifications】 ■ Load capacity: 60kg ■ Turning diameter: φ700mm ■ Height: 900, 1100mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Light Load Free Roller Conveyor" is a transport device suitable for E/G processing lines. After manually loading the items onto the conveyor, necessary tasks such as quality checks are performed on the conveyor, and then the items are manually unloaded for the next process. It does not have its own power source. 【Specifications】 ■ Load capacity: 30kg ■ Length: 700, 850mm ■ Height: 900, 1100mm ■ Width: 500mm *For more details, please refer to the PDF document or feel free to contact us.

The "Light Load Traverser" is a transport device suitable for E/G processing lines. It is capable of moving the SS Kudo RC laterally. The conveyor has safety measures in place that stop operation when a force exceeding a certain level is applied. 【Specifications】 ■ Load capacity: 60kg ■ Stroke: 3000mm ■ Height: 900–1100mm ■ Motor specifications: AC200V induction motor *For more details, please refer to the PDF document or feel free to contact us.

"Lift & Carry" is a transport device suitable for the E/G processing line. There are two types available: 450st and 550st. It can transport shaft items using the lift and carry method. 【Specifications】 ■ Load capacity: 30kg ■ Motor specifications: AC200V induction motor ■ Types ・450st ・550st *For more details, please refer to the PDF document or feel free to contact us.

The "Flat Stock" is a conveyor suitable for the E/G processing line. It features a lifting servo motor with a control mechanism. It can stock cylindrical items on a flat surface using an air cylinder. 【Specifications】 ■ Load capacity: 30kg per unit ■ Motor specifications: AC servo ■ Stroke: up to 3000st *For more details, please refer to the PDF document or feel free to contact us.

The "Yagen Conveyor" is a transport device suitable for the E/G processing line. It is equipped with an inverter and an AC 200V induction motor. By using this product, which can operate in both forward and reverse directions, you can stock cylindrical items. 【Specifications】 ■ Load capacity: 30kg per unit ■ Motor specifications: AC 200V induction motor with inverter ■ Stock quantity: up to 15 units *For more details, please refer to the PDF document or feel free to contact us.

The "Belt-Type Pusher" is a conveyor suitable for E/G processing lines. It transports items using a push method on a free roller conveyor. To ensure that excessive torque is not generated, a torque guard is employed in the drive unit, ensuring safety. 【Specifications】 ■ Pushing Force: 70N ■ Motor Specifications: AC200V Induction Motor ■ Belt: Sprocket Belt *For more details, please refer to the PDF document or feel free to contact us.

The "Medium Load Drive Roller Conveyor" is a transport device suitable for E/G assembly lines. It rotates the rollers through belt drive, allowing pallets to be transported at a constant speed. Since it uses rollers, it can accommodate changes in pallet width. 【Specifications】 ■ Load capacity: 60kg ■ Pallet width: 300–500mm ■ Pallet length: 250–500mm ■ Motor specifications: AC200V induction motor ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Clean Room Chain Conveyor" is a transport device with a load capacity of 20kg. The transport method is chain-based. It is suitable for transporting items such as batteries due to its compatibility with clean rooms. 【Specifications】 ■ Load capacity: 20kg ■ Pallet width: up to 250mm ■ Pallet length: up to 700mm ■ Motor specifications: AC200V induction motor ■ Chain: resin chain ■ Conveyor length: up to 6000mm ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "90-Degree Direction Change Device for Clean Rooms" is a transport device suitable for clean rooms, ideal for transporting items such as batteries. It can transport items by changing the direction of travel by 90 degrees. It is equipped with safety measures that stop the device when a certain amount of force is applied. 【Specifications】 ■ Load capacity: 20kg ■ Pallet width: up to 250mm ■ Pallet length: up to 700mm ■ Motor specifications: AC200V induction motor ■ Chain: resin chain ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Direction Change Device for Clean Room Passage" is a transport device suitable for clean rooms, ideal for transporting items such as batteries. It can also be used as a passage, allowing the conveyor to be opened and closed manually. 【Specifications】 ■ Load capacity: 20kg ■ Pallet width: up to 250mm ■ Pallet length: up to 700mm ■ Motor specifications: AC200V induction motor ■ Chain: resin chain ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Stock Conveyor for Clean Rooms" is a conveying machine suitable for transporting items like batteries in clean room environments. It uses a free flow chain, allowing for pallet storage as well. 【Specifications】 ■ Load capacity: 200kg ■ Pallet width: up to 700mm ■ Pallet length: up to 500mm ■ Motor specifications: AC200V induction motor ■ Chain: RS40-LMC-NP-1LSRP-T ■ Conveyor length: up to 6000mm ■ Conveyor speed: 12m/min *For more details, please refer to the PDF document or feel free to contact us.

The "Clean Room Stopper" is suitable for clean rooms and is ideal for the delivery of batteries and other items. It has a load capacity of 200kg and uses an air cylinder. It is used in combination with a stock conveyor. 【Specifications】 ■ Load capacity: 200kg ■ Uses air cylinder *For more details, please refer to the PDF document or feel free to contact us.

The "Leak Full Length Measuring Machine" is an assembly machine suitable for hydrogen tank assembly lines. It inspects the leak (leakage) of the tank (liner assembly) while measuring the full length of the workpiece. 【Specifications】 ■ Equipment size: Width 4060mm × Depth 1620mm × Height 1500mm ■ Cycle time: 238 seconds ■ Conveying height: 620mm ■ Tank length: Compatible with 680 to 1470mm *Automatic size change ■ Tank outer diameter: φ300mm ■ Full length measuring machine ・ Minimum detectable object: 0.3mm ・ Measurement accuracy: ±0.15μm *For more details, please refer to the PDF document or feel free to contact us.

The "Anti-adhesion Agent Coating Machine" is suitable for the hydrogen tank assembly line. The transport height is 620mm, and it accommodates tank lengths from 680 to 1470mm. It applies an anti-adhesion agent to the surface of the tank (liner assembly) and dries it. 【Specifications】 ■ Equipment size: Width 5110mm × Depth 3850mm × Height 1900mm ■ Cycle time: 238 seconds ■ Transport height: 620mm ■ Tank length: Accommodates 680 to 1470mm *Automatic size change ■ Tank outer diameter: φ300mm ■ Heater capacity: 20kW × 3 units *Air supply uses factory air ■ Primary power supply: AC200V 80KVA ■ Air pressure: 0.35 to 0.5MPa *For more details, please refer to the PDF document or feel free to contact us.

The "FW Fiber End Processing Machine" is suitable for hydrogen tank assembly lines. It accommodates tank lengths from 680 to 1470 mm, and tank outer diameters up to φ300 mm. The end parts of the FW fibers are partially cured with heat to prevent fiber peeling. 【Specifications】 ■ Equipment size: Width 3100 mm × Depth 2900 mm × Height 1500 mm ■ Cycle time: 374 seconds ■ Conveying height: 620 mm ■ Tank length: Accommodates 680 to 1470 mm *Automatic size change ■ Tank outer diameter: Accommodates up to φ300 mm ■ Primary power supply: AC200V 8.6KVA ■ Air pressure: 0.35 MPa *For more details, please refer to the PDF document or feel free to contact us.

The "adhesive application machine" is suitable for the hydrogen tank assembly line. The cycle time is 238 seconds, and the work set height is 900mm. Adhesive is applied inside the protective layer (protector). 【Specifications】 ■ Equipment size: Width 1000mm × Depth 3250mm × Height 1600mm ■ Cycle time: 238 seconds ■ Work set height: 900mm ■ Protective layer size: φ300mm ■ Application machine: Single-component quantitative booster (maximum discharge volume 17cc) ■ Primary power supply: AC200V 3.6KVA *For more details, please refer to the PDF document or feel free to contact us.

The "Protective Layer Assembly Machine" is suitable for hydrogen tank assembly lines. It accommodates tank lengths from 680 to 1470 mm and external diameters up to φ300 mm. The protective layer (protector) is assembled at two locations on the E.V. side, at both ends of the tank. 【Specifications】 ■ Equipment size: Width 4400 mm × Depth 1510 mm × Height 1500 mm ■ Cycle time: 238 seconds ■ Conveying height: 620 mm ■ Tank length: Accommodates from 680 to 1470 mm *Automatic size change ■ Tank external diameter: Accommodates up to φ300 mm ■ Tank weight: 50 kg ■ Primary power supply: AC200V 9.4KVA *Airless specification *For more details, please refer to the PDF document or feel free to contact us.

The "Collecting Terminal Assembly Machine" is suitable for battery assembly lines. It features a high-speed transport system using a linear conveyor module. The assembly jig can be stopped at any position to perform the assembly of collecting terminals, as well as the assembly and press-fitting of gaskets and covers. 【Overview】 <Specifications> ■ Cycle Time: 3s per unit ■ Size: Width 547mm × Height 1900mm × Depth 2805mm <Main Equipment Used> ■ Jig Transport: LCM-X ■ Parts Feeder: 1 unit (gasket) ■ Scara Robot: 3 units (collecting terminal positive and negative poles, cover) YK600XGH-200-F ■ Image Processing Camera: 1 unit (cover assembly) *For more details, please refer to the PDF document or feel free to contact us.

The "Insulator and Z Terminal Assembly Machine" is suitable for battery assembly lines. It allows the assembly jig to stop at any position to perform insulator assembly and press-fitting, bolt assembly, and Z terminal assembly. It features a high-speed transport system using a linear conveyor module. 【Overview】 <Specifications> ■ Cycle Time: 3s per unit ■ Size: Width 5396mm × Height 1900mm × Depth 2800mm <Main Equipment Used> ■ Assembly Jig Transport: LCM-X ■ Parts Feeders: 3 units (insulator positive and negative terminals, bolts) ■ Scara Robots: 2 units (YK600XGH-200-F for Z terminal positive and negative terminals) ■ Image Processing Cameras: 2 units (for Z terminal positive and negative assembly) *For more details, please refer to the PDF document or feel free to contact us.

The "crimping machine" is a lid assembly machine suitable for battery assembly lines. It stops the assembly jig at a designated position and performs the crimping process and work transfer to the carrier. Variations are measured using a contact-type displacement sensor, and adjustments to the crimping height are made. 【Overview】 <Specifications> ■ Cycle time: 3s per unit ■ Size: Width 2990mm × Height 2050mm × Depth 1374mm <Main Equipment Used> ■ Assembly jig transport: LCM-X ■ Crimping units: 3 units *For more details, please refer to the PDF document or feel free to contact us.

The "buffer conveyor" is suitable for battery assembly lines. It can store a buffer to accommodate stoppages due to component exchanges between the front and rear equipment in the lid assembly process of lithium batteries. 【Specifications】 ■ Cycle time: 3s/unit ■ Size: Width 1900mm × Height 1104mm × Depth 755mm ■ Maximum carrier stock number: 60 *For more details, please refer to the PDF document or feel free to contact us.

This product is a cleaning machine suitable for battery assembly lines. It removes foreign substances attached to parts using air blow, and cleans the workpiece by inverting it and using 15 air nozzles. The sealed structure allows air to flow from the top to the bottom, preventing dust from reattaching. 【Specifications】 ■ Cycle time: 3s/piece ■ Size: Width 2865mm × Height 2066mm × Depth 1520mm ■ Air blow nozzles: 15 *For more details, please refer to the PDF document or feel free to contact us.

This product is an integrated machine suitable for battery assembly lines. It disassembles 10 layers of empty containers step by step, packs the completed lid parts into containers, and then stacks them back into 10 layers for dispatch. 【Specifications】 ■ Cycle time: 3s/item (54 items per container) ■ Size: Width 3784mm × Height 1800mm × Depth 1956mm ■ Number of empty containers to be input: 20 (10 layers × 2 stacks) ■ Number of completed containers on standby: 20 (10 layers × 2 stacks) *For more details, please refer to the PDF document or feel free to contact us.

The "Rear Suspension Assembly Device & Conveyor" is suitable for vehicle assembly lines. It can accommodate various configurations, including loop type, reciprocating type, and combinations with various fastening tools and nut runners. The rear suspension and engine assembly are mounted on the suspended body. 【Specifications】 ■ Machine Size: Depth 2500mm × Width 1500mm × Height 600mm ■ Lifter Stroke: 1200mm H = 650mm to 1850mm ■ Lifter: Hydraulic type / Electric type ■ Lifter Capacity: 2500kgf ■ Travel Speed: 500mm/s ■ Lifting Speed: 250mm/s *For more details, please refer to the PDF document or feel free to contact us.

We introduce various fastening devices suitable for vehicle assembly lines. Tightening operations for body and suspension components are carried out. Various fastening tools can be combined with nut runners. There are simple types using aluminum erectors and types equipped with coil compression functions. 【Specifications】 ■ Machine size: Depth 1650mm × Width 700mm × Height 1600mm ■ Tightening torque: 216–294 N·m ■ Nut runner: Atlas Copco *For more details, please refer to the PDF document or feel free to contact us.

We introduce various types of press-fitting machines suitable for vehicle assembly lines. Press-fitting of the bushings (cushions) at the connection points of the front and rear suspension members to the body. Compatible with hydraulic and electric systems, ensuring safety with various covers and sensors. 【Specifications】 ■ Machine size: Depth 1100mm × Width 1100mm × Height 1400mm ■ Press-fitting source: Hydraulic / Electric press ■ Press-fitting cycle: 15 seconds to 65 seconds ■ Press-fitting load: 100kN *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Oil Injection Device & Guarantee Device" suitable for vehicle assembly lines. The "Oil Injection Device" injects various oils from the oil supply room or drums into the transaxle, transfer case, differential, etc. The "Oil Guarantee Device" checks for the presence of oil using a fiber sensor. 【Specifications】 ■ Machine Size: Depth 1500mm × Width 670mm × Height 1800mm ■ Power Source: Air (High Pressure 0.6MPa, Low Pressure 0.3MPa) ■ Injection Cycle (Approx.): 4000g (just under 5000cc) in 12 seconds at high pressure, 15 seconds at low pressure ■ Injection Gun: The nozzle part is designed according to the target work each time *For more details, please refer to the PDF document or feel free to contact us.

The "trolley transport conveyor" is suitable for vehicle assembly lines. It connects the preparation trolley and ribbon steel, driving the ribbon steel by pinching it with polyurethane rollers, allowing for various layouts and combinations of continuous feeding and STOP & GO. Additionally, it is a patented product. 【Specifications】 ■ Pulling capacity: approximately 100 kgf with a 0.2 kW reducer ■ Transport speed: 250 mm/s ■ Minimum conveyor height: 200 mm *For more details, please refer to the PDF document or feel free to contact us.

The "jig pallet transport conveyor" is suitable for vehicle assembly lines. It can accommodate various types according to specifications, such as free flow conveyors and roller conveyors. It is a heavy-duty type designed to transport jig pallets. 【Specifications】 ■Transport speed: MAX 250mm/s ■Transport capacity: MAX 700kg ■Conveyor length: 4000mm *For more details, please refer to the PDF document or feel free to contact us.

The "Alignment Adjustment Device" is suitable for vehicle assembly lines. It reproduces the loaded state (coil compression) to measure the wheel's camber angle and caster angle, and adjusts and tightens the cam bolts. There is a lineup of both automatic and manual machines. 【Specifications】 ■ Machine size: Depth 6000mm × Width 3850mm × Height 1600mm ■ Work input method: Loader automatic input ■ MAX tact (adjustment time): 31 seconds *For more details, please refer to the PDF document or feel free to contact us.

This product is a cart suitable for vehicle assembly lines. It is used for preparation processes of various units before vehicle installation and can be combined with AGVs and our various preparation conveyors, as well as being used as a hand-pushed cart. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

The "Man Conveyor" is suitable for vehicle assembly lines. The belts are available in plastic and resin types. They transport people and carts at the same speed as the products in the flow process. 【Specifications】 ■ Width: up to 3000mm ■ Length: up to 50000mm ■ Speed: 100mm/s *For more details, please refer to the PDF document or feel free to contact us.

This product is a simple type of auxiliary lifting device that uses an air balancer, etc. It can lift items weighing up to 60 kg with a weight of 7 kg or less, and it is also compatible with air tank-mounted types. We offer various types including "suspension type," "ground traveling type," and "pole type (jib crane type)." 【Specifications】 ■ Machine size: Depth 800mm × Width 800mm × Height 820mm ■ Lifting stroke: 1000mm *For more details, please refer to the PDF document or feel free to contact us.

The "Flexible Caster" is suitable for vehicle assembly lines. By attaching it to a hand-pushed cart loaded with heavy items, it can reduce the load during operation, such as the initial movement and aligning the direction when moving the cart forward or backward. 【Specifications】 <Wheel Type: Load Capacity / per unit> ■φ75: 80kg ■φ100: 100kg ■φ150: 150kg ■φ150 (Heavy Load Type): 500kg ■φ200: 500kg *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "jig pallet" suitable for vehicle assembly lines. These are trays for preparation processes and installation of various units such as rear suspension, engine, hydrogen tank, etc., before vehicle installation. 【Various Units】 ■ Front Suspension ■ Rear Suspension ■ Engine ■ Fuel Tank ■ Hydrogen Tank, etc. *For more details, please refer to the PDF materials or feel free to contact us.

The "Steering Angle Inspection Device" is suitable for vehicle assembly lines. It measures the maximum steering angle of the vehicle's front tires and determines pass or fail. Additionally, it performs headlamp alignment, camera calibration, millimeter-wave learning, and rear millimeter-wave learning through the vehicle alignment mechanism. 【Specifications】 ■ Machine Size: Depth 6500mm × Width 3000mm × Height 2000mm ■ Allowable Axle Load: 1500kgf for both front and rear wheels ■ Wheelbase Compatibility Range: 2400mm to 3200mm ■ Tread Compatibility Range: 1350mm to 1650mm ■ Tire Steering Angle Compatibility Range: ±50° ■ Vehicle Alignment Accuracy: ±0.5° ■ Measurement Accuracy: ±0.1° *For more details, please refer to the PDF document or feel free to contact us.

The "Side Slip Inspection Device" is suitable for vehicle assembly lines. It measures the lateral slip of the tires during straight driving and determines pass or fail. The allowable axle weight is MAX 1500kgf, and the measurement range is 0±10mm/m. 【Specifications】 ■ Machine size: Depth 1500mm × Width 2500mm × Height 350mm ■ Allowable axle weight: MAX 1500kgf ■ Tread compatibility range: 1400mm to 1750mm ■ Measurement range: 0±10mm/m ■ Measurement accuracy: Front and rear wheel stress during vehicle operation ±0.1m ■ Passing speed determination: Yes *For more details, please refer to the PDF document or feel free to contact us.

The "Headlight Inspection Device" is suitable for vehicle assembly lines. It checks the brightness and direction of the headlights and determines pass or fail. Adjustments are made automatically with specialized hand tools. The maximum vehicle passage width is 2400mm, and the compatible light sources for the headlamps are halogen, HID, and LED. 【Specifications】 ■ Machine size: Depth 2500mm × Width 3800mm × Height 2000mm ■ Focusing lens movement range - X-axis Original position 0–2400mm - Y-axis Original position ±250mm - Z-axis Original position 0–700mm ■ Vehicle passage width: MAX 2400mm ■ Measurement content: Headlamp optical axis height ■ Compatible light sources for headlamps: Halogen, HID, LED ■ Fog light compatibility: Available (optional) *For more details, please refer to the PDF document or feel free to contact us.