新明工業 List of Products and Services

The cylinder head is automatically transported and the roller rockers are assembled. Before assembly, the top surface of the head is inspected using images, and a check for missing stem end caps is conducted. <Specifications> Number of assembly points: 16 Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860 mm Equipment size: Depth 3000 mm × Width 1260 mm × Height 1660 mm (Total length of the transport section is 1000 mm) Primary air: 0.3 MPa 3/8 Primary power supply: 200V 7.9 KVA

Automatically transports the cylinder head and assembles the spark plugs. Three types of spark plugs can be switched, and image inspection of fuel system components is performed at the two stations. <Specifications> Number of assembly points: 4 Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860mm Equipment size: Depth 3050mm × Width 1600mm × Height 1830mm (Total length of transport section is 1440mm) Primary air: 0.3MPa 3/8 Primary power supply: 200V 7.2KVA

The cylinder heads are automatically transported with the pallet and the stem end caps are assembled. The rush adjuster is fed from the back of the equipment for assembly. <Specifications> Number of assembly points: 16 each, total of 32 points Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860mm Equipment size: Depth 3400mm × Width 1500mm × Height 1800mm Primary air: 0.3MPa 3/8 Primary power supply: 200V 11.8KVA

Automatically transport the cylinder head with the pallet and assemble the stem oil seal. Conduct image inspections to prevent INEX parts contamination and perform height inspections of the seals for all units. 〈Specifications〉 Assembly and inspection points: 16 each Cycle time: 54 seconds (including 10 seconds for loading and unloading) Transport height: 860mm Equipment size: Depth 3300mm × Width 1150mm × Height 1830mm Primary air: 0.3MPa 3/8 Primary power supply: 200V 15.5KVA

Remove the circuit board from the magazine for substrate transport and assemble it onto the workpiece on the pallet. The magazine loaded in the upper section will be discharged to the lower section when the circuit board is empty.

The "Protective Layer Assembly Machine" is suitable for hydrogen tank assembly lines. It accommodates tank lengths from 680 to 1470 mm and external diameters up to φ300 mm. The protective layer (protector) is assembled at two locations on the E.V. side, at both ends of the tank. 【Specifications】 ■ Equipment size: Width 4400 mm × Depth 1510 mm × Height 1500 mm ■ Cycle time: 238 seconds ■ Conveying height: 620 mm ■ Tank length: Accommodates from 680 to 1470 mm *Automatic size change ■ Tank external diameter: Accommodates up to φ300 mm ■ Tank weight: 50 kg ■ Primary power supply: AC200V 9.4KVA *Airless specification *For more details, please refer to the PDF document or feel free to contact us.

The "Collecting Terminal Assembly Machine" is suitable for battery assembly lines. It features a high-speed transport system using a linear conveyor module. The assembly jig can be stopped at any position to perform the assembly of collecting terminals, as well as the assembly and press-fitting of gaskets and covers. 【Overview】 <Specifications> ■ Cycle Time: 3s per unit ■ Size: Width 547mm × Height 1900mm × Depth 2805mm <Main Equipment Used> ■ Jig Transport: LCM-X ■ Parts Feeder: 1 unit (gasket) ■ Scara Robot: 3 units (collecting terminal positive and negative poles, cover) YK600XGH-200-F ■ Image Processing Camera: 1 unit (cover assembly) *For more details, please refer to the PDF document or feel free to contact us.

The "Insulator and Z Terminal Assembly Machine" is suitable for battery assembly lines. It allows the assembly jig to stop at any position to perform insulator assembly and press-fitting, bolt assembly, and Z terminal assembly. It features a high-speed transport system using a linear conveyor module. 【Overview】 <Specifications> ■ Cycle Time: 3s per unit ■ Size: Width 5396mm × Height 1900mm × Depth 2800mm <Main Equipment Used> ■ Assembly Jig Transport: LCM-X ■ Parts Feeders: 3 units (insulator positive and negative terminals, bolts) ■ Scara Robots: 2 units (YK600XGH-200-F for Z terminal positive and negative terminals) ■ Image Processing Cameras: 2 units (for Z terminal positive and negative assembly) *For more details, please refer to the PDF document or feel free to contact us.

This is equipment for automatically fastening two types of bolts for substrate fastening.

This is a workbench for manual assembly and bolt fastening. The bolts can be fastened horizontally. The nut runner can be held on the X-axis and Y-axis.

This is a workbench for manual assembly and manual bolt fastening. The nut runner is equipped with weight assistance from a spring balancer. <Specifications> Nut runner: NA979-C00-0 (Estic)

The "Rear Suspension Assembly Device & Conveyor" is suitable for vehicle assembly lines. It can accommodate various configurations, including loop type, reciprocating type, and combinations with various fastening tools and nut runners. The rear suspension and engine assembly are mounted on the suspended body. 【Specifications】 ■ Machine Size: Depth 2500mm × Width 1500mm × Height 600mm ■ Lifter Stroke: 1200mm H = 650mm to 1850mm ■ Lifter: Hydraulic type / Electric type ■ Lifter Capacity: 2500kgf ■ Travel Speed: 500mm/s ■ Lifting Speed: 250mm/s *For more details, please refer to the PDF document or feel free to contact us.