新明工業 Product Lineup

You can remove the workpiece from the pallet, apply FIPG, conduct visual inspection for FIPG application defects, assemble the workpiece, and perform bolt tightening.

The workpiece can be removed, FIPG applied, FIPG image inspection conducted, workpiece assembly performed, and bolt fastening executed. It is also equipped with a dispensing mechanism for when abnormalities are found during the FIPG image inspection. <Specifications> ■ Assembly Robot: VS068A4, 2 units coordinated control (Denso) ■ Fastening Robot: VM-60B1 (Denso) ■ Nut Runner: EH2-R0010-SC (NA979), 2 units (with automatic pitch switching) ■ Image Inspection: CA-H2100CC (Keyence) ■ FIPG: SCB-18-K-F-00 (ThreeBond) ■ Bolt Adhesion: Magnetic method

This is an automatic machine that can remove workpieces from the pallet, apply FIPG, conduct visual inspection for FIPG application defects, assemble workpieces, and tighten bolts.

Introducing the "Oil Injection Device & Guarantee Device" suitable for vehicle assembly lines. The "Oil Injection Device" injects various oils from the oil supply room or drums into the transaxle, transfer case, differential, etc. The "Oil Guarantee Device" checks for the presence of oil using a fiber sensor. 【Specifications】 ■ Machine Size: Depth 1500mm × Width 670mm × Height 1800mm ■ Power Source: Air (High Pressure 0.6MPa, Low Pressure 0.3MPa) ■ Injection Cycle (Approx.): 4000g (just under 5000cc) in 12 seconds at high pressure, 15 seconds at low pressure ■ Injection Gun: The nozzle part is designed according to the target work each time *For more details, please refer to the PDF document or feel free to contact us.

The "adhesive application machine" is suitable for the hydrogen tank assembly line. The cycle time is 238 seconds, and the work set height is 900mm. Adhesive is applied inside the protective layer (protector). 【Specifications】 ■ Equipment size: Width 1000mm × Depth 3250mm × Height 1600mm ■ Cycle time: 238 seconds ■ Work set height: 900mm ■ Protective layer size: φ300mm ■ Application machine: Single-component quantitative booster (maximum discharge volume 17cc) ■ Primary power supply: AC200V 3.6KVA *For more details, please refer to the PDF document or feel free to contact us.

The "Anti-adhesion Agent Coating Machine" is suitable for the hydrogen tank assembly line. The transport height is 620mm, and it accommodates tank lengths from 680 to 1470mm. It applies an anti-adhesion agent to the surface of the tank (liner assembly) and dries it. 【Specifications】 ■ Equipment size: Width 5110mm × Depth 3850mm × Height 1900mm ■ Cycle time: 238 seconds ■ Transport height: 620mm ■ Tank length: Accommodates 680 to 1470mm *Automatic size change ■ Tank outer diameter: φ300mm ■ Heater capacity: 20kW × 3 units *Air supply uses factory air ■ Primary power supply: AC200V 80KVA ■ Air pressure: 0.35 to 0.5MPa *For more details, please refer to the PDF document or feel free to contact us.