北海道ダイエィテック List of Products and Services

The Niagara Cut is a product designed to remove overhanging snow (snow eaves) from roofs and structures. Shipping is scheduled to begin in mid-December 2024. Its performance and workability are overwhelmingly different from conventional snow removal methods. 【Point: Overwhelming Work Efficiency】 Since the work is done from the ground, there is no need to climb onto the roof. The work is completed in three simple steps: 1. Extend the pole and surround the snow. 2. Store the pole and set the fittings. 3. Pull the rope and tighten it to release the snow. 【Comparison with Conventional Products】 - Exceeds the conventional limit of 7.0m, reaching up to 8.5m. - No need to repeatedly work with a pole. - A method that prevents injuries from falling snow. - Minimal physical exertion required. - Theoretical proof of high cutting performance for rope severance. 【Verified in Hokkaido's Heavy Snow Areas】 - Data is included in the catalog. 【Cost Reduction for Municipalities and Companies Involved in Snow Removal】 - Work time is faster than previous methods and products, allowing for an increase in work areas with a limited number of personnel. 【Possible Application for Heights Over 10m in Combination with Drones and Other Tools】 *Custom rope lengths are also available. Please consult us.

• Other work tools

This catalog introduces the waterproofing systems for pipe penetrations from FILOFORM, handled by Hokkaido Daiy Tech Co., Ltd. In addition to the foam resin mixed injection type "Filoform MD3/MD5," it also includes the compound filling type "Filosil Plus." You can choose from five types based on cost, performance, and workability. These systems can be used for flood prevention measures in new and existing locations as outlined in the R2.6 Ministry of Land, Infrastructure, Transport and Tourism publication "Guidelines for Flood Prevention Measures for Electrical Equipment in Buildings." [Contents (partial)] ■ Filoform Company ■ Five types to choose from ■ Filoform MD3 resin injection type ■ Excellent features of Filoform MD3 ■ Filoform MD5 resin injection type ■ Outstanding points of Filoform MD5 *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Philosheer Plus" from Philiform is the most balanced product in terms of work efficiency and waterproof airtight performance. It demonstrates high performance with a minimal number of components. The combination of a special urethane stopper and a one-component compound achieves a waterproof airtight performance of 1 atmosphere (1 bar). Furthermore, it has gas, chemical, and gasoline resistance, making it suitable for harsh environments. The urethane has a two-layer structure, integrating hard urethane (gray) and flexible urethane (light blue), which makes it easy to fix and fine-tune the position of cables. It can also be used multifunctionally for conduit and structural penetrations, featuring a simple construction method with fewer parts. With optional use, it can be installed even in environments where water is flowing. 【Features】 ■ Silicone compound offers excellent waterproof and airtight properties ■ Suitable for a wide range of single-core and CVT cables, as well as multi-core wires ■ Stoppers can be manually cut and adjusted according to conduit size ■ Usable in both horizontal and vertical directions ■ Cartridge-type compound simplifies the work process ■ Easy to work with and excellent in disassembly *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "Philosil Plus" and "Philosil Plus HD" from Philiform can be used in conjunction with this product to apply to leaking pipelines. This kit allows for the installation of waterproofing materials even during leaks, controlling the leakage with a combination of putty and a hose with a tap. It is specifically designed for Philosil Plus and Philosil Plus HD. 【Features】 ● This is a kit for applying waterproofing materials during pipeline leaks. ● It is specifically designed for Philosil Plus and Plus HD. ● It consists of putty, a drainage pipe, and a tap (faucet). ● The putty is non-hardening and can be disassembled. ● The putty does not emit toxic gases and is harmless to hands. ● The tap serves to divert flowing water outside and can be opened and closed. ● There are two methods of application: using putty alone or in combination with a nozzle. ● Water can be drained from the pipeline without pulling out the cable to leave the tap in place. *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "Philiform MD3" from Philiform Corporation is a product that offers better insertability of urethane blocks and workability of resin injection compared to other companies' waterproofing materials. It has water and gas tightness, preventing the intrusion of water and gases. It is a kit consisting of special circular urethane blocks and polyurethane resin, eliminating the need to wrap urethane around cables. By injecting and expanding the mixed resin into the space between the blocks, it achieves airtight performance of 1 bar (1 atmosphere). 【Features】 - Can be installed in non-circular shaped pipelines - Compatible with inner diameters from 25 to a maximum of 250 mm - No need for urethane wrapping around cables - Achieves waterproof airtightness by injecting and expanding the mixed resin into the space - The resin can be injected after removing the pack divider and connecting the nozzle after mixing - Mixing and injection work is simple and does not require much force *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The "Philosil Plus HD FIRE" from Philiform Co. provides easy and quick installation along with excellent waterproof airtightness and fire resistance. The airtight pressure resistance is a high specification of 2 bar (2 atmospheres). It has passed the fire resistance test specified by BS EN standard 1336-3 for 2 hours (up to 4 hours). With fewer components, it can be installed with simple work. It is resistant to chemical agents, hydrogen sulfide, methane, and other gases. High-quality waterproof airtight installation of conduits can be achieved without requiring specialized skills. 【Features】 ● Used for waterproof airtight fire resistance of conduit cables ● Suitable for conduit inner diameters from φ80mm to φ250mm ● Composed of hexagonal blocks and a one-component compound ● Includes cleaner, sandpaper, disposable gloves, and other items in the kit ● Applicable to single-core and multi-core wiring, as well as CVT cables, and can be installed in horizontal and vertical sections ● The hexagonal block provides a tensile strength of 100kg at the cable penetration point ● The one-component compound has excellent adhesion to cables and conduits ● The materials are flexible, absorbing conduit vibrations and cable contractions ● Harmless to the human body and does not use metals, preventing rust formation ● Can be disassembled

• Waterproof Connector

"MD Sealant" is a high-performance waterproof and fire-resistant filler that hardens in response to air (moisture) and maintains elasticity and flexibility even after curing. It is a silicone-based, fire-resistant, one-component compound designed for waterproof airtightness in openings, maintaining flexibility at temperatures ranging from -40 to 120°C while hardening and adhering to cables and general construction materials. It comes in a 310ml cartridge and is used by extruding it with an injection gun. The tip nozzle can be cut at any position, allowing for adjustment of the injection amount. It has excellent adhesion to cable sheaths and general building materials, hardening in response to moisture in the air. Additionally, it does not corrode metals and can be dismantled. [Features] - Silicone-based one-component filler with excellent waterproof, airtight, and fire-resistant properties - 310ml cartridge, used by extruding with an injection gun - Tip nozzle can be cut at any position for adjustable injection amounts - Excellent adhesion to cable sheaths and general building materials - Hardens in response to moisture in the air (hardening progresses in about 8 hours for a thickness of 1mm) - Cures flexibly (similar to a firm eraser) *For more details, please refer to the PDF document or feel free to contact us.

• glue

The Philiform Company’s "Philosil Plus HD" is a waterproof material that combines high performance with easy and quick workability. It has received positive feedback from users. The work is completed simply by inserting a sturdy and flexible hexagonal block and filling the surface with silicone compound. The hexagonal block forms a honeycomb structure that can withstand a tensile load of 100 kg. An optional leak-proof construction kit is available, allowing installation even in environments with flowing water. 【Features】 - Moisture-curing one-component compound exhibits excellent waterproofing and airtight performance. - The compound is silicone-based and has fire resistance. - Suitable for single-core, CVT, and multi-core cables. - Sturdy and flexible hexagonal blocks overlap to create a honeycomb structure. - Easy positioning and securing of cables. - Each component is flexible, allowing it to follow vibrations and cable contractions. - Compatible with various piping systems such as steel pipes and plastic pipes. - Also suitable for straight pipes and bell-mouth shapes. - Maintains long-term stable waterproof and airtight performance. *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproof Connector

"Philiform MD5" is an advanced foam resin waterproofing material. It uses a cartridge-type polyurethane resin, allowing mixing and injection to be completed in one process. Through foam expansion, it exhibits waterproofing, airtightness, chemical resistance, and oil resistance. It has a high-performance waterproof airtightness of 1.5 atmospheres (1.5 bar). 【Features】 ■ Special stopper and polyurethane resin set ■ Resin is cartridge-type, allowing simultaneous mixing and injection within the nozzle ■ Resin expands after injection, demonstrating high waterproof performance ■ Suitable for single-core, multi-core, and CVT stranded cables ■ Can be applied to horizontal, vertical, and inclined surfaces ■ Usable on FEP (corrugated resin pipe) with non-smooth inner surfaces ● Polyurethane resin forms high-density independent bubbles after curing ● Excellent mechanical strength, resistant to ground movement, vibration, and impact ● No special tools required, enabling easy and quick work ● Harmless to the human body, and no rust formation due to the absence of metals ● Suitable for pipe inner diameters of φ80~160mm *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector

The new product, Shake Gel, is a two-component silicone gel that cures at room temperature. Mixing is completed in one bottle, and it can be injected directly into the target object. Mixing time is reduced by 50% compared to conventional products, and curing time is also shortened. After curing, it can be disassembled by hand. It is translucent, allowing for visual inspection of the interior. It is versatile for emergency work and tasks at heights. It achieves high electrical insulation and waterproof performance with simple operations. Once the gel is filled, it blocks moisture, preventing internal condensation. By mixing and injecting it into electrical equipment connection points, the performance of the connections can be easily enhanced. It can be filled in junction boxes and pull boxes, preventing water ingress and corrosion due to internal condensation for critical equipment. In various industries, it provides easy electrical insulation, waterproofing, moisture prevention, condensation prevention, and disassembly capabilities simply by injecting and curing. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other cable related products

Power Gel is a two-component silicone gel that cures at room temperature. Before curing, it is a liquid similar to insulating oil, which can fill gaps, and after curing, it becomes a flexible silicone that can be disassembled by hand. It is translucent, allowing for easy visual inspection of the interior. It achieves high electrical insulation and waterproof performance with simple work. Once the gel is filled, it blocks moisture, preventing internal condensation. It can be widely utilized in various industries and fields. By injecting the mixture into connection points of electrical equipment, the performance of the connections can be easily enhanced. It can be filled into junction boxes or pull boxes to prevent water ingress and corrosion due to internal condensation in critical equipment. Since the main agent and curing agent are mixed and injected in the necessary amounts, it can be used up completely, making it economical. The containers and spatulas needed for mixing and injection are included in the kit, allowing work to start immediately after opening the box. The mixing time is only 30 seconds, after which it can be injected into the target object. Being silicone-based, it has high heat resistance and long-term reliability. By using Power Gel, electrical connection points are protected from water, dust, foreign matter, and moisture ingress for an extended period, regardless of whether they are new or existing installations.

• Other cable related products

Jumbo Gel is a two-component silicone gel that cures at room temperature. Before curing, it is a liquid similar to insulating oil, capable of filling gaps, and after curing, it becomes a flexible silicone that can be disassembled by hand. It is translucent, allowing for easy visual inspection of the interior. It is suitable for users who require large volumes. It achieves high electrical insulation and waterproof performance with simple application. Once the gel is filled, it blocks moisture, preventing internal condensation. It can be widely utilized in various industries and fields. By mixing and injecting it into connection points of electrical equipment, it can easily enhance the performance of these connections. It can be filled into junction boxes and pull boxes to prevent water ingress and corrosion due to internal condensation in critical equipment. Since the main agent and curing agent are mixed and injected in the necessary amounts, it can be used up completely, making it economical. The mixing time is only 30 seconds, after which it can be injected into the target object. Being silicone-based, it has high heat resistance and long-term reliability. By using Jumbo Gel, electrical connection points can be protected from water, dust, foreign matter, and moisture ingress for extended periods, regardless of whether they are new or existing installations.

• Other cable related products

Clear gel is a two-component silicone gel that cures at room temperature. It is mixed in a pack, eliminating the need for preparation of mixing containers. After curing, it can be disassembled by hand. It maintains high transparency over the long term. Available in four sizes: 150ml, 250ml, 350ml, and 500ml, allowing for appropriate selection based on usage. It achieves high electrical insulation and waterproof performance with simple work. Once the gel is filled, it blocks moisture, preventing internal condensation. By injecting it into connection points of electrical equipment, the performance of these connections can be easily enhanced. It can be filled in junction boxes or pull boxes to prevent water ingress and corrosion due to internal condensation for critical equipment. Mix the contents in the pack by kneading for 30 seconds, then cut the end and inject. There is no need to prepare a container for stirring, which shortens the working time. Being silicone-based, it allows for immediate electrical conduction. Additionally, it has high heat resistance and long-term reliability. Using clear gel protects electrical connections from water, dust, foreign matter, and moisture ingress for an extended period, regardless of whether they are new or existing. *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Latest Model Bond-Type Outer Conductor Stripping Tool Intercable FBS-2" can slice and remove the bond-type outer conductor in both circumferential and helical directions. The bond-type outer conductor is used in power cables up to 42kV according to IEC standards and in domestic transmission cables of 66kV and above. This product is applicable to outer diameters of 16 to 58mm and outer conductor thicknesses of up to 1.5mm, regardless of the cable's voltage or size. It allows for safe operation without the use of knives or cutters. 【Features】 ■ Applicable to outer diameters of 16 to 58mm and maximum thickness of 15mm ■ Sturdy, compact, and safe design ■ Circumferential and helical cutting can be switched with a lever ■ Blade adjustment can be made in 0.1mm increments using a dial ■ Equipped with bearings, eliminating the need for lubricants ■ Tapered cutting of the outer conductor ■ Taper angles for the outer conductor can be selected from two models (8° and 17°) ■ Easy to operate and quickly learned ■ Replaceable blade type ■ Stored in a nylon bag for convenient protection and transport * Watching the video will help you understand the product better. * For more details, please refer to the PDF document or feel free to contact us. * We have free loan tools available for work verification; please inquire.

• Pipe and cable cutters

The "Furisto-style outer conductor stripping tool Intercable HLS" can be used for various voltage cables ranging from 6kV to 33kV with just one unit. In addition to circumferential and spiral cutting, it can also cut the outer conductor vertically. This product is applicable for outer diameters of 16 to 41mm and a maximum outer conductor thickness of 2mm. It allows for safe operation without the use of knives or cutters. 【Features】 ■ Applicable for outer diameters of 16 to 41mm and a maximum outer conductor thickness of 2mm ■ Blade can be adjusted in 0.1mm increments using a dial ■ Equipped with a stopper for vertical cutting ■ Lightweight and compact, with a working rotation diameter of 130mm ■ Sturdy, compact, and safe design ■ Circumferential spiral and vertical cutting can be switched with a lever ■ Easy to operate and quickly learn ■ Replaceable blade type 【Application Reference】* Outer conductor outer diameter 16 to 41mm 6kV CV cable: 38 to 600 square mm 22kV CV cable: 60 to 400 square mm 33kV CV cable: 60 to 325 square mm * Watching the video will help you understand the product better. * For more details, please refer to the PDF document or feel free to contact us. * We have free loan tools available for work verification; please inquire.

• Pipe and cable cutters

Supra Gel is a room-temperature curing two-component mixed silicone gel. It comes in a cartridge format, allowing for simultaneous mixing and injection. It can be disassembled by hand and is translucent, enabling visual inspection of the interior. It is suitable for narrow spaces and small volume injections. It achieves high electrical insulation and waterproof performance with simple operations. Once the gel is filled, it blocks moisture, preventing internal condensation. By mixing and injecting it into electrical equipment connection points, you can easily enhance the performance of the connections. It can be filled in junction boxes and pull boxes, preventing water ingress and corrosion due to internal condensation for critical equipment. During work, simply attach it to a cartridge gun for injection, allowing for mixing and reducing work time. Being silicone-based, it offers high heat resistance and long-term reliability. By using Supra Gel, electrical connection points can be protected from water, dust, foreign matter intrusion, and moisture ingress for an extended period, regardless of whether they are new or existing. *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Bond Type Outer Conductor Stripping Tool Intercable FBS" can slice and remove the bond type outer conductor in both circumferential and helical directions. The bond type outer conductor is used for power cables up to 42kV according to IEC standards and for domestic transmission cables of 66kV and above. This product is applicable to cables with an outer diameter of 16 to 52mm and an outer conductor thickness of up to 1.5mm, regardless of the cable's voltage or size. It allows for safe operation without the use of knives or cutters. 【Features】 ■ Applicable to outer diameters of 16 to 52mm and maximum thickness of 1.5mm ■ Sturdy, compact, and safe design ■ Circumferential and helical cutting can be switched with a lever ■ Blade adjustment can be made in 0.1mm increments using a dial ■ Equipped with bearings, eliminating the need for lubricants ■ Cuts the outer conductor to a tapered shape (angle of 17°) ■ Easy to operate and quickly learned ■ Replaceable blade type ■ Stored in a plastic case for protection and convenient transport * Watching the video will help you understand the product better. * For more details, please refer to the PDF document or feel free to contact us. * We have free rental tools available for work verification; please inquire.

• Pipe and cable cutters

The "Underground Power Cable Sheath Stripping Tool AMSI Series" is an electric rotary multi-tool that combines the functions of stripping the insulation and outer conductor of power cables rated at 66kV and above in one device. It can reduce work time while maintaining high quality. 【Features】 ■ Capable of stripping the outer conductor and insulation of underground power cables rated at 66kV and above ■ Connects to a standard cordless driver for electric rotary operation ■ Six bearings securely hold the cable, ensuring precise finishing ■ Does not require lubricants or grease for operation ■ The outer conductor stripping has a tapered shape for a finished end ■ Circumferential and longitudinal cutting can be switched without removing the tool ■ Suitable for cables with outer diameters ranging from 15 to 165mm across four models ■ Blades are replaceable ■ Can be used in manufacturing inspections, quality control, and various work sites *For more details, please refer to the PDF document or feel free to contact us. *This product has rental tools available domestically (as of September 2024, only AMSI50-95). Please contact us if you are interested.

• Pipe and cable cutters

Soft gel is a one-component silicone gel. A highly adhesive gel is stored in a cartridge. The gel extruded from the cartridge has a high viscosity and does not drip, possessing strong adhesion to various materials, and it has the characteristic of not losing its adhesive strength. It can be used for purposes such as temporary protection, repair of exposed areas, and preventing insects or small animals from entering through gaps in pipes. *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Underground Power Transmission Cable Sheath Stripping Tool CAFM Series" is a manual rotating multi-tool that combines the functions of stripping the insulation and outer conductor of power transmission cables rated at 66kV and above. Additionally, with optional accessories (sold separately), it can perform insulation chamfering, groove processing of the insulation, and can be converted to a powered rotary tool. It supports work efficiency and high construction quality. 【Features】 ■ Capable of stripping the outer conductor and insulation of power transmission cables ■ 16 bearings securely hold the cable, achieving precise finishing ■ The included stopper allows the tool to be stopped at the appropriate position ■ Does not require lubricants or grease ■ The outer conductor stripping has a tapered shape ■ Applicable to outer diameters of 40 to 160mm with two models ■ Usable in manufacturing inspections, quality control, and various work sites ■ Further multifunctionality available with optional accessories (see product catalog) * For more details, please refer to the PDF document or feel free to contact us. * This product is available for loan as a tool in Japan (as of September 2024, only CAFM40-90). Please contact us if you are interested. * For excellent functionality and surface finishing, please watch the video.

• Pipe and cable cutters

The "Underground Power Cable Sheath Stripping Tool DM Series" is a tool designed to cut and strip the sheath and underlying metal shield layer of power cables rated at 66kV and above. The skills of power jointing are inherited by the Alrock tool. 【Features】 - Capable of cutting the hard and slippery sheath material of underground power cables rated at 66kV and above. - Can also cut the underlying metal layer (aluminum or lead shield). - The structure firmly clamps the cable, allowing for stable operation. - Work is not affected even if the sheath surface is hard and slippery. - Precise cutting is possible with sharp blades and depth adjustment functionality. - The tool advances vertically through handle rotation, significantly reducing labor effort. - Capable of circumferential and longitudinal cutting. - Suitable for cable outer diameters from 50mm to a maximum of 145mm, with thicknesses of 7mm and 11mm (varies by model). - The detection function notifies contact between the blade and shield with sound (DMS models only). - Blades are replaceable. - Usable in inspection, quality control, manufacturing departments, and various work sites. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "Underground Power Transmission Cable Sheath Stripping Tool DMSR Series" is a tool for cutting and stripping the sheath and underlying metal shield layer of power transmission cables rated at 66kV and above. The skills of power transmission jointers are inherited by ALROC's tools. 【Features】 ■ Can cut the hard and slippery sheath material of underground power transmission cables rated at 66kV and above. ■ Can also cut the underlying metal layer (aluminum or lead shield). ■ The structure firmly clamps the cable, allowing for stable operation. ■ The dial gauge allows for numerical management of blade depth, making blade setting easy. ■ Sharp blades and depth adjustment features enable precise cutting. ■ The tool moves vertically due to handle rotation, significantly reducing labor effort. ■ Circumferential and vertical cutting can be switched without the need to remove the tool. ■ Suitable for cable outer diameters of 40 to 160mm and thicknesses of 11mm with two models. ■ The detection function notifies contact between the blade and shield with sound, allowing for precise stripping. ■ Blades are replaceable. ■ Can be used in manufacturing inspections, quality control, and various work sites. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "Underground Power Cable Outer Insulation Scraper GRI" is a tool designed to easily remove the outer insulation remnants of underground power cables. It allows for safer and more efficient work compared to the traditional method of using glass shards. Additionally, it can also thinly shave insulation and is useful for surface finishing tasks. 【Features】 ■ Equipped with handles on both sides for a firm grip during work ■ The handles are made with non-slip resin ■ By pulling from the back to the front, outer insulation remnants can be removed ■ The sharp blade tip is not exposed, reducing the risk of injury ■ The blade is replaceable (replacement blades sold separately) ■ Suitable for outer diameters ranging from 15 to a maximum of 240 mm ■ Can be used in inspection, quality control, manufacturing departments, and various work sites *For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "Underground Power Cable Stripping Assist Tool" is an auxiliary tool designed to streamline and simplify the stripping process that occurs after making cuts into the sheath and underlying metal layer of underground power cables. It features a unique shape that allows it to be driven into the lower part of the sheath like a wedge or gripped and lifted using the principle of leverage, thereby reducing the labor required for this task. 【Product Features】 ■ Product Name: EGA (Applicable Maximum Outer Diameter 240mm) * By hooking the tip of the tool onto the cut made vertically and spreading it on both sides, it efficiently strips the cable and the underlying metal layer. This product is used in pairs. ■ Product Name: EVP (Applicable Diameter 15-240mm) * This tool is used by inserting the thin tip from the front or vertically to lift using the principle of leverage. ■ Product Name: EV-HTB (Applicable Maximum Diameter 240mm) * This product is used by driving the wedge-shaped tool into the end of the cable to lift it. * It can be used in inspection, quality control, manufacturing departments, and various work sites. * For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "Multi Tool MF2 Series" is a tool that combines two functions necessary for the pre-processing steps required for underground power distribution and renewable energy cable connections into one device. It can strip cable sheaths and insulators with a single tool. This reduces indirect labor such as tool management, and in the work environment, it is expected to improve work efficiency and reduce work time by utilizing the two functions. Users who have purchased it have given high evaluations and satisfaction. It can be used for a wide range of voltages and sizes from 6kV to 33kV. 【Features】 ■ Can strip sheaths and insulators with one device ■ Can switch between circumferential and spiral cutting without removing the tool ■ Handle and other parts are detachable for compact portability ■ Thickness adjustment is possible with a dial for very fine tuning ■ Usable for a wide range of voltages and sizes within the compatibility range ■ Insulator stripping can be done without marking using an adjustable stopper ■ Blade replacement method *For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "Multi Tool MF3 Series" is a multifunctional tool that integrates the necessary preprocessing steps for cable connections in underground power distribution and renewable energy into a single device. ★Cable sheath★Insulator★Furisto-style outer conductor can all be stripped with one tool. By purchasing the SCH insert as an option, it also allows for the chamfering of the ★insulator★. Users who have purchased this product have given it high ratings and satisfaction. It can be used for a wide range of voltages and sizes up to 33kV. 【Features】 ■ Can strip three types (sheath, insulator, Furisto outer conductor) with one tool ■ Circumferential and spiral cutting can be switched without removing the tool ■ Outer conductor stripping is exclusively Furisto-style with an insert attachment method ■ Detachable handle reduces labor for rotation work ■ Thickness adjustment can be made very finely with a dial ■ Usable for a wide range of voltages and sizes within the compatibility range ■ Insulator stripping comes with a stopper for length adjustment, eliminating the need for marking ■ Blade replacement method *For more details, please refer to the PDF document or feel free to contact us. *We offer a free rental machine for trial use; please inquire.

• Pipe and cable cutters

The latest standard for ferrule terminals, DIN 46228-4, is DIN 46228-4: 2020-03. This is due to the confirmation of tensile strength that does not meet the specified values caused by excessive hardness of the copper tube material. The new standard defines them correctly. Intercable's ferrule terminals are compliant with the new standard DIN 46228-4: 2020-03. We recommend checking the details of the DIN 46228-4 standard and making a purchase. 【Features】 ■ High-quality bare ferrule terminals manufactured in Germany ■ Ferrule terminals without insulating resin parts ■ Meets the performance requirements of the latest DIN 46228-4: 2020-03 ■ Copper tube part: Tough pitch copper (99.9% purity) with tin plating ■ Maximum heat resistance temperature of 105℃ ■ ROHS compliant, UL compliant (depending on the part number) ■ Halogen-free *For more details, please refer to the PDF materials or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The latest standard for ferrule terminals, DIN 46228-4, is DIN 46228-4: 2020-03. This is due to the confirmation of tensile strength not meeting specified values caused by excessive hardness of the copper tube material. The new standard defines them correctly. Intercable's ferrule terminals are compliant with the new standard DIN 46228-4: 2020-03. We recommend checking the details of the DIN 46228-4 standard and making a purchase. 【Features】 ■ High-quality twin ferrule terminals manufactured in Germany ■ Twin terminals can connect two wires simultaneously ■ Meets the performance requirements of the latest DIN 46228-4: 2020-03 ■ Copper tube part: Tough pitch copper (99.9% purity) with tin plating ■ Resin part: Polypropylene ■ Maximum heat resistance temperature of 105℃ ■ ROHS compliant, UL compliant (depending on the part number) ■ Halogen-free ■ Can be compactly crimped with an eye crimping tool *For more details, please refer to the PDF materials or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The latest standard for ferrule terminals, DIN 46228-4, is DIN 46228-4: 2020-03. This is due to the confirmation of tensile strength not meeting specified values caused by excessive hardness of copper tube material. The new standard defines them correctly. Intercable's ferrule terminals are compliant with the new standard DIN 46228-4: 2020-03. We recommend checking the details of the DIN 46228-4 standard and making a purchase. 【Features】 ■ High-quality wide ferrule terminals manufactured in Germany ■ Wide inner diameter of the copper tube and large outer diameter of the insulating resin part ■ Meets the performance requirements of the latest DIN 46228-4: 2020-03 ■ Copper tube part: Tough pitch copper (99.9% purity) with tin plating ■ Resin part: Polypropylene ■ Maximum heat resistance temperature of 105℃ ■ ROHS compliant, UL compliant (depending on the part number) ■ Halogen-free *For more details, please refer to the PDF materials or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The latest standard for ferrule terminals, DIN 46228-4, is DIN 46228-4: 2020-03. This is due to the confirmation of tensile strength not meeting the specified values caused by excessive hardness of the copper tube material. The new standard defines them correctly. Intercable's ferrule terminals are compliant with the new standard DIN 46228-4: 2020-03. We recommend checking the details of the DIN 46228-4 standard and making a purchase. 【Features】 ■ High-quality ferrule terminals manufactured in Germany ■ Meets the performance requirements of the latest DIN 46228-4: 2020-03 ■ Copper tube part: Tough pitch copper (99.9% purity) with tin plating ■ Resin part: Polypropylene ■ Available in a wide variety of sizes and insulation colors ■ Maximum heat resistance temperature of 105℃ ■ ROHS compliant, UL compliant (depending on the part number) ■ Halogen-free ■ Can be compactly crimped with an eye crimping tool *For more details, please refer to the PDF materials or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE16T" can be used for 0.14 to 16 square millimeters with just one unit. 【Features】 ■ Applicable for ferrule terminals from 0.14 to 16 square millimeters ■ Ratchet mechanism allows you to rest your hand even while crimping ■ Uses 7 different dies depending on terminal size ■ Crimping area has a trapezoidal shape ■ Stored in a cardboard box to reduce plastic usage ■ Lightweight and compact with an easy-to-grip handle ■ High-quality product made in Germany *For more details, please refer to the PDF document or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE16TF" features an auto-adjust mechanism that allows crimping at a single point without changing the die section. This prevents issues caused by incorrect die selection. It is designed to insert ferrule terminals from the front of the tool, making it suitable for special environments such as tight spaces. Additionally, it is an excellent product that can also be used for twin ferrule terminals. 【Features】 ■ Manufactured by Intercable (Made in Germany) ■ Suitable for ferrule terminals from 6 square to 16 square ■ Applicable for twin ferrule terminals up to 2×4-6 square ■ Crimping occurs at one point in a trapezoidal shape ■ No mistakes in die section selection ■ Special shape for crimping terminals from the front tip ■ Automatic adjustment function ensures proper tightening for completion ■ Lightweight, compact, and easy-to-grip handle * For more details, please refer to the PDF document or feel free to contact us. * We offer free loan tools for work verification; please inquire. ★ Intercable has a wide variety of ferrule terminal crimping tools available. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE6TF" features an auto-adjust mechanism that allows crimping at a single point without changing the die section. This prevents issues caused by incorrect die selection. It is designed to insert ferrule terminals from the front of the tool, making it suitable for special environments such as tight spaces. It is also an excellent product that can be used with twin ferrule terminals. 【Features】 ■ Manufactured by Intercable (Germany) ■ Suitable for ferrule terminals from 0.14 to 6 square mm ■ Applicable for twin ferrule terminals up to 2×0.5~2.5 square mm ■ Crimping is done at one point in a trapezoidal shape ■ No mistakes in die section selection ■ Special shape for crimping terminals from the front tip ■ Automatic adjustment function ensures proper tightening for completion ■ Lightweight, compact, and easy-to-grip handle * For more details, please refer to the PDF document or feel free to contact us. * We have free loan tools available for work verification; please inquire. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Detailed information can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE95R" is a reliable crimping method developed by Intercable, a company that manufactures ferrule terminals. It allows for the most compact crimping of ferrule terminals ranging from 50 to 95 square millimeters, eliminating protrusions, enhancing insertability into terminal blocks, and achieving a highly reliable connection. 【Features】 ■ Compact crimping shape with no protrusions using eye crimping ■ Applicable to ferrule terminals from 50 to 95 square millimeters ■ Ratchet mechanism allows for resting hands during crimping ■ Uses three different dies depending on terminal size ■ Stored in a cardboard box to reduce plastic usage ■ Lightweight, compact, and easy-to-grip handle ■ High-quality product made in Germany *For more details, please refer to the PDF document or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE50R" is a reliable crimping method developed by Intercable, a company that manufactures ferrule terminals. It allows for the most compact crimping of ferrule terminals from 10 to 50 square millimeters, eliminating protrusions, enhancing insertion into terminal blocks, and achieving a highly reliable connection. 【Features】 - Compact crimping shape without protrusions using eye crimping - Applicable for ferrule terminals from 10 to 50 square millimeters - Ratchet mechanism allows for resting hands during crimping - Uses five different dies depending on terminal size - Stored in a cardboard box to reduce plastic usage - Lightweight, compact, and easy-to-grip handle - High-quality product made in Germany *For more details, please refer to the PDF document or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE16S" features an auto-adjust mechanism that allows crimping at a single point without changing the die section. This prevents issues caused by incorrect die selection. It is also an excellent product that can be used for twin ferrule terminals. 【Features】 ■ Manufactured by Intercable (Germany) ■ Suitable for ferrule terminals from 0.08 square to 16 square ■ Applicable to twin ferrule terminals with a maximum of 2×0.25 to 6 square ■ Crimping is done at one point in a hexagonal shape ■ Comes with a movable guide for inserting the cable conductor in the center ■ No mistakes in die section selection ■ Automatic adjustment function ensures proper tightening for completion of work ■ Lightweight, compact, and easy-to-hold grip handle * For more details, please refer to the PDF document or feel free to contact us. * We offer free loan tools for work verification; please inquire. ★ Intercable has a wide variety of ferrule terminal crimping tools available. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE10V" features an auto-adjust mechanism that allows crimping at a single point without changing the die section. This prevents issues caused by incorrect die selection. It is also an excellent product that can be used for twin ferrule terminals. 【Features】 - Manufactured by Intercable (Made in Germany) - Suitable for ferrule terminals from 0.08 to 10 square mm - Applicable for twin ferrule terminals up to 2×0.25 to 4 square mm - Crimping is done at one point in a square shape - No mistakes in die section selection - Automatic adjustment function ensures proper tightening for completion - Lightweight, compact, and easy-to-grip handle *For more details, please refer to the PDF document or feel free to contact us. *We have free loan tools available for work verification; please inquire. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE25R" is a highly reliable crimping method developed by Intercable, a manufacturer of ferrule terminals. It allows for the most compact crimping of ferrule terminals ranging from 10 to 25 square millimeters, eliminating protrusions, enhancing insertion into terminal blocks, and achieving a highly reliable connection. 【Features】 ■ Eye crimping (please refer to the image for the shape) ■ Suitable for ferrule terminals from 10 to 25 square millimeters ■ Ratchet mechanism allows for resting hands even during crimping ■ Uses three different dies depending on terminal size ■ Stored in a cardboard box to reduce plastic usage ■ Lightweight, compact, and easy-to-grip handle ■ High-quality product made in Germany *For more details, please refer to the PDF document or feel free to contact us. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE16R" is a reliable crimping method developed by Intercable, a manufacturer of ferrule terminals. It allows for the most compact crimping of ferrule terminals from 10 to 16 square millimeters, eliminating protrusions, enhancing insertion into terminal blocks, and achieving a highly reliable connection. 【Features】 ■ Eye crimping (please refer to the image for the shape) ■ Applicable for ferrule terminals from 10 square to 16 square ■ Ratchet mechanism allows for resting hands during crimping ■ Uses two different dies depending on terminal size ■ Stored in a cardboard box to reduce plastic use ■ Lightweight, compact, and easy-to-grip handle ■ High-quality product made in Germany *For more details, please refer to the PDF document or feel free to contact us. *We have free loan tools available for work verification; please inquire. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE6R" is a reliable crimping method developed by Intercable, a manufacturer of ferrule terminals. It allows for the most compact crimping of ferrule terminals ranging from 1.5 to 6 square millimeters, eliminating protrusions, enhancing insertion into terminal blocks, and achieving a highly reliable connection. 【Features】 ■ Eye crimping (please refer to the image for the shape) ■ Applicable for ferrule terminals from 1.5 to 6 square millimeters ■ Ratchet mechanism allows you to rest your hand even while crimping ■ Uses three different dies depending on the terminal size ■ Stored in a cardboard box, reducing plastic usage ■ Lightweight, compact, and easy-to-grip handle ■ High-quality German manufacturing * For more details, please refer to the PDF document or feel free to contact us. * We have free loan tools available for work verification; please inquire. ★ Intercable offers a wide variety of ferrule terminal crimping tools. More details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Eye Crimping Tool MPAE2R" is a reliable crimping method developed by Intercable, a manufacturer of ferrule terminals. It allows for the most compact crimping of ferrule terminals ranging from 0.14 to 2.5 square millimeters, eliminating protrusions, enhancing insertability into terminal blocks, and achieving a highly reliable connection. 【Features】 ■ Eye crimping (please see the image for the shape) ■ Applicable for ferrule terminals from 0.14 to 2.5 square millimeters ■ Ratchet mechanism allows for resting your hands during crimping ■ Uses four different dies depending on terminal size ■ Stored in a cardboard box to reduce plastic usage ■ Lightweight, compact, and easy-to-grip handle *For more details, please refer to the PDF materials or feel free to contact us. *We have free loan tools available for work verification; please inquire. ★ Intercable offers a wide variety of ferrule terminal crimping tools. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Ferrule Terminal Crimping Tool MPAE16VV" is a product that integrates the latest technology. The head rotates 360 degrees, allowing crimping work in tight spaces without changing posture. It features an auto-adjust mechanism that enables crimping at one location without changing the crimping die. It automatically releases when the appropriate pressure is reached. 【Features】 ■ Manufactured by Intercable (Made in Germany) ■ Suitable for ferrule terminals from 0.08 sq to 16 sq ■ Applicable for twin ferrule terminals up to 2×10 sq ■ Crimps sleeves up to 18mm in one go ■ Crimps at one location in a square shape ■ No mistakes in crimping die placement ■ Auto-adjust function ensures proper tightening is completed ■ Lightweight, compact, and easy-to-grip handle *For more details, please refer to the PDF document or feel free to contact us. *We offer free loan tools for work verification; please inquire. ★ Intercable has a wide variety of ferrule terminal crimping tools available. Details can be downloaded from the comprehensive catalog.

• Pipe and cable cutters

The "Cable Insulation Stripping Tool IMS" is an insulation stripping tool specifically designed for 6kV cables. By simply rotating from the tip, it can strip insulation from 20mm to 100mm in 1mm increments. It features an interchangeable attachment system suitable for sizes from 38SQ to 250SQ. By changing the attachment, it can be used for multiple sizes. 【Features】 ■ Achieves 6kV insulation stripping with just rotation ■ Compatible with 38, 60, 100, 150, 200, and 250SQ ■ Composed of a handle and attachment ■ Attachments can be easily attached and detached, and come with a locking function ■ Insulation stripping length can be adjusted in 1mm increments using a dial (20-100mm) ■ Once the tool is rotated to the set length, the work is automatically completed ■ Easy to operate and can be quickly learned ■ Replaceable blade type ■ The handle and attachment can be purchased separately * For more details, please refer to the PDF document or feel free to contact us. * We have free rental tools available for work verification; please inquire.

• Pipe and cable cutters

The "Cable Insulation Stripping Tool IMS-2" can cut the insulation of power cables from low voltage to extra high voltage cable classes in both circumferential and spiral directions. It is applicable to cables with an outer diameter of 15 to 52 mm and a maximum insulation thickness of 15 mm, regardless of the cable's voltage or size. Safe operation can be performed without using knives or cutters. The tool is easy to use and can be quickly mastered, with no complicated operations involved. It can also be used for IEC standard cables. 【Features】 ■ Insulation stripping up to 33kV ■ Applicable to outer diameters of 15 to 52 mm and a maximum thickness of 15 mm ■ Sturdy, compact, and safe design ■ Capable of circumferential and spiral cutting ■ Blade angle adjustable in 5 stages ■ Blade adjustment can be made in 0.1 mm increments using a dial ■ Operation is simple and can be quickly learned ■ Replaceable blade type ■ Stored in a plastic case for protection and convenient transport ■ Lubricant (grease) included ■ Specially shaped blade that minimizes damage to underlying layers * Watching the video will help you understand the product better. * For more details, please refer to the PDF document or feel free to contact us. * We have free rental tools available for work verification; please inquire.

• Pipe and cable cutters

The "Cable Stripper ABI-1" is a revolutionary product that can strip the sheath and insulation of low-voltage cables up to 250㎟ with just one device. It allows for easy switching between circumferential, spiral, and longitudinal cutting without removing the cable, simply by rotating the dial. Safe operation is possible without using knives or cutters. 【Features】 ■ Strips the sheath and insulation of cables ■ Suitable for PVC and rubber sheaths ■ Applicable for outer diameters from 4.5 to 29mm, with a maximum thickness of 3mm ■ Capable of circumferential, spiral, and longitudinal cutting ■ Cutting mode switching is done solely through dial settings ■ Blade adjustment can be made in 0.1mm increments using the dial ■ Easy to operate and quickly learned ■ Allows switching between circumferential and longitudinal cutting without removing tools ■ Capable of intermediate stripping ■ Double-sided blades that are replaceable ■ Blade shape that does not damage the underlying layer * Watching the video will help you understand the product better. * For more details, please refer to the PDF document or feel free to contact us. * We have free rental tools for work verification; please inquire.

• Pipe and cable cutters