日本雲林 List of Products and Services

This is a heat shrink tube made from flexible polyolefin high-temperature material. It is a tube specifically designed for automotive wire harness protection that can be used in liquid states of diesel and lubricants. It is ideal for insulation protection of products used in harsh environments.

• Engine parts

It has excellent wear resistance and mechanical properties. The thermoplastic resin applied to the inner surface has good adhesion to PVC and XLPE cables.

• Other electronic parts

It is possible to use high voltage up to 36kV. It has good scratch resistance and bending resistance. It is used for insulation protection of copper busbars in substations and distribution boards.

• Board materials

This is a self-flap sleeve made of polyester fibers. The sleeve, made from a flexible material, excels in noise absorption and seismic resistance. It is also easy to remove, making it a viable alternative to corrugated tubes.

• Other Auto Parts

It can be used for insulation protection of low voltage copper busbars up to 1-3.6kV. There are 6 standard colors available, making identification easy.

• Transformers

This is a very convenient tube that has good workability in finishing operations and also has the ability to expand its inner diameter. It is made of weather-resistant PET fiber. It is a PET fiber sleeve that naturally gathers in a "no" shape. It is easy to remove, making it possible to use as a substitute for corrugated tubes.

• Other machine tools

It is resistant to most acids and solvents except for strong alkaline solvents and high-temperature fluorinated gases. Since it does not contain plasticizers or additives, it does not contaminate the liquids or gases it comes into contact with.

• Other terminal blocks

The inner layer uses thermoplastic polyamide resin, which provides excellent waterproofing, making it ideal for protecting against chemicals and plumbing pipes in wet areas. The outer layer is made of polyolefin resin, which has excellent mechanical strength.

• Piping Materials

It can be used for insulation protection of copper busbars in medium voltage up to 15-24kV. It has excellent physical, chemical, and electrical properties. It is available in a wide range of sizes, accommodating from Φ20 to Φ210.

• Control Panel

The tube is a two-layer waterproof type. It is bonded with polyamide adhesive to a semi-rigid heat-shrink outer layer, and after shrinking, it can provide waterproofing as well as reinforcement against vibrations. The use of a dedicated crimping tool is recommended (Model: CT2005).

• Automotive Connectors

It is suitable for harness protection of vehicles and vessels used in harsh environments, such as special vehicles, because it is resistant to diesel and mineral oils.

• Fuel system parts

This is a heat shrink tube made of bridge-crosslinked fluorinated elastomer. It has good wear resistance, high-temperature resistance, and flame retardancy. It has excellent chemical properties and is stable against acids, solvents, and fuels.

• Other electronic parts

It is ideal for protecting ship harnesses due to its excellent waterproof and saltwater resistance.

• Other electronic parts

It is resistant to most solvents, acids, and alkalis, and is used in harsh environments.

• Resistors

It is resistant to most acids and oils. It is suitable for the protection of batteries, capacitors, and fluorescent lights.

• Lithium-ion battery

By having non-adhesive surfaces on both sides of the inner surface, the positioning of the box can be easily achieved, and the cable can be securely held.

• Other terminal blocks

By having non-adhesive surfaces on both sides of the inner surface, the positioning of the box can be easily achieved, and the cables can be securely held.

• Other terminal blocks

It is resistant to chemicals and solvents, and has excellent abrasion resistance and corrosion resistance. Compared to polyolefin shrink tubes of the same size, it is a thin-walled type, making it ideal for marking and protecting cables and wires due to its flexibility and transparency.

• Other Auto Parts

The outer layer is a combination of modified polyolefin and an inner layer of thermoplastic adhesive, providing good adhesion to PVC, PE, and metal coatings, as well as waterproofing. It can also be reinforced against vibrations.

• Crimp Terminal

This is a very convenient tube that has good workability in assembly operations and also has the ability to expand its inner diameter. It is made of weather-resistant PET fiber. It is UL certified as a flame retardant product. Simple bundling can be done with Velcro.

• Other electronic parts

It can be used for insulation protection of copper busbars in medium voltage up to 15-24kV. It has excellent physical, chemical, and electrical properties.

• Control Panel

It has the best insulation properties due to the combination of high-shrinkage polyolefin resin and thermoplastic polyamide resin, making it ideal for protecting cable connections and connector joints (ASM). Additionally, it excels in abrasion resistance and corrosion resistance, and can also be used to protect chemical piping lines and communication cables. GSM is a shrink tube without an adhesive layer.

• Other electronic parts

The inside of the cap is coated with adhesive, allowing it to be completely sealed and waterproof after shrinkage. The outer layer is made of semi-rigid polyolefin material, which offers excellent abrasion resistance and chemical corrosion resistance.

• Other terminal blocks

We use heat shrink tubing made of flame-retardant polyolefin material. It has excellent durability for labeling and does not require protective outer layers. The heat shrink tubing is pre-cut, making it easy to work with. It is ideal for wire labeling.

• Other terminal blocks

It is resistant to acids, solvents, and fuels. It is ideal for protecting coatings. It has excellent high-temperature resistance, abrasion resistance, and electrical insulation properties.

• Resin mold

It has the best insulation properties due to the combination of high-shrinkage polyolefin resin and thermoplastic polyamide resin, making it ideal for protecting cable connections and connector joints (ASM). Additionally, it excels in abrasion resistance and corrosion resistance, and can also be used for protecting chemical piping lines and communication cables. GSM is a shrink tube without an adhesive layer.

• Other electronic parts

It is suitable for sealing and waterproofing outdoor equipment, CATV, and vessels. It has good wear resistance, corrosion resistance, and UV resistance due to the blend of flexible polyolefin resin and thermoplastic adhesive.

• Other electronic parts

This is a high-temperature resistant PVDF material heat shrink tube. Due to its semi-rigid nature, it excels in abrasion resistance and corrosion resistance, making it capable of withstanding chemicals, solvents, and fuels. It is a fluoropolymer tube with excellent heat resistance, suitable for use in harsh environments.

• Engine parts

The combination of high shrinkage ratio (6:1) polyolefin resin and thermoplastic polyamide resin provides the best insulation performance, making it ideal for protecting the connection points of cables with large steps and the junctions of connectors.

• Piping Materials

This is bridge-crossing polyethylene heat shrink tubing. It has excellent durability for signage and does not require outer layer protection. The tubing can be cut (the minimum cutting length is 10 mm).

• Other process controls

This is a medical heat shrink tube that has lubricity, flexibility, and electrical insulation properties, and is widely used in electric scalpels, endoscopes, and other applications.

• Other physicochemical equipment

The inner surface is coated with a thermoplastic polyamide resin, which provides excellent waterproofing, making it suitable for waterproof protection of crimp terminals and screw joints, as well as preventing disconnection due to vibrations.

• Crimp Terminal

Shrink tube for earth wire identification. It is widely used for cable marking, electronic insulation, and more.

• Other electronic parts

Due to its thin meat thickness and the ability to shrink at low temperatures, it allows for a reduction in shrinkage time. It can be used to protect parts that cannot be subjected to heat due to shrinking at low temperatures.

• Other electronic parts

ACS100 is a highly transparent flexible adhesive heat shrink tube. It is suitable for automotive wire harnesses due to its optimal insulation and moisture protection features. With a high shrink ratio of 4:1 to 6:1 and the ability to fully shrink at 80°C, it offers good work efficiency and allows for quick shrinking in a short time.

• Other electronic parts

Due to its thin thickness and the ability to shrink at low temperatures, it allows for a reduction in shrinkage time. This heat shrink tube can be used to protect components that cannot be subjected to heat because they shrink at low temperatures.

• Other electronic parts

The inner surface of the shrink tube contains a solder ring, allowing for simultaneous connection of the wires. Additionally, there is adhesive on the inner surface of the tube, providing waterproofing.

• Other Connectors

The inner surface of the tube is coated with a thermoplastic adhesive, making it ideal for protecting cables, wiring, connectors, etc., that require waterproofing.

• Other electronic parts

It is used for the removal of heat shrink tubing, paint, adhesives, etc.

• Other machine tools

It is ideal for protecting ship harnesses due to its excellent waterproof and saltwater resistance.

• Other electronic parts

It is made of electron cross-linked EPR rubber and is used for preventing corrosion and oxidation of copper pipes, as well as for repairing and protecting damaged areas of various types of cables. It has UV resistance. It is convenient for places where heat treatment is not possible, as no heating is required.

• Adhesive tape

It is used for cable branching processing and connection processing. It is effective for relieving residual stress.

• Other electronic parts

Conventional LED fluorescent lamps used polycarbonate as a light diffusion material, but a new material has been developed by coating a glass tube with a PET thermal shrink tube. The cost and various physical properties are superior to those of conventional polycarbonate materials, and it also has shatterproof functionality, making it a viable alternative to polycarbonate.

• LED fluorescent lamp

It is used for adhesion, sealing, and waterproofing of heat shrink terminals and intermediate connections in underwater cables, tanks, etc. #Self-fusing #5G

• Adhesive tape

[Free sample giveaway]

• Other Auto Parts