日本雲林 List of Products and Services

It is suitable for sealing and waterproofing outdoor equipment, CATV, and vessels. It has good abrasion resistance, corrosion resistance, and UV resistance due to the blend of flexible polyolefin resin and thermoplastic adhesive.

• Other electronic parts

The use of heat-meltable polyamide resin on the inside provides excellent waterproofing, making it ideal for protecting against chemicals and plumbing pipes in wet areas. The outer layer is made of polyolefin resin, which has excellent mechanical strength.

• Piping Materials

The combination of high shrinkage ratio polyolefin resin and thermoplastic polyamide resin provides excellent insulation properties, making it ideal for protecting cable connections and connector joints (ASM). Additionally, it excels in abrasion resistance and corrosion resistance, making it suitable for protecting chemical piping lines and communication cables. GSM is a shrink tube without an adhesive layer.

• Other electronic parts

The combination of high shrinkage ratio (6:1) polyolefin resin and thermoplastic polyamide resin provides the best insulation performance, making it ideal for protecting the connection points of cables with significant height differences and connector joints.

• Piping Materials

It is suitable for harness protection of vehicles and vessels used in harsh environments, such as special vehicles, because it is resistant to light oil and mineral oil.

• Fuel system parts

It is resistant to chemicals and solvents, and excels in abrasion resistance and corrosion resistance. Compared to standard-sized polyolefin shrink tubes, it is a thin-walled type, making it ideal for marking and protecting cables and wires due to its flexibility and transparency.

• Other Auto Parts

Due to its semi-rigid nature, it excels in abrasion resistance and corrosion resistance, and can withstand chemicals, solvents, and fuels. It is a fluororesin tube with excellent heat resistance, suitable for use in harsh environments.

• Engine parts

It is resistant to most acids and solvents except for strong alkaline solvents and high-temperature fluoride gases. Since it does not contain plasticizers or additives, it does not contaminate the liquids or gases it comes into contact with.

• Other terminal blocks

It is resistant to most solvents, acids, and alkalis, and is used in harsh environments.

• Resistors

The inner surface of the shrink tube contains a solder ring, allowing for simultaneous connection of the wires. Additionally, there is adhesive on the inner surface of the tube, providing waterproofing.

• Other Connectors

It can be used for insulation protection of copper busbars at low voltages up to 1-3.6kV. There are six standard colors available, making identification easy.

• Transformers

It can be used for insulation protection of copper busbars in medium voltage up to 15-24kV. It has excellent physical, chemical, and electrical properties.

• Control Panel

It is possible to use high voltage up to 36kV. It has good scratch resistance and bending resistance. It is used for insulation protection of copper busbars in substations and distribution boards.

• Board materials

It is used in switching equipment and substations. Insulation protection for copper pipes of arbitrary shapes is possible. It is convenient for use in places without fire hazards. #Self-fusing #5G #Dielectric strength

• Board materials

It is used for cable branching processing and connection processing. It is effective for relieving residual stress.

• Other electronic parts

It is resistant to most acids and oils. It is suitable for the protection of batteries, capacitors, and fluorescent lights.

• Lithium-ion battery

It is composed of hot melt tubing, stainless steel reinforcement rods, and heat shrink tubing (cross-linked polyolefin). It can be used for reinforcing and protecting the fusion points of optical fibers.

• Touch Panel

By having non-adhesive surfaces on both sides of the inner surface, the positioning of the box can be easily achieved, and the cables can be securely held.

• Other terminal blocks

This is a sleeve knitted with PET monofilament fibers. It is used for harness bundling, cables, heavy equipment, and fishing rod protection. There are flame-retardant and inexpensive non-flame-retardant options available.

• Other electronic parts

This is a very convenient tube that has good workability in bundling operations and also has the ability to expand its inner diameter. It is made of weather-resistant PET fiber and is UL certified as flame retardant. It allows for easy bundling with Velcro.

• Other electronic parts

This is a very convenient tube that has good workability in finishing operations and also has the ability to expand its inner diameter. It is made of weather-resistant PET fiber. It is a PET fiber sleeve that naturally gathers into a "no" shape. It is easy to remove, making it possible to use as a substitute for corrugated tubes.

• Other machine tools

Conventional LED fluorescent lights used polycarbonate as a light diffusion material, but a new material has been developed by coating a glass tube with a PET heat-shrinkable tube. This new material excels in cost and various physical properties compared to traditional polycarbonate, and it also has shatterproof features, making it a viable alternative to polycarbonate.

• LED fluorescent lamp

It is made from electron cross-linked EPR rubber and is used for preventing corrosion and oxidation of copper pipes, as well as for repairing and protecting damaged parts of various types of cables. It has UV resistance. Since no heating is required, it is convenient for places where heat treatment cannot be performed. #Self-bonding #5G #Voltage resistance

• Adhesive tape

It is used for adhesion, sealing, and waterproofing of heat shrink terminals and intermediate connections in underwater cables, tanks, etc.

• Adhesive tape

It is a medical heat shrink tube that has lubricity, flexibility, and electrical insulation properties, and is widely used in electric scalpels, endoscopes, and other applications.

• Other physicochemical equipment

It is a medical heat shrink tube that has lubricity, flexibility, and electrical insulation properties, widely used in electric scalpels, endoscopes, and more.

• Other physicochemical equipment

It is used for the removal of heat shrink tubing, paint, adhesives, etc.

• Other machine tools

We use heat shrink tubing made of flame-retardant polyolefin material. It has excellent durability for labeling and does not require outer layer protection. The heat shrink tubing is pre-cut, making it easy to work with. It is ideal for wire labeling.

• Other terminal blocks

This is a bridge-type polyethylene heat shrink tube. It has excellent durability for signage and does not require outer layer protection. The tube can be cut (the minimum cutting length is 10 mm).

• Other process controls

The inner surface is coated with a thermoplastic polyamide resin, which provides excellent waterproofing, making it suitable for waterproof protection of crimp terminals and screw joints, as well as preventing disconnection due to vibrations.

• Crimp Terminal

The inner surface is coated with a thermoplastic polyamide resin, which provides excellent waterproofing, making it suitable for waterproof protection of crimp terminals and screw joints, as well as preventing disconnection due to vibrations.

• Crimp Terminal

This is a small circular spool pack of G5, G1, and G5YG heat shrink tubing. It is convenient for use and storage.

• Resistors

Due to its thin thickness and the ability to shrink at low temperatures, it allows for a reduction in shrinkage time. This is a heat shrink tube that can be used to protect parts that cannot be subjected to heat due to their low-temperature shrinkage.

• Other electronic parts

This is a heat shrink tube commonly used for the protection of electrical insulation products, elements, terminals, joints, as well as for bundling wires, cables, and marking the colors of electronic components.

• Other electronic parts

It is resistant to acids, solvents, and fuels. It is ideal for protecting coatings. It has excellent high-temperature resistance, wear resistance, and electrical insulation properties.

• Resin mold

This is a very convenient tube that has good workability in finishing operations and also has the ability to expand its inner diameter. It is made of weather-resistant PET fiber. It is a PET fiber sleeve that naturally gathers into a "no" shape. It is easy to remove, making it possible to use as a substitute for corrugated tubes.

• Other machine tools

This is a self-flap sleeve made from polyester fibers. The sleeve, made from a flexible material, excels in noise absorption and shock resistance. It is also easy to remove, making it a suitable alternative to corrugated tubes.

• Other Auto Parts

The inner surface of the tube is coated with a thermofusible adhesive, making it ideal for protecting cables, wiring, connectors, etc., that require waterproofing.

• Other electronic parts

This is a very convenient tube with good workability in finishing operations and the ability to expand its inner diameter. It is made of weather-resistant PET fiber. The PET fiber sleeve naturally gathers into a "no" shape. It is also easy to remove, making it a viable alternative to corrugated tubes.

• Other machine tools

This is a sleeve woven from PET monofilament fiber. It is used for bundling harnesses, cables, heavy equipment, and protecting fishing rods. There are flame-retardant and inexpensive non-flame-retardant options available.

• Other electronic parts

The inside of the cap is coated with adhesive, allowing it to be completely sealed and waterproof after shrinkage. The outer layer is made of semi-rigid polyolefin material, which provides excellent abrasion resistance and chemical corrosion resistance.

• Other terminal blocks

The inner surface of the shrink tube contains a solder ring, allowing for simultaneous connection of wires. Additionally, there is adhesive on the inner surface of the tube, providing waterproofing.

• Other Connectors

It is resistant to most acids and oils. It is suitable for the protection of batteries, capacitors, and fluorescent lights.

• Lithium-ion battery

This is a heat shrink tube made from a flexible polyolefin high-temperature resistant material. It is a tube specifically designed for protecting automotive wire harnesses that can be used in liquid states of diesel and lubricants. It is ideal for insulation protection of products used in harsh environments.

• Engine parts

It is ideal for protecting ship harnesses due to its excellent waterproof and saltwater resistance.

• Other electronic parts