栃木屋 List of Products and Services

It is a foot equipped with a swivel function on the adjustment bolt, allowing it to adapt to the slope of the ground surface.

• Other machine elements

It can also be used for woodworking.

• Other machine elements

It is a low-cost foot for heavy use.

• Other machine elements

This is a stainless steel adjustable foot. It is suitable for heavy machinery as it uses a thick adjustment bolt. The use of a thrust bearing inside the foot allows for smooth operation and height adjustment.

• Other machine elements

To meet a wide range of needs, we have prepared two types of materials: stainless steel and iron. ★ The foot part is made of cast material, allowing it to be used for heavy-duty purposes.

• Other machine elements

To meet a wide range of needs, we have prepared two types of materials: stainless steel and iron. ★ The foot part is equipped with a hex nut for easy installation.

• Other machine elements

This is an adjustable foot with a large swivel angle for use on inclined surfaces. To make installation easy with a screwdriver, a cross-shaped hole pin is pressed into the bottom surface.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in conjunction with casters. The installation is made easy with a cross hole on the bottom surface for a screwdriver.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters.

• Other machine elements

The foot is made of polyethylene, which provides excellent water resistance and chemical resistance.

• Other machine elements

Adopting a conical shape to distribute the load, a thrust ring is used instead of bearings at the contact points of the swivel section. A plastic adjustable foot with protrusions has been designed to facilitate easy manual rotation.

• Other machine elements

It is a simple adjustable foot made of stainless steel.

• Other machine elements

This is an adjustable foot made of silicone rubber, which excels in non-contaminating properties. It prevents dirt from office and factory floor rubber. The bottom surface is designed with a cross hole for easy installation with a screwdriver.

• Other machine elements

This is an adjustable foot that uses non-contaminating silicone rubber for the foot pad. The screw section is longer to accommodate larger diameter casters. Custom sizes (under 200mm) can also be produced (made to order). To facilitate easy installation with a screwdriver, a cross hole is provided on the bottom surface.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters. The installation is made easy with a cross-shaped hole on the bottom surface for a screwdriver.

• Other machine elements

The adoption of large-diameter rollers and minimizing the clearance of the roller bearing parts allows for low noise and high-speed linear motion. With the use of aluminum alloy rails and plastic rollers, it is compact and lightweight.

• Other machine elements

This is a set product that includes a stainless steel slide rail with a retraction mechanism. The simple damper slows down the drawer for a smooth closing.

• Other machine elements

The spring action pulls the drawer all the way in. Additionally, the effect of the damper reduces the impact force and noise when closing heavy drawers, among others. This not only minimizes the impact on the housing but also reduces the impact on the items inside the drawer, helping to prevent tipping or strong contact within the drawer.

• Other machine elements

We can also produce ultra-compact slide full travel (a method where the inner member's pull-out length is equal to or greater than the outer member's length) in nickel-plated specifications.

• Other machine elements

Ultra-small slide 3/4 travel (a method where the drawer amount of the inner member is approximately 3/4 of the length of the outer member) can also be produced with a nickel-plated specification.

• Other machine elements

We can also manufacture ultra-compact slide-over travel (a method where the inner member moves bidirectionally beyond the length of the outer member) in a nickel-plated specification.

• Other machine elements

We can also manufacture ultra-compact slide linear motion (a method where the inner member moves within the length of the outer member) with a nickel-plated specification.

• Other machine elements

Both the outer rail and inner rail are equipped with slopes, allowing the drawer to be naturally, reliably, and automatically retracted just before it closes. The outer circumference of the rollers is made of polyurethane rubber, providing quiet and smooth movement. Since the inner rail of the right rail is of the closed type, there is less lateral play in the drawer. Each member is removable.

• Other machine elements

These are special brackets for fixing TM-167 and TM-168 to the chassis. There are three types available depending on the shape of the rail and the rated load.

• Other machine elements

The drawer member can be removed, making maintenance and checks easy to perform. The locking mechanism prevents the equipment from reverting.

• Other machine elements
• Other machine elements

It is a low-cost slide rail with a large fixed load capacity.

• Other machine elements

This is a low-cost simple slide rail that uses rollers instead of ball bearings. ★ The rollers are made of polyacetal resin, which offers excellent wear resistance. It has a low friction coefficient, allowing for smooth, low-noise rotation, and it does not damage the counterpart material. Each member is detachable.

• Other machine elements

The rollers are made of polyacetal resin, which provides excellent wear resistance. They have a low friction coefficient, allowing for smooth, low-noise rotation.

• Other machine elements

We use a flexible material that does not chip or crack, and it has excellent workability.

• Other machine elements

We use materials rich in flexibility, so they do not chip or crack, and they have excellent workability. They are also superior in heat resistance, weather resistance, and chemical resistance, and possess excellent magnetic properties.

• Other machine elements

(1) It has excellent weather resistance, cold and heat resistance, and chemical resistance (acid and alkali). ★ (2) Since the compressive load (stress) is small, it does not deform the structure after filling the joints. ★ (3) It can be easily compressed. ★ (4) It adapts to gaps with rough surfaces and the expansion and contraction of structures with temperature differences, ensuring good water tightness. ★ (5) During heating or compression, no components leak out from the foam. ★ (6) It is lightweight (specific gravity 0.15), and the foam does not fuse together, making installation and storage easy.

• Other machine elements

It is a dustproof rubber available in various sizes.

• Other machine elements

The cross-sectional shape is U-shaped, which firmly holds the mounting plate and enhances sealing performance.

• Other machine elements

This is a sponge rubber for dust prevention. The materials are chloroprene and silicone, and there are three shapes available in a variety of dimensions. We will cut it to your desired length. *Please consult us regarding delivery times.

• Other machine elements

This is a hook for quickly securing chains and wire ropes with a diameter of up to φ8mm.

• Other machine elements

The hook part and the head can rotate 360°, so there is no twisting or tangling. It comes with a stopper, so there is no worry about the wire rope coming loose.

• Other machine elements

The hook part and the head can rotate 360°, so there is no twisting or tangling. It comes with a stopper, so there is no worry about the wire rope coming loose.

• Other machine elements

This is a fitting for attaching chains with a diameter of up to φ5mm to a chassis or similar.

• Other machine elements

It is a fitting for securing chains, etc., for light loads to the chassis and other structures.

• Other machine elements

This is a rope with excellent properties such as resistance to corrosion, heat, and low temperatures. It enables structural compactness and cost reduction that could not be achieved with conventional gears, levers, cams, and cranks.

• Other machine elements

This is a stainless steel ball chain. We will manufacture it to your desired length. ★*Since it is made to order, please consult us regarding the delivery time.

• Other machine elements

This is a stainless steel ball chain. We will manufacture it to your desired length. ★*As this is made to order, please consult us regarding the delivery time.

• Other machine elements

This is a decorative lightweight chain. We can manufacture it to your desired length. ★*Please consult us regarding the delivery time as it is made to order.

• Other machine elements

This is a decorative light-duty chain. We will manufacture it to your desired length. ★*Please consult us regarding the delivery time as it is made to order.

• Other machine elements