栃木屋 Product Lineup

This is a retractable hanger hook with a damper effect. It can be used not only for hanging coats but also as a handle or pull for small doors. There are two types of installation: one that is clamped from the back with a bracket and screws (TM-312-1), and another that is directly screwed from the front (TM-312-2).

• Other machine elements

This is a compact, foldable coat and hat rack. When in use, you can pull out the hanger section to hang clothes, and when not needed, you can neatly store the hanger section away.

• Other machine elements

We used resin as the main material, achieving a compact and low-cost design.

• Other machine elements

It is a ground terminal with low resistance.

• Other machine elements

This is a spacer-type welding nut suitable for fixing the base for equipment installation inside the box. It can also be manufactured in other dimensions.

• Other machine elements

The screw section is longer than the JIS standard, so it can adequately accommodate thick panels.

• Other machine elements

It is a hook used for the movement, towing, and installation of machinery and vehicles.

• Other machine elements

This is a hook used for the movement, towing, and installation of machinery and vehicles.

• Other machine elements

Since we are using a band in a strip shape, please use it for thin-walled tubes, hoses, etc.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner brackets used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner fittings used for various metal and woodworking enclosures and cases.

• Other machine elements

These are corner fittings used for various metal and woodworking enclosures and cases.

• Other machine elements

This is a card holder for attaching various nameplates and classification cards to equipment enclosures.

• Other machine elements

It is equipped with a swivel function on the adjustment bolt, allowing it to accommodate uneven surfaces.

• Other machine elements

It is a foot equipped with a swivel function on the adjustment bolt, allowing it to adapt to the slope of the ground surface.

• Other machine elements

It can also be used for woodworking.

• Other machine elements

It is a low-cost foot for heavy use.

• Other machine elements

This is a stainless steel adjustable foot. It is suitable for heavy machinery as it uses a thick adjustment bolt. The use of a thrust bearing inside the foot allows for smooth operation and height adjustment.

• Other machine elements

To meet a wide range of needs, we have prepared two types of materials: stainless steel and iron. ★ The foot part is made of cast material, allowing it to be used for heavy-duty purposes.

• Other machine elements

To meet a wide range of needs, we have prepared two types of materials: stainless steel and iron. ★ The foot part is equipped with a hex nut for easy installation.

• Other machine elements

This is an adjustable foot with a large swivel angle for use on inclined surfaces. To make installation easy with a screwdriver, a cross-shaped hole pin is pressed into the bottom surface.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in conjunction with casters. The installation is made easy with a cross hole on the bottom surface for a screwdriver.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters.

• Other machine elements

The foot is made of polyethylene, which provides excellent water resistance and chemical resistance.

• Other machine elements

Adopting a conical shape to distribute the load, a thrust ring is used instead of bearings at the contact points of the swivel section. A plastic adjustable foot with protrusions has been designed to facilitate easy manual rotation.

• Other machine elements

It is a simple adjustable foot made of stainless steel.

• Other machine elements

This is an adjustable foot made of silicone rubber, which excels in non-contaminating properties. It prevents dirt from office and factory floor rubber. The bottom surface is designed with a cross hole for easy installation with a screwdriver.

• Other machine elements

This is an adjustable foot that uses non-contaminating silicone rubber for the foot pad. The screw section is longer to accommodate larger diameter casters. Custom sizes (under 200mm) can also be produced (made to order). To facilitate easy installation with a screwdriver, a cross hole is provided on the bottom surface.

• Other machine elements

This is an adjustable foot that uses rubber on the contact surface for a non-slip effect. It can be used more conveniently in combination with casters. The installation is made easy with a cross-shaped hole on the bottom surface for a screwdriver.

• Other machine elements

The adoption of large-diameter rollers and minimizing the clearance of the roller bearing parts allows for low noise and high-speed linear motion. With the use of aluminum alloy rails and plastic rollers, it is compact and lightweight.

• Other machine elements

This is a set product that includes a stainless steel slide rail with a retraction mechanism. The simple damper slows down the drawer for a smooth closing.

• Other machine elements

The spring action pulls the drawer all the way in. Additionally, the effect of the damper reduces the impact force and noise when closing heavy drawers, among others. This not only minimizes the impact on the housing but also reduces the impact on the items inside the drawer, helping to prevent tipping or strong contact within the drawer.

• Other machine elements

We can also produce ultra-compact slide full travel (a method where the inner member's pull-out length is equal to or greater than the outer member's length) in nickel-plated specifications.

• Other machine elements

Ultra-small slide 3/4 travel (a method where the drawer amount of the inner member is approximately 3/4 of the length of the outer member) can also be produced with a nickel-plated specification.

• Other machine elements

We can also manufacture ultra-compact slide-over travel (a method where the inner member moves bidirectionally beyond the length of the outer member) in a nickel-plated specification.

• Other machine elements

We can also manufacture ultra-compact slide linear motion (a method where the inner member moves within the length of the outer member) with a nickel-plated specification.

• Other machine elements