栃木屋 Product Lineup

Torque value 1.96 N·m (20 kgf·cm). There are three types of braking directions: bidirectional, right, and left. It can slowly and quietly close the lids of Western-style toilet seats, electronic pianos, electronic organs, and other covers.

• Other machine elements

This is a damper guide for TM-316 and TM-318. For prototypes or small batches, the installation is done with screws. For mass production, integrated molding of the damper guide is also possible. Please feel free to consult us.

• Other machine elements

This is a shock-absorbing component that utilizes the viscosity of oil. It allows for smooth and quiet opening and closing, as well as reciprocating motion of lids and doors (2WAY specification).

• Other machine elements

This is a shock-absorbing component that utilizes the viscosity of oil. It allows for smooth and quiet opening and closing, as well as reciprocating motion of lids and doors (2WAY specification).

• Other machine elements

This product makes it easy to install gas springs.

• Other machine elements

It is suitable for the opening and closing of small device doors.

• Other machine elements

This is a bracket and mounting bolts for gas springs. Using this product makes installation easy.

• Other machine elements

It is a gas spring that can generate almost constant spring force over a long compression stroke.

• Other machine elements

It is a gas spring that can generate almost constant spring force over a long compression stroke.

• Other machine elements

This is a small type of TM-150. Please use it for opening and closing the doors or lids of small devices.

• Other machine elements

This is a bracket with a detachable function for the TM-149 series. The gas spring can be attached and detached with a single touch, without the use of tools.

• Other machine elements

When the door is opened, it enters a locked state due to the operation of the stopper (the stay slides and falls onto the stopper). The door is fixed in the open position, and by pressing the stopper mounting axis, the stay can slide, allowing the door to be closed as it is.

• Other machine elements

It is a sister product of TM-223. By adopting a simple stopper, it firmly supports the door. Additionally, the built-in spring gives it a smart appearance.

• Other machine elements

The adoption of a safety lock firmly secures the door. Additionally, the lock release uses a one-touch method that simply slides the stopper on the front of the stay. Combined with the built-in spring, it results in a very sleek appearance.

• Other machine elements

We are using a cushion, so it softens the impact when the lid is opened.

• Other machine elements

We are using a cushion, so it softens the impact when opening the lid.

• Other machine elements

It can be used for both left and right.

• Other machine elements

This is a highly functional stay for the front cover. It is designed with an angle slightly less than 180° when opened.

• Other machine elements

It is compact and does not take up installation space.

• Other machine elements

It is compact and does not take up installation space.

• Other machine elements

This is a stainless steel adjustable stay for the upper lid and canopy that can be locked in five stages in the contraction direction.

• Other machine elements

This is a stop stay with improved safety compared to conventional products. By adopting a 6mm step, the opening angle of doors and lids can be freely set. The stay lock can be engaged by simply turning the handle 90 degrees. Additionally, locking and unlocking can be done with ease, ensuring safe and secure fixation. In the UNLOCK state, it will not move unless a force of approximately 29.4N (3kgf) is applied.

• Other machine elements

This is a stainless steel stay with a one-touch mechanism. Its sleek, linear design and the calm texture unique to stainless steel enhance the elegance of the cabinet. Made entirely of metal and using SUS304 stainless steel, which is resistant to rust, it can be safely used in areas where fire is handled, such as range hoods. When the door is closed, the movable end of the stay fits inside the stay body, allowing for effective use of the cabinet's interior. There is no difference between the left and right sides of the body and brackets.

• Other machine elements

When you open the lid, it enters a holding state due to the operation of the rotary mechanism. When closing, lifting the lid slightly will release the stopper.

• Other machine elements

This is a bracket for the upper cover that can be separated from the bracket section. Since there is no need for tasks such as removing screws with a screwdriver, it can be detached with a single touch, making maintenance tasks easy to perform.

• Other machine elements

There is a simple stopper in the central part.

• Other machine elements

The full opening angle is 180°, and the stay has a detent mechanism at every 45° position.

• Other machine elements

This is a stay that activates the stopper when the lid is opened. When closing, the stopper is released by slightly lifting the lid.

• Other machine elements

This is a stay that activates the stopper when the lid is opened. When closing, the stopper is released by slightly lifting the lid.

• Other machine elements

There is a simple stopper in the central part.

• Other machine elements

There is a simple stopper in the central part.

• Other machine elements

This is a general-purpose bracket with smooth rotation.

• Other machine elements

This is a stay that activates the stopper when the lid is opened. When closing, the stopper is released by slightly lifting the lid.

• Other machine elements

This is a stay with a simple stopper structure that allows the axis to drop into the groove of the arm and stop.

• Other machine elements

It is compact and does not take up installation space.

• Other machine elements

It is compact and does not take up installation space.

• Other machine elements

This is a one-way type soft down stay used for relatively lightweight doors. The braking speed can be adjusted according to the size and weight of the door.

• Other machine elements

It is an easy-to-grip seven-sided knob.

• Other machine elements

It is an easy-to-grip seven-sided knob.

• Other machine elements

It is a metal knob that withstands heavy use.

• Other machine elements

It is a metal knob that withstands heavy use.

• Other machine elements

This is a washer that can be easily inserted into the tips of bolts and fasteners to prevent them from falling off or coming loose. It can also be used to prevent scratches on the surface of panels and chassis.

• Other machine elements

This is a washer that can be easily inserted at the tip of bolts and fasteners to prevent them from falling out or being removed. It can also be used to prevent scratches on the surface of panels and chassis. This product is for stepped applications.

• Other machine elements

This is a fastener for preventing screw drop. It allows for easy installation work, ensuring that screws do not come loose from the movable panel.

• Other machine elements

It is a nut that can be tightened even if there is some misalignment at the center. The mounting part has been tapped for easier installation.

• Other machine elements