栃木屋 Product Lineup

This is a latch unit with a built-in solenoid. When closing the door, you can simply push it in as is; when opening it, you can operate it using the power switch (not possible when locked). Additionally, it also has a mechanical lock built in for emergency use (TL-258-1, TL-259-1).

• Other machine elements

This is a washer that achieves a retention effect by pressing onto the tips of screws and bolts after panel insertion. The claws fit with the threaded part, providing a strong effect.

• Other machine elements

By closing the door, the latch engages with the keeper and locks. At this time, the keeper presses the switch plate, causing the micro switch to turn ON (COM (yellow) - NO (blue)). By supplying power to the solenoid, the latch lock is released (red-white: DC24[V]). *Only the lock is released; the latch itself does not operate. In this state, pulling the door allows you to detach the keeper from the latch. By combining it with various locks, it can be unlocked with a key in an emergency (this product does not include a lock or key). The mounting holes are countersunk on both sides, allowing for installation on either side.

• Other machine elements

This is a latch unit incorporating a solenoid. It locks by pushing the door in and unlocks by applying power. The locking and unlocking status of the latch can be detected by a microswitch. Additionally, the tip of the latch can be fixed at 90° intervals, allowing it to be adjusted according to the direction of use. The TL-398-1 also includes a mechanical lock for emergency use.

• Other machine elements

It is a simple fastener that stops the panels. It can also be used for filling holes.

• Other machine elements

It is a locking device that maintains a secure lock state to prevent doors and the like from opening in response to vibrations or impacts.

• Other machine elements

-

• Other machine elements

This is a latch for door-in-storage type. Locking and unlocking with the rod can be easily done with just lever operation.

• Other machine elements

The design seeks operability and safety, making it particularly suitable for equipment with vibrations.

• Other machine elements

By rotating the grip 90°, the pin lock is activated and automatically locks. It can be used with confidence, especially with equipment that has vibrations.

• Other machine elements

The door can be opened and closed with a one-touch operation.

• Other machine elements

This is a latch-reversing stopper that easily secures the lid just by pushing it in. It holds the latch with a spring, which also absorbs vibrations.

• Other machine elements

To open the door panel, insert a pushing tool such as a flathead screwdriver into the jig insertion port provided on the door panel and swing the latch to release it. After the door panel is opened, the latch will return to the locked position due to the force of the spring, so the door panel will lock simply by closing it.

• Other machine elements

The receiving bracket is pulled and tightened by the action of the spring.

• Other machine elements

You can lock and unlock with just a push operation.

• Other machine elements

It is a latch that can lock the lid with a single touch.

• Other machine elements

I have set the handle and latch together. The lock is just pushed in.

• Other machine elements

TL-197: This is a simple latch with an integrated latch and lever. By using the panel stopper, you can easily adjust the play of the panel. ★TL-287: This is a simple stopper for the panel.

• Other machine elements

"Free Stop Hinge (One Way) TH-164" ● Can be stopped at any position ● Added one-way mechanism ● Torque in the opening direction is almost zero, allowing it to be lifted by the weight of the lid alone

• Other machine elements

This is a waterproof cylinder lock with a key for the distribution board locking handle (No. 200). ★ Locking and unlocking can be confirmed by the "color" of the indicator.

• Other machine elements

It is a display device that allows visual confirmation of the locking and unlocking of a door, in combination with locking components such as locks and handles.

• Other machine elements

It is a lock with a thick stop fitting.

• Other machine elements

It is a low-cost simple lock.

• Other machine elements

It is a low-cost simple lock.

• Other machine elements

It is equipped with a detent mechanism that provides a locking sensation.

• Other machine elements

It is a lock that can be flush with the panel surface depending on the installation method.

• Other machine elements

It is a lock with a thick stop fitting.

• Other machine elements

It is a compact, low-cost simple lock with a short depth.

• Other machine elements

It is a retainer-type lock that is easy to install.

• Other machine elements

The key for the locking handle of the distribution board (No. 200) is available for use. It has a shutter, which prevents the entry of foreign objects.

• Other machine elements

This is a cylinder lock with a cap on the keyhole area, providing high dustproof effectiveness.

• Other machine elements

The key is an excellent reversible type with outstanding operability.

• Other machine elements

The key is an excellent operability reversible type. It is a short type.

• Other machine elements

The key features a user-friendly reversible design. Its compact size allows for efficient use of space. The fastener is fixed, making installation easy.

• Other machine elements

The key is an excellent reversible type with great operability. It is a long type.

• Other machine elements

It is a waterproof cylinder lock.

• Other machine elements

This is a cylinder lock that can be made with a master key specification (made to order). In the case of the master key specification, it can be operated with the same key as the THA-409M, which improves work efficiency.

• Other machine elements

This is a lock that meets the standards of the Japan Vending Machine Manufacturers Association. It uses a free-spinning ring to prevent torsional breakage. It is also possible to accommodate a master key specification (made to order).

• Other machine elements

This is a lock for vending machines certified by the Japan Vending Machine Manufacturers Association. It features a free-spinning ring to prevent twisting and breaking. It can also be customized to accommodate a master key specification (made to order).

• Other machine elements

This is a lock for vending machines certified by the Japan Vending Machine Manufacturers Association. It features a free-spinning ring to prevent twisting and breaking. It can also be customized to accommodate a master key specification (made to order).

• Other machine elements

This is a lock for vending machines certified by the Japan Vending Machine Manufacturers Association. It features a free-spinning ring to prevent twisting and breaking. It is also possible to accommodate a master key specification (made to order).

• Other machine elements

This is a compact and small-diameter type of FK lock developed in conjunction with the miniaturization of various devices. Even though it is smaller, the level of security remains unchanged from the conventional FK lock. Additionally, we have prepared two types: a retainer type that considers the reduction of installation labor and a standard type with a mounting nut. By rearranging the fastening hardware, it is possible to change the orientation of the fastening hardware.

• Other machine elements

The cap and shutter provide excellent dust and drip resistance. It features a two-row pin structure that makes picking difficult. A free-spinning ring is used to prevent torsional breakage.

• Other machine elements

This is a compact and small-diameter type of FK lock developed in response to the miniaturization of various devices. It is compatible with the mounting holes of TL-225. Even in a smaller size, a master key specification (made to order) is possible. ★ It is a retainer type designed to reduce installation labor. By rearranging the fastening hardware, it is possible to change the orientation of the fastening hardware.

• Other machine elements

This is a compact and small-diameter type of FK lock developed in conjunction with the miniaturization of various devices. Even though it has been miniaturized, the level of security remains unchanged. It is a reversible type that can be used on both the left and right by rearranging the direction of the fastening hardware.

• Other machine elements