浪越エレクトロニクス Product Lineup

The MC-330 is a motor controller that allows you to control the battery's current consumption, making power management easy. No settings for advance angle or sensor connections are required. Turning the volume to the right increases output, while turning it to the left engages regenerative braking. Additionally, the RST line can be connected to any terminal. 【Features】 - Easy power management (for example, constant operation at 5A consumption) - Unique control expected to improve efficiency at low to mid speeds - No settings for advance angle required, no sensor connections needed (simple) - Turning the volume to the right increases output, turning it to the left engages regenerative braking (straightforward) - RST line can be connected to any terminal (order does not matter) - Sensorless design ensures optimal advance angle at all times *For more details, please refer to the PDF document or feel free to contact us.

• controller

The "MD-660" is a motor driver that can be used in combination with a DC/DC converter or our motor power controller "MPC-550." It is suitable for rotor types with permanent magnets. By turning the volume, it sends a proportional current (power) to the motor. Additionally, it steps down or steps up the battery voltage as needed. 【Features】 ■ Sensorless ■ For brushless motors ■ Sends a proportional current (power) to the motor when the volume is turned ■ Steps down or steps up the battery voltage as needed *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MPC-550" is a DC/DC converter that can increase or decrease voltage. The input voltage ranges from 12 to 150V (up to 10 batteries in series). It is mainly used for solar cars, where increasing the voltage also increases speed. In addition to motor applications, it can be used for charging electric double-layer capacitors from a battery. 【Features】 ■ Turning the volume sends a proportional current (power) to the motor. ■ Depending on the situation, it can step down or step up the battery voltage. *For more details, please refer to the PDF document or feel free to contact us.

• controller

The "Wind Power Generation Tracker (Maximum Power Point Tracking)" efficiently sends the power from the wind turbine to the battery. It optimizes power intake and can suppress the increase in rotation speed during strong winds. Additionally, it captures the output voltage V1 as a function of wind power and automatically adjusts the power sent to the load to an appropriate level. (In practice, this involves variable step-down ratios of a DC/DC converter operating in direct current to adjust the power sent to the battery.) 【Features】 ■ Battery voltage: 24–48V ■ Rotor type: Permanent magnet ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• Other energy equipment

The "PV-757" is a solar cell checker that allows you to check the current power generation (W), cumulative energy (kWh), and total generation time with this device alone. It is equipped with a simplified MPPT. When used with our "DEMO-W2," it can be displayed in a large format, making it suitable for demonstrations. (Please let us know as a pulse output terminal is required.) 【Features】 ■ Measurement and display can be done with this product alone ■ Simply connect two wires from the solar cell output ■ No external power supply is needed ■ Operates on the power of the solar cell (however, a power supply is required for a large display) ■ Utilizes the power measurement circuit of our DC power meter (DW-777) *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generator

The SC-801 is a controller that regulates the speed of electric tools. When the rotation decreases, the power increases, and because it uses a sine wave, the control is smooth and soft. It is used by carpenters, plasterers, and construction workers with electronic tools such as electric drills, electric circular saws, sanders, jigsaws, and routers. 【Features】 ■ The rotation speed can be freely adjusted to match the work ■ Lowering the rotation slows down the cutting speed but reduces noise ■ It is much safer than suddenly spinning at high speed ■ When the rotation drops below the set level, it automatically increases power *For more details, please download the PDF or feel free to contact us.

• Other process controls
• Other work tools
• Work tools