V-net AAEON List of Products and Services

Industrial mPCIe - Insulated RS-422×2 & RS-485×2 port conversion adapter with the following features: ● Compliant with PCI-Express specification Rev. 2.0 ● Maximum 10 Mbps serial data rate (16C550 compatible, 256-byte FIFOs) ● Port-PC isolation support, compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Switch-configurable termination resistors ● Wide temperature range support ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe-isolated RS485×4 port conversion adapter has the following features: ● Compliant with PCI-Express specification Rev. 2.0 ● Maximum 10 Mbps serial data rate (16C550 compatible, 256-byte FIFOs) ● Port-PC isolation support, compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Switch-configurable termination resistors ● Wide temperature range support ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232/422/485×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Soft switchable between RS-232/422/485 modes ● RS-232 supports a maximum serial data rate of 1 Mbps, while RS-422/485 supports up to 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● Usable in various systems due to conversion with daughterboard and cable + DB-9 connector board ● Jumper settings on the daughterboard allow selection of 5V/12V output ● ESD protection included ● Termination resistors included on the daughterboard ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Maximum serial data rate of 1Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● Supports CTS/RTS hardware control ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe to RS-232 x2 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS232 supports a maximum serial data rate of 1Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● Supports CTS/RTS hardware control ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe-RS-422/485×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS-422/485 mode can be set via a switch ● Supports 485HD (half-duplex) and 485FD (full-duplex) ● RS422/485 supports a maximum serial data rate of 15Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-422/485×2 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS-422/485 mode can be set via a switch ● Supports 485HD (half-duplex) and 485FD (full-duplex) ● RS422/485 supports a maximum serial data rate of 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232/422/485 conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Software switchable between RS-232/422/485 modes ● RS232 supports a maximum serial data rate of 1 Mbps, and RS422/485 supports a maximum of 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with a wide temperature range (-40 ºC to 85 ºC) ● Usable in various systems due to conversion with daughterboard and cable + DB-9 connector board ● Jumper settings on the daughterboard allow selection of 5V/12V output ● Termination resistors included on the daughterboard ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial PCIe-isolated PoE/PoE+ ×4 conversion adapter has the following features: ● Isolated GbE LAN ×4 ports ● Independent PSE channels ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEEE 802.3at (up to 25.5W @ 52V/PoE port) ● Supports DC 12~24V input with a 6-pin PCIe ATX connector ● Supports a maximum total power of 75W for 4 PoE ports (up to 25.5W per port) ● Compliant with EN61000-4-5 2kV surge protection ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT protection ● 30μ golden finger

• Expansion Boards

The industrial M.2 conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● DC jack type, compatible with DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial M.2 conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● 4-pin header type, compatible with DC12-24V input ● Compliant with IEEE 802.3af (maximum 15.4@48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe - PoE+ conversion adapter has the following features: ● Isolated Gigabit LAN ports x2 ● Two independent PSE channels ● Supports DC 19V~24V power input with 4-pin header type ● Compliant with IEEE 802.3at (maximum 25.5W @ 52V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to PoE conversion adapter has the following features: ● Isolated Gigabit LAN ports x2 ● Two independent PSE channels ● DC jack type supporting DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to PoE conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● 4-pin header type, compatible with DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W at 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts mPCIe to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems due to conversion with daughterboard and cables ● Available in two models: mounting hole type for embedded applications and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is of horizontal type

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts from mPCIe to isolated Gigabit LAN x1 port ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable with various systems through conversion with daughter boards and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is horizontal type

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts mPCIe to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems as it converts with daughterboard and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is of vertical type

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts from mPCIe to isolated Gigabit LAN x1 port ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable with various systems through conversion with daughterboard and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is of vertical type

• Expansion Boards

The industrial M.2-to-isolated Gigabit LAN conversion adapter has the following features: ● Converts M.2 2242 B-M to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems due to conversion with daughterboard and cables ● Wide temperature model available ● −30μ” golden finger

• Expansion Boards

The industrial M.2-isolated Gigabit LAN conversion adapter has the following features: ● Converts M.2 2242 B-M to isolated Gigabit LAN x1 port ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems due to conversion with daughterboard and cable ● Available in wide temperature model

• Expansion Boards

The industrial M.2 to isolated Gigabit LAN conversion adapter has the following features: ● Converts M.2 2280 to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems as it converts with a daughterboard and cable ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model also available ● 30μ” golden finger

• Expansion Boards

The industrial M.2 to isolated Gigabit LAN conversion adapter has the following features: ● Converts M.2 2280 to isolated Gigabit LAN x1 port ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems by converting with daughter boards and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model also available ● 30μ” golden finger

• Expansion Boards

Industrial mPCIe - VGA & 18/24-bit LVDS conversion adapter features the following: ● VGA output with a maximum vertical rate of 75Hz, 1920x1080 ● Maximum resolution for LVDS is 1600 x 1200 ● The EMPV-1202-C1VN/W1VN model supports 18-bit panels and 24-bit JEIDA LVDS ● The EMPV-1202-C2VN/W2VN model supports 24-bit VESA LVDS ● Screen can be rotated 90º, 180º, and 270º ● Wide temperature models are also available ● 30μ” golden finger

• Expansion Boards

Industrial 2.5-inch SSD - Dual M.2 RAID conversion adapter with the following features: ● Converts SATA to dual M.2 (2.5-inch SSD - M.2 Key-B 2242/2260/2280 x 2 slots) ● Supports H/W RAID 0/1 via SATA ● Equipped with a pin header for LED connection

• Expansion Boards

Industrial 2.5-inch SSD - Dual mSATA conversion adapter with the following features: ● Converts SATA to dual mSATA (2.5-inch SSD - 2 mSATA slots) ● Supports H/W RAID 0/1 via SATA ● Equipped with a pin header for LED connection

• Expansion Boards

The industrial mPCIe dual SATAIII RAID conversion adapter has the following features: ● Converts mPCIe to 2 SATA III ports ● Low power consumption ● Supports AHCI and Port-Multiplier ● Supports Native Command Queuing ● Supports Hardware RAID 0 and RAID 1 ● 30μ" golden finger

• Expansion Boards

The industrial M.2 2242 dual SATA III RAID conversion adapter has the following features: ● Converts SATA to dual SATA III ports with Port Multiplier ● Supports H/W RAID 0/1 over SATA ● 30μ" golden finger ● Wide temperature model also available

• Expansion Boards

The industrial mSATA dual SATA III RAID conversion adapter has the following features: ● Changes from mSATA to dual SATA III with Port Multiplier ● Supports SATA H/W RAID 0/1 ● Wide temperature model also available ● 30μ" golden finger

• Expansion Boards

Industrial PCIe - SATA III×4 port conversion adapter with the following features: ● Converts PCIe to SATA III×4 ports ● Automatic switching between SATA port #4 and mSATA ● Supports AHCI and Port-Multiplier ● Supports Native Command Queuing ● Supports error reporting, recovery, and collection ● Includes LED connection pin header ● 30μ golden finger

• Expansion Boards

Industrial M.2 3042 -SATA III×4 port conversion adapter with the following features: ● Converts M.2 3042 to SATA III×4 ports ● Supports AHCI and Port-Multiplier ● Supports Native Command Queuing ● Supports error reporting, recovery, and collection ● 30μ golden finger

• Expansion Boards

The industrial mPCIe-USB 3.0 conversion adapter has the following features: ● Converts to mPCIe-USB with 4 ports at high data rates (5Gbps) ● Each port supports 1.5A overcurrent protection (OCP) ● Compliant with xHCI 1.0, USB 3.0 Rev 1.0 ● Two USB ports from CN1 supply limited power ● Two USB ports from CN2 operate with external power supply ● Compliant with USB Battery Charging Specification Revision 1.2 ● 30μ golden finger

• Expansion Boards
• Other network tools

The industrial mPCIe-USB 3.0 conversion adapter has the following features: ● Compliant with PCI Express Base Specification Revision 2.0 ● Compliant with Universal Serial Bus 3.0 Specification Revision 1.0 ● 2 downstream USB 3.0 ports ● EN61000-4-2 (ESD) Air-15kV, Contact-8kV compliant ● 30μ golden finger

• Expansion Boards
• Other network tools

The industrial mPCIe-SATA III conversion adapter has the following features: ● Converts to mPCIe-SATA III with 4 ports ● Supports AHCI and Port-Multiplier ● Supports Native Command Queuing ● Wide temperature model also available ● 30μ golden finger

• Expansion Boards
• Other network tools

The industrial mPCIe-SATA III conversion adapter has the following features: ● Converts to mPCIe-dual SATA III ports (mPCIe-SATA III x2 ports) ● Low power consumption ● Supports AHCI and Port-Multiplier ● Supports Native Command Queuing ● Wide temperature model also available ● 30μ golden finger

• Expansion Boards
• Other network tools

The fanless industrial PC has the following features: ● Supports Intel(R) 6th/7th generation Core i/XEON processors (sold separately) ● Intel(R) H110 PCH/C236 PCH chipset ● Expansion slots, easy installation (available in 2-slot/3-slot models) ● Models available for long cards and half-size cards ● Models available with PWM function system x fan/fanless support

• Industrial PCs
• Embedded Board Computers
• controller

This is a Micro ATX standard industrial motherboard with the following features: ● Supports Intel(R) LGA1151 socket 8th generation Coffee Lake Core i3/i5/i7 Pentium/Celeron processors (up to 65W) ● Equipped with Intel(R) H310 chipset ● DDR4 2666MHz dual-channel UDIMM with 2 slots (maximum 32GB) ● Realtek Gigabit LAN (RTL8111H) with 2 ports ● SATA III (6Gb/s) x3, M.2 (M key 2242, 2260, 2280, 22110) x1 ● USB3.1 (Gen 1) x4, USB2.0 x4 ● Supports up to 10 COM ports (COM1 and COM2 support RS232/422/485)

• Industrial PCs
• Embedded Board Computers
• controller

This is an ATX standard industrial motherboard with the following features: ● Supports Intel(R) LGA1151 socket Core i3/5/7/Pentium/Xeon E/Celeron processors ● Equipped with Intel(R) Coffee Lake processors (TDP 95W) ● DDR4 2666MHz U-DIMM x4 slots (up to 64GB) (C246 supports ECC) ● 10/100/1000 Base-TX Ethernet x2 ports ● HDMI x1, DP x1, VGA x1, DVI-D x1 ● Intel(R) Q370 chipset / C246 chipset ● Supports RS-232/422/485 x10 (including pin headers) ● SATA III (6Gb/s) supports RAID 0,1,5,10 ● PCIe x16 x2 slots, PCIe x4 x1 slot, PCIe x1 x1 slot, PCI x2 slots, M.2 x1 slot (shares with PCIex4 SATA, M key, 2242/2260/2280/22110), M.2 (2230, E key) x1

• Industrial PCs
• Embedded Board Computers
• controller

The outdoor industrial PC has the following features: ● Compliant with IP68 standard ● Equipped with Intel(R) Atom(TM) E3940 processor ● Onboard 4GB LPDDR4 memory ● Onboard 32GB eMMC ● 1 x Gigabit LAN, 1 x HDMI ● 1 x USB 3.0, 2 x RS-232 / 2 x RS-422 / 2 x RS-485 (depending on the model)

• Industrial PCs
• Embedded Board Computers
• controller

The industrial embedded BOX PC has the following features: ● Slim design with a width of 44mm ● Ideal for automation controllers ● Equipped with 2 Gigabit LAN ports and 4 USB 3.0 ports ● Operating temperature range of -30℃ to 60℃ ● DIN rail mountable

• Industrial PCs
• Embedded Board Computers
• controller

The industrial embedded BOX PC has the following features: ● Equipped with Intel(R) Core(TM) i3-6100U/Celeron(R) 3955U ● DDR4 2133MHz SODIMM slot x 1 (up to 16GB) (sold separately) ● Supports 2 Gigabit Ethernet ports ● Supports RS-232/422/485 x 4 ● Compatible with VGA + HDMI dual display output ● DC 9-30V input with power protection ● DIN rail mount design

• Industrial PCs
• Embedded Board Computers
• controller

The 10.4-inch industrial touch panel monitor has the following features: ● 10.4-inch SVGA (800 x 600) TFT LCD display ● Models available with capacitive/resistive touch screen ● Aluminum housing ● Front bezel compliant with IP65 standard ● DC 12-30V power input with overvoltage/overcurrent/overvoltage protection

• Touch Panel
• Industrial PCs
• Display

The 12.1-inch industrial touch panel monitor has the following features: ● 12.1-inch XGA (1024 x 768) TFT LCD display ● Models available with capacitive/resistive touch screen ● Aluminum housing ● Front bezel compliant with IP65 standards ● DC 12-30V power input with overvoltage/overcurrent/overvoltage protection

• Touch Panel
• Industrial PCs
• Display

The 15-inch industrial touch panel monitor has the following features: ● 15-inch XGA (1024 x 768) TFT LCD display ● Models available with capacitive/resistive touch screen ● Aluminum casing ● Front bezel compliant with IP65 standards ● DC 12-30V power input with overvoltage/overcurrent/overvoltage protection

• Touch Panel
• Industrial PCs
• Display

The 17-inch industrial touch panel monitor has the following features: ● 17-inch SXGA (1280 x 1024) TFT LCD display ● Models available with capacitive/resistive touch screen ● Aluminum casing ● Front bezel compliant with IP65 standards ● DC 12-30V power input with overvoltage/overcurrent/overvoltage protection

• Touch Panel
• Industrial PCs
• Display

The 19-inch industrial touch panel monitor has the following features: ● 19-inch SXGA (1280 x 1024) TFT LCD display ● Models available with capacitive/resistive touch screen ● Aluminum casing ● Front bezel compliant with IP65 standards ● DC 12-30V power input with overvoltage/overcurrent/overvoltage protection

• Touch Panel
• Industrial PCs
• Display