V-net AAEON Product Lineup

The PC for AI edge terminals has the following features: ● Equipped with NVIDIA Jetson Nano ● Pre-installed with JetPack 4.6.0 ● Fanless design ● Extremely compact chassis ● Expandable WIFI/Bluetooth (M.2 E-KEY 2230) ● Quad Core ARM(R) Cortex(R) A57 ● 4GB LPDDR4 memory & 16GB eMMC ● RS-232×2, USB3.2×4, Gigabit LAN×1 ● 12V 2-pin terminal block

• Industrial PCs

It features a 3.5-inch single-board computer with the following characteristics: ● Equipped with RockChip(R) ARM Cortex A72+A53 RK3399 ● Onboard DDR3L 1333MHz 2GB ● Onboard 16G flash ROM ● Includes a Micro SD card slot (supports up to 256G) ● Includes a SIM card slot ● Supports Android 7.1 and Debian 9.0

• Industrial PCs
• Embedded Board Computers
• controller

The vehicle-mounted fanless PC is equipped with the following features: ● Fanless system ● Supports 204-pin single-channel DDR3L 1866 MHz SODIMM (up to 8GB) ● DP×1, HDMI×1 ● Equipped with Realtek(R) Ethernet Connection with 5 ports, 4 of which support PoE ● Mini-PCIe sockets×2 (full size) (USB + PCIe)

• Industrial PCs
• Embedded Board Computers
• controller

This is a PCIe(4) standard 2-port Gigabit LAN PoE-compatible expansion card with the following features: ● Compliant with PCI-Express(R)[x4] Gen. 2 ● Equipped with Intel(R)i211AT, independent 2-port Gigabit Ethernet controller ● Bandwidth of 1Gb/s per port ● Supports Link Aggregation/Jumbo Frames (9 KByte) ● PoE compatible (not supported on Linux)

• Industrial PCs
• Embedded Board Computers
• controller

This PCIe(4) specification 4-port Gigabit LAN PoE compatible expansion card has the following features: ● Compliant with PCI-Express(R)[x4] Gen. 2 ● Equipped with Intel(R)i211AT, independent 4-port Gigabit Ethernet controller ● Bandwidth of 1Gb/s per port ● Supports Link Aggregation/Jumbo Frames (9 KByte) ● PoE compatible (not supported on Linux)

• Industrial PCs
• Embedded Board Computers
• controller

This is a compact fanless PC with the following features: ● Equipped with RockChip(R) ARM Cortex A53 RK3328 ● Onboard DDR3L 1333MHz 2G ● Onboard 8G flash ROM ● Gigabit LAN x1, Fast LAN x1, USB 2.0 x2, HDMI x1, OTG / DC-in x1, Audio x1 ● Includes Micro SD card slot (supports up to 64G) ● DC input 5V

• Industrial PCs
• Embedded Board Computers
• controller

The compact fanless PC has the following features: ● Equipped with RockChip(R) ARM Cortex A53 RK3328 ● Onboard DDR3L 1333MHz 2G ● Onboard 8G flash ROM ● Gigabit LAN x1, USB 3.0 x1, USB 2.0 x2, HDMI x1, OTG / DC-in x1, audio x1 ● Equipped with a Micro SD card slot (supports up to 64G) ● DC input 5V

• Industrial PCs
• Embedded Board Computers
• controller

The 1U network appliance has the following features: ● Supports Intel(R) Xeon ● Equipped with C246 chipset ● DDR4 UDIMM x4 (up to 64G) ● IPMI compatible ● Gigabit LAN x2 (I350 AM2) ● NIM slots x3 ● 2.5-inch SATA HDD bays x2, mSATA slot x1 ● Keypad with LCM x1, RJ45 console x1, USB 3.0 x2, Gigabit LAN x2 ● 220W ATX

• Touch Panel
• Industrial PCs
• Display

The 1U network appliance has the following features: ● Supports Intel(R) Xeon ● Equipped with 2 slots for DDR4 2133 SODIMM (up to 32GB) ● 1 keypad LCM, 1 RJ45 console, 2 USB3.0, 1 HDMI ● 220W ATX ● Intel(R) i211 Gigabit Ethernet x8 / Intel(R) i211 Gigabit Ethernet x6 + SFP x2 (C246 model) / Intel(R) i211 Gigabit Ethernet x6 (H310 model)

• Touch Panel
• Industrial PCs
• Display

The industrial ATX motherboard has the following features: ● Supports 8th/9th generation Intel(R) Core(TM) LGA1151 processors ● Supports DDR4 2666/2400/2133MHz DRAM (up to 64GB) ● Independent triple display: HDMI x1, VGA x1, DP x1 ● Gigabit LAN x2 ports (LAN1 supports i211AT x1, LAN2 supports i219LM x1) ● Supports USB 3.2 Gen 2 x6 ports, USB 3.2 Gen 1 x4 ports ● Equipped with M.2 slot (M key) x1, M.2 slot (E key) x1

• Industrial PCs
• Embedded Board Computers
• controller

This is a Mini ITX specification industrial motherboard with the following features: ● 2 x DDR4 SODIMM slots (up to 32GB) ● Supports independent triple display with 1 x VGA or 1 x HDMI, 1 x eDP or 1 x LVDS ● 1 x Intel(R) LAN i211AT, 1 x 219LM for iAMT 12.0 ● 1 x M.2 slot (M key) ● 1 x M.2 slot (E key) ● 1 x PCIe 3.0 [x1] slot ● 12V DC input

• Industrial PCs
• Embedded Board Computers
• controller

This is a PCIe(4) standard 2-port Gigabit LAN PoE-compatible expansion card with the following features: ● Compliant with PCI-Express(R)[x4] Gen. 2 ● Equipped with Intel(R) i211AT, independent 2-port Gigabit Ethernet controller ● Bandwidth of 1Gb/s per port ● Supports Link Aggregation/Jumbo Frames (9 KByte) ● PoE compatible (not supported on Linux)

• Industrial PCs
• Embedded Board Computers
• controller

This PCIe(4) specification 4-port Gigabit LAN PoE-compatible expansion card has the following features: ● Compliant with PCI-Express(R)[x4] Gen. 2 ● Equipped with Intel(R)i211AT, independent 4-port Gigabit Ethernet controller ● Bandwidth of 1Gb/s per port ● Supports Link Aggregation/Jumbo Frames (9 KByte) ● PoE compatible (not supported on Linux)

• Industrial PCs
• Embedded Board Computers
• controller

It features a 1.8-inch single-board computer with the following characteristics: ● Equipped with RockChip(R) ARM Cortex A53 RK3328 ● Onboard DDR3L 1600MHz 2G ● Onboard 8G flash ROM ● Includes a Micro SD card slot (supports up to 64G) ● Supports Android 7.1

• Industrial PCs
• Embedded Board Computers
• controller

It features a 1.8-inch single-board computer with the following characteristics: ● Equipped with RockChip(R) ARM Cortex A53 RK3328 ● Onboard DDR3L 1600MHz 2G ● Onboard 8G flash ROM ● Includes a Micro SD card slot (supports up to 64G) ● Supports Android 7.1

• Industrial PCs
• Embedded Board Computers
• controller

It features a 1.8-inch single-board computer with the following characteristics: ● Equipped with RockChip(R) ARM Cortex A17 RK3288 ● Onboard DDR3L 1333MHz 2G ● Onboard 8G flash ROM ● Includes a Micro SD card slot (supports up to 64G) ● Supports Android 5.1 and Debian 9.0

• Industrial PCs
• Embedded Board Computers
• controller

This is a MicroATX standard industrial motherboard with the following features: ● Supports 8th generation Intel(R) Core(TM) i processors with LGA1151 socket ● Equipped with H310 chipset ● Supports DDR4 2666/2400/2133MHz (up to 32GB) ● HDMI×1, VGA×1, DP×1 for independent dual display ● Dual Intel(R) Gigabit Ethernet ● USB3.1 (Gen1)×1, USB2.0×4 ● M.2 slot (E key)×1

• Industrial PCs
• Embedded Board Computers
• controller

This MicroATX industrial motherboard features the following characteristics: ● Supports 8th/9th generation Intel(R) Core(TM) i processors with LGA1151 socket ● Equipped with Q370 chipset ● Supports a maximum TDP of 95W ● Compatible with DDR4 2666/2400/2133MHz (up to 64GB) ● Supports independent triple display with 2 x HDMI, 1 x VGA, and 1 x DP ● Dual Intel(R) Gigabit Ethernet ● USB3.1 (Gen2) x6, USB3.1 (Gen1) x4 ● M.2 slot (E key) x1, M.2 slot (M key) x1 ● Equipped with TPM

• Industrial PCs
• Embedded Board Computers
• controller

This MicroATX industrial motherboard features the following characteristics: ● Supports 8th/9th generation Intel(R) Core(TM) i processors with LGA1151 socket ● Equipped with C246 chipset ● Supports a maximum TDP of 95W ● Compatible with DDR4 2666/2400/2133MHz (up to 64GB) ● Supports independent triple display with 2 x HDMI, 1 x VGA, and 1 x DP ● Dual Intel(R) Gigabit Ethernet ● 6 x USB3.1 (Gen2), 4 x USB3.1 (Gen1) ● 1 x M.2 slot (E key), 1 x M.2 slot (M key) ● Equipped with TPM

• Industrial PCs
• Embedded Board Computers
• controller

This is a Mini ITX standard industrial motherboard with the following features: ● Supports Intel® 8th/9th generation Core™ LGA1151 processors ● DDR4 DRAM 2666MHz (up to 32GB) ● M.2 slot (M key) x1, M.2 slot (E key) x1 ● PCIe [x4] x1 ● Slim Thin Mini ITX model ● Supports 12V DC input ● USB 3.0 x4, USB 2.0 x5

• Industrial PCs
• Embedded Board Computers
• controller

This is a Mini ITX specification industrial motherboard with the following features: ● DDR3L 1333/1600/1867 MHz SODIMM x 2 slots (up to 8GB) ● Supports independent triple display: VGA x 1, HDMI x 1, DP x 1, LVDS/eDP x 1 ● Equipped with Realtek 8111H Gigabit Ethernet x 2 ports ● Supports COM x 6 ports (RS-232 x 5, RS-232/422/485 x 1) ● Compatible with 12V DC input ● Slim Thin Mini ITX model ● PCIe(1) x 1 slot, M.2 x 2 slots (E-key x 1, M-key x 1)

• Industrial PCs
• Embedded Board Computers
• controller

This is a Mini ITX standard industrial motherboard with the following features: ● Supports Intel® 8th/9th generation Core™/Pentium® LGA1151 socket ● Supports DDR4 DRAM 2666MHz (up to 32GB) ● M.2 slot (M key) x1 (supports SATA only), M.2 slot (E key) x1 supported ● Equipped with USB 3.1 x 4, USB 2.0 x 4 ● Includes Intel® PHY i219LM and Intel® 211AT Ethernet controller ● SATA 6.0 Gb/s x 2 ● PCIe [×16] x1 (Gen3) slot ● Compatible with ATX power supply

• Industrial PCs
• Embedded Board Computers
• controller

The industrial tablet PC has the following features: ● 10.1-inch WXGA (1280 x 800) TFT LCD display, 300 nits ● Equipped with Intel(R) Celeron(TM) N3350/Intel(R) Pentium(TM) N4200 1.1GHz dual-core processor ● DDR3L 4GB SDRAM ● eMMC 64GB onboard ● Capacitive multi-touch panel ● 2MP front camera and 8MP camera with flash ● IP65 compliant ● RS-232/422/485 COM ports + 10/100/1000 Base-T RJ45 ● USB 3.0 x 2 (USB Type-C x 1), USB 2.0 x 2 ● Supports up to 3 GNSS, GPS + Galileo ● Hot-swappable battery + built-in battery (up to 44W) ● Windows 10 IoT English version installed

• Industrial PCs

The industrial tablet PC is equipped with the following features: ● 10.1-inch WXGA (1280 x 800) TFT LCD display, 300 nits ● Intel(R) Celeron(TM) N3350 / Intel(R) Pentium(TM) N4200 1.1GHz dual-core processor ● DDR3L 4GB SDRAM ● eMMC 64GB onboard ● Capacitive multi-touch panel ● 2MP front camera and 8MP camera with flash ● IP54 compliant ● Hot-swappable battery + built-in battery (up to 44W) ● Windows 10 IoT Enterprise SAC installed

• Industrial PCs

The 2-port 10GbE LAN expansion card has the following features: ● Compliant with PCIe [x4] Gen. 2 ● Equipped with Intel(R) x550 controller, 10GbE Ethernet LAN with 2 ports ● Compatible with CAT-6/6a RJ45 cables ● Supports CAT-5/5e cables, compatible with 1000BASE-T and NBASE-T ● Supports 15.5 KB jumbo frames, NIC teaming, and IEEE 1588

• Expansion Boards
• Embedded Board Computers
• controller

【Supported Processor】8th/9th generation Intel(R) Core(TM) i7, i5, i3, Pentium(R) compatible LGA 1151 socket (maximum 65W TDP) 【Memory】DDR4 2666/2400 MHz SODIMM x 2 slots (maximum 32GB) 【Expansion Slots】PCIe 3.0 [x4] x 1, M.2 M key x 1, M.2 E key x 1 【Rear I/O】USB 3.1 x 4, DP x 2, Mic-in x 1, Line-out x 1, Gigabit LAN x 2, DC jack 【Storage】SATA 6.0 Gb/s x 4, M.2 M-key x 1 【Pin Header I/O】USB 2.0 x 3 (supports 6 USB), Audio x 1, RS-232/422/485 x 1, Digital I/O x 1, CMOS jumper x 1 【Input Power】DC 12V 【Operating Temperature】0°C ~ 60°C 【Supported OS】Windows 10 64-bit, Linux Fedora 64-bit

• Industrial PCs
• Embedded Board Computers
• controller

The industrial mPCIe standard USB dual-isolated CANbus 2.0B/J193 conversion adapter has the following features: ● Compliant with CANbus 2.0B and also supports 2.0A ● Supports baud rates of 100/125/250/500 (default)/800/1000K ● Supports CAN message authentication filtering ● Settings can be retained even after a hardware reboot ● Up to 6000 CAN messages per second (received data) ● Supports listen-only mode ● Jumper settings for enabling/disabling termination resistors ● Compliant with EN61000-4-5 2.5kV surge protection ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Equipped with three mounting holes for installation outside the mini card standard ● 30μ” golden finger"

• Expansion Boards

Industrial M.2 - RS-232/422/485 × 4 port conversion adapter with the following features: ● Compliant with PCIe 2.0 ● RS-232/422/485 configurable via software ● Maximum 1Mbps RS232, maximum 15Mbps RS422/485 serial data rate (16C550 compatible, 256-byte FIFOs) ● Equipped with DB9 pin connector ● Termination resistance can be enabled/disabled via DIP switch ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Operating temperature -40 ºC to 85 ºC ● −30μ” golden finger"

• Expansion Boards

Industrial mPCIe - Insulated RS-422×2 & RS-485×2 port conversion adapter with the following features: ● Compliant with PCI-Express specification Rev. 2.0 ● Maximum 10 Mbps serial data rate (16C550 compatible, 256-byte FIFOs) ● Port-PC isolation support, compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Switch-configurable termination resistors ● Wide temperature range support ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe-isolated RS485×4 port conversion adapter has the following features: ● Compliant with PCI-Express specification Rev. 2.0 ● Maximum 10 Mbps serial data rate (16C550 compatible, 256-byte FIFOs) ● Port-PC isolation support, compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Switch-configurable termination resistors ● Wide temperature range support ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232/422/485×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Soft switchable between RS-232/422/485 modes ● RS-232 supports a maximum serial data rate of 1 Mbps, while RS-422/485 supports up to 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● Usable in various systems due to conversion with daughterboard and cable + DB-9 connector board ● Jumper settings on the daughterboard allow selection of 5V/12V output ● ESD protection included ● Termination resistors included on the daughterboard ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Maximum serial data rate of 1Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● Supports CTS/RTS hardware control ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe to RS-232 x2 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS232 supports a maximum serial data rate of 1Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● Supports CTS/RTS hardware control ● 30μ” golden finger"

• Expansion Boards

The industrial mPCIe-RS-422/485×4 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS-422/485 mode can be set via a switch ● Supports 485HD (half-duplex) and 485FD (full-duplex) ● RS422/485 supports a maximum serial data rate of 15Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-422/485×2 port conversion adapter has the following features: ● Compliant with PCIe 2.0 ● RS-422/485 mode can be set via a switch ● Supports 485HD (half-duplex) and 485FD (full-duplex) ● RS422/485 supports a maximum serial data rate of 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with wide temperature support (-40 ºC to 85 ºC) ● DB9 connector is cable type ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial mPCIe-RS-232/422/485 conversion adapter has the following features: ● Compliant with PCIe 2.0 ● Software switchable between RS-232/422/485 modes ● RS232 supports a maximum serial data rate of 1 Mbps, and RS422/485 supports a maximum of 15 Mbps (16C550 compatible, 256-byte FIFOs) ● Designed for industrial use with a wide temperature range (-40 ºC to 85 ºC) ● Usable in various systems due to conversion with daughterboard and cable + DB-9 connector board ● Jumper settings on the daughterboard allow selection of 5V/12V output ● Termination resistors included on the daughterboard ● ESD protection included ● 30μ” golden finger

• Expansion Boards

The industrial PCIe-isolated PoE/PoE+ ×4 conversion adapter has the following features: ● Isolated GbE LAN ×4 ports ● Independent PSE channels ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEEE 802.3at (up to 25.5W @ 52V/PoE port) ● Supports DC 12~24V input with a 6-pin PCIe ATX connector ● Supports a maximum total power of 75W for 4 PoE ports (up to 25.5W per port) ● Compliant with EN61000-4-5 2kV surge protection ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT protection ● 30μ golden finger

• Expansion Boards

The industrial M.2 conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● DC jack type, compatible with DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial M.2 conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● 4-pin header type, compatible with DC12-24V input ● Compliant with IEEE 802.3af (maximum 15.4@48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe - PoE+ conversion adapter has the following features: ● Isolated Gigabit LAN ports x2 ● Two independent PSE channels ● Supports DC 19V~24V power input with 4-pin header type ● Compliant with IEEE 802.3at (maximum 25.5W @ 52V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to PoE conversion adapter has the following features: ● Isolated Gigabit LAN ports x2 ● Two independent PSE channels ● DC jack type supporting DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W @ 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to PoE conversion adapter has the following features: ● Isolated Gigabit LAN port ● Two independent PSE channels ● 4-pin header type, compatible with DC 12-24V input ● Compliant with IEEE 802.3af (up to 15.4W at 48V/PoE port) ● Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 1.7KV HiPOT protection ● Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Wide temperature model also available

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts mPCIe to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems due to conversion with daughterboard and cables ● Available in two models: mounting hole type for embedded applications and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is of horizontal type

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts from mPCIe to isolated Gigabit LAN x1 port ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable with various systems through conversion with daughter boards and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is horizontal type

• Expansion Boards

The industrial mPCIe to Gigabit LAN conversion adapter has the following features: ● Converts mPCIe to isolated Gigabit LAN with 2 ports ● Complies with EN61000-4-5 2kV surge protection ● Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2kV HiPOT ● Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV ● Usable in various systems as it converts with daughterboard and cables ● Available in two models: mounting hole type for embedded use and bracket type ● Wide temperature model available ● -30μ” golden finger ● Mainboard connection connector is of vertical type

• Expansion Boards