V-net AAEON List of Products and Services

This is an industrial 2-port optical bypass switch that switches nodes on a fiber optic network using the bypass function in case of a failure. It has the following features: ● Supports 100M/1G/10G optical bypass function with 2-port Duplex or 4-port Simplex optical connections ● Available in multi-mode or single-mode fiber optic models ● Low insertion loss ● Data transmission possible without throughput impact and without delay ● Switching time to bypass is less than 10ms ● Supports dual power input for redundancy, compatible with 12~48VDC input ● Equipped with relay output to warn of power failure ● Housing complies with IP30 ● Compatible with DIN rail/wall mount ● For more details, please download the datasheet.

• Routers, Switches, and Hubs

It is an industrial embedded fanless PC with the following features: ● Equipped with 4 Gigabit LAN ports ● 2 HDMI ports ● USB 3.0 compatible ports ● Aluminum casing, palm-sized ● Wide temperature operation range from -30°C to 70°C ● Compatible with VESA 75 and DIN mounting using separately sold VESA mount and DIN mount brackets

• Industrial PCs
• Embedded Board Computers
• controller

The 10.1-inch fanless touch panel PC has the following features: ● Equipped with a 10.1-inch WXGA (1280 x 800) TFT LCD display ● Powered by Intel(R) Pentium(R) N4200/Celeron(R) N3350 ● Supports 2-point multi-touch with capacitive touch technology ● Front bezel complies with IP65 standards ● Fanless design ● VESA75/panel mount compatible ● DC 9~30V input

• Touch Panel
• Industrial PCs
• Display

The 3.5-inch standard embedded CPU board features the following: ● Equipped with Intel(R) 7th generation U Core(TM) i7/i5/i3/Celeron(R) processors ● DDR4 1866/2133, 1 SODIMM slot ● DVI-I, DP, 18/24 bit dual-channel LVDS ● 2-channel audio ● SATA III x1, mSATA x1 (shared with half-size mini card, selectable in BIOS) ● 8-bit digital I/O, supports USB2.0 x2, USB3.0 x4 ● Supports COM x4 (RS-232 x1, RS-232/422/485 x3) ● 1 full-size mini card slot, SIM ● DC 9~36V input support ● Equipped with 4/5/8 wire resistive touch screen controller ● AAEON's proprietary expansion BIO connector available

• Industrial PCs
• Embedded Board Computers
• controller

The desktop network appliance is equipped with the following features: ● Intel(R) N3350 processor SoC ● 204-pin dual-channel DDR3L 1867MHz SODIMM ● 10/100/1000Base-TX Ethernet x 6 ports ● CFast socket x 1 ● Mini card slot x 2 (with 1 SIM socket and USB signals only) ● Easily accessible SIM cover ● TPM support ● RJ-45 console x 1, USB 3.0 x 2, HDMI.

• Other network tools
• Industrial PCs
• server

The medical fanless PC has the following features: ● Equipped with Intel(R) Bay Trail J1900 quad-core processor (2GHz) ● Multi-display support ● Fanless and easy to maintain ● Mini size

• Industrial PCs
• Embedded Board Computers
• controller

The 10.1-inch medical tablet PC has the following features: ● Equipped with Intel(R) Cherry Trail processor ● Slim and lightweight design for easy portability ● Long-lasting battery ● Standard USB Type A port for easy connection to other devices ● IP54 compliant, drop-resistant (supports drops from 3 feet) ● ORION client compatible ● VESA 75 compatible via mechanical metal adapter ● EN60601-1/UL60601-1 certified

• LCD display
• Display

This 19-inch medical-grade thin AIO PC, certified to medical standard EN60601, has the following features: ● Equipped with Intel(R) 6th generation Core(TM) i7/i5/i3 processors ● Intel(R) H110 chipset ● Supports DDR4 2133 SODIMM (up to 32GB) ● 19-inch SXGA LCD with LED backlight ● 5-wire resistive touch panel/capacitive multi-touch panel ● Gigabit LAN x 2, high-speed USB 3.0 x 1, RS-232 x 2 ● +12V DC input

• Industrial PCs
• Image Processing Equipment
• Embedded Board Computers

The PICO-ITX standard Rockchip equipped CPU board has the following features: ● Rockchip RK3288 ARM Cortex(TM)-A17 Quad-core 1.6 GHz ● Onboard DDR3L 2GB memory ● Onboard 16GB eMMC ● MicroSD slot (up to 64GB) ● Gigabit Ethernet x1 ● 18/24-bit dual-channel LVDS, eDP, HDMI support ● RS-232 x1, RS-232/422/485 x1 support ● USB 2.0 x3, USB OTG x1, mini PCIe x1 (for 3G/4G module)

• Industrial PCs
• Embedded Board Computers
• controller

The 3.5-inch standard embedded CPU board features the following: ● Equipped with Intel(R) Core(TM) i7/i5 processor SoC ● DDR4 1866/2133 SODIMM x 1 slot ● DVI, CRT/DP, 18/24-bit dual-channel LVDS ● 2-channel audio ● SATA III x 1 and mSATA compatible (shared with half-size mini card) ● 8-bit DIO compatible, USB2.0 x 2, USB3.0 x 4 compatible ● COM x 4 compatible (including 1 RS-232, 3 RS-232/422/485) ● Full-size mini card slot x 1 ● Wide range DC input compatible from 9 to 36V ● Equipped with 4/5/8-wire resistive touch screen controller ● AAEON original BIO connector for connection with daughter boards

• Industrial PCs
• Embedded Board Computers
• controller

The industrial fanless embedded PC has the following features: ● Equipped with Intel(R) Pentium(R) N4200 2.5GHz / Celeron(R) N3350 2.4GHz ● DDR3L 1866 SODIMM x 1 slot (up to 8GB) ● Total of 6 COM ports: RS-232/422/485 x 2 + RS-232 x 4 ● USB 3.0 x 4 ● Supports VGA + HDMI output ● 2.5-inch drive bay x 1, mSATA x 1 slot ● AAEON's Hi-Safe compliant ● DC 9~24V input compatible ● Wide temperature range of -20°C to 60°C ● AT/ATX switch, remote power ON/OFF switch

• Industrial PCs
• Embedded Board Computers
• controller

It is an industrial fanless ultra-compact PC with the following features: ● Equipped with 2 Gigabit LAN ports ● 1 x 2.5-inch HDD/SSD bay ● 1 x USB 3.0 port ● Supports 8-bit programmable digital input/output ● Compatible with 12-24V DC input

• Industrial PCs
• Embedded Board Computers
• controller

This industrial fanless ultra-compact PC has the following features: ● Equipped with 4 Gigabit LAN ports, making it an ideal small PC for network appliances ● 1 x 2.5-inch HDD/SSD bay ● Equipped with USB 3.0 ports ● CFast slot on the side for easy installation ● Operating temperature range of 30°C to 75°C

• Industrial PCs
• Embedded Board Computers
• controller

The 7-inch fanless touch panel PC has the following features: ● 7-inch WSVGA (1024 x 600) TFT LCD display ● Equipped with Intel N2807/J1900 processor ● Wide flat screen ● Capacitive 2-point multi-touch support ● 7H anti-scratch surface ● Aluminum chassis design ● Front bezel compliant with IP65 ● Fanless structure ● VESA 75/panel mount/stand compatible

• Industrial PCs
• Embedded Board Computers
• controller

The 10.1-inch fanless touch panel PC has the following features: ● Equipped with a 10.1-inch WXGA (1280x800) TFT LCD display ● Powered by Intel(R) Celeron(R) J1900/N2807 processor ● Aluminum chassis design ● Features 2-point multi-touch P-CAP ● Fanless structure ● Supports VESA75/panel mount/stand ● Front bezel is IP65 rated

• Industrial PCs
• Embedded Board Computers
• controller

The 3.5-inch industrial fanless CPU board has the following features: ● Equipped with Intel(R) Pentium(R) N4200 / Celeron(R) N3350 processors ● Features the latest Intel Apollo Lake ● DDR3L 1867 MHz SODIMM x 1 slot (up to 8GB) ● Equipped with VGA/LVDS/LVDS2 (HDMI is optional and shares circuits with LVDS2) ● 2-channel audio, SATA III x 1 port ● 8-bit digital I/O, USB 2.0 x 4, USB 3.0 x 2, COM x 4 support ● Supports 1 half-size mini card and 1 full-size mSATA ● Supports single DC 12V input

• Industrial PCs
• Embedded Board Computers
• controller

The industrial fanless touch panel PC has the following features: ● 15-inch XGA (1024 x 768) TFT LCD display ● Equipped with Intel(R) N2807/J1900 processor ● Capacitive (P-CAP) or resistive touch models available ● Aluminum chassis ● Front bezel complies with IP65 ● Fanless design ● Memory sold separately ● Optional panel mount kit available for purchase ● Easy I/O expansion with the separately sold AAEON OMNI I/O module

• Touch Panel
• Industrial PCs
• Display

The industrial fanless touch panel PC has the following features: ● 10.4-inch 800×600 resolution TFT LCD display ● Equipped with Intel(R) N2807/J1900 processor ● Capacitive (P-CAP) or resistive touch models available ● Aluminum chassis ● Front bezel complies with IP65 ● Fanless design ● Memory sold separately

• Touch Panel
• Industrial PCs
• Display

The industrial fanless touch panel PC has the following features: ● 12.1-inch XGA (1024 x 768) TFT LCD display ● Equipped with Intel(R) N2807/J1900 processor ● Capacitive (P-CAP) or resistive touch models available ● Aluminum chassis ● Front bezel complies with IP65 ● Fanless design ● Memory sold separately ● Optional panel mount kit available for separate purchase

• Touch Panel
• Industrial PCs
• Display

The Intel version CPU board of Raspberry Pi has the following features: ● I/O compatible and the same size as Raspberry Pi ● Fanless and high performance ● Equipped with a quad-core Intel CPU and graphics ● Support for development community site (www.up-community.org) ● Compatible with Debian-Ubilinux/Ubuntu/yoctoLinux ● Compatible with Windows 10 ● Achieves low cost with Intel-equipped products ● Ideal for drones, education, robotics, media centers, IoT, and home automation

• Industrial PCs
• Embedded Board Computers
• controller

This is a 3.5-inch industrial CPU board with the following features: ● Equipped with Intel(R) Atom E3845/E3825 processor ● 2G DDR3L memory on board ● CRT, 18/24-bit LVDS, HDMI (only for E3845 model) ● 2-channel audio ● SATA 3.0 Gb/s x 1 and mSTA slot x 1 (shared with mini card) ● Supports 8-bit digital I/O ● USB2.0 x 3, USB3.0 x 1 ● 2 mini card slots (1 full size, 1 half size) ● Supports 9~24V DC input

• Industrial PCs
• Embedded Board Computers
• controller

This is an industrial fanless PC with the following features: ● Palm-sized ultra-compact design (166 mm x 106.6 mm x 30 mm) ● Only 30 mm thick ● Equipped with 4 LAN ports and 2 HDMI ports ● Operating temperature range of -30°C to 65°C

• Industrial PCs
• Embedded Board Computers
• controller

This is an industrial touch panel PC with the following features: ● Fanless design ● Flat bezel type ● Available with resistive or capacitive touch panel types ● Can add necessary IO using optional OMNI modules (additional modules for COM, USB, LAN, CAN bus, etc. are available separately) ● Supports 9~30V DC input (AC adapter sold separately)

• Touch Panel
• Industrial PCs
• Display

This is an EPIC standard industrial CPU board with the following features: ● Onboard Intel(R) Atom(TM) E3845/Celeron(R) J1900/N2807 processor SoC ● DDR3L 1333Mhz SoDIMM x 1 (maximum: 4GB (N2807)/8GB (J1900/E3845)) ● LVDS 24-bit dual channel support ● Dual display configuration: VGA + LVDS, VGA + HDMI, HDMI + LVDS ● SATA 3.0Gb/s x 1, mSATA/minicard x 1 ● USB 3.0 x 1, USB 2.0 x 5, RS-232 x 4, RS-232/422/485 x 2 (COM2, COM3) ● 9-24VDC input support

• Industrial PCs
• Embedded Board Computers
• controller

This is an industrial CPU board compliant with the PICO-ITX standard, featuring the following characteristics: ● Onboard Intel(R) Atom(TM) E3825/E3845/Celeron(R) J1900/N2807 processors ● DDR3L 1066/1333 MHz SODIMM x 1 (up to 4GB (N2807/E3825)・8GB (J1900/E3845)) ● 18/24-bit LVDS, CRT port shared with DisplayPort ● SATA 3.0 Gb/s x 1 ● USB3.0 x 1, USB2.0 x 2 ● RJ45 Gigabit Ethernet x 1 ● RS-232 x 1, RS-232/422/485 x 1 ● mSATA/Mini-Card x 1, Mini-Card x 1 ● 4-bit digital I/O

• Industrial PCs
• Embedded Board Computers
• controller

This is a Mini ITX standard industrial motherboard with the following features: ● Equipped with Intel Baytrail-D/M/I processor (default is N2930) ● Supports DDR3L 1333/1066MHz single/dual channel memory (maximum 4GB/8GB) ● Compatible with ATAII (3Gb/s), Gigabit LAN, mPCIe, PCIe ● Supports RS232/422/485, RS232 ● USB 3.0×3, USB 2.0×5 ● Supports DVI-I, LVDS ● DC 9~36V input

• Embedded Board Computers
• Industrial PCs
• controller

This is a Mini ITX specification industrial motherboard with the following features: ● Equipped with Intel Bay Trail-D/M/I processors ● Supports DDR3L 1333/1066MHz single/dual channel memory, 4GB/8GB ● Compatible with ATAII (3Gb/s), Gigabit LAN, mPCIe, PCIe(1) ● Supports RS232/422/485 and RS232 ● USB 3.0, USB 2.0, VGA, HDMI, LVDS ● DC 9~24V wide range DC-in jack

• Embedded Board Computers
• Industrial PCs
• controller

This is a Mini ITX specification industrial motherboard with the following features: ● Equipped with Intel Bay Trail-M/D/I processors ● Supports DDR3L 1333/1066MHz single/dual (up to 4GB/8GB) memory ● Supports SATAII (3Gb/s) and 4 Gigabit LAN ports ● Supports mPCIe x1, mSATA x1, PCIe(1) x2, COM x2, USB 3.0 x1, and USB 2.0 x5

• Embedded Board Computers
• Industrial PCs
• controller

This is a Mini ITX standard industrial motherboard with the following features: ● Equipped with Intel Celeron J1900 (2.0 GHz) quad-core processor ● Supports DirectX 11 3D graphic acceleration ● Compatible with DDR3L 1333 ● Gigabit LAN x2 ● USB 3.0 x1, USB 2.0 x9, COM x12 ports ● Supports amplifier function (3W)

• Embedded Board Computers
• Industrial PCs
• controller

This is a Mini ITX standard industrial motherboard with the following features: ● Equipped with Intel Braswell N3160 processor ● DDR3L 1600MHz SO-DIMM x1 slot (up to 8GB) ● Supports independent triple display with DVI-D/HDMI/LVDS ● ATAIII (6Gb/s), full-size mSATA support ● RS232/422/485, RS232 COM support ● USB3.0 x4, USB1.1/2.0 x3 ● PCIe x1, full-size mPCIe x1

• Embedded Board Computers
• Industrial PCs
• controller

The 3.5-inch standard industrial CPU board has the following features: ● Equipped with Intel Bay Trail D/M/I processor ● Supports DDR3L 1333/1066MHz single-channel memory (up to 4GB) ● Compatible with ATAII (3Gb/s) devices ● Supports 24 bits dual-channel LVDS header ● Supports Realtek RT8111G Gigabit LAN x2

• Embedded Board Computers
• Industrial PCs
• controller

This is a 3.5-inch standard single-board computer with the following features: ● Equipped with Intel(R) Celeron(R) N2930/N2807 processor ● DDR3L 1066/1333MHz SODIMM x 1 (up to 8GB) (sold separately) ● Gigabit LAN x 2 ● CRT x 1 ● 18/24-bit dual-channel LVDS ● HDMI x 1 ● 2-channel HD audio ● SATA 3.0Gb/s x 1 ● CFast x 1 ● USB3.0 x 1 ● USB2.0 x 3 ● COM x 4 ● 8-bit digital I/O ● Mini card x 2 (including 1 full-size and 1 half-size) ● Single +12V power supply

• Industrial PCs
• Embedded Board Computers
• controller

The 3.5-inch standard industrial CPU board has the following features: ● Equipped with Intel(R) Bay Trail D J1900 2.0GHz quad-core processor ● Supports DDR3L 1333MHz single-channel 4GB memory ● Supports ATAII ×1 (3Gb/s) devices ● Intel(R) i211AT PCIe Gigabit LAN ×1 ● SIM card holder ×1 ● Full-size mPCIe ×2, full-size mPCIe (with mSATA) ×1 ● Watchdog timer supports 0~255 sec ● DC 12V terminal block

• Embedded Board Computers
• Industrial PCs
• controller

3.5-inch standard industrial CPU board ● Intel(R) Bay Trail series processor ● DDR3L 1333MHz single channel SO-DIMM support (up to 8GB) ● Serial ATA II (3Gb/s) device support ● 24-bits dual channel LVDS ×1, 4-lane eDP ×1 ● HDMI/DP/LVDS independent triple display support ● VGA support

• Embedded Board Computers
• Industrial PCs
• controller

The PICO-ITX standard industrial CPU board has the following features: ● Equipped with Intel(R) Bay Trail N2930 (Quad-core, 1.83G) ● Equipped with Intel(R) Bay Trail N2807 (Dual-core, 1.58G) ● Equipped with Intel(R) Bay Trail E3827 (Dual-core, 1.75G) ● Supports DDR3L 1333MHz single channel, 2GB/4GB memory ● Supports Serial ATAII (3Gb/s) devices ● Supports 24-bits dual channel LVDS header ● Supports HDMI output ● Supports Realtek RT8111G Gigabit LAN

• Embedded Board Computers
• Industrial PCs
• controller

The PICO-ITX standard industrial CPU board has the following features: ● Equipped with Intel(R) Braswell N3160 2.24GHz ● Supports DDR3L 1600MHz single channel 4GB memory ● SATAIII×1 (6Gb/s), M.2×1 ● Supports 24-bits dual channel LVDS ● DP1.1 output support (maximum resolution 2560×1600@60Hz) ● Supports Intel(R)i211AT GbE LAN

• Embedded Board Computers
• Industrial PCs
• controller

This industrial fanless compact PC is equipped with the following features: ● Intel(R) Braswell N3160 1.6GHz ● Supports 4GB DDR3L 1600MHz memory ● HDMI and DisplayPort compatible ● Intel i211AT Gigabit LAN, supports 2 RJ45 ports ● External RS232×1 (RJ45 Type), supports 2 Internal COM ports ● External USB3.0×4, supports 2 Internal USB1.1/2.0 ● 2.5" SATA×1, M.2×1 (M key-2242) ● DC 12V terminal block

• Industrial PCs
• Embedded Board Computers
• controller

The industrial fanless compact PC has the following features: ● Intel(R) Skylake U (i5-6200U / i5-6300U) ● 2 SO-DIMM DDR4 slots (up to 32GB) ● 1 x 2.5” SATA device ● 1 x mSATA SSD device (Mini PCIe) ● DP / HDMI support ● 1 half-size Mini PCIe, 1 full-size Mini PCIe (shared with mSATA) ● 4 x USB 2.0, 4 x USB 3.0 ● 2 x Intel Gigabit LAN ● 12V DC input jack

• Industrial PCs
• Embedded Board Computers
• controller

The 17-inch fanless touch panel PC is equipped with the following features: ● Intel(R) BayTrail M N2930 1.83GHz quad-core processor ● Supports DDR3L 4G/1333MHz memory ● Supports Intel(R) Gigabit LAN ● Supports 3 COM ports ● Supports 2.5” SATA HDD ● Supports 1 mSATA socket ● Supports 1 mini PCI-E socket ● 3 USB 2.0 ports, 1 USB 3.0 port ● IP65 certified ● VESA mount compatible (100mm x 100mm, 75mm x 75mm)

• Touch Panel
• Industrial PCs
• Display

This is a Mini ITX standard industrial motherboard with the following features: ● Equipped with Intel Xeon Processor D-1541 ● DDR4 RDIMM x1 (up to 128GB) / 4 socket UDIMM (up to 64GB) ● PCIe 3.0 (16) x1, M.2 PCIe 3.0 x4, M key x1 ● 10 Gigabit LAN x2, Gigabit LAN x2 ports, USB 3.0 x2, USB 2.0 x4 supported ● Super DOM x1, COM x1, TPM x1, GPIO x1, SMbus x1 ● DC 12V / ATX power input

• Industrial PCs
• Embedded Board Computers
• controller