シンテック Product Lineup

The "Mizohikki" is a plate cutting device that allows you to create a collection board tailored to your needs. By setting the height and pressure, you can easily engrave grooves on the surface with a light pull. The included magnetic substrate guide enables stable positioning. We also offer a variety of products including Ultra, Histo, Cryo, Trim, Jumbo, and Original Knives. Custom specifications are also available. Please contact us for inquiries. 【Features】 ■ Easy to operate ■ Breaks at a fixed size ■ Compatible with silicon (quartz, sapphire, etc.) ■ Allows you to create your own collection board ■ Comes with 2 alignment magnets *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a marking knife for distinguishing continuous sections. By marking near the sample, close-up photography becomes possible, allowing for high-precision imaging. Additionally, by following the markings, accurate alignment of the sample can be achieved. Furthermore, comparing the lengths of the markings assists in distinguishing the alignment. 【Features】 ■ For distinguishing continuous sections ■ Enables close-up photography for high-precision imaging ■ Assists in distinguishing alignment *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Grid Holding Plate" is a product that makes it easy to collect continuous ultra-thin sections on a grid. It allows for stress-free placement of the grid, reducing fatigue. The ergonomic groove angle makes it easy to pull out. Additionally, it can be used at your preferred height with an adjustment screw. 【Features】 ■ Easy collection of continuous ultra-thin sections on a grid ■ Using it eliminates worries about wrinkles with the "scooping method" ■ Designed specifically for SYM JUMBO and WT, providing high stability ■ The grid fits perfectly into the groove, allowing for secure section collection ■ The height of the plate can be adjusted as desired by rotating the screw *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SYM JUMBO WT" is a water-draining jumbo that has evolved further by adding an extra touch to the conventional "SYM JUMBO." Adjusting the installation angle of the collection plate is easy. You can adjust the guide position with grooves, allowing you to use the collection plate that fits your hand directly. Additionally, since you can adjust the water drainage speed yourself, you can easily obtain continuous sections without wrinkles. 【Features】 ■ Can be installed on existing ultramicrotomes ■ No need to prepare additional equipment ■ Easy and effortless collection of continuous ultra-thin sections ■ High cost-effectiveness ■ Intuitive operation for drainage adjustment *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SYM JUMBO" is a jumbo with stairs that allows you to set the plate at your preferred angle. With a deeper boat, the water volume increases, enhancing stability during retrieval. The bottom has grooves that securely catch the board. We have gathered feedback on the jumbo and refined it into a more user-friendly shape. 【Features】 ■ Stair-shaped instead of ramp-shaped ■ Height adjustment mechanism ■ Deep boat ■ Angle selection available ■ Achieves setup at your preferred height and angle *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a holder with functionality that supports universal design. With holders (grooves) on both sides, it allows the use of the hand that the user is accustomed to. Additionally, transitioning to one-handed operation makes it easier to collect samples. The clearance angle is 6°. The blade edge angles are available in 35° and 45°. 【Features】 ■ Functionality that supports universal design ■ Transitioning to one-handed operation makes sample collection easier *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SH Series" is a diamond anvil that boasts high machining quality in dimensional accuracy, surface accuracy, parallel accuracy, and cutting accuracy. It can remove impurities and distortions on the culet surface that can lead to breakage to the utmost limit. We have carefully selected transparent and low-fluorescence rough stones with minimal impurities. Additionally, we can create anvils in various shapes. Please feel free to consult us regarding materials, shapes, or anything else. 【Features】 ■ High quality ■ High precision ■ Proven track record of generating ultra-high pressure ■ Extreme removal of impurities and distortions on the culet surface that can lead to breakage *For more details, please refer to the PDF document or feel free to contact us.

• others

"SEED" is an educational material for science education developed in collaboration with professors from Okayama University of Science. By adjusting the pressure, it is possible to observe the growth and melting of crystals. There are various ways to use it, such as observing the shapes of crystals with different test solutions or attempting to create single crystals. For those interested, we also offer demonstrations on-site, so please feel free to reach out. 【Features】 ■ Anyone can easily experience 1 GPa ■ The device is easy to use in just 3 steps ■ Observation on a computer screen is possible via USB 2.0 ■ By adjusting the pressure, it is possible to observe the growth and melting of crystals ■ There are various ways to use it, such as observing the shapes of crystals with different test solutions or attempting to create single crystals *For more details, please refer to the PDF materials or feel free to contact us.

• Other physicochemical equipment

We would like to introduce the "Grinding Wheel Chuck" handled by Shintec. To use this product, loosen the two screws on the side, move the left and right plates, and set the grinding wheel. Tighten the two screws to secure the grinding wheel. There is no waiting time, and there are no running costs. Additionally, it has high concentricity and parallelism. 【Features】 ■ No waiting time ■ No running costs ■ High concentricity and parallelism ■ Set up completed in just 5 to 10 minutes *For more details, please refer to the PDF document or feel free to contact us.

• Grindstone

Introducing the "Angle Adjustment Function Bar Cutter" handled by Shintec. This product allows anyone, even those without expertise, to easily make adjustments. It fits at an optimal angle for cylinders of all sizes. Additionally, the flat contact surface is wider than that of current curved models, allowing for efficient removal of burrs. Furthermore, the amount of burr entrapment is significantly reduced. 【Features】 ■ Easy adjustment ■ Replaceable cutter part only ■ Reduces push and scratch marks ■ Frees you from the hassle of settings ■ Fits at an optimal angle for cylinders of all sizes *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The width of the tip can be less than 0.1mm. The thermal conductivity of single crystal diamond is over 1000 W/mK. Diamond has exceptional performance compared to other materials with high thermal conductivity. (For reference: Silver 420, Copper 398, Gold 320, Aluminum 236) It also possesses a high hardness that is essential for tools used repeatedly, with a Vickers hardness of over 8,000. (For reference: Ceramic (SiC) approximately 2,300, Carbide approximately 2,000)

• Other semiconductors
• Bonding Equipment
• PCB terminal blocks

We have received the business transfer from Sumitomo Electric and changed our name from "Suminife" to "Shimnife." However, we continue to uphold the quality and rigorous shipping inspections, manufacturing as the only domestic manufacturer. We do not offer regrinding or replacement sales of conventional products, but we keep prices low, featuring an affordable price range and high quality. In addition to the conventional series, we have also started selling the N grade, which uses diamond of gem quality and is available for replacement sales. If you have any feedback or requests regarding the knives, please do not hesitate to let us know.

• Contract Inspection