加藤理機製作所 Product Lineup

The "KR3H, 4H Series" is a multipurpose automatic temperature control device that can be used for roll surface temperature control, jacket-type heating of mixing systems, and heat retention control, utilizing a thermal medium oil circulation system. It has a proven track record mainly in temperature control for molding dies of metals and plastics, as well as temperature control for die-casting machine molds. 【Safety System】 - Equipped with calendar timer and leakage breaker - Alarm for dry running prevention device (when tank medium is insufficient) - Alarm for thermal relay for motor (during operation) - Alarm for overheating prevention thermostat (power cut method) - Alarm for pump motor reverse prevention (in case of reverse phase during power input) *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control

The "ANL Series" is a system suitable for heat treatment of molded products, featuring high-performance fans and a special indoor design that excels in temperature distribution accuracy. It has a convenient shelf-step design, allowing for simultaneous annealing of multiple types of different molded products. 【Lineup】 ■ANL-60 ■ANL-80 ■ANL-100 ■ANL-120 *For more details, please download the PDF or feel free to contact us.

• Drying Equipment

The "ANL-S Series" is a steam-type product heat treatment system that prevents water droplets from adhering to molded products. It employs a heated steam circulation method using a water tank for indoor humidification, maintaining humidity levels. Additionally, due to the use of heated steam, the water drainage and drying process after annealing is very quick. 【Lineup】 ■ANL-S-5 ■ANL-S-7 ■ANL-S-10 *For more details, please download the PDF or feel free to contact us.

• Drying Equipment

The "KRM-W, HW series" features a touch panel on the operation panel and has replaced the conventional heater relay with an SSC (solid-state relay). It is a machine dedicated to water (clean water medium). The "KRM-W" has a sealed tank that allows a large amount of cooling water to enter directly into the tank, and it can be used at a stable temperature ranging from 40 to 90°C (from low to medium temperature). The "KRM-HW" can be used at a stable temperature ranging from 40 to 120°C (from low to high temperature), similar to conventional control devices. 【Features】 ■ Safety System - Leakage breaker - Dry running prevention device (alarm for insufficient medium in the tank) - Overheating prevention thermostat - Thermal relay for motor (alarm for overload) - Pump motor reverse prevention (pressure switch for abnormal high pressure in the tank during reverse phase of power input) (alarm for HW series only) *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control

The "KR-2H Series" is a mold temperature control device that uses an SSC (solid-state relay) for the heater relay, allowing for high-precision temperature regulation. In the event of a malfunction or parts replacement, the process is simple. For example, when replacing the heater, it can be done without draining the medium (oil) from the tank, preventing any mess in the factory. 【Features (Safety System)】 ■ All models are equipped with a leakage breaker for safety. ■ A 99-hour timer function is incorporated to reduce preparation time for work after holidays, etc. ■ Safety devices include dry-run prevention (if the medium in the tank is insufficient), overheating prevention thermostat (power cutoff method - if the maximum operating temperature of the device is exceeded), and pump motor reverse rotation prevention (the device will not operate if the power is connected in reverse phase). In these cases, a buzzer and lamp on the panel will light up, allowing for easy identification of the alarm location. *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control

The "KHD-X Series" is a hopper dryer that utilizes a high-pressure blower to allow hot air to pass evenly through the hopper and lower separator, enabling rapid drying. It features an easy-to-use one-board panel. The PV-SV display makes it easy to set and enhances functionality, allowing for immediate understanding of the operating temperature. 【Features】 ■ In the event of an abnormality during operation, the trouble spot is indicated by a monitoring lamp, allowing for quick recovery of the malfunctioning area. ■ Designed specifically for easy cleaning, the small model has a hopper body that opens and closes with hinges. ■ The medium model features a horizontal sliding mechanism, making internal inspections simple and significantly reducing the time required for material changes or color changes. ■ The screens are made of SUS304 for all models. ■ Equipped with an exhaust cyclone, there is no concern about dust. *For more details, please download the PDF or feel free to contact us.

• Dehumidifier

The "KID Series" is a dehumidifying dryer that uses a heatless dryer and can supply -50°C low dew point dry air to the hopper using compressed air. The safety system is comprehensive, including a leakage circuit breaker, overheating prevention device (power cut method), and motor thermal relay. 【Features】 ■ By adopting a closed transport plus material stop valve, it prevents drying return due to secondary air during transport and ensures no material remains in the hose, maintaining more thorough performance. ■ Equipped with a direct power cut overheating prevention device, motor overload prevention thermal relay, a power-on timer of 99 hours and 50 minutes (countdown type), and trouble monitoring. *For more details, please download the PDF or feel free to contact us.

• Dehumidifier

The "HON-LR Series" is a honeycomb-type dehumidifying hot air dryer that uses a one-pass method, ensuring that dust and gases do not adhere to the honeycomb rotor. Due to its double hopper design, it achieves low heat dissipation and energy efficiency. Additionally, by adopting a closed transport system with a material stop valve, it prevents drying return caused by secondary air during transport and eliminates material residue inside the hose, allowing for more thorough performance maintenance. 【Features】 ■ High-precision temperature control is possible by adopting SSC (solid-state relay) in the heater control circuit. ■ Higher safety is ensured by using an overheating prevention device (power cut-off method). *For more details, please download the PDF or feel free to contact us.

• Dehumidifier

The "HON-R Series" is a honeycomb dehumidification unit that can be used as a dehumidifying dryer by connecting it to a standard box-type dryer or hopper dryer. It features a honeycomb adsorption rotor that supports a dew point temperature of -40°C, ensuring a stable supply of air with a consistent dew point. 【Features】 ■ With a one-pass system, dust and gases do not adhere to the honeycomb rotor. ■ Can be connected to your existing dryers and box-type dryers. *For more details, please download the PDF or feel free to contact us.

• Dehumidifier

The "KRM-X Series" is a versatile mold temperature control device that can be used at a maximum temperature of 150°C when using the dedicated heat transfer medium "New Thermo #KC100," and at a maximum temperature of 90°C when using water. It comes standard with a safety feature that includes upper and lower limit alarms for the medium temperature (ALARM1). Additionally, by installing a mold sensor (optional), it allows for mold temperature display and upper/lower limit alarms for mold temperature. Furthermore, a heater disconnection alarm (HB) can be easily added. 【Features】 ■ Improved operability with a touch panel ■ Equipped with functions for stable molding ■ Outstanding safety system *For more details, please request documentation or view the PDF data available for download.

• Other processing machines
• Other molds