Earth Power Product Lineup

The NPB-120, 240, and 360 series are ClasslPower units that are compatible with lead-acid batteries (sealed, non-sealed, Gel, AGM) and lithium-ion batteries (lithium iron, lithium manganese), featuring two-stage and three-stage charging control. Despite their compact size, they are equipped with a wide range of functions, including adjustable input voltage and charging voltage/current. As a result, they are used in many applications such as robots, automobiles, medical devices, industrial equipment, and embedded system power supplies. 【Features】 - Wide input voltage range: AC90V to AC264V - Wide operating temperature range: -30℃ to +70℃ - Various protection circuits included - Option: NPB mounting cover available (model: EP-NPB123) *Currently preparing to obtain PSE certification. For detailed product information, please visit our company website.

The NPB-450, 750, 1200, and 1700 are high-capacity battery chargers that can be finely tuned through program settings. The 450 and 750 Series are designed using an integrated MCU and patented automatic distance measurement battery technology, while the 1200 and 1700 Series feature patented automatic distance detection technology for lithium-ion batteries utilizing a Battery Management System (BMS). 【Features】 - Wide input voltage range: AC90V to AC264V - Thermal control DC fan for noise reduction - Selectable charging methods (2-stage charging, 3-stage charging) - Built-in CANbus protocol (for control, settings, and monitoring) - Adjustable charging voltage and current via VR - Operating status signals, battery monitoring signals, remote control, and temperature sensor circuit included - Wide operating temperature range: -30℃ to +70℃ - Various protection circuits included - Certifications: UL / DEKRA / CB / EAC / AS/NZS / CE / UKCA *Currently preparing to obtain PSE certification. The 1200 and 1700 are products not applicable for PSE. For detailed product information, please visit our company website.

The NPP series is a 2-in-1 designed device that allows the use of both battery charger mode and power supply mode in a single unit. It can be used not only as a battery charger but also as a constant voltage output power supply to drive general loads. The system is not complicated and is a product that can be adopted for many applications. 【Features】 - 2-in-1 design: selectable battery charger mode / power supply mode - Maximum efficiency of 94% - Wide input voltage range AC90V to AC264V - Noise reduction measures with thermal control DC fan - Selectable charging methods (2-stage charging, 3-stage charging) - Built-in CANbus protocol (for control, setting, and monitoring) - Adjustable charging voltage and current via VR - Operating status signal, battery monitoring signal, remote control, and temperature sensor circuit included - Wide operating temperature range: -30℃ to +70℃ - Various protection circuits included - Certifications: UL / DEKRA / CB / EAC / AS/NZS / CE / UKCA *Currently preparing to obtain PSE certification. Models 1200 and 1700 are not subject to PSE certification. For detailed product information, please visit our website.

The "GC Series" is a charger that employs a "two-stage charging" method for high efficiency and long battery life. The two-stage charging consists of an initial charge and a float charge. It is adopted as a built-in unit in chargers and is incorporated into portable power units and UPS systems. 【Features】 ■ Two-stage charging method ■ Wide input voltage: AC90–264V ■ Wide temperature range: -30℃ to +60℃ ■ W testing conducted in Taiwan and Japan ■ Primary and secondary side insulation design ■ Various protection features included *For more details, please refer to the PDF document or feel free to contact us.

The HEP Series is a battery charger that supports a wide input voltage range with a three-stage charging method. Despite being a "high-quality" charger with various features and characteristics, the HEP Series is designed with an aluminum case filled with thermally conductive silicone, making it "tough." It can withstand applications in environments where high temperatures, high humidity, dust, high vibration (10G), oil (including machine oil), steam, altitude, oil smoke, and corrosive gases are present, which is why it is widely adopted due to its toughness. It is equipped with a PFC power factor correction circuit. The output voltage and current can be adjusted via an internal potentiometer. 【Features】 ■ High efficiency of 93.5% to 95.5% ■ Equipped with PFC (Power Factor Correction) circuit ■ Output voltage and current adjustable via internal potentiometer ■ Aluminum housing with high heat dissipation effect ■ Suitable for lead-acid and lithium-ion batteries ■ Adopts stage charging *For more details, please refer to the PDF document or feel free to contact us.

The "RPB Series" is a compact battery charger capable of outputting 1600W with high efficiency and a maximum power density of 25W/inch³. By using communication protocols such as PMBus and CANBus, it can charge other types of batteries, including lithium-ion batteries. Additionally, the RPB-1600 is equipped with built-in protection circuit functions for safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with PFC (Power Factor Correction) circuit for power factor improvement - Forced cooling by built-in DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Can be connected in parallel for a maximum of 4800W (2+1) - Built-in OR-ing FET *For more details, please refer to the PDF documentation or feel free to contact us.

The "RCB Series" is a 19-inch rack-mounted 1U (41mm) battery charger with an output of 1,600W. By utilizing output programming functions, PMBus, and CANBus, it can charge other types of batteries such as lithium-ion batteries. Additionally, the RCB-1600 has built-in protection circuit functions, ensuring safe and secure usage. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with a PFC (Power Factor Correction) circuit for improved power factor - Forced cooling with an internal DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, and battery reverse connection protection - 19-inch rack-mounted 1U, capable of a redundant system up to 8,000W - Built-in OR-ing FET and hot-swap (hot-plug) support *For more details, please refer to the PDF document or feel free to contact us.

The "ENC Series" battery charger is a desktop type battery charger that adopts a three-stage charging method. It is suitable for lead-acid batteries (non-sealed, sealed, gel, AGM) and lithium-ion batteries (lithium iron phosphate, ternary lithium-ion, etc.), and the program settings can be adjusted according to the type of battery used. Additionally, it has built-in protection circuit functions, ensuring safe and secure usage. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Programmable charging method (optional item: SBP-001) - Remote ON/OFF control and built-in temperature sensor - Charging voltage can be set according to the type of battery - Over-voltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Maximum efficiency: 90.5% *For more details, please refer to the PDF document or feel free to contact us.

The DBU Series is a 3,000W class battery charger that can be used for a wide range of applications even with just one unit. However, by increasing the number of units as needed, it allows for an expansion of output, enabling a flexible configuration that matches the scale of the system. Additionally, it supports CC/CV charging, which allows for charging according to the battery's condition, effectively enhancing performance while also contributing to an extension of its lifespan.

The DBR Series supports parallel connection of multiple units, allowing for flexible expansion of the overall system output according to the required power. Additionally, it features an internal OR-ing FET configuration that minimizes the impact on the entire system even if a problem occurs in one of the units. With a slim 1U design compatible with 19-inch racks, it can be integrated into limited spaces, making it a suitable battery charger for system configuration.