Shindengen Mechatronics Co., Ltd. Product Lineup

The "Push-Pull Solenoid," a linear motion type manufactured and sold by Shin Denko Mechatronics, is designed to achieve maximum suction power in the smallest size and weight by covering the maximally housed coil section with a high-permeability metal. Additionally, by providing auxiliary magnetic poles on the plunger, it achieves a 20-50% increase in suction power compared to configurations without auxiliary magnetic poles, making it highly efficient. Furthermore, the Push-Pull Solenoid can be used as a pull type by utilizing the shaft on the plunger side, or as a push type by utilizing the shaft on the mounting screw side, allowing for versatile applications with a single unit. 【Features】 - The magnetic circuit is ingeniously designed, enabling a compact size with significant suction power. - A wide range of models is available, from a compact 11mm diameter to a large 87mm diameter. - Two types of stroke characteristics can be selected from flat or conical structures. - It can be used for either push or pull operations. *For more details, please refer to the PDF document or feel free to contact us.

This catalog features the solenoid "SS Series," which can be used for long strokes. We offer products such as "S75SS," which enables significantly longer stroke drive, as well as "S100SS" and "S125SS." [Contents] - Features and usage of the SS Series - Coil rating table - Stroke-thrust characteristics - Current-thrust characteristics - Appearance diagrams *For more details, please refer to the PDF document or feel free to contact us.

This technical document provided by Shin Denko Mechatronics offers a detailed explanation of the straight-type "open frame solenoid." [Contents] ■ Structure and Features ■ Stroke and Suction Force ■ Considerations for Use ■ General Characteristics ■ Selection Method ■ Ordering Information ■ Nameplate Display *For more details, please refer to the PDF document or feel free to contact us.

This technical document provided by Shin Denko Mechatronics offers a detailed explanation of the straight-type "Small Push/Pull Solenoid." The structure and operation are exactly the same as those of a push-pull solenoid, and it is widely used in electronic locks, magnetic memory peripherals, and more. 【Contents】 ■ Structure and Features ■ Stroke and Suction Force ■ Considerations for Use ■ General Characteristics ■ Selection Method ■ Ordering Information ■ Nameplate Display *For more details, please refer to the PDF document or feel free to contact us.

This technical document provided by Shin Denko Mechatronics offers a detailed explanation of tubular solenoids. [Contents] ■ Structure and Features ■ Stroke and Suction Force ■ Considerations for Use ■ General Characteristics ■ Selection Method ■ Ordering Information ■ Nameplate Information *For more details, please refer to the PDF document or feel free to contact us.

This technical document provided by Shin Denko Mechatronics offers a detailed explanation of self-holding solenoids. [Contents] - Structure and Features - Stroke, Suction, and Holding Force - Considerations for Use - General Characteristics - Selection Method - Ordering Information - Nameplate Information *For more details, please refer to the PDF document or feel free to contact us.

This technical document provided by Shin Denko Mechatronics offers a detailed explanation of push-pull solenoids. [Contents] ■ Structure and Features ■ Stroke and Pulling Force ■ Considerations for Use ■ General Characteristics ■ Selection Method ■ Ordering Information ■ Nameplate Display *For more details, please refer to the PDF document or feel free to contact us.

The linear type "Tubular Solenoid" manufactured and sold by Shin Denko Mechatronics is designed for long stroke applications and is a compact actuator that provides a strong suction force. When a DC voltage is applied to the coil, the plunger is instantly and strongly attracted in the direction of the arrow, allowing for push/pull operations. Additionally, it features a standard noise-reducing spacer, resulting in low operating noise. There are a total of 15 models available, combining push and pull types, offering a rich lineup. 【Features】 ■ Cylindrical solenoid with a metal case covering the coil section ■ Suitable for long strokes with high reliability ■ Compact yet capable of generating a strong suction force ■ Minimal leakage magnetic flux to the outside ■ Standard noise-reducing spacer for quiet operation *For more details, please refer to the PDF document or feel free to contact us.

The "Self-Holding Solenoid" of the straight type manufactured and sold by Shin Denko Mechatronics combines a high-performance permanent magnet with a conventional open-frame solenoid. It allows the plunger to be attracted by instant energization of the coil, and after attraction, it is held in place by the permanent magnet, eliminating the need for continuous power during this period, making it an energy-saving type of straight solenoid. This product is very effective when you want to extend battery life or reduce heat generation. 【Features】 - High-performance permanent magnets and innovative magnetic circuits provide strong attraction and holding force. - No power is required after attraction, eliminating concerns about coil temperature rise and saving energy. - Available in both one-direction and two-direction holding types, allowing selection based on application. *For more details, please refer to the PDF document or feel free to contact us.

The "Compact Push-Pull Solenoid" of the straight type manufactured and sold by Shin Denko Mechatronics is built with the same structure as the standard type push-pull solenoid, despite its small size. As a result, its operation is exactly the same as that of a push-pull solenoid. It is widely used in electronic locks, magnetic memory peripherals, and more. 【Features】 ■ The characteristics of conventional push-pull solenoids have been miniaturized while enhancing productivity. ■ It features an economical design that eliminates waste. ■ The mounting method is standardized to the tapped base section. *For more details, please refer to the PDF materials or feel free to contact us.

The "Open Frame Solenoid" of the straight type manufactured and sold by Shin Denko Mechatronics is an actuator designed to achieve maximum suction power with the smallest size and weight, utilizing high permeability materials and considering the winding to increase the coil occupancy rate. It has the simplest structure among our solenoids, with part of the coil exposed and a rectangular shape. 【Contents】 ■ It features a simple structure with an open coil design. ■ It is a very economical solenoid. ■ A wide variety of models are available, providing a broad selection. *For more details, please refer to the PDF document or feel free to contact us.

The push-pull solenoid of our manufacture and sale, which operates in a linear motion type, is designed to achieve maximum suction power with the smallest size and weight by covering the fully retracted coil section with a high permeability metal. Furthermore, by providing an auxiliary magnetic pole on the plunger, the suction power is increased by 20-50% compared to cases without an auxiliary magnetic pole, making it highly efficient. Additionally, the push-pull solenoid can be used as a pull type by utilizing the shaft on the plunger side, or as a push type by utilizing the shaft on the mounting screw side, allowing for versatile applications with a single unit. 【Features】 - The magnetic circuit is cleverly designed, enabling small size with significant suction power. - A wide range of models is available, from compact sizes with an outer diameter of 11mm to large sizes of 87mm. - Two types of stroke characteristics can be selected from flat or conical structures. - It can be used for either push or pull operations. *For more details, please refer to the PDF document or feel free to contact us.

The linear type "Tubular Solenoid" manufactured and sold by Shin Denko Mechatronics is designed for use with long strokes, and it is a compact actuator that provides a strong suction force despite its small size. When a DC voltage is applied to the coil, the plunger is instantly and strongly attracted in the direction of the arrow, allowing for push/pull operation. Additionally, it features a standard noise-reducing spacer, which results in low operating noise. There are a total of 15 models available, combining push and pull types for a rich lineup. 【Features】 - Cylindrical solenoid with a metal case covering the coil section - Suitable for long strokes with high reliability - Compact yet capable of generating a large suction force - Minimal leakage magnetic flux to the outside - Standard noise-reducing spacer for low operating noise *For more details, please refer to the PDF document or feel free to contact us.

Shindengen Mechatronics Co., Ltd. will be exhibiting at the "Techno Frontier 2026 Motor Technology Exhibition" held at Tokyo Big Sight. Shindengen solenoids can accommodate a wide range of applications with various types centered around push-pull solenoids and rotary solenoids. It is also possible to optimize thrust characteristics and operating strokes according to application requirements. Additionally, there are configurations that prioritize cost. Furthermore, we offer proportional solenoids with extremely high control characteristics and automotive-compatible solenoids that balance very high environmental resistance with low cost at a high level. We sincerely look forward to your visit. 【Exhibition Overview】 ■ Venue: Tokyo Big Sight ■ Dates: July 15 (Wednesday) to July 17 (Friday) 9:30 AM to 5:00 PM ■ Booth Number: 2-W32 ■ Address: 3-11-1 Ariake, Koto-ku, Tokyo 135-0063 ■ Nearest Stations: - Rinkai Line: Kokusai Tenjijo Station (about a 7-minute walk) - Yurikamome: Tokyo Big Sight Station (about a 3-minute walk) *Please feel free to contact us for more details.