浜松クオンタム Product Lineup

- By automatically rotating 10 types of LEDs with different wavelengths at intervals of up to 50 milliseconds, light emission can be achieved. - Compared to expensive Xe lamp light sources, a low price has been realized. - The LED light emission amount is also between 0.1% and 0.3% due to a feedback mechanism. - The output section can be connected to optical fibers (SMA, FC connectors), liquid light guides, and direct light. - A selection of several dozen types of LED wavelengths is available. - It can be used for surface inspection of electronic components, inspection of the mixing of chemicals and substances, and foreign matter inspection.

• Optical Experimental Parts

- By coupling with a liquid light guide to the microscope, fan vibrations are reduced and cooling has become easier, achieving a low price (around 200,000 yen). - A single driver can emit up to four different wavelengths. For one wavelength, the LED output ranges from 300mW to 1.5W (output depends on the wavelength). - The LEDs inside the driver can be easily replaced with other LEDs.

• Light source/lighting
• Optical microscope

This is a high-speed strobe LED light source with a width of less than 1μsec and a rise time of 0.1 to 0.2μsec. The output ranges from 1 to 3W, and several wavelengths are available. By purchasing the driver unit, you can use it with various interchangeable wavelengths. Cooling options include a fan-assisted air cooling type and a cost-effective, compact natural air cooling type.

• LED Module

The HQ501-PL Nano Pulse Driver can generate high-output pulses on the order of 10 nanoseconds at wavelengths from UV to 1050 nm by driving high-output (up to 3 W) LEDs. Other wavelengths (up to 1650 nm) are also possible.

• LED Module

This is a strobe LED light source that irradiates a rectangular area of approximately several cm × 10 cm. It emits short pulses of light up to 200 ns, allowing for the observation of extremely fast phenomena. The output is very high at 1.5 W/cm² (@10 cm) and 150 mW/cm² (@30 cm), making it suitable for short pulse phenomena as well. The wavelength is 655 nm, but other wavelengths are also possible. Additionally, by arranging the LED light sources side by side, it is possible to irradiate an area of several cm × 30 cm (when three units are arranged).

• Lamps and light emitting devices

We handle wavelength-switchable fiber output and ultra-stable LED light sources. The system includes an LED driver circuit, interchangeable LEDs ranging from ultraviolet (265nm) to infrared (1650nm), and the output section can be used with either fiber-type (SMA, FC) or direct type. We also offer an LED driver circuit for nanosecond pulses and strobe LED light sources. It can be controlled externally via PC/SPI communication, and direct control is possible through a volume control. Emission can be triggered by TTL input from the outside, and strobe emission can be observed through TTL output. 【Features】 ■ Ultra-stable (below 0.3-1%) / Current stabilization ■ SMA, FC fiber coupling ■ Lens output, strobe LED light source ■ LED emission with pulse width in sub-microseconds ■ PC/TTL pulse control *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• Chip type LED