多田プラスチック工業 List of Products and Services

Our insulated boxes have excellent cleanability and can be used repeatedly over a long period, leading to a reduction in waste due to box wear. By combining the high insulation performance of rigid polyurethane insulated boxes with refrigerants, temperature-controlled transport can be achieved without using cool delivery services. They possess significantly higher cooling performance than typical polystyrene boxes, requiring only half the number of refrigerants, which in turn reduces the power consumption of the refrigeration units for the refrigerants by half. 【Features】 ■ Excellent cleanability and suitable for long-term repeated use ■ Contributes to waste reduction due to box wear ■ Enables temperature-controlled transport without using cool delivery services ■ Reduces power consumption of refrigeration units for refrigerants by half *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Our company is engaged in the development of small DC diaphragm pumps (micro pumps) for gas (pressurized and suction) and chemical-resistant rubber for liquid applications. In the field of office automation equipment, we are developing rubber that improves durability with ink. Additionally, for analytical devices used in medical equipment, we are developing chemical-resistant rubber for reagents and cleaning agents. Our product features self-priming capability and does not require priming water. It has the characteristics of high pressure and low noise. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Usable for both gas and liquid ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The small DC centrifugal pump (micro pump) with a magnetic coupling system can be operated from a distance using magnetic power, allowing for the use of high-temperature water. It is a pump that utilizes centrifugal force. It adopts a method where the impeller in the water passage is rotated by the power of magnets. Since the water passage and the motor are separated, there is no need for a shaft seal, eliminating concerns about liquid leakage. Additionally, we offer a separable type that does not require drilling holes in the tank and is easy to maintain. 【Features】 ■ Operable from a distance using magnetic power ■ Can use high-temperature water, applying centrifugal force ■ Adopts a method where the impeller in the water passage is rotated by magnets ■ No need for a shaft seal, eliminating concerns about liquid leakage ■ Easy-to-maintain separable type also available *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The small DC centrifugal pump (micro pump) for liquids complies with the Food Sanitation Act. By optimizing the casing structure, we have achieved a compact, lightweight, and low-cost design. Utilizing a magnetic coupling method, this product eliminates the shaft component, ensuring a consistently clean discharge. 【Features】 ■ Complies with the Food Sanitation Act ■ Achieves compactness, lightweight, and low cost through optimized casing structure ■ Adopts a magnetic coupling method using magnetic force ■ Maintains a consistently clean discharge by eliminating the shaft component *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a compact DC diaphragm pump (micro pump) capable of gas-liquid mixed operation and spraying various liquids. It can be widely used for gas and liquid applications. It features a compact size, high vacuum, high pressure, and low noise. Rubber parts are primarily made of EPDM. 【Features】 ■ High vacuum, high pressure ■ Low noise, low cost ■ Widely usable for gas and liquid applications ■ Compact size ■ Brushed motor: DC 12V, 24V ■ Brushless motor: DC 12V, 24V ■ Rubber parts are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a small DC diaphragm pump (micro pump) capable of gas-liquid mixed operation and spraying various liquids. It can be widely used for gas and liquid applications. It features a compact size, high vacuum, high pressure, and low noise. Rubber parts are mainly available in EPDM. 【Features】 ■ High vacuum, high pressure ■ Low noise, low cost ■ Widely applicable for gas and liquid uses ■ Compact size ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a small DC centrifugal pump (micro pump) for liquids. By optimizing the casing structure, we have achieved a compact, lightweight, and low-cost design. It boasts a long lifespan and tough specifications, easily exceeding a total durability time of 250 hours. We have prepared HQ characteristic diagrams, so please contact us if you are interested. 【Features】 - Achieves compactness, lightweight, and low cost through optimized casing structure - Adopts a magnetic coupling method utilizing magnetic force - Maintains consistently clean discharge by eliminating the shaft component - Long lifespan and tough specifications, easily exceeding a total durability time of 250 hours *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce a lightweight partition (aluminum frame) weighing approximately 7kg, which can be washed with water. As a measure against virus droplets, it can be sprayed with water and thoroughly washed. The surface is made of resin board, and the frame is aluminum. The size is 750mm × 1800mm × 24mm (maximum size), and the color of the partition is milky white. For heights exceeding 1800mm and other colors, separate consultations are available. 【Features】 ■ Made of rigid polyurethane, lightweight ■ Made of PP, can be wiped clean when dirty or wet ■ Can be kept clean by wiping with a disinfectant spray ■ The color of the partition is milky white *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce a partition (aluminum frame) that can be washed with water and is suitable for infection control measures. As a countermeasure against viral droplets, it can be sprayed with water and thoroughly washed. The surface is made of resin board, and the frame is made of aluminum. The size is 750mm × 1800mm × 24mm (maximum size), and the partition color is milky white. For heights exceeding 1800mm and other colors, separate consultations are available. 【Features】 ■ Made of rigid polyurethane, lightweight ■ Made of PP, can be wiped clean when dirty or wet ■ Can be kept clean by wiping with a disinfectant spray ■ Partition color is milky white *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce a washable partition made of rigid urethane (aluminum frame). As a measure against virus droplets, it can be washed with water. The surface is made of resin board, and the frame is made of aluminum. The size is 750mm x 1800mm x 24mm (maximum size), and the partition color is milky white. For heights exceeding 1800mm and other colors, separate consultations are available. 【Features】 ■ Made of rigid polyurethane, lightweight ■ Made of PP, can be wiped clean when dirt or moisture adheres ■ Can be kept clean by wiping with a disinfectant spray ■ Partition color is milky white *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

This product is a partition (aluminum frame) that can be wiped down with a disinfectant spray. As a measure against viral droplets, it can be washed with water. The surface is made of resin board, and the frame is made of aluminum. The size is 750mm × 1800mm × 24mm (maximum size), and the partition color is milky white. If the height exceeds 1800mm or if other colors are desired, please consult separately. 【Features】 ■ Made of rigid polyurethane, lightweight ■ Made of PP, can be wiped clean when dirty or wet ■ Can be wiped down with a disinfectant spray to maintain cleanliness ■ Partition color is milky white *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Our small DC pumps (micro pumps) have a delivery record of 45 million units. The small DC diaphragm pumps, which are high vacuum, high pressure, low noise, and low cost, have a delivery record of 10 million units. The small DC centrifugal pumps, featuring a highly reliable sealing mechanism and excellent durability, have a delivery record of 35 million units with outstanding cost performance. These products are suitable for industries such as automotive (mass production), office automation equipment, and medical devices. 【Features】 <Small DC Pumps> ■ Delivery record of 45 million units ■ Micro pumps ■ Low cost ■ Compact size ■ Suitable for gases and liquids *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Our precision molding (injection molding) is supported by essential equipment for quality improvement, including precision molding machines, mold temperature management, and sensors. We have established a temperature and humidity-controlled environment system aimed at expanding precision molding, creating a clean space to prevent foreign matter adhesion. The factory is IoT-enabled, and injection molding is managed via tablets. With the tablets, you can check the development status in real-time from anywhere as long as there is an internet connection. [Features] - Temperature and humidity-controlled environment system for expanding precision molding - Clean space to prevent foreign matter adhesion - Injection molding machines: 50t to 230t, dimensional tolerance: 0.005mm - IoT-enabled factory, tablet management for injection molding *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Injection Molding Machine

We would like to introduce our injection-molded products for air conditioning outdoor units. The materials used are resin, engineering plastics, and general-purpose plastics. The precision ranges from 0.1mm to 1/100mm, making it suitable for the low-voltage and home appliance industries. Our company turns ideas into "shapes" through technology. Please feel free to contact us when you need assistance. 【Specifications】 ■ Materials: Resin, engineering plastics, general-purpose plastics ■ Lot size: 1,000 to 100,000 pieces ■ Precision: 0.1mm to 1/100mm *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

We propose a COOL delivery box that does not require a large investment in molds and can maintain a temperature below 30°C for 10 hours. The size can be developed freely. Specifications such as the thickness of the polyurethane can be easily changed to match the required insulation performance. Additionally, the cooling performance is characterized by a long duration of maintaining a temperature below 30°C inside the delivery box under direct sunlight. 【Features】 ■ No large investment in molds required ■ Size can be developed freely ■ Easy to change specifications such as the thickness of the polyurethane to match the required insulation performance ■ Long duration of maintaining a temperature below 30°C inside the delivery box under direct sunlight *For more details, please refer to the PDF document or feel free to contact us.

• container

Introducing the "Cooling Tank for Beverage Dispensers." By coating a resin tank with high-insulation polyurethane, we utilize the self-adhesive properties of polyurethane. There are no gaps between the resin tank and the polyurethane, which minimizes the risk of peeling and condensation, thus maintaining performance. The insulation material used is a high-performance polyurethane (cyclopentane material) that has approximately 30% better insulation properties compared to standard expanded PS (0.034W/mk). 【Features】 ■ Compatible with blow-molded products and rigid foam polyurethane combinations ■ No gaps between the resin tank and polyurethane, reducing the risk of peeling and condensation, which helps maintain performance ■ Utilizes high-performance polyurethane (cyclopentane material) with excellent insulation properties ■ Made from materials with a zero ozone depletion potential and extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• tank
• Beverage Production Equipment

The "VIP Insulation Board" has been adopted for cargo COOL containers. This technology places vacuum insulation material at the center of high-insulation polyurethane. By enhancing the insulation properties of the entire wall, it is distributed as an "eco container." It improves the space utilization rate of insulated transport containers and has the benefit of reducing the power required to cool the container. 【Features】 ■ High-insulation polyurethane coated with vacuum insulation material ■ Industry-leading insulation performance ■ Protection of fragile vacuum insulation material ■ Utilizes the self-adhesive properties of polyurethane, eliminating the risk of peeling and gaps between the vacuum insulation material and polyurethane, making it less likely to degrade in performance. *For more details, please refer to the PDF document or feel free to contact us.

• container

In our packaging sector, we can handle disposable molded products up to assembly. We perform consistent operations in a clean room (Class 10000). We are committed to delivering high-quality products to everyone, ensuring safety and including traceability. 【Features】 ■ Injection Molding (Constant Temperature and Humidity Clean Booth) - Measurement and Visual Inspection (100% Inspection*) ■ After Finishing Assembly - Sampling Inspection for Bridges, Scratches, etc. - Torque Management (Hinges and Caps) *Visual inspection is automated. *For more details, please refer to the PDF document or feel free to contact us.

• Clean Booth

Our company conducts the assembly of small DC pumps (micro pumps) from the unit parts to the finished products in-house. We have established a production line that efficiently integrates the design of the production line and assembly techniques by both automated machines and humans, aiming to improve productivity while ensuring stable quality and high production capacity. Additionally, we can accommodate assembly lines (approximately 600m2) at Class 10000 and Class 100000 levels, depending on the quality requirements. 【Features】 ■ Clean room for small DC pumps (micro pumps) ■ In-house assembly from unit parts to finished products ■ Efficient integration of production line design and assembly techniques by automated machines and humans ■ Production line that ensures stable quality and high production capacity ■ Capability to accommodate assembly lines at Class 10000 and Class 100000 levels (approximately 600m2) *For more details, please refer to the PDF document or feel free to contact us.

• Clean Booth

There are two types of injection molding machines: the "vertical type," which opens and closes the mold in the vertical direction, and the "horizontal type," which opens and closes the mold in the horizontal direction. The mold structure is almost the same. The main difference lies in the space required for the installation of the injection molding machine. The vertical injection molding machine does not take up much width but requires height, so it can only be installed in places with high ceilings. The horizontal injection molding machine can be installed even in places with low ceilings. Previously, vertical machines were the mainstream, but recently, due to space considerations, there is a trend towards horizontal molding machines becoming the mainstream. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other Auto Parts
• Other contract services

We have introduced tablets and implemented DX (digital transformation) in our factory. We have digitized paper daily reports and placed them on each piece of equipment. Real-time performance can be monitored, and progress can be checked on a web interface. Input data is automatically reflected in the production plan for injection molding machines and is output in a Gantt chart. Please feel free to contact us if you have any inquiries. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Other contract services

We conducted a comparative experiment on the water absorption properties of rigid polyurethane. Fiber-based insulation materials (glass wool) have high vapor permeability and moisture retention, and they absorb water and sink when placed in water. The intrusion of water into insulation materials can lead to a significant decrease in insulation performance, as well as the growth of mold and mites, and can cause problems due to the weight of the moisture leading to collapse. Please feel free to contact us if you have any inquiries. *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Other contract services

Rigid urethane (cyclopentane) is resistant to most substances except for strong acids and some solvents, and it has excellent chemical resistance. Please feel free to contact us when you need assistance. 【Features】 ■Chemical Resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Other contract services

"Rigid polyurethane" has the excellent characteristic of self-adhesion. It is possible to create a strong adhesive insulation layer directly on the surface of objects such as metal, plywood, and concrete without using adhesives, by foaming directly. By utilizing this feature, it is possible to achieve integral molding and obtain products with excellent appearance. 【Specifications】 ■ Material: Resin, polyurethane, thermosetting resin ■ Lot: 1,000 to 10,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Composite Materials

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with thermal conductivity increasing in the order of "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mk (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mk) *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Composite Materials

The units of pressure according to the new measurement law include Pa (Pascal), N/m² (Newton per square meter), and bar as SI units, while Torr (Torr) is recognized as a non-SI unit for pressure within the body, and mmHg (millimeters of mercury) is recognized for blood pressure. There are two ways to express vacuum pressure; in the vacuum industry, absolute pressure is used, while in other industries, gauge pressure is more commonly used. Therefore, when looking at documents or catalogs, it is necessary to check which method is used to express pressure. 【Features of Small DC Diaphragm Pumps (Micro Pumps)】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Brushed motor: DC 3V, 12V, 24V ■ Brushless motor: DC 12V, 24V ■ Rubber parts are mainly available in EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Other pumps

At Tada Plastic Industry, we are engaged in "thinning of rigid urethane molding and resin substitution for injection molded metal parts." The resin substitution of metal components offers environmental benefits such as water resistance, insulation, chemical resistance, and the consideration of finite metal resources, while also contributing to the lightweighting of automobiles, which in turn extends driving range and reduces CO2 emissions. The market for metal substitution is growing at nearly 10% each year, and in major global automotive markets, regulations on CO2 emissions require an average weight reduction of about 200 kg by 2025. **Benefits of Metal Substitution (Resinization)** - Weight reduction - Cost reduction - Increased design flexibility - CO2 reduction *For more details, please refer to the PDF materials or feel free to contact us.*

• Other Auto Parts
• Injection Molding Machine

We provide lightweight, composite integrated products utilizing urethane foam technology to meet the needs for lightweight, insulation, soundproofing, and vibration damping. We offer proposals for improving vibration and soundproofing performance in light vehicles, as well as product suggestions for the caregiving and medical fields through lightweight and composite integration. Please feel free to contact us when you need assistance. 【Overview】 ■ Proposals for improving vibration and soundproofing performance in light vehicles ■ Proposals for high insulation housing concepts centered around bathrooms, bathtubs, and toilets ■ Product suggestions for the caregiving and medical fields through lightweight and composite integration ■ Product proposals for temperature setting flexibility in temperature-controlled transport and storage management in advanced medical care, as well as extending insulation and cooling times *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Other contract services

Injection molding is a process in which heated and melted material is injected into a mold, and then cooled and solidified to create molded products. It is suitable for mass production of products with complex shapes and constitutes a major field of molding processing. The injection molding process can be broadly divided into six steps: clamping → injection → holding pressure → cooling → mold opening → product removal. This cycle can be repeated to continuously produce products. 【Injection Molding Process】 (1) Clamping (2) Injection (3) Holding Pressure (4) Cooling (5) Mold Opening (6) Product Removal *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Injection Molding Machine

By working on products in various fields such as home appliances, electronic devices, medical equipment, and automobiles, we have developed our unique design technology. Leveraging these experiences, we aim to shorten the lead time for mold design by considering material properties, shapes, optimal gate positions, and molding conditions in advance. Please feel free to contact us when you need our services. 【Specifications】 ■Materials: Resin, engineering plastics, general-purpose plastics *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Mold Design
• Other molds

Our company leverages its experience to design and manufacture line jigs and other arrangements in-house. We aim for speedy shipping through in-house assembly line production, designing assembly lines according to product specifications and production volumes. We create everything necessary for assembly work, from jigs to workbenches and shelves, in-house every time a new model is introduced. This system and technology significantly shorten the setup period, leading to faster shipping. Additionally, we can quickly respond to sudden specification changes and additional production needs. 【Achievements in Finished Product Assembly】 ■ Humidifiers (No Compressor) ■ Ion Generators *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Assembly Machine
• Other assembly machines

To customers who are struggling with the production locations or production facilities of their own brand products, we will respond to your request to minimize or eliminate capital investment for production, thereby reducing financial burdens to a minimum. Our company leverages its experience in manufacturing various products, primarily focusing on electrical appliances, to meet your needs. Please feel free to contact us. 【Assembly Achievements】 ■ Air Purifiers ■ Humidifiers (Non-compressor) ■ Ion Generators *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Assembly Machine
• Other assembly machines

Our company collaborates with material manufacturers to develop materials that meet the required specifications. By researching and developing materials that are not yet available in the market, we aim to respond to our customers' needs in various aspects such as improved durability, weight reduction, and environmental considerations. Please feel free to contact us when you need assistance. 【Specifications】 ■Materials: Resin, super engineering plastics, engineering plastics *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Composite Materials

Our company conducts assembly from unit parts to finished products in-house. By designing production lines aimed at improving productivity and efficiently integrating assembly techniques using both automated machines and human labor, we have established production lines that achieve stable quality and high production capacity. Additionally, depending on the quality level, we can also design assembly lines within clean rooms. 【Specifications】 ■ Material: Assembled products ■ Lot: 1,000 to 10,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Assembly Machine
• Other assembly machines

Tada Plastic Industry's urethane molding offers the proposal of composite integral molding with dissimilar materials utilizing self-adhesive properties. Although we are a molding manufacturer, by collaborating with material manufacturers, we can select materials and achieve urethane composite integral molding combined with metals such as aluminum and iron, as well as plastics, which enables labor reduction and the proposal of different added values. Please feel free to contact us when you need our services. 【Specifications】 ■Materials: Iron, Aluminum, Urethane ■Lot: 100 to 1,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Injection Molding Machine

We will introduce the initiatives undertaken by Tada Plastic Industry to improve the productivity of rigid polyurethane foam molding. By utilizing the self-adhesive characteristics in the process of rigid polyurethane foam molding, it is possible to achieve composite integral molding (adhesion) with different materials, thereby eliminating the need for a separate adhesion process and reducing labor hours. 【Specifications】 ■ Materials: Steel, Aluminum, Polyurethane ■ Lot Size: 100 to 1,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Injection Molding Machine

Generally, the annealing treatment of plastics is primarily aimed at relieving distortion. Many plastics are cooled while being pressed into molds under high pressure, which can lead to the occurrence of distortion, also known as residual stress. For precision parts where dimensions are critical, reducing this residual stress helps prevent warping and deformation. Additionally, in products that undergo processes involving solvents, such as painting, printing, or adhesion, preventing cracks from areas where residual stress remains is important. To eliminate this residual stress, the material is placed in an electric furnace or hot air dryer and heated at a constant temperature for a specific period, after which the temperature is gradually lowered to room temperature. This process is commonly referred to as "annealing treatment." *For more details, please refer to the PDF document or feel free to contact us.*

• Other Auto Parts
• Annealing furnace
• Injection Molding Machine

The assembly of small DC pumps has been equipped with an air shower room due to the establishment of a clean room. Class 10000 and Class 100000. Injection molding, urethane molding, micro pumps, precision rubber molding, etc. Our company turns ideas into "forms" with technology. Please feel free to contact us when you need assistance. 【Specifications】 ■Materials: Resin, rubber, assembled products *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Clean Booth
• Air Shower

Tada Plastic Industry has facilities for maintaining a constant temperature and humidity environment aimed at precision molding expansion. The temperature control standards are 25°C ± 5°C and humidity 40% ± 10%. We create a clean space to prevent foreign matter adhesion. 【Specifications】 ■ Materials: Resin, super engineering plastics, engineering plastics ■ Lot: 1,000 to 100,000 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Clean Booth
• Injection Molding Machine

At Tada Plastic Industry, we perform injection molding in a clean booth. We have temperature and humidity-controlled environment equipment aimed at precision molding, creating a clean space to prevent foreign matter adhesion. The factory is equipped with IoT technology, and injection molding is managed via tablets, allowing real-time monitoring of development status from anywhere with an internet connection. 【Features】 ■ Precision molding with temperature and humidity-controlled environment equipment ・Injection molding machines from 50t to 230t ・Dimensional tolerance of ±0.005mm ■ IoT implementation in the factory, managed via tablets ■ Mold temperature management supported by equipment including sensors *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Clean Booth
• Injection Molding Machine

Tada Plastic Industry has a clean booth (temperature and humidity controlled environment) for medical injection molding. The injection molding machines range from 50t to 230t, with a dimensional tolerance of ±0.005mm. We create a clean space to prevent foreign matter adhesion. Additionally, the factory is IoT-enabled, and injection molding is managed via tablets, allowing real-time monitoring of development status from anywhere with an internet connection. 【Features】 ■ Precision molding in a temperature and humidity controlled environment ・Injection molding machines from 50t to 230t ・Dimensional tolerance of ±0.005mm ■ IoT-enabled factory with tablet management for injection molding ■ Mold temperature management and equipment including sensors *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Injection Molding Machine
• Clean Booth

At Tada Plastic Industry, we accommodate injection molding (up to 230t) with management focused on hygiene and other aspects. In addition to molding in a clean environment, part of the assembly is conducted in a clean room class 10000, and we carry out the entire process up to packaging consistently. We pursue the enhancement of quality through temperature and humidity control. In recent years, as the demand for clean molded products has increased, we have been able to meet a wide range of needs in packaging, food, and medical fields. If you have concerns about cleaning molded products or preventing foreign matter contamination, please feel free to consult us. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts
• Injection Molding Machine
• Clean Booth

Our injection molding division is equipped with molding machines ranging from 20t to 850t, and we handle products such as automotive parts, electronic devices, and medical equipment. We are actively engaged not only in equipment but also in the development of highly original molding technologies, utilizing our unique production management system to meet customer demands for delivery times, costs, required quality, and shortened lead times. Additionally, we are focusing on consistent surface treatment processing and decorative technology, as well as welding technology from injection molding. 【Main Injection Molding Technologies】 ■ Gas-assisted molding (AGI/GIM molding method) ■ Injection compression molding ■ Partial compression molding ■ Thin-walled molding ■ Automatic insert molding ■ Plastic magnet molding *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Other Auto Parts

At Tada Plastic Industry, we developed a camera lens cleaning unit for railway vehicles, which includes the design of a small DC pump (micro pump mechanism and structural design), as well as the molding and assembly of the housing. The small DC pump (micro pump) for the back monitor components of the ADAS driving support and security driving assistance system was proposed from the mechanism and structural design and produced at our factory. Some of the resin molded products, including the molding of the housing, were produced at our factory. 【Features】 ■ High flow rate, high pressure, and suitable unit design ■ Achieves cleaning power through high flow rate and high pressure ■ By designing the mechanism and structure within the unit, further noise reduction and vibration reduction are achieved *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Other Auto Parts

At Tada Plastic Industry, we propose cleaning units for AD/ADAS automotive parts. We perform the molding and assembly of small DC pumps (micro pump mechanisms and structural design) and housings. The small DC pumps (micro pumps) for ADAS driving support and security driving assistance systems are proposed from the mechanism and structural design and produced at our factory. We achieve cleaning power through high flow rates and high pressure. 【Features】 ■ High flow rate, high pressure, and suitable unit design ■ Achieves cleaning power through high flow rates and high pressure ■ Further reduces noise and vibration by designing the mechanism and structure within the unit *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Other Auto Parts