多田プラスチック工業 List of Products and Services

Our company offers "vacuum insulation material encapsulated panels" that suppress temperature changes during transportation due to their high insulation structure. By utilizing this product, it is possible to transport some cargo that previously required reefer container transport using dry containers. This shift to mass transportation via rail and shipping contributes to reducing CO2 emissions and lowering transportation costs. 【Benefits of Modal Shift】 - Reduction of environmental impact through decreased CO2 emissions - Lower transportation costs due to mass transport - Increased efficiency of long-distance transportation using rail and shipping - Reduced burden on truck drivers - Alleviation of road congestion due to decreased truck transport *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Food transport materials (cooling, heat retention, etc.)

At Tada Plastic Industry, we can provide insulation boards with vacuum insulation panels (VIP). Our technology places vacuum insulation materials in the core of high-insulation polyurethane, which has been adopted for cargo COOL containers. Modal shift refers to switching to more environmentally friendly and efficient transportation methods that produce less CO2 emissions in cargo transport. For example, converting from truck transport to rail or maritime transport is a common example of modal shift. The benefits of modal shift include: Reduction of CO2 emissions: Rail and maritime transport are more fuel-efficient compared to trucks, helping to reduce CO2 emissions. Alleviation of traffic congestion: Switching from truck transport to rail or maritime transport reduces road traffic, contributing to the alleviation of congestion. Cost reduction: In large-scale cargo transport, rail and maritime transport can be more cost-effective. By using the vacuum insulation panel proposed by our company, logistics efficiency can be improved. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine
• Other consumables
• Vacuum forming machine

The "EPS-10/EPS-12-D" is a diaphragm pump type dry vacuum pump designed for air suction. The "EPS-10," with an exhaust flow rate of 12L/min or more, and the "EPS-12-D," with an exhaust flow rate of 20L/min or more, are used in various applications. Additionally, the rated voltage is DC12V, the suction pressure is -80kPa ±10%, and the guaranteed operating time is 500 hours. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industries: Automotive (mass production), low voltage & home appliances, medical devices, semiconductor equipment *For more details, please download the PDF or feel free to contact us.

• Other pumps

This is a diaphragm pump type dry vacuum pump. It is used in various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industry: Automotive (mass production), low voltage/electronics, medical devices, semiconductor equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This is a diaphragm pump type dry vacuum pump. It is used in various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industry: Automotive (mass production), low voltage/electronics, medical devices, semiconductor equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Achieve the transportation of large volumes of gas compared to our conventional pumps! In a three-cylinder structure compared to a single-cylinder structure: - The cycles of suction, compression, and discharge are evenly distributed, reducing pulsation. (Low pulsation) - Operating noise is also minimized. (Quiet operation) 【Specifications】 - Material: Resin, rubber, assembled products - Lot: 1,000 to 10,000 units - Industries: Automotive (mass production), low voltage & home appliances, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

High magnification foaming molding by expanding the mold cavity volume and enlarging the bubbles.

• Other electronic parts

Ceramic injection molding is a molding method in which a compound made by mixing ceramic powder with a binder and moisture is injected and filled into a mold while heated above the melting point of the resin, followed by cooling and solidification within the mold. It is suitable for mass production of complex shapes and high-precision products.

• Sensors

Representative size 225L box internal dimensions: Length 620 × Width 615 × Height 590 External dimensions: Length 700 × Width 695 × Height 670 Volume: 225L Weight: 8kg Color change available (gray tones, blue tones, others) Logo printing available Size change available (We can accommodate sizes over 200L, please consult us)

• Packaging materials
• Other packaging materials

This is a small DC diaphragm pump with low noise and low pulsation. It features low noise, low pulsation, compact size, lightweight, and self-priming. Rubber components are mainly made of EPDM. It is used in various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industries: Automotive (mass production), low voltage & home appliances, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Craft Cooler Cube" is an eco-friendly, high-performance, and low-cost insulated box made of cardboard. It is compact upon delivery and can be stored in a space-saving manner in a warehouse. Inside, it contains polyurethane used in refrigerators, and by combining it with ice packs, it can transport fresh products without using refrigerated shipping. 【Features】 ■ Logo printing available ■ Water-repellent treatment available ■ Easy disposal for individuals ■ Simple assembly in 10 seconds *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging materials

Bicycle automatic transmission system *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• lens
• Contract manufacturing

Our company is engaged in contract manufacturing of molded products using Kaneka's biodegradable biopolymer "Green Planet." This product is a 100% plant-based biopolymer developed by Kaneka Corporation and has obtained the certification "OK Biodegradable MARINE," which means it biodegrades in seawater. It exhibits excellent biodegradability in a wide range of environments. Our company supports the proliferation of this product through injection molding technology that we have refined over more than 70 years. 【Features】 ■ 100% plant-based biopolymer ■ Obtained the certification "OK Biodegradable MARINE" for biodegradation in seawater ■ Excellent biodegradability in a wide range of environments *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

Urethane is used as a variety of product materials, including industrial products. Currently, there is a shortage of HFO, which is used as a foaming agent, and the consideration of alternative materials has become a challenge. Cyclopentane, like HFO, is a non-fluorinated foaming agent, and its insulation performance and GWP (Global Warming Potential) are similar. Therefore, it may be possible to propose it as an alternative material. We are open to consultations regarding alternatives to HFO. The foaming agent we use, cyclopentane, is not a non-combustible or flame-retardant type. Thank you for your understanding. Foamed urethane molding technology tailored to products and shapes We have foamed urethane molding technologies and equipment such as open-cell foaming, multi-stage press foaming, and box foaming. Utilizing the characteristics of urethane, such as lightweight and insulation properties, we propose applications from materials to uses in home appliances, daily necessities, and more. *For more details, please refer to the PDF materials or feel free to contact us.

• plastic
• others

The "High-Performance Insulated Box" is a product that uses high-insulation polyurethane as insulation material. It features a lightweight design using durable, easy-to-clean, and chemical-resistant PP on the surface, allowing for repeated use. By using it in conjunction with ice packs and PS boxes, it can maintain low temperatures of 2 to 8°C. It is suitable not only for food delivery but also for the transportation of pharmaceuticals and vaccines. 【Features】 ■ Achieves high insulation performance with high-insulation polyurethane ■ Can maintain the internal temperature of the PS box at 2 to 8°C for 32 hours (Based on vaccine insulation performance tests conducted in-house.) ■ Available in standard sizes of 10L and 20L, and can be custom-made up to a maximum of 200L ■ Supports logo printing and color changes *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• Other safety and hygiene products

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with the order of thermal conductivity being "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mK (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mK) *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

The mold is divided into convex and concave parts surrounding the molded product. The convex part is called the core, and the concave part is called the cavity; the core is referred to as the male mold, and the cavity as the female mold. When the cavity and core come together, a hollow space is created, and by injecting plastic into that hollow space, the molded product is completed. The cavity is designed with a slope to facilitate the easy removal of the molded product from the mold. Therefore, the moment the mold opens, the molded product will separate from the cavity. When the mold opens, the molded product sticks to the core. After the mold is fully opened, the molded product on the core side is pushed out by a pin that extracts it from the mold. Thus, when attaching the mold to the injection molding machine, the cavity must always be the fixed side, and the core must be the movable side. *For more details, please refer to the PDF materials or feel free to contact us.*

• Injection Molding Machine

At Tada Plastic Industry, we handle "Insulated Bath Covers." Our technology has achieved high thermal insulation performance with a temperature drop of only 2.0°C after 6 hours, thanks to innovative support structures for energy-efficient bathtubs and the dual insulation layer that overcomes the strength weaknesses of high-performance insulation materials. This has led to high expectations for widespread adoption due to controlled cost increases. We have also established an Insulated Bath Cover Laboratory and received factory registration type certification from the Product Safety Association (SG Mark). 【Features】 - Uses high-performance urethane (cyclopentane material) with excellent insulation and environmental properties - Thermal conductivity: 0.021 W/mk (initial value) - Approximately 30% higher performance compared to typical foamed PS (0.034 W/mk) - Non-fluorine formulation - Ozone depletion potential is "zero," resulting in an extremely low global warming potential *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

In our company, we are capable of handling disposable molded products in the packaging field, including assembly. We have automated visual inspections, and after finishing assembly, we conduct sampling inspections for issues such as bridges and scratches, as well as torque management (for hinges and caps). We carry out consistent operations in a clean room (Class 10000). We strive to deliver high-quality products that ensure safety and traceability to everyone. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we perform undercut processing on undercut-shaped parts using molds in injection molding. Typically, if a product has undercuts, it cannot be molded with a standard top and bottom mold. Usually, undercut shapes are designed using inclined pins, but in cases where cost is a concern or a slight height is acceptable, undercuts may be used. In our company, we may be able to offer solutions even with undercuts. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we conducted a comparative experiment on the water absorption properties of rigid urethane and glass wool. Fiber-based insulation materials (glass wool) have high vapor permeability and moisture retention, and they absorb water and sink when placed in water. The intrusion of water into insulation materials can lead to a significant decrease in insulation performance, as well as the growth of mold and mites, and issues arise due to the weight of the moisture causing them to fall. *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

A pump is a device that mechanically imparts energy to a fluid, increasing its pressure and sending it out. In other words, it transports fluids to higher locations or distant places. 【Types of Pumps】 ■ Non-positive displacement pumps - Centrifugal pumps - Axial flow pumps - Mixed flow pumps ■ Positive displacement pumps - Reciprocating pumps - Rotary pumps ■ Special pumps *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, as part of our efforts towards the SDGs, we crush the runners generated during the injection molding process with a grinder and utilize some of them as recycled plastic. To continue this, it is necessary for us to maintain the profits required as a company, but we believe it is also essential to recognize our role as a more socially responsible entity and to continue our activities accordingly. As part of this initiative, our company supports the "SDGs (Sustainable Development Goals)" advocated by the United Nations and will work towards the realization of a sustainable society. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we perform urethane foam molding tailored to specific shapes. We use high-performance urethane (cyclopentane material) that excels in thermal insulation and environmental properties. The thermal conductivity is 0.021 W/mk (initial value), which is approximately 30% more efficient compared to conventional foamed PS (0.034 W/mk). We have a proven track record in producing high-performance cooler boxes and insulated lids. [Advantages compared to conventional foamed PS (expanded polystyrene) attachment] - Prevention of condensation due to temperature differences - Improved thermal insulation performance - Enhanced adhesion of insulation materials - Design and proposals tailored to the specifications required by customers *This contributes to the improvement of product quality. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we handle small DC diaphragm pumps (micro pumps) for gases and liquids, boasting a delivery record of 10 million units. Rubber components are primarily made of EPDM. They are compact, lightweight, and self-priming, eliminating the need for priming water. For gas applications, they are used for internal pressurization/depressurization, detergent foaming, gas collection, and more. For liquid applications, they are utilized for hot water (boiling water) distribution, spraying various liquids, and other diverse uses. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

We would like to introduce the characteristics of resins used in injection molding. "PA6" excels in chemical resistance, toughness, and impact resistance, and has flexibility. "PA66" not only has excellent chemical resistance but also superior heat resistance and mechanical strength compared to nylon 6. "PC (polycarbonate)" boasts excellent transparency, impact resistance, heat resistance, and flame resistance. Additionally, there are many options such as "POM (polyacetal)," which has low water absorption and excellent sliding properties and wear resistance, making it suitable for bearing applications, as well as "PPE" and "SPS." 【Resin Lineup】 ■ PA6, PA66, PBT, PC, POM, PPE, SPS, PPS, PES, PP, ABS *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we propose to incorporate cooling/insulating functions into bags and similar products. We will perform urethane board molding in a shape that minimizes gaps during sewing. We will propose high-performance insulated bags that are superior to cut urethane board products. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we have applied rigid urethane molding to the insulation material (outer circumference and lid) of hot water storage tank heaters. By placing urethane without gaps between the tank, we can suppress the drop in water temperature inside the storage tank. Additionally, by using fireproof paper, we have achieved a fire-resistant performance while still utilizing urethane. 【Features】 ■ Insulation for the outer circumference and top surface of the storage tank ■ Urethane shaped to fit the tank, using fireproof paper as the surface material - By placing urethane without gaps between the tank, we can suppress the drop in water temperature inside the storage tank (energy-saving) - Space-saving compared to conventional glass wool - Achieved fire-resistant performance while using urethane by incorporating fireproof paper *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

This product is an insulation board that protects fragile vacuum insulation materials. It has been adopted for cargo COOL containers due to our technology that places vacuum insulation materials at the center of high-insulation polyurethane. In addition to improving the space utilization rate of insulated transport containers, it reduces the amount of electricity needed to cool the containers. 【Features】 ■ Industry-leading insulation performance ■ Protection of fragile vacuum insulation materials ■ Utilizes the self-adhesive properties of polyurethane, minimizing the risk of peeling and eliminating gaps between the vacuum insulation and polyurethane, making it less likely to degrade in performance. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

Efforts are being made to replace conventional foaming agents for urethane with non-fluorinated options that have a lower environmental impact. Non-fluorinated urethane foaming agents include water-blown, cyclopentane, and HFO, among others. Water-blown foaming agents have inferior insulation performance compared to alternative fluorocarbons, requiring greater thickness to maintain equivalent performance, which increases costs. However, cyclopentane and HFO do not have performance drawbacks compared to alternative fluorocarbons, and they are expected to accelerate the transition to non-fluorinated options in the future. To continue this progress, it is necessary for companies to maintain the profits required for their operations, but we believe it is also essential to recognize our role as a more socially responsible entity and to continue our activities accordingly. As part of this commitment, our company supports the United Nations' "SDGs (Sustainable Development Goals)" and will work towards the realization of a sustainable society. *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

We will introduce the differences between horizontal and vertical injection molding machines. Injection molding machines come in two types: those that open and close the mold in a vertical direction (vertical type) and those that do so in a horizontal direction (horizontal type). The mold structure is almost the same, but the main difference lies in the space required for the installation of the injection molding machine. Vertical injection molding machines do not take up much width but require height, so they can only be installed in places with high ceilings. Horizontal injection molding machines can be installed even in places with low ceilings. In the past, vertical machines were the mainstream, but recently, due to space constraints, horizontal molding machines have been trending to become the mainstream. *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

This product is an insulated deformation floor cover designed to fit the shape of the bathtub. At Tada Plastic Industry, we propose products that utilize the properties of urethane, and we offer suggestions for shapes and molding methods tailored to our customers' needs based on their intended use and environment. We have established a development environment in-house to meet customer requests and are also focusing on the development of molding techniques to prevent warping and deformation. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we can accommodate general-purpose plastics (precision injection molding) with dimensional tolerances down to 0.005mm and 0.1 microns. We boast an accuracy of less than 1/1000mm, with production lots ranging from 1,000 to 100,000 pieces. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. 【Materials】 ■ ABS: ASA, AES ■ PS (Polystyrene): HIPS, GPPS ■ PP (Polypropylene): PP (contains silicone + antibacterial agent) ■ PE (Polyethylene) ■ AS (Acrylonitrile-Styrene) *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine
• plastic

We handle oil control valves (metal alternatives). We can manage dimensions in microns, and the precision injection molding of automotive parts has a dimensional tolerance of 0.005mm. Additionally, with the IoT implementation in our factory, injection molding is managed via tablets. As long as there is an internet connection, the development status can be checked in real-time from anywhere. 【Features】 ■ Precision molding in a constant temperature and humidity environment ■ Quality system ■ Precision molding machines essential for improving the quality of precision injection molding *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine
• valve

At Tada Plastic Industry, we can provide insulation boards with vacuum insulation panels (VIP). Our technology places vacuum insulation materials in the center of high-insulation polyurethane, which has been adopted for cargo COOL containers. Additionally, leveraging this technology, we have developed a cooling box with vacuum insulation materials. To reduce the power consumption for cooling the containers, we enhance the insulation properties of the entire wall, allowing it to be distributed as an "eco-container." 【Features】 ■ Industry-leading insulation performance ■ Protection of fragile vacuum insulation materials ■ Utilizes the self-adhesive properties of polyurethane, minimizing the risk of peeling and eliminating gaps between the vacuum insulation material and polyurethane, thus reducing performance degradation. *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Other consumables
• Vacuum forming machine

Our company handles functional resin materials that combine the characteristics of rubber and resin, known as 'TPE (thermoplastic elastomer).' When heated, TPE flows like a thick liquid. By molding it with a plastic injection molding machine, parts that would typically require assembly of several components with other materials can be formed into a nearly finished product all at once, without the need for mixing or measuring. There is also no need for deburring. In rubber molding, a vulcanization (cross-linking) process was required separately, but TPE can achieve elasticity without vulcanization. This reduction in processes can lead to cost savings. 【Features】 ■ Lighter and more cost-effective than rubber ■ Shorter production process due to the absence of a vulcanization step ■ Alternative to rubber ■ Recyclable and environmentally friendly material ■ Easy to color *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Other consumables

We manufacture disposable containers in a clean environment by converting our small precision factory (injection molding machines) into clean booths, and we propose dimensional tolerances of 0.005mm (down to 0.1 microns). We will respond with temperature management of precision molding machine molds, which is essential for improving the quality of injection molding (precision), along with equipment that includes sensors. Please feel free to contact us when you need our services. 【Features】 ■ Precision molding equipment in a constant temperature and humidity environment ■ Quality system ■ Essential precision molding machines for improving the quality of injection molding (precision) *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Other consumables

Our company has a delivery record of 35 million units and offers small DC centrifugal pumps (micro pumps) that demonstrate excellent cost performance. They feature a highly reliable sealing mechanism and high durability. They are designed for compact liquid applications. By adopting a magnetic coupling method that utilizes magnetic force, we have eliminated the shaft, ensuring consistently clean discharge. 【Features】 - Achieves compact size, lightweight, and low cost through optimized casing structure - Utilizes a magnetic coupling method - Maintains consistently clean discharge by eliminating the shaft - Long lifespan and tough specifications that easily exceed a total durability time of 200 hours *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Other consumables

At Tada Plastic Industry, we handle pumps that utilize centrifugal force and can operate high-temperature water with magnetic power, even from a distance. We have adopted a method that rotates the impeller in the water passage using magnetic force. Since the water passage and motor are separated, there is no need for a shaft seal, eliminating concerns about liquid leakage. Additionally, we offer an easy-to-maintain detachable type, allowing separation of the pump and motor units, which eliminates the need for drilling holes in the tank. This makes maintenance of the pump unit easier. 【Features】 ■ 35 million units delivered ■ Excellent cost performance ■ Utilizes a magnetic coupling method that harnesses magnetic force ■ High durability ■ Compact size (86g) *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Other consumables

At Tada Plastic Industry, we processed undercut shapes using injection molding with an undercut treatment in the mold. Typically, if a product has undercuts, it cannot be molded with a standard top-and-bottom mold. Usually, undercut shapes are designed using inclined pins, but in cases where cost is a concern or a slight height is acceptable, undercuts may be used. At our company, we may be able to offer solutions even with undercuts, so please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to reach out to us.

• Injection Molding Machine

We would like to introduce "Rigid Urethane (Cyclopentane)" handled by Tada Plastic Industry. It is highly resistant to chemicals, with the exception of strong acids and some solvents. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. 【Chemical Resistance (Partial)】 ■ Seawater: Stable ■ Methylene Chloride: Swelling ■ MEK: Swelling ■ Concentrated Sulfuric Acid: Dissolution ■ Vegetable Oil: Stable *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we are working in collaboration with chemical manufacturers on injection molding using biodegradable polymers as part of our efforts to address the global issue of microplastics. We manufacture plastic products that decompose in nature, contributing to the global environment. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we assist with issues such as re-delivery problems and provide insulation for maintaining low temperatures in delivery boxes. Are you worried that "you can't receive COOL deliveries in a delivery box"? We offer unique proposals for insulation (rigid urethane and cold retention) and design. Since there is no need for expensive mold investments, it is easy to make specification changes, such as adjusting the thickness of the urethane, to meet the required insulation performance. 【Features】 ■ Customizable size specifications ■ No need for expensive mold investments ■ Maintains temperatures below 30°C for up to 10 hours ■ Compatible with security locks ■ Compatible with anti-theft chains ■ Logo printing available *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

We handle small DC diaphragm pumps (micro pumps) of the R27 type for liquids. Rubber parts are mainly made of EPDM. They are compact, lightweight, and self-priming, eliminating the need for priming water. These pumps are used in various applications, including cooling water circulation, condensate water distribution, and ink transportation. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we have applied rigid urethane molding to the insulation material (periphery and lid) of water heater storage tanks. By placing urethane without gaps between the tank, we can suppress the decrease in water temperature inside the storage tank. Additionally, by using non-combustible paper, we have achieved a fire-resistant performance while still utilizing urethane. 【Features】 ■ Insulation of the outer periphery and top surface of the storage tank ■ Urethane shaped to fit the tank using non-combustible paper as the surface material - By placing urethane without gaps between the tank, we can suppress the decrease in water temperature inside the storage tank (energy-saving) - Space-saving compared to conventional glass wool - Achieved fire-resistant performance while using urethane by employing non-combustible paper *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine