多田プラスチック工業 List of Products and Services

At Tada Plastic Industry, we handle the 'Small DC Diaphragm Pump (Micro Pump/Vacuum Pump)' that can be used in rice cookers and other appliances. It features high pressure, low noise, and is compact and lightweight. It is self-priming, so no priming water is needed. We can accommodate orders of 100 to 1,000 units. 【Features of the Small DC Diaphragm Pump (Micro Pump)】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we can accommodate dimensional tolerances of 0.005mm (down to 0.1 microns) for super engineering plastics (precision injection molding). The lot size ranges from 1,000 to 100,000 pieces, boasting an accuracy of less than 1/1000mm. 【Materials】 ■PPS ■PES ■PEEK ■PSF *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

Injection molded TPE (thermoplastic elastomer) is a functional resin material that combines the characteristics of rubber and resin. When heated, TPE flows like a thick liquid. By molding it with a plastic injection molding machine, parts that would typically require assembly of several components with other materials can be formed into a nearly finished product all at once, without the need for mixing or measuring, and without the need for deburring. In rubber molding, a vulcanization (crosslinking) process was required separately, but TPE can achieve elasticity without vulcanization, allowing for process reduction and cost savings. 【Features】 - Lightweight and cost-effective compared to rubber - Shorter production process due to the absence of vulcanization - Alternative to rubber - Recyclable - Environmentally friendly material - Easy to color *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we handle washable partitions. As a measure against infectious diseases, they can be sprayed with water and thoroughly washed. The surface is made of resin board, and the frame is made of elastomer resin, allowing for cleaning with disinfectant spray to keep it hygienic. 【Features】 ■ Size: 750mm × 1800mm × 24mm (maximum size) * For heights exceeding 1800mm, please consult separately. ■ Weight: Approximately 7kg (maximum size) * Made of rigid polyurethane, lightweight. ■ Made of PP, can be wiped clean when dirty or wet. ■ Can be cleaned with disinfectant spray to maintain hygiene. * For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

Regarding units of pressure, the new measurement system uses Pa (Pascal), N/m² (Newton per square meter), and bar as SI units, while Torr is recognized as a non-SI unit for pressure within the body, and mmHg (millimeters of mercury) is recognized for blood pressure. There are two methods for expressing vacuum pressure. The vacuum industry uses absolute pressure, while other industries often use gauge pressure, so when looking at documents or catalogs, it is necessary to check which method is used to express pressure. [Notation of Vacuum Pressure] 1. Absolute pressure with absolute vacuum as 0 (zero) - Often abbreviated with "a" or "abs" after the unit (often omitted) 2. Gauge pressure with atmospheric pressure as 0 (zero) - Often abbreviated with "G" or "Gauge" after the unit (often omitted) *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

At Tada Plastic Industry, we handle "PP + lubricant + antibacterial agent." We add silicone (lubricant) to PP to make it slippery. Additionally, we incorporate an antibacterial agent into the PP. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need our services. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

We will introduce the differences between general-purpose plastics, engineering plastics, and super engineering plastics. "General-purpose plastics" tend to be inexpensive and are used in a wide range of applications, from everyday goods to automotive parts. "Engineering plastics" have a heat resistance of over 100°C and offer superior heat resistance, durability, and mechanical strength (over 50 MPa) compared to general-purpose plastics. "Super engineering plastics" are resins that can withstand temperatures of over 150°C and can be used for extended periods in high-temperature environments. Our company turns ideas into "forms" through technology. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

• Injection Molding Machine

Here is an introduction to the basics of injection molding. Injection molding is a process where heated and melted material is injected into a mold, and by cooling and solidifying, it becomes a molded product. It is suitable for mass production of products with complex shapes and constitutes a major field of molding processing. 【Injection Molding Process】 1. Clamping 2. Injection 3. Holding pressure 4. Cooling 5. Mold opening 6. Product removal *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine

Our company manufactures and sells synthetic resin products, rigid polyurethane foam products, pumps, plastic household goods, and more. We also conduct tests in our soundproof room. Please feel free to contact us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

Our company, which manufactures and sells synthetic resin products, rigid polyurethane foam products, pumps, and plastic household goods, handles "vibration testing equipment." This equipment is suitable for the automotive (mass production), office automation, and medical device industries, so please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices
• Vibration Testing

We offer assembly services for humidifiers, air purifiers, and ion generators. Leveraging our experience in manufacturing various products, primarily electrical appliances, we respond to your company's needs. We will minimize or eliminate capital investment for production and accommodate your requests. Please feel free to contact us when needed. 【Assembly Achievements】 ■ Air Purifiers ■ Humidifiers (Non-compressor) ■ Ion Generators *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• Assembly Machine
• Other assembly machines

We would like to introduce our "Antibacterial Inner Frame (Mask Frame)." It can be washed with detergent or disinfectant alcohol and reused multiple times. By expanding the space inside the mask to prevent the lips from touching, it makes breathing and talking easier. With a unique design that reduces moisture buildup while wearing the mask and minimizes the surface area that touches the skin, it alleviates discomfort during use. 【Features】 ■ Easy to breathe and talk ■ Washable with detergent or disinfectant alcohol for repeated use ■ Prevents lipstick from transferring to the mask as it does not touch the mouth directly ■ Unique design minimizes skin contact, reducing discomfort during wear ■ Prevents breathlessness *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• mask

We would like to introduce our "Antibacterial Inner Frame (Mask Frame)." By expanding the space inside the mask to prevent the lips from touching, it makes breathing and talking easier, and prevents lipstick from transferring onto the mask. With its antibacterial properties, it suppresses bacterial growth and can be used with both disposable and cloth masks. 【Features】 ■ Washable and reusable ■ Prevents makeup smudging and discomfort while breathing ■ Reduces moisture buildup while wearing a mask ■ Antibacterial properties to suppress bacterial growth ■ Usable with both disposable and cloth masks *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• mask

We would like to introduce our products: "Water Purifier, Liquid Delivery Small DC Diaphragm Pump, and Small DC Centrifugal Pump." The "Small DC Diaphragm Pump" tends to be more compact and offers greater design and installation flexibility compared to the Small DC Centrifugal Pump. On the other hand, the "Small DC Centrifugal Pump" provides improved flow rates compared to the Small DC Diaphragm Pump. These pumps are used in various applications, including home and commercial coffee servers and water servers. 【Features】 ■ Small DC Diaphragm Pump - High design and installation flexibility, tends to be compact ■ Small DC Centrifugal Pump - Increased flow rate *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Our company offers precision molding and injection molding (lens molding) of optical components with a dimensional tolerance of 0.005mm (up to 0.1 microns). We possess precision molding machines essential for improving the quality of injection molding (precision) and facilities for maintaining a constant temperature and humidity environment aimed at expanding precision molding. We manage mold temperature and respond with equipment that includes sensors. Please feel free to contact us when you need our services. 【Features】 ■ Transparent ■ Colorless ■ Refractive index ■ No birefringence ■ No chromatic aberration *For more details, please refer to the PDF document or feel free to contact us.

• Other Auto Parts
• lens
• Contract manufacturing

We would like to introduce our "Compact DC Diaphragm Pump R27 Type" that we handle. It is self-priming and does not require a priming water. Both the brushed motor and brushless motor are available in DC12V and DC24V. It is used for various applications including hot water (boiling water) distribution, spraying various liquids, and ink transportation. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Brushed motor: DC12V and DC24V ■ Brushless motor: DC12V and DC24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Air Purifier Small DC Diaphragm Pump Type R27." The rubber parts are mainly made of EPDM. It features a compact size, lightweight design, high pressure, and low noise. It can be used for various applications such as condensation water distribution, ink transportation, and spraying various liquids for liquid steam water supply. 【Features】 - High pressure, low noise - Compact and lightweight - Self-priming, no priming water needed - Motor with brushes: DC12V, 24V - Brushless motor: DC12V, 24V - Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Rigid Urethane Molding (with VIP) COOL Cargo Container." By covering high-insulation urethane with vacuum insulation material, we protect the easily breakable vacuum insulation material. Additionally, by utilizing the self-adhesive properties of urethane, there is no risk of peeling, and there are no gaps between the vacuum insulation material and urethane, making it less likely to experience a decline in performance. 【Features】 ■ By covering high-insulation urethane with vacuum insulation material: - Industry-leading insulation performance - Protection of easily breakable vacuum insulation material - Utilization of urethane's self-adhesive properties eliminates the risk of peeling and gaps between the vacuum insulation material and urethane, making performance decline less likely *For more details, please refer to the PDF document or feel free to contact us.

• container

We would like to introduce our "Air Purifier Compact DC Diaphragm Pump R27 Type." The rubber components are mainly made of EPDM. It features a compact size, lightweight, high pressure, and low noise. It can be used for liquid spraying applications such as hot water (boiling water) distribution, ink transportation, and cooling water circulation. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Cargo COOL Container (VIP) Insulation Board," which reduces the amount of electricity used for cooling. By covering high-insulation polyurethane with vacuum insulation material, we protect the fragile vacuum insulation material. It is suitable for high-insulation walls for residential use and for cold storage boxes that are molded with polyurethane and vacuum insulation material, and it is distributed as an "Eco Container" by enhancing the insulation of the entire wall. 【Features】 ■ By covering high-insulation polyurethane with vacuum insulation material: - Industry-leading insulation performance - Protection of fragile vacuum insulation material - Utilizing the self-adhesive properties of polyurethane, there is no risk of peeling, and there are no gaps between the vacuum insulation material and polyurethane, making it less likely to degrade in performance. *For more details, please refer to the PDF document or feel free to contact us.

• container

This product is an insulation board adopted for cargo COOL containers, utilizing technology that places vacuum insulation material in the center of our high-insulation polyurethane. It reduces the electrical power required to cool the container and improves the space utilization rate of insulated transport containers. By enhancing the insulation of the entire wall, it is distributed as an "eco-container." 【Features】 ■ By covering high-insulation polyurethane with vacuum insulation material: - Industry-leading insulation performance - Protection of fragile vacuum insulation material - Utilizing the self-adhesive properties of polyurethane, there is no risk of peeling, and there are no gaps between the vacuum insulation material and polyurethane, making it less likely to degrade in performance. *For more details, please refer to the PDF document or feel free to contact us.

• container

We would like to introduce our "Humidifier for Medical Devices - Compact DC Diaphragm Pump R27 Type," which features improved design (custom design) capabilities. It is compact, lightweight, and has high pressure and low noise characteristics. The rubber components are primarily made of EPDM. It is used in various applications such as ink transport and spraying of various liquids. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no priming water needed ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Air Purifier for Medical Devices - Compact DC Diaphragm Pump Type R27," suitable for liquid cleaning applications that our company handles. It features high pressure, low noise, compact size, and lightweight, as well as self-priming and no need for priming water. It is used in various applications such as ink transfer and spraying various liquids. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming, no need for priming water ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce our "Small DC Centrifugal Pump (Micro Pump) H-Q." The lift (actual lift) indicates the height from the water surface to the discharge outlet. For example, when calculating the flow rate at a lift height of 1m, it is approximately 2.8L/min according to the characteristic curve. In addition to boasting a delivery record of 35 million units, it features a long lifespan and tough specifications that easily exceed a total durability time of 250 hours. 【Features】 - Achieves compactness, lightweight, and low cost through optimization of casing structure. - Adopts a magnetic coupling method utilizing magnetic force, eliminating the shaft section to maintain a consistently clean discharge. - Long lifespan and tough specifications that easily exceed a total durability time of 250 hours. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Our rigid polyurethane does not undergo hydrolysis due to water absorption. Since the cells are mostly independent bubbles, it is difficult for water to pass through. However, due to the presence of impurities and hydrolysis from radical reactions, as well as the effects of NOX, degradation can occur, albeit in trace amounts. 【Specifications】 ■Material - Resin - Polyurethane - Thermosetting resin *For more details, please refer to the PDF document or feel free to contact us.

• others
• plastic
• Other polymer materials

We would like to introduce our "Compact DC Diaphragm Pump and Compact DC Centrifugal Pump," which are suitable for heatstroke prevention by cooling with water that we handle. They are used in various applications, including cooling (water-cooled) type jackets and water-cooled type pillows. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, Rubber, Assembled Product ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Small DC Diaphragm Pump and Small DC Centrifugal Pump" for heatstroke prevention cooling vests (water-circulating) that we handle. These are also used in various applications such as cooling (water-cooled) jackets and water-cooled pillows. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Resin, Rubber, Assembled Product ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Painting Compressor Airbrush Small DC Diaphragm Pump (Micro Pump) for Gas." Despite its compact size, it boasts high suction and discharge power, achieving both pressurization and depressurization with a single unit. It can handle both air and liquids, designed to meet various requirements, providing a compact and suitable product. 【Features】 ■ Customized design tailored to applications - Compatible with both air and liquids - Designed to meet various needs, offering a compact and suitable product ■ Powerful performance achieving high vacuum - High suction and discharge power despite its compact size - Achieves both pressurization and depressurization with a single unit *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a 'Compact DC Pump' suitable for a cold storage tank (hard urethane) for drink dispensers. It uses high-performance urethane (cyclopentane material) with excellent insulation properties. It can be assembled with blow-molded products and hard foam urethane. The operating temperature range is 5℃ to 50℃, and the storage temperature range is -10℃ to 50℃, complying with food sanitation laws. 【Features】 ■ Can be assembled with blow-molded products and hard foam urethane ■ Performance is less likely to degrade due to condensation prevention ■ Uses high-performance urethane (cyclopentane material) with excellent insulation properties ■ Thermal conductivity: 0.021W/mk (initial value) ■ Approximately 30% higher performance compared to general foam PS (0.034W/mk) ■ Uses materials with a zero ozone depletion potential and extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce a "small DC pump" suitable for a cold storage tank (hard urethane) for drink servers. It uses high-performance urethane (cyclopentane material) with excellent thermal insulation properties. The thermal conductivity is 0.021 W/mk (initial value). It is adopted for various applications, including home and commercial coffee servers and water servers. 【Features】 - Can be assembled with blow-molded products and hard foam urethane - Performance is less likely to degrade due to condensation prevention - Uses high-performance urethane (cyclopentane material) with excellent thermal insulation - Thermal conductivity: 0.021 W/mk (initial value) - Approximately 30% higher performance compared to general foamed PS (0.034 W/mk) - Uses materials with a zero ozone depletion potential and extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a 'Compact DC Pump' suitable for the cooling tank (hard polyurethane) for commercial coffee servers. Compared to general foamed PS (0.034W/mk), it has approximately 30% higher performance. By coating high-insulation polyurethane onto a resin tank, it utilizes the self-adhesive properties of polyurethane, eliminating gaps between the resin tank and polyurethane, which minimizes the risk of peeling and prevents performance degradation due to condensation. 【Features】 ■ Can be assembled with blow-molded products + hard foamed polyurethane ■ Performance is less likely to degrade due to condensation prevention ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation properties ■ Thermal conductivity: 0.021W/mk (initial value) ■ Approximately 30% higher performance compared to general foamed PS (0.034W/mk) ■ Uses materials with a zero ozone depletion potential and extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a 'Compact DC Pump' suitable for cold storage tanks (hard polyurethane) for coffee servers in fast food settings. It uses materials with an ozone depletion potential of zero and an extremely low global warming potential. It can be assembled with blow-molded products and hard foam polyurethane. It is adopted for home and commercial coffee servers, water servers, and various other applications. 【Features】 ■ Can be assembled with blow-molded products and hard foam polyurethane ■ Performance is less likely to degrade due to condensation prevention ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation properties ■ Thermal conductivity: 0.021W/mk (initial value) ■ Approximately 30% higher performance compared to general foam PS (0.034W/mk) ■ Uses materials with an ozone depletion potential of zero and an extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a 'Compact DC Pump' suitable for cold storage tanks (hard polyurethane) for family restaurant beverage servers. It uses high-performance polyurethane (cyclopentane material) with excellent thermal insulation properties. By coating high-insulation polyurethane onto a resin tank, it utilizes the self-adhesive properties of polyurethane, ensuring there are no gaps between the resin tank and the polyurethane, which minimizes the risk of peeling and prevents performance degradation due to condensation. 【Features】 - Can be assembled with blow-molded products and rigid foam polyurethane - Performance is less likely to degrade due to condensation prevention - Uses high-performance polyurethane (cyclopentane material) with excellent thermal insulation properties - Thermal conductivity: 0.021W/mk (initial value) - Approximately 30% higher performance compared to general foamed PS (0.034W/mk) - Uses materials with a zero ozone depletion potential and extremely low global warming potential *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Small DC Centrifugal Pump," suitable for supplying hot water for coffee extraction in coffee drip machines that we handle. We offer models with flow rates of 3.0L/min or more and 3.7L/min or more. It is well-suited for the weak current and home appliance industries, as well as the food machinery and medical device industries. It is used in various applications, including home and commercial coffee servers and water servers. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the "Compact DC Centrifugal Pump" suitable for the transfer of hot and cold water in cup vending machines. Ideal for the weak current and home appliance industries, as well as the food machinery and medical device industries. Compliant with the Food Sanitation Act. It is used in various applications such as home and commercial coffee servers, water servers, and more, with flow rates available in types of 3.0L/min or higher and 3.7L/min or higher. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the "Compact DC Centrifugal Pump" suitable for the distribution of sodium hypochlorite water generation systems. We offer models with a flow rate of 3.0 L/min or higher and 3.7 L/min or higher. The operating environment range is from 5°C to 50°C, and the operating noise is below 50 dB. It can be utilized in various industries, including the low-voltage and home appliance sectors, food machinery industry, and medical device industry. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the "Compact DC Centrifugal Pump" suitable for the water purification circulation of alkaline water purifiers. We can accommodate lot sizes from 1,000 to 10,000 units. This pump can be utilized in various industries, including the low-voltage and home appliance sectors, as well as the food machinery and medical device industries. In addition to complying with the Food Sanitation Act, we offer models with flow rates of 3.0L/min or higher and 3.7L/min or higher. 【Product Lineup】 <Compact DC Centrifugal Pump (Micro Pump) for Liquids> ■CP16P7K12000 ■CP16B7B24100 *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the 'Compact DC Centrifugal Pump' suitable for supplying water to electric kettles. The operating noise is below 50dB and complies with food sanitation laws. There are types available with flow rates of over 3.0L/min and over 3.7L/min. It is used in home and commercial coffee servers, water servers, and various other applications. 【Lineup】 <Compact DC Centrifugal Pump (Micro Pump) for Liquids> ■CP16P7K12000 ■CP16B7B24100 *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Compact DC Diaphragm Pump R27 Type," suitable for label suction air for dry printers that we handle. It is compact and lightweight, designed for gas (pressurized and suction). The brushed motor is available in DC12V and DC24V, while the brushless motor is also available in DC12V and DC24V. It can be utilized in various industries, including the automotive (mass production) industry, OA equipment industry, and medical device industry. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Brushed motor: DC12V and DC24V ■ Brushless motor: DC12V and DC24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce the "Compact DC Diaphragm Pump R27 Type," suitable for label suction air for linerless printers that we handle. It is well-suited for industries such as automotive (mass production), office automation equipment, and medical devices. The lot size can accommodate 1,000 to 10,000 units. This product is a self-priming type with high pressure and low noise, and it is compact and lightweight. 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming ■ Brushed motor: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the "Small DC Diaphragm Pump R27 Type" for label suction air in business-use copiers. The rubber components are primarily made of EPDM. The brushed motor is available in DC12V and DC24V, while the brushless motor is also available in DC12V and DC24V. It is used for various applications including internal pressure/depressure, airbrushing, gas collection, and product adhesion. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Brushed motor: DC12V and DC24V ■ Brushless motor: DC12V and DC24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We would like to introduce our "Compact DC Diaphragm Pump for Liquids," suitable for cooling projectors used in commercial OA equipment. It enables pinpoint air blowing for valve cooling from a distance with strong pressure. The operating temperature range is 5°C to 50°C, and the storage temperature range is -10°C to 50°C, compliant with food sanitation laws. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the 'Compact DC Diaphragm Pump (Micro Pump)' suitable for transferring powder for industrial inkjet printer toner. The rubber components are primarily made of EPDM, featuring self-priming capability and no need for priming water. It is compact and lightweight, making it usable for both gases and liquids. It can be utilized in various industries, including automotive (mass production), office automation equipment, and medical devices. 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no need for priming water ■ Usable for gases and liquids ■ Brushed motor: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing the "Compact DC Pump" suitable for liquid delivery in commercial coffee machines. The "Compact Centrifugal Pump" is a pump that utilizes centrifugal force and can handle high-temperature water, while the "Diaphragm Pump" is a powerful self-priming pump. These pumps are used in commercial coffee machines, water servers, and various other applications. 【Features】 ■ Compact Centrifugal Pump - Unique magnetic coupling method - Available in a separable type for easy maintenance ■ Diaphragm Pump - Custom-designed to suit specific applications - Powerful enough to achieve high vacuum *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Introducing a "small DC pump" suitable for liquid delivery in home coffee makers. Compliant with the Food Sanitation Act. It is used in commercial coffee servers, water servers, and various other applications. We offer a lineup of "small DC diaphragm pumps," which tend to be compact and have high design and installation flexibility compared to small DC centrifugal pumps, as well as "small DC centrifugal pumps," which provide increased flow rates compared to small DC diaphragm pumps. 【Features】 ■ Small centrifugal pump - Unique magnetic coupling method - Available in a separable type for easy maintenance ■ Diaphragm pump - Customizable design tailored to specific applications - Powerful enough to achieve high vacuum *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps