ドムコーポレーション Product Lineup

The "LLR Series" is a diamond indenter that uses only carefully selected high-quality diamonds. Advanced metallurgical technology and diamond polishing and measurement techniques ensure the stable quality of the indenter. 【Product Lineup】 ■LLR-C: Indenter for Rockwell hardness test C scale ■LLR-T: Indenter for Rockwell hardness test C scale / Superficial compatible ■LLR-V: Indenter for Vickers hardness test ■LLR-M: Indenter for Micro Vickers hardness test ■LLR-VK: Indenter for Knoop hardness test ■LLR-MK: Indenter for Micro Knoop hardness test ■LLR-S: Diamond hammer for Shore hardness test *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other work tools

The "SPO Series 2→1" is a one-way screw gauge that allows for measurement in one action, improving work efficiency compared to the traditional two measurements using a plug gauge for through and stop. The through-side screw plug gauge can be inserted without difficulty, and if it stops at the stopper end face, it can be judged as passing. Since the through side acts as a guide, it prevents misjudgment on the stop side. 【Features】 ■ The handle is equipped with a ratchet mechanism to prevent over-tightening. ■ Made from gauge steel (SKS3, HRC58 or higher), it has excellent wear resistance. ■ To ensure customer trust and peace of mind, a inspection report is included. *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other work tools

The "SPW Series" is a carbide screw plug gauge for metric threads that uses carbide only for the frequently used through-side gauge. The blind-side gauge achieves wear resistance and low cost by using conventional SKS3 equivalent steel. 【Features】 ■ Offers 5 to 10 times the lifespan compared to steel plug gauges - Varies depending on the material of the measured object - Can accommodate screw gauges other than standard stock items ■ "Carbide Screw Ring Gauge for Metric Threads" is also available *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other work tools

The "EMC Series" is a pin gauge set that allows for the calibration of the micrometer's instrument tolerance, the feed error of the spindle screw, and the parallelism and flatness of the spindle and anvil at every 1/4 rotation. It can be used for in-house calibration of micrometers and calipers to obtain and maintain ISO 9000 series certification. [Usage Examples] ■ Measurement of the micrometer's instrument tolerance and the feed error of the spindle screw ■ Verification of the parallelism and flatness of the anvil and spindle at every 1/4 rotation *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other work tools

The "SPS Series Pos-T" is a screw position gauge that can measure the position of screw holes with high precision. The screw section conforms to the standards of through-type screw plug gauges, allowing for simultaneous checking of the screw hole's pass. Additionally, it comes with a detachable knurled handle to prevent direct contact with the gauge section (please remove it if it interferes with measurement). 【Features】 ■ The perpendicularity can be confirmed by observing the gap at the end face of the pin gauge section. ■ The gauge material is gauge steel (SKS3, HRC58 or higher), which offers excellent wear resistance. ■ To ensure customer trust and peace of mind, an inspection report for the screw gauge section and pin gauge section is included. *For more details, please download the PDF or feel free to contact us.

• Other work tools
• Other measurement, recording and measuring instruments

We offer a "Just-in-Set" service that allows you to purchase pin gauges in the necessary sizes, in the required quantities, and at the time you need them. Sizes from φ0.200 to φ10.000 are master pin gauges. Please feel free to contact us if you have any requests. 【Combination Examples】 ■ If you want to perform simple dimension checks: A set of 27 pieces with a range of 0.05 around the base of 1.000/2.000…9.00 ■ If you want to perform high-precision measurements: A set of 30 pieces based on 1.000/2.000/3.0 at the 00 standard ■ If you want to use H6/H7/H8 for through and stop from 1 to 10: A set of 40 pieces consisting of 4 pieces of H6/H7/H8 from 1.000/2.000/3.000…/10.000 ■ If you want to store a wide range from thin to thick pins: A set of 39 pieces with increments of 0.5 up to φ20 *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other work tools

This catalog features products from Dom Corporation, which handles pin gauges and thread gauges. It includes the ultra-precision pin gauge set "DT Series," as well as Just-In Sets that can be combined according to your needs, allowing you to purchase the necessary sizes, quantities, and at the right time. [Contents] ■ Master Pin Gauges ■ Ceramic Thread Gauges ■ Just-In Sets *For more details, please download the PDF or feel free to contact us.

• Drive system parts