正英製作所 List of Products and Services

A regenerative burner with an indirect heating method that enables tube efficiency of over 80% (based on exhaust loss). The heat storage medium built into the burner uses a low-pressure loss ceramic porous body. The regenerative system typically alternates between a pair of two burners (regenerative burners) integrated with the heat storage medium, igniting them at intervals of several tens of seconds. When one burner is combusting, its exhaust is discharged through the heat storage medium of the other burner, and when that burner ignites next, the combustion air is preheated using the heat storage medium to recover exhaust heat. For radiant tubes, by installing regenerative burners at both ends of tubes such as U or W shapes and alternating combustion, tube efficiencies of over 80% can be achieved. □ High efficiency (tube efficiency over 80%) □ Compact with built-in heat storage medium □ Low pressure loss of heat storage medium □ Direct ignition allows for time-proportional ON/OFF control □ Uniform surface temperature of the tube □ Minimal combustion noise 【Model (Combustion Capacity)】 RTR-100A (52kW) RTR-125A (75kW) 【Maximum Operating Temperature】 950℃ 【Gas Type】 City gas (13A, LNG) / Propane (LPG)

• Heating device
• Industrial Furnace
• Other heaters

□ Stable combustion is achieved through a unique burner mechanism. □ Stable ignition is ensured by the pilot burner. (Direct ignition specifications are also available.) □ Can be installed on various shapes of tubes. □ Waste heat recovery is possible with a dedicated heat exchanger. 【Model (Rated Combustion Capacity)】 RTE-80A (41kW) RTE-100A (70kW) RTE-125A (93kW) RTE-150A (145kW) 【Gas Type】 City gas (13A・LNG) / Propane (LPG) 【Applications/Track Record】 - Various atmosphere heat treatment furnaces - Indirect hot air generation devices - Liquid heating / Liquid tank heating - Food heating / Food processing

• Heating device
• Industrial Furnace
• Other heaters

With a simple pilot mechanism, it ensures reliable ignition and stable combustion over a wide range. It can also accommodate hot air circulation, contributing to energy savings. (O2≧18%, below 350℃) □ Main combustion Hi-Low-OFF control is also possible. □ A simple and safe flame detection mechanism using a frame rod. □ Durable stainless steel casing that lasts. □ Lightweight for easy installation. (Compared to our conventional models) 【Model (Combustion Capacity)】 DCM-10 (116kW) DCM-20 (233kW) DCM-30 (349kW) DCM-40 (466kW) DCM-50 (582kW) DCM-60 (698kW) 【Duct Air Velocity】 5 to 20 m/s 【Applications/Track Record】 As a hot air generation device duct burner in various fields and equipment: - Painting equipment (paint curing/drying/water removal drying) - Fiber drying - Food processing/food manufacturing (drying ovens/drying equipment) - Spray dryer - Heat treatment furnace - Metal processing - Chemical industry - Drying of wood/leather products - Ceramics/casting - Warm air curtains

• Heating device
• Industrial Furnace
• Other heaters

□Stable combustion is possible regardless of the type of gas. It can be used with city gas (13A, LNG) and propane gas (LPG). □Easy to handle. The combustion blower and burner are integrated, and it is equipped with a combustion safety device. It can be easily ignited with a power supply and ignition switch (control panel specification). □Safe and reliable to use. In case of an abnormal situation, the safety device will cut off the gas and issue an abnormal alarm. □Easy to adjust combustion. By consolidating the fuel adjustment section to the burner body side, adjustments are easy. □Easy maintenance. The detachment and attachment of each component part are simple, making maintenance and regular inspections easy. □In addition to ON-OFF control, Hi-Low control and proportional control can also be selected. □Reliable ignition can be achieved with a direct ignition method. 【Model (Combustion Capacity)】 SBII-70 (81.4 kW) SBII-150 (174.4 kW) SBII-250 (290.7 kW) SBII-350 (407.0 kW) *For use in high-pressure environments and at high temperatures, we recommend the "BJ burner" and "SP burner."

• Heating device
• Industrial Furnace
• Drying Equipment

"Hydrogen combustion," considered a means of decarbonization, is based on the Blue Jet Burner (BJ), which has a wealth of proven performance and is compatible with hydrogen. 【Features】 □ Hydrogen burner (dedicated combustion) that emits no carbon dioxide □ Control mechanisms for air and gas, as well as ignition detection mechanisms, are integrated into the main body, providing good operability and maintainability. □ Metal top/tile top can be selected according to the operating temperature range □ Flame length is the same as 13A/LPG, making it easy to match with existing furnaces 【Applications】 Applicable from low-temperature fields such as drying furnaces to various industrial furnaces like heat treatment furnaces. You can convert your existing BJ burner to hydrogen combustion through parts replacement, allowing for evaluation tests on the impact of hydrogen on workpieces and low-carbon verification. *Note: Piping facilities compatible with hydrogen combustion are required. Please contact us for more details and consultation. News! 【Hydrogen Verification Test Case】 In collaboration with customers aiming for carbon neutrality, we conducted hydrogen verification tests in production sites using "existing furnaces and gas burners." There were no issues with combustion or furnace heating due to hydrogen, and the impact on product quality is currently being evaluated by the customer.

• Heating device
• Industrial Furnace
• Drying Equipment

"Hydrogen combustion," considered a means of decarbonization, developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! A hydrogen gas burner based on the highly proven recuperative burner "STBW." Used in manufacturing processes/industrial furnaces that require high-temperature heat, such as aluminum alloy production (melting, holding, and preheating). 【Features】 □ Zero CO2 emissions during combustion due to dedicated hydrogen combustion □ Built-in waste heat recovery system reduces fuel usage by approximately 30%* □ No need for external heat exchangers as waste heat recovery is possible within the burner itself □ Low-cost and compact with a highly efficient combustion system □ Achieves both low NOx and stable combustion □ Hydrogen combustion can be achieved simply by replacing existing burner components □ Capable of dedicated city gas/natural gas combustion, allowing for adaptation to gas supply conditions (*Based on data from actual furnaces using natural gas) The STBW burner you are using can be converted to hydrogen combustion by replacing parts, allowing for evaluation tests on the impact of hydrogen on workpieces and verification of decarbonization. *Hydraulic equipment compatible with hydrogen combustion is required. Please contact us for more details and consultation.

• Heating device
• Industrial Furnace
• aluminum

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion Suitable for heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces like heat treatment furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by approximately 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! Suitable for aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is 75%, achieving high efficiency. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

• Heating device
• Drying Equipment
• Industrial Furnace

**Features** The Venturi regulator is a Bunsen-type mixer that creates a mixed gas by drawing in atmospheric air due to the negative pressure generated when gas is ejected from the nozzle. It is simple, consisting only of gas line piping. **Compatible Burners** - Pipe burner - Straight frame burner (SF burner) - SR top burner It can also be used with other Bunsen-type gas burners. There are many optional parts available, so please check the catalog for details. CAD drawings are available for download. 2D (DXF), 3D (STEP)

• Heating device
• Drying Equipment
• Other ovens and baking machines

**Electrification of Thermal Equipment** In an uncertain future for energy supply, we are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces) to offer multiple options to our customers as an industrial furnace manufacturer. □ Our electric hot air generator (AH-E) can be substituted for our gas combustion type, allowing for electrification without significant changes to the equipment layout. **Hybrid Heating of Electric and Combustion Types** We have numerous achievements not only in full electrification of thermal equipment but also in hybrid heating that combines the advantages of combustion types. We address challenges such as "securing green power, reducing costs, and ensuring power capacity" through hybrid solutions with combustion types. In addition to enhancing the efficiency of electric systems, we can also implement energy-saving systems that utilize waste heat for gas burners. By incorporating hydrogen gas burners, we achieve carbon neutrality! **We Conduct Practical Verification Tests** We conduct various heating tests at the newly established "Thermal Technology Research Institute" within the Horyuji Center. Among these, the "QCO Test Facility" allows for heating tests using four different heat sources! We propose thermal equipment suitable for your work using gas, electric, hydrogen, and hybrid heat sources.

• Heating device
• Drying Equipment
• Industrial Furnace

An infrared Schwank burner that can heat all objects without contact. A gas burner that can provide powerful heating without direct flames through surface combustion with a ceramic plate. It reduces gas consumption for efficient combustion, contributing to energy savings. 【Features】 1. Ideal for heating food Most of the infrared wavelengths emitted from the heated ceramic plate are between 2-4μm. This wavelength range has the highest thermal energy and is particularly easily absorbed by water, making it perfect for heating, drying, and cooking food. 2. Flexible installation orientation The heating direction can be upward, downward, or sideways, regardless of the installation orientation. It can be used according to the desired direction for browning. 3. Good installation characteristics Its lightweight and compact casing make installation easy. It can be ignited simply by connecting LNG (13A/city gas) or LPG (propane gas). 4. Wide range of sizes With a rich lineup of combustion volumes and combustion areas, you can choose the most suitable model for your equipment. For more details, please refer to the gas burner product catalog. Feel free to contact us.

• Food Processing Equipment
• Heating device
• Other food machinery

Single-end radiant tube burner for metal heat treatment furnaces The hydrogen-only version of the "TRF Burner" has debuted! This is a high-efficiency, energy-saving type gas burner equipped with a heat exchanger inside. It utilizes an indirect heating method that takes advantage of radiant heat from the heat transfer tube, and it has a wide range of proven applications in various atmosphere heat treatment furnaces, sintering furnaces, and food heating. 【Features】 □ Zero CO2 emissions during combustion due to hydrogen-only burning □ Achieves uniform tube surface temperature distribution even with hydrogen combustion □ High efficiency with a burner efficiency of 75% thanks to the built-in heat exchanger □ NOx emissions are equal to or lower than those of city gas □ Stable hydrogen gas combustion achieved with a "dual gas nozzle" compatible with city gas/LPG specifications □ Existing gas burners can be converted to hydrogen gas burners through parts replacement *The current TRFH burner can be converted to hydrogen combustion through parts replacement. Please inquire as there is a matching requirement with the furnace.

• Heating device
• Industrial Furnace
• Other heaters

Aluminum (non-ferrous metal) melting and holding furnace SMK Series We have a wealth of experience not only in Japan but also in China and Southeast Asia (Vietnam, Thailand, etc.). We can provide detailed layout designs tailored to die casting machines, so please feel free to contact us. 【Features】 ◇ We offer flexible responses with custom-made designs ◇ Equipped with flat frame burners that suppress the generation of oxides ◇ A new design that does not directly apply flame to the molten metal surface, preventing surface agitation ◇ Features newly developed melting burners that consider flame length, diameter, and speed ◇ Standardly equipped with combustion safety devices ◇ Melting capacity ranges from 100 kg/h to 1000 kg/h Additionally, we handle various aluminum industrial furnaces, including melting and holding furnaces (SMH) with further oxide suppression structures, electric holding furnaces (SEUD), centralized melting furnaces (STM), and aluminum heat treatment furnaces.

• Industrial Furnace

Aluminum (non-ferrous metal) centralized melting holding furnace STM Series We have extensive experience not only in Japan but also in China and Southeast Asia (Vietnam, Thailand, etc.). We can provide detailed layout designs tailored to your factory. 【Features】 ◇ We offer flexible responses with custom-made designs. ◇ We also offer an integrated type with a degassing chamber between the uniquely structured holding chamber and the trough. This allows for direct feeding into the holding furnace without the hassle of GBF treatment in the degassing device, preventing a drop in molten metal temperature. ◇ We adopt flat frame burners for holding that suppress the generation of oxides. ◇ A new design that does not directly apply flame to the molten metal surface, preventing agitation of the surface within the holding chamber. ◇ Equipped with newly developed melting burners that consider flame length, flame diameter, and flame speed. ◇ Standardly equipped with combustion safety devices. ◇ Melting capacity ranges from 500 kg/h to 1500 kg/h (consultation available for over 1500 kg/h). ◇ We also offer the SMH-C version of the centralized melting furnace with oxidation suppression for hand-held operations. Others We handle melting holding furnaces (SMH) with further oxidation suppression structures, electric holding furnaces, hand-held melting and holding furnaces, and aluminum heat treatment furnaces, among various aluminum industrial furnaces.

• Industrial Furnace
• Heating device
• aluminum

The SHOEI butterfly valve series is a butterfly valve with an opening degree indicator for flow adjustment. The "BVM" manual type allows the opening degree setting to be fixed with a locking screw and features a full-port design with minimal pressure loss. 【Product Specifications】 ◇ The fluid used is air (combustion air), city gas (13A, natural gas, LNG), or propane gas (LPG). ◇ The fluid temperature is below 60°C. ◇ The fluid pressure is below 10 kPa. (Please consult us if you are considering specifications outside of the above.)

• valve
• Heating device
• Industrial Furnace

The SHOEI Butterfly Valve Series is a butterfly valve with an opening degree indicator for flow adjustment. The "BVC" control valve can be used in conjunction with control motors (compatible with various manufacturers) and features a wide range for reduce port and handle adjustments, providing high flow control performance. 【Product Specifications】 ◇ The fluid used is air (for combustion), city gas (13A, natural gas, LNG), and propane gas (LPG). ◇ The fluid temperature is below 60°C. ◇ The fluid pressure is below 10 kPa. (Please consult us if you are considering specifications outside of the above.)

• valve
• Heating device
• Industrial Furnace

The "AH-B" can be used as a hot air generator for food heating, paint drying, fiber drying, deodorization devices, and heating devices. 【Features】 1. Maximum hot air temperature of 800°C. 2. Equipped with a burner that can handle high furnace pressure conditions. 3. Energy-saving as it can accommodate hot air return temperatures up to 350°C. 4. Utilizes highly reliable combustion equipment, with an automatic safety combustion device included as standard for safety. 5. Compactly integrated piping equipment that excels in maintainability. 6. Customizable design according to usage conditions. 7. An indirect hot air type (AH-BX) with an external heat exchanger is also available. For more details, please refer to the catalog.

• Heating device
• Industrial Furnace
• Other painting machines

【Features】 ◇ It is a packaged type that is pre-assembled in the factory. ◇ It achieves a thermal efficiency of 90%. ◇ It is compatible with high-temperature hot air circulation in the heat dissipation line. ◇ It has high maintainability, equipped with inspection doors in various locations. ◇ The gas burner is equipped with safety devices such as automatic ignition and flame detection, allowing for safe use.

• Heating device

At Shoei Manufacturing, which has extensive experience with painting drying ovens and exhaust gas treatment systems, we offer a lineup of "hydrogen combustion type" and "electric heater type." By using "renewable energy sources" and "hydrogen fuel," we can achieve decarbonization. Even if these options are not currently available, we can adapt to the uncertain future of energy supply by introducing: - A hybrid type that electrifies part of the heat source configuration - Hydrogen gas burners that can also use city gas/propane gas. 【Painting Baking Drying Oven】 Hot Air Zone (100–250°C) ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" Radiant Baking Heating Zone (700–850°C) ⚪︎ Electric infrared heater ⚪︎ Hydrogen combustion burner Water Removal Drying Oven (100–150°C) / Booth Heating ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" 【Exhaust Gas Treatment System / VOC Treatment】 ⚪︎ Electric catalytic deodorization device (CT) ⚪︎ Electric regenerative thermal oxidizer (RTO) Our Thermal Technology Research Institute is equipped with a painting drying test oven (QCO) with a painting booth.

• Painting Machine
• Drying Equipment
• Heating device

The EIM burner is a gas burner of the nozzle mix type that produces a high-brightness, straight flame. It has a large turndown ratio, achieving stable combustion across the entire range of combustion volume. Stable combustion is obtained across the entire range of combustion volume, eliminating concerns about backfire in low combustion areas. In applications such as aluminum melting furnaces, the radiant heat from the high-brightness flame improves melting efficiency. You can choose a direct ignition method, which eliminates the need for a pilot burner, simplifying the piping system. It has a structure that is easy to disassemble and maintain. It achieves stable combustion at a low air ratio, minimizing excessive oxygen that can cause oxides and improving fuel efficiency. 【Features】 ■ Stable combustion is achieved ■ The flame is a high-brightness straight flame ■ The combustion system is simple ■ Easy to install ■ Maintenance and inspection are easy *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace
• aluminum
• Non-ferrous metals

The EIRS burner is a gas burner of the nozzle mix type that produces a high-brightness flat flame. The swirling flat frame prevents the flame from contacting the aluminum melt, allowing the melt surface to be gently maintained, which suppresses the generation of oxides. It has a large turndown ratio, achieving stable combustion across the entire range of combustion amounts. The radiant heat from the high-brightness flame improves fuel efficiency. By maintaining stable combustion at a low air ratio, it minimizes excessive oxygen, which can cause oxides. Preheated air is available (up to 300°C). Since it uses a direct ignition method, a pilot burner is not required, simplifying the piping system. 【Features】 - Stable combustion can be achieved - The flame is a high-brightness swirling flame along the furnace wall - The combustion system is simple - Preheated air can be utilized - Easy maintenance and inspection *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace
• aluminum
• Non-ferrous metals

**Exhibition Information** An information dissemination event from Kansai consisting of product and technology exhibitions of industrial furnaces and related equipment, as well as seminar presentations and lectures. We will be exhibiting at Thermal Technology 2024. Date: October 10 (Thursday) and 11 (Friday), 2024, from 10:00 to 17:00 Venue: Grand Front Osaka, North Building, B2F **Latest! Hydrogen Gas Burner Lineup** Hydrogen combustion with zero carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners. We offer a wide range of products suitable for various temperature ranges and types of thermal equipment. **Electrification of Thermal Equipment** We are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces). The newly developed electric hot air generator (AH-E) can replace our gas combustion type. **Hybrid Heating of Electric and Combustion Types** In addition to full electrification of thermal equipment, we have numerous achievements in hybrid heating that combines the advantages of combustion types. In addition to improving the efficiency of electric systems, energy-saving systems that utilize waste heat for gas burners are also possible. **Test Equipment Available** The Thermal Technology Research Institute offers various test furnaces, including hydrogen combustion testing!

• Heating device
• Industrial Furnace
• Drying Equipment

The catalytic combustion deodorization device "CT Series" is an environmental device that uses a catalyst to oxidize and decompose odors and VOCs at around 350°C, rendering them harmless for discharge. It comes standard with a heat exchanger that preheats the odors and recovers about 50% of waste heat, contributing to energy savings. We provide various deodorization devices that effectively handle a wide range of odors, such as those from painting drying ovens, printing drying, and food processing. 【Features】 ■ High energy-saving effect ■ High deodorization efficiency ■ Excellent safety ■ Excellent durability ■ Compact ■ Easy operation ■ Heat sources can be either electric or gas

• Industrial Furnace
• Other painting machines
• Electric furnace

**Features of SHOEI's Aluminum Equipment** - Optimal design can be achieved according to processing conditions (T-4, T-5, T-6, etc.) and processing volume. → We have accumulated experience and achievements in high-temperature fields across various industries, including automotive parts, aluminum castings, iron, and non-ferrous metals. - Both gas and electric heat sources can be selected. Furthermore, we propose energy-saving, low-carbon, and decarbonization technologies that consider the environment! ○ Hybrid heating with electricity and gas ○ Waste heat recovery using heat exchangers ○ Waste heat recovery gas burners ○ Low NOx gas burners ○ Optimal control of air-fuel ratio ○ High-efficiency electric heaters - A lineup of batch, continuous, and basketless types is available. → We propose furnace bodies tailored to conditions such as small quantities of diverse products or large quantities of a few products. → Flexible design considering installation locations is possible. We contribute to improved production efficiency with optimal designs that include ancillary equipment.

• Industrial Furnace
• Heating device
• aluminum

The hot air generation device can be used as a heat source for drying ovens, heating furnaces, and various industrial furnaces, as well as in drying processes for painting equipment and food processing, making it suitable for a wide range of applications. 【Feature 1】 We offer a variety of heat sources and heating methods. ○ Gas type (compatible with city gas, propane gas, and hydrogen gas combustion) ○ Electric type (capable of achieving outlet temperatures equivalent to gas combustion type with clean hot air) ○ Indirect type (clean hot air using a heat exchanger) 【Feature 2】 We have a rich selection of combustion volumes and heater capacities. ○ Gas type: 47kW to 2300kW ○ Electric type: up to 470kW 【Feature 3】 (Model in parentheses) Flexible selection tailored to drying equipment is possible. ○ You can choose "clean hot air" that does not contain combustion exhaust gases, whether gas or electric type. (AH-BX, AH-E) ○ It can also accommodate high furnace pressure. (AH-B) ○ High-temperature hot air up to 800℃ (AH-B) ○ Hot air return is possible (AH-B, AH-D, AH-E) ○ Design can be customized according to the installation location. (All AH models) ○ Various safety devices are standardly equipped. For more details, please download the catalog or contact us.

• Heating device
• Industrial Furnace
• Electric furnace

The "hydrogen-only specification" of the pre-mixed duct burner series, which has a proven track record as a heat source for hot air generators, has made its debut. It is a decarbonized gas burner that achieves both stable combustion and low NOx performance. 【Features】 1. Hydrogen combustion gas burner that emits no CO2 during combustion. 2. Unique casing structure that balances durability and combustion performance, with a turn-down ratio of over 20:1. 3. A lineup of combustion capacities up to "465 kW." 4. Clears emission regulation values through low NOx combustion technology (tested with our equipment). 5. The ignition pilot burner is also equipped with a hydrogen-only specification. 6. Can be replaced with existing burners. As a heat source for hot air generators, it can be used in painting drying ovens, food drying ovens, various drying furnaces, drying equipment, and heating furnaces. Hydrogen combustion demonstrations are currently being conducted at the Thermal Technology Research Institute. We invite you to visit.

• Drying Equipment
• Industrial Furnace
• Heating device

This is a heat treatment furnace that loads workpieces onto a cart and heats them inside the furnace along with the cart. It can operate over a wide range from 400°C to over 900°C. By adopting a high-speed burner, it achieves a uniform temperature distribution inside the furnace through convective heating of the furnace atmosphere. We also propose the installation of a "heat exchanger" and a "burner compatible with hot air." This allows for the utilization of exhaust heat, enabling the construction of an energy-saving system that reduces fuel consumption.

• Metal bearings
• Industrial Furnace
• Steel

This is a drying furnace that scatters workpieces after dip-spin coating on a mesh belt conveyor, sends them into the furnace, and performs processing. It is also possible to design a furnace with zones such as preheating, curing, and cooling zones. Additionally, by using a direct combustion deodorization device, it is possible to deodorize odors such as VOCs generated during processing. Furthermore, we can also propose a heat recovery system that exchanges high-temperature exhaust after deodorization and reuses it in the curing furnace!

• Industrial Furnace
• Heat Treatment Drying Equipment
• Electric furnace

This is a batch furnace for electric heater drying after carbonizing the motor rotor in varnish. It uses an inner fan for hot air circulation and has a compact design.

• Other drying equipment
• Drying Equipment
• Industrial Furnace

This is an electric drying oven equipped with an automatic lift door powered by an air cylinder and an input/output mechanism for conducting painting evaluation tests. The processing airspeed can be varied through inverter control of the circulation fan. Regarding the hot air discharge temperature, a thyristor control method for the electric heater is adopted, allowing for a wide range of temperature settings.

• Other painting machines
• Drying Equipment
• Industrial Furnace

Equipped with a unique retention flame mechanism, it achieves a stable flame. It allows for safe combustion control with automatic ignition and flame detection. 【Features】 ◇ Flexible design tailored to the length of the pipe and the required combustion volume ・Please let us know the desired length of the combustion surface and the combustion volume. ◇ Stainless steel options are also available. ◇ A wide variety of choices from the number of units to connection shapes ・ We can flexibly accommodate from single to multiple units. ・ Connection shapes include I-type, T-type, L-type, H-type, and more. ・ Pipe diameters range from 15A (1/2B) to 50A (2B). (Please consult us for other sizes.) ◇ Automatic ignition and flame detection options are also available. ◇ Benzene combustion without the need for a combustion blower is possible.

• Pipe burner type fryer
• Food Processing Equipment
• Heating device

By installing a heat exchanger in the existing paint drying oven and recovering the exhaust heat from the oven, the combustion air for the burner is preheated. The temperature difference from the preheating of the combustion air contributes to energy savings.

• Industrial Furnace