八洲電装 List of Products and Services

High-recovery ethylene propylene diene monomer (EPDM) rubber, when used as airtight seals for equipment handling powders or waterproof seals for liquids, exhibits extremely low compression deformation even after prolonged use, ensuring that the seals do not "sag." By utilizing this feature, it becomes possible to significantly reduce the frequency of seal replacements in hard-to-maintain areas deep within machinery. As a material, EPDM excels in chemical resistance, cold resistance, ozone resistance, and aging resistance. Its inherent elasticity as sponge rubber, combined with its non-sagging characteristics and consistent load response, allows it to also be used as "damping material." High-recovery rubber sponge has extremely low permanent deformation, providing excellent shape retention, and it instantly returns to its original form even after being subjected to prolonged pressure. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below measurement limit - Flame retardant/oil-resistant grade (railway flame retardant compliant) * Custom cutting to required lengths available, with adhesive tape for delivery - Instantly recovers from a compressed state - High shape retention - Extremely low permanent deformation - Soft sponge suitable for a wide range of applications

• Rubber
• Water Hydraulic Equipment
• Food Processing Equipment

This is a DC high-voltage power relay that can be used for battery main circuit control in electric vehicles, buses, trucks, construction machinery, and special vehicles. It is capable of detecting disconnections and short circuits, providing robust protection for electrical systems. Its structure does not require gas, eliminating the risk of explosions due to arcs or gas leaks. ■ Compact and lightweight ■ Minimum arc structure that does not require gas ■ Capable of detecting disconnections and short circuits ■ Bidirectional charging possible ■ Energy-saving structure with latching mechanism Applicable standards: ISO16750, IATF16949, ECE R10 E-T-A is a manufacturer specializing in circuit protectors and relays, founded in Germany in 1948. As a top brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Densou, as a technical trading company for electronic components, is promoting sales activities, including technical support in collaboration with E-T-A's Japanese subsidiary, and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

The intelligent distribution module is a smart distribution and control unit that can significantly upgrade traditional fuse boxes. There are two versions available: a semiconductor version that allows pre-setting of protection functions for each channel via CAN connection, and a socket version that enables users to incorporate ISO micro relays and fuses. It is compatible with various platforms such as electric vehicles, buses, trucks, construction machinery, special vehicles, agricultural machinery, and construction equipment, and has environmental resistance compliant with IP67. Even in the relay-fuse version, it is compact, but the semiconductor version greatly improves layout flexibility due to its overwhelmingly thin shape. The main functions include the ability to initialize devices via CAN, switch load outputs, monitor current and voltage output states in real-time, quickly send diagnostic data to the master controller, and achieve smart predictive maintenance and load management. In the semiconductor version, each channel can be set up to a maximum of 30A with CAN control. You can choose between 8-channel or 12-channel specifications.

• relay
• Other terminal blocks
• fuse

This is a bus sonar system composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of supporting up to 8 channels. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and in the bus sector, it has achieved over 2,000 units in sales within 6 years of its launch. The core ultrasonic sensor elements of the system use Japanese-made sensors that hold a 60% share in the global market. The basic configuration of the system comes in two types: - On-screen display type that shows detection distance with a backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted in some parts. *Compatible with both 12V and 24V. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

EDT Corporation in Taiwan develops and manufactures touch panel products in-house at its factories in Taiwan and China. By utilizing proprietary technology, we combine manufacturing processes, touch ICs, touch drive methods, and sensitivity adjustment software to create optimal products tailored to customer needs, achieving fine touch sensitivity. In addition to non-contact capabilities, our products can maintain touch sensitivity even in environments with mist, water droplets, and showers, and we also offer types that can operate under conditions that were previously difficult, such as wearing leather gloves or double-layered work gloves. Our non-contact touch panels can meet the needs arising from COVID-19 countermeasures. LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factories: Kaohsiung, Taiwan; Dongguan, China (TS16949) Founded: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen (as of 2021) Listed on the Taiwan Stock Exchange Our products are designed with the premise of industrial equipment, ensuring long-term supply as much as possible. *Yashima Denso is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation Smart Embedded Product Configuration: Integrated TFT + CTP + Embedded board OS: RTOS Input Voltage: 7V ~ 36V (can be used over a wide range, not just a single voltage) CTP (Software/Hardware): Yes TFT (Software/Hardware): Yes Custom Design: Available (interface, CTP, TFT can be modified) Source Code: Available (interface, CTP, TFT) *Interfaces: WIFI, BT, SPI, UART, I2C, GPIO, USB, RS485... GUI Support: Free for Touch GFX LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen (as of 2021) *Listed on the Taiwan Stock Exchange *Yashima Denso is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation LCD Panels (For Replacement Solution) Size Res. Model Number Mass Production Start 8.4" 1024 x 768 ET084030DVA 2021 10.4" 1024 x 768 ET104030DSA 2021 12.1" 1024 x 768 ET121030DVA 2021 LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen *2021 *Listed on the Taiwan stock market These products are designed with the premise of industrial equipment and are made to ensure long-term supply as much as possible. *Yashima Densou is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation manufactured LCD panels (For Replacement Solution) Size Res. Part Number Sample Mass Production Start 8.4" 1024 x 768 ET084030DVA End of December 2021 10.4" 1024 x 768 ET104030DSA End of December 2021 12.1" 1024 x 768 ET121030DVA End of December 2021 LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen *2021 *Listed on the Taiwan Stock Exchange These products are designed with the premise of industrial equipment, ensuring long-term supply as much as possible. *Yashima Densou is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Our waterproof and dustproof electric fans are highly suitable for heavy-duty applications such as automobiles and construction machinery, and they are widely used in agricultural machinery both domestically and internationally. We offer both 12V and 24V types, with a wide range of electric fans including brush motor types, brushless motor types, and DC axial fans. All production processes are carried out in our own factory in Italy, implementing every step from raw material processing, resin molding, circuit board assembly, to finished product inspection in-house. Our products can be adapted for construction machinery, agricultural machinery, large commercial vehicles, and buses, addressing exhaust gas regulation measures through the electrification of direct drive fans and improving fuel efficiency through multi-cooling. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and high airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and completely sealed, protecting against the intrusion of solid and liquid substances. We can also provide custom-made shrouds and designs/production of fans tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

Our waterproof and dustproof electric fans for heavy-duty applications, such as automobiles and construction machinery, are widely adopted in agricultural machinery both domestically and internationally. We offer both 12V and 24V types, with a wide range of electric fans including brush motor types, brushless motor types, and DC axial fans. All production processes are carried out in our own factory in Italy, implementing every step from raw material processing, resin molding, circuit board assembly, to finished product inspection in-house. Our products are suitable for construction machinery, agricultural machinery, large commercial vehicles, and buses, addressing exhaust gas regulations through the electrification of direct drive fans and improving fuel efficiency through multi-cooling. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

By minimizing the bending sections of pipes, we can improve the flexibility of the liquid cooling pipe layout for vehicle-mounted batteries. Additionally, eliminating issues related to welding and achieving high press-fit outer diameter tolerances can lead to improved quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven results guaranteeing a range of 15μ after surface treatment This can reduce the layout restrictions of piping for units requiring liquid cooling and contribute to reduced pressure loss. We have a proven track record for domestic vehicle inverters and are currently mass-producing approximately 160K units annually!

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

By minimizing the bending parts of pipes, we can improve the layout flexibility of onboard inverters and motors. *We have a proven track record with domestic HEVs and PHEVs, currently producing around 160K units annually! By eliminating issues caused by welding and achieving high press-fit outer diameter tolerances, we can enhance quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven track record of guaranteeing a range of 15μ after surface treatment This can reduce the limitations of piping layouts for units requiring liquid cooling and also contribute to reducing pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

By minimizing the bending parts of pipes, we can improve the flexibility of the piping layout for onboard inverters and motors. Additionally, by eliminating issues related to welding and achieving high tolerances for the outer diameter of press-fit parts, we can enhance quality. We have a proven track record with domestic HEVs and PHEVs, currently producing around 160K units annually! "Outer Diameter Tolerance of Press-Fit Parts" Proven record of a guaranteed range of 15μ after surface treatment. Bending: Minimum bending center radius (R) = 0.75D Press-fit: Tolerance range = 15μ (Minimum) Flattening: Cross-sectional area reduction rate = 13% (Minimum) Example of a record for minimal R bending: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center radius *0.6D is also possible under certain conditions. We can reduce the limitations of piping layouts for units requiring liquid cooling, contributing to a decrease in pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

We sell electric fans such as DC axial fans, brush motor types, and brushless motor types as mass-produced components. Waterproof and dustproof electric fans for heavy-duty applications such as automobiles and construction machinery 12V, 24V All processes from raw materials to products are managed in Italy, and the production process is carried out at our own factory in Italy. We also have quality evaluation capabilities and can conduct evaluations in-house. By electrifying direct drive fans, they are adopted in construction machinery, agricultural machinery, large commercial vehicles, and buses that require measures for exhaust gas regulations and fuel efficiency improvements. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120℃ - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and are completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

Improvements can be made to the restrictions around pipes that hinder flexibility during the layout of vehicle-mounted inverters and motors. Additionally, eliminating issues caused by welding joints and achieving high press-fit outer diameter tolerances can enhance quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven record of guaranteeing a range of 15μ after surface treatment By reducing the restrictions on piping layouts for units that require liquid cooling, it also contributes to a reduction in pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

Evaluation of third-party components necessary for automotive development. Since the purchased evaluation vehicles undergo various assessments, it often takes time for the components to reach the engineers at the part level. Our company procures reverse-engineered automotive parts, primarily focusing on domestic automobile manufacturers while also accommodating overseas manufacturers. If you would like to purchase parts without mentioning your company name or need to quickly obtain parts for newly released vehicle models, please feel free to consult with us.

• Other Auto Parts
• Other machine elements

DC axial fans, brush motor type, brushless motor type. A wide range of waterproof and dustproof electric fans for heavy-duty applications such as automobiles and construction machinery are available in the standard lineup. As a result, there are more options for high-output and quiet models compared to existing domestic electric fans. 12V, 24V. All processes from development to resin molding, circuit board assembly, and production assembly are carried out in our own factory in Italy. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large air volume - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness The IP68 certified motor is completely sealed, protecting it from the intrusion of solid and liquid substances. It has a proven track record of use in environments with muddy water, such as rice fields, and in situations where grass clippings can easily clog, like in riding lawn mowers. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

DC axial fans, brush motor type, brushless motor type. Waterproof and dustproof electric fans for heavy-duty applications such as automobiles and construction machinery. 12V, 24V With the electrification of direct drive fans, they are adopted in construction machinery, agricultural machinery, large commercial vehicles, and buses that require measures for exhaust gas regulations and fuel efficiency improvement. All processes from raw materials to products are managed in Italy, and the production process is carried out in our own factory located in Italy. Quality evaluation is also conducted in-house. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large air volume - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, vibration resistance, and excellent harshness All motors certified to IP68 are waterproof (WP) and are completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

Advantages of semiconductor contact-type (electronic) relays: - No physical contacts (contactless structure), eliminating issues caused by oxidation or freezing - Switching frequency of 200 times per second - Guaranteed over 1 million switching operations - No contact noise and noise-free, effective for EMC measures E-T-A is a specialized manufacturer of circuit protectors and relays, founded in Germany in 1948. As a top-class brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Densou, as a technical trading company for electronic components, promotes sales activities including technical support in collaboration with E-T-A's Japanese subsidiary and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

Small single-pole thermal circuit protector. It features a cycling trip-free mechanism that allows for reset, and has the same terminal shape as automotive blade fuses. *Uses a color code similar to that of fuses. (With housing or release button) For use with the same rated current as automotive blade fuses, please inquire separately about model 1616. There is also a mini fuse type single-pole circuit protector available. Complies with ISO 8820-3, Type F. The color of the product is distinguished by its rated current, which follows the same color code as blade fuses. Complies with SAE J553 requirements. E-T-A is a specialized manufacturer of circuit protectors and relays founded in Germany in 1948. As a top brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Densou, as a technical trading company for electronic components, promotes sales activities including technical support in collaboration with E-T-A's Japanese subsidiary, and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

This is a power relay that is strong against inrush current and has extremely few contact failures. It is a mechanical contact relay that can switch continuous loads of up to 300A (DC12V, 24V). It guarantees 50,000 switching cycles for capacitive and inductive loads. The main terminals can be selected from M8 or M10 stud terminals. The product mounting flange can be installed on the back and sides. The MPR series, which is essential for buses, trucks, construction machinery, and agricultural machinery, not only has high vibration and shock performance but also features a high protection rating of IP6K9K, making it ideal for applications that require high environmental resistance. E-T-A is a specialized manufacturer of circuit protectors and relays founded in Germany in 1948. As a top brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Densou, as a technical trading company for electronic components, is promoting sales activities including technical support in collaboration with E-T-A's Japanese subsidiary and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

This is a DC high-voltage power relay that can be used for battery main circuit control in electric vehicles, buses, trucks, construction machinery, and special vehicles. It is capable of detecting disconnections and short circuits, providing robust protection for electrical systems. Its structure does not require gas, eliminating the risk of explosions due to arcs or gas leaks. ■ Compact and lightweight ■ Minimum arc structure that does not require gas ■ Capable of detecting disconnections and short circuits ■ Bidirectional charging possible ■ Energy-saving structure with latching mechanism Applicable standards: ISO16750, IATF16949, ECE R10 E-T-A is a manufacturer specializing in circuit protectors and relays, founded in Germany in 1948. As a top brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Denso, as a technical trading company for electronic components, is promoting sales activities, including technical support, in collaboration with E-T-A's Japanese subsidiary and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

As a one-stop trading company for plastic injection molded products, we have extensive experience and achievements in important safety components for drive and steering systems, as well as in electric systems, particularly in sensor housings, terminal blocks, and bus bars. Our employees include experienced engineers and quality technicians who are well-versed in mold design and molding conditions, and we utilize CAD to provide optimal proposals that excel in QCD (Quality, Cost, Delivery). We also have experience in responding to the PPS (Polyphenylene Sulfide) conversion of coolant control valves, which are central to the thermal management systems of electric vehicles as next-generation technology. As a technical trading company, we provide consistent support from the product planning stage through mold design, mass production, mold updates, and maintenance and discontinuation responses, and we are capable of handling production and sales both domestically and internationally. Our mold and molding factories offer proposals by selecting the most suitable factory from multiple partners, both domestically and internationally, tailored to our customers' needs, delivering finished products with an excellent balance of cost and quality.

• Other terminal blocks
• Electrical equipment parts
• inverter

The system reduces accidents during low-speed operations, especially when reversing, to prevent contact and entrapment with street cleaning vehicles. This system is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global ultrasonic sensor market and is manufactured at its overseas factories. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and there have been over 6,000 units supplied for trucks and buses within six years of its launch. It is a sonar system for buses and trucks, consisting of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of configuring up to 8 channels. There are numerous installation records for various domestic trucks (large, medium, and small) as well as imported trucks. The basic configuration of the system has two types: - An on-screen display type that shows detection distance with backup monitor interruption. - A dedicated LED indicator display type. The basic sensor configurations are 2 channels, 4 channels, 6 channels, and 8 channels. The basic installation positions are 2 channels in the front and 6 channels in the rear (2 channels on the upper side / 4 channels on the lower side). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V systems.

• Sensors
• Electrical equipment parts
• Other Auto Parts

The system reduces the risk of collision accidents in situations where the work basket of a high-altitude work vehicle is moving at low speed (while the basket is stored) due to the driver's negligence. *If sensors are installed in the basket, a 12/24V power supply is required inside the basket. This system is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global market for ultrasonic sensor elements and is manufactured at its own overseas factory. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and there have been over 6,000 units supplied for trucks and buses within six years of the start of supply. This is a sonar system for buses and trucks, composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of up to 8 channels. It has a proven track record of installation on various domestic trucks (large, medium, and small) as well as imported trucks. The basic configuration of the system has two types: - On-screen display type that can show detection distance with backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch in the front and 6ch in the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V.

• Sensors
• Electrical equipment parts
• Other Auto Parts

Reduce the risk of collision accidents in situations where there is a danger of contact at the upper front of box vehicles (during low-speed driving). When driving at low speeds within the premises, such as at dockyard gates and shutters, it can help mitigate collision accidents that occur when drivers forget the size of their vehicle during final approach. The ultrasonic sensors and controllers used are designed and developed by a domestic manufacturer with a 60% share in the global market and are produced in their own factory. To minimize false alarms from the sensors, a dedicated controller with a unique algorithm is incorporated, achieving over 6,000 units for trucks and buses in six years. There are numerous installation records for trucks (large, medium, and small) from various domestic companies as well as imported trucks. The basic system configuration consists of two types: - On-screen display type that shows detection distance with backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch upper / 4ch lower). The sensor angles can be adjusted in some cases. *Compatible with both 12V and 24V systems. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

When driving at low speeds within the premises, such as near dockyard gates and shutters, it can reduce the risk of collision accidents that occur when drivers forget the size of their vehicles during final approach. It mitigates collision accidents in situations where there is a risk of contact with the upper front of box trucks (during low-speed driving). The ultrasonic sensors are designed and developed by a domestic manufacturer with a 60% share in the global market and are produced in their own factory. The controller is a specially designed unit incorporating a unique algorithm, with over 6,000 units installed for trucks and buses in six years. There are numerous installation records for trucks (large, medium, and small) from various domestic companies as well as imported trucks. The basic configuration of the system consists of two types: - On-screen display type that shows detection distance with backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch upper / 4ch lower). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V systems. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

This system reduces the risk of accidents when entering a dockyard dog shelter at low speed during reverse and mitigates collision accidents in situations where there is a danger of contact with the upper front of a box truck (at low speeds). It is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global ultrasonic sensor market and is manufactured at its overseas factories. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and there have been over 6,000 units supplied for trucks and buses within six years of its launch. This is a sonar system for buses and trucks, composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of configuring up to 8 channels. It has a proven track record of installation on various domestic trucks (large, medium, and small) as well as imported trucks. The basic configuration of the system consists of two types: - On-screen display type that shows the detection distance with backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch upper / 4ch lower). The sensor angles can be adjusted in some cases. *Compatible with both 12V and 24V systems. If requested, vehicle installation can also be carried out by partner companies with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

High resilience ethylene propylene diene monomer (EPDM) rubber, when used as airtight seals for equipment handling powders or waterproof seals for liquids, exhibits extremely low compression deformation even after prolonged use, ensuring that the seals do not "sag." By utilizing this feature, it becomes possible to significantly reduce the frequency of seal replacements in hard-to-maintain areas deep within machinery. As a material, EPDM excels in chemical resistance, cold resistance, ozone resistance, and aging resistance. Its inherent elasticity as sponge rubber, combined with its non-sagging characteristics and consistent load response, allows it to also be used as "damping material." High resilience rubber sponge has extremely low permanent deformation, providing excellent shape retention, and it returns instantly to its original form even after being subjected to pressure for an extended period. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below the measurement limit - Flame retardant/oil resistant grade (railway flame retardant compliant) * Custom cutting to required lengths available, with adhesive tape for delivery - Instantly restores from a compressed state - High shape retention - Extremely low permanent deformation - Soft sponge suitable for a wide range of applications

• Rubber
• Water Hydraulic Equipment
• Food Processing Equipment

The camera module, which incorporates a lens array into a single camera, automatically generates high-resolution depth maps of up to 1.4 million pixels in a compact form using a unique algorithm. It can create 3D images and 3D objects with a monocular camera. There are also types available that can handle very close distances of about 10 cm if needed. It achieves high-precision measurement values of less than 1% within 1 meter and about 3% at 4 meters. With a simple single-camera configuration, it is modularized and supports various modules suitable for compact, low-power applications, as well as customization to meet specific needs. Evaluation kits (EDK) are also available for purchase. The measurement distance varies depending on the type of lens, so we will respond based on the requirements of your application. Configuration: apiCAM (Application Processing Interface) Camera module SDK for operation on PC Manual (Some cables and stands are also included) Domestic distributor in Japan: Yashima Denso Co., Ltd.

• Sensors
• Virtual Reality Related
• Other optical parts

The biomass material developed in-house by VASU Corporation (a Hong Kong capital enterprise) is derived from biomass (cornstarch) and is patented. In Japan, many biomass resins are often used for flexible packaging and bottles, and there are challenges such as coloring, odor, and strength in biomass resins for injection molding. VASU's materials include grades suitable for injection molding, featuring excellent moldability, coloring performance, strength, cost, and reduced CO2 emissions during combustion based on actual measurements. Yashima Densou is the official domestic distributor for VASU, acting as a technical trading company that supports everything from resin materials to mass production of molds and molded products. It is possible to supply the material as well as provide finished products. Among the 12 target items, some are available for sample provision: Forks, spoons, straws, hairbrushes, toothbrushes, hangers, knives, stirrers, combs, razors, shower caps, clothing covers. ☆ Environmental Standards RoHS, REACH, FDA, DIN EN 13432 (biodegradable), compliance with Ministry of Health, Labour and Welfare Notification No. 370, JORA Biomass Mark The above items are either compliant or planned for compliance.

• Organic Natural Materials
• plastic
• Composite Materials

The biomass material developed in-house by VASU Corporation (a Hong Kong capital enterprise) is a resin material derived from biomass (corn starch) for which it holds a patent. Yashima Denso is a technical trading company that serves as the official domestic agent for VASU, providing support from resin materials to mass production delivery of molds and molded products. *Mold design and quality are supported by dedicated technical staff. In Japan, much of the biomass resin is often used for flexible packaging and bottles, and there are challenges such as coloring, odor, and strength in biomass resins for injection molding. VASU's materials offer grades suitable for injection molding, featuring excellent moldability, coloring performance, strength, cost, and reduced CO2 emissions during combustion based on actual measurements. Among the 12 targeted items, some samples are available for provision: Forks, spoons, straws, hairbrushes, toothbrushes, hangers, knives, stirrers, combs, razors, shower caps, clothing covers. ☆Environmental Standards RoHS, REACH, FDA, DIN EN 13432 (biodegradable), compliance with Ministry of Health, Labour and Welfare Notification No. 370, JORA Biomass Mark The above items have been addressed or are planned to be addressed.

• Organic Natural Materials
• plastic
• Composite Materials

The camera module, which incorporates a lens array into a single camera, automatically generates high-resolution depth maps of up to 1.4 million pixels in a compact size using a unique algorithm. It can create 3D images and 3D objects with a monocular camera. It achieves high-precision measurements of less than 1% within 1 meter and about 3% even at 4 meters. The module is designed in a simple single-camera configuration, making it compact and low power consumption. We also offer various modules tailored to applications and customization to meet specific needs. Evaluation kits (EDK) are also available for purchase. The measurement distance varies depending on the type of lens, so we will respond based on the customer's application requirements. Configuration: apiCAM (Application Processing Interface) Camera module : SDK for operation on PC : Manual : (Includes some cables and stands, etc.) Domestic distributor in Japan: Yashima Denso Co., Ltd.

• Sensors
• Virtual Reality Related
• Other optical parts

The module, equipped with a unique algorithm and a monocular camera configuration, generates a depth map that is overwhelmingly smaller than conventional methods, with a maximum size of 1.4 million pixels. It achieves high-precision measurements of less than 1% within 1 meter and about 3% even at 4 meters, enabling high-functionality recognition. The simple camera configuration is modular, compact, and low power consumption. We also offer various modules compatible with applications and can accommodate customizations based on customer needs. A dedicated evaluation kit (EDK) is also available for purchase. The measurement distance varies depending on the type of lens, so we will respond based on the requirements of your application. Configuration: apiCAM (Application Processing Interface) Camera module : SDK for operation on PC : Manual : (Includes some cables and stands, etc.) Domestic distributor in Japan: Yashima Densou Co., Ltd.

• Sensors
• Virtual Reality Related
• Other optical parts

Our unique algorithm and single camera module enable the generation of an overwhelmingly compact depth map with a maximum size of 1.4 million pixels. We achieve high-precision measurements of less than 1% within 1 meter and around 3% at 4 meters, allowing for advanced recognition capabilities. The system is modular with a simple single-camera configuration, supporting various modules for compact and low-power applications, and we also accommodate customization based on customer needs. 3D images and 3D objects are generated using a monocular camera. Evaluation kits (EDK) are also available for purchase. The measurement distance varies depending on the type of lens, so we will respond based on the requirements of your application. Configuration: apiCAM (Application Processing Interface) Camera module SDK for operation on PC Manual (Includes some cables and stands as well) Domestic distributor in Japan: Yashima Densou Co., Ltd.

• Sensors
• Virtual Reality Related
• Other optical parts

Four Strengths - Functionality equivalent to petroleum-based plastics - Low cost - High biomass content (60%) - 20% reduction in CO2 emissions [Functionality equivalent to petroleum-based plastics] It has moldability, convenience, strength, and quality comparable to petroleum-derived plastics, providing similar functionality. [Low cost] In terms of cost, it is about 1.5 times that of plastic (PP), making it cheaper than bioplastics. [High biomass content (60%)] With a biomass content of 60%, it reduces the use of finite resources from petroleum-derived plastics by 60%, marking a first step towards environmental measures and reducing plastic usage. [CO2 emissions reduction effect] In Japan, waste disposal is mainly through incineration, including plastics. Incineration results in CO2 emissions, which are a significant environmental issue. This cushioning material reduces CO2 emissions during combustion by about 20% compared to plastic (PP), as verified by CERI (Chemical Evaluation and Research Institute). This is not just a theoretical concept of carbon neutrality; the actual reduction effect has been recognized.

• Cushioning material
• tray
• Packaging Bags

The material is a resin developed in-house by VASU Corporation (a Hong Kong capital enterprise) from biomass sources (corn starch), for which it holds a patent. Yashima Densou serves as the official domestic agent for VASU Corporation, acting as a technical trading company that handles everything from resin materials to mass production delivery of molds and molded products. *Dedicated technical staff for mold design and quality assurance will provide support. Currently, in Japan, much of the biomass resin is often used for flexible packaging and bottles, and there are challenges such as coloring, odor, and strength with biomass resins for injection molding. However, the characteristics of VASU's injection resin include high moldability (ease of molding), coloring performance, strength, price, and a reduction in CO2 emissions during combustion based on actual measurements, which can address the current challenges. ☆Environmental Standards RoHS, REACH, FDA, DIN EN 13432 (biodegradable), compliance with Ministry of Health, Labour and Welfare Notification No. 370, JORA Biomass Mark The above items have been addressed or are planned to be addressed.

• Organic Natural Materials
• plastic
• Composite Materials

Compared to using PE and PP as fuel, it is possible to reduce actual CO2 emissions by approximately 30%. Tests were conducted by the Japan Chemical Substance Evaluation and Research Institute. Test results from tests conducted in accordance with JIS K 2541-3:2003: 2.2 g/g VASU, a Hong Kong-based company, is a materials manufacturer that has developed its own bio-based (corn starch) and biodegradable resin materials and holds patents for them. Yashima Densou, as the official domestic distributor for VASU, is a technical trading company that handles everything from resin materials to mass production delivery of molds and molded products. *Dedicated technical staff for mold design and quality assurance will provide support. ☆Environmental Standards RoHS, REACH, FDA, DIN EN 13432 (biodegradability), compliance with Ministry of Health, Labour and Welfare Notification No. 370, JORA Biomass Mark The above items have been addressed or are planned to be addressed.

• Cushioning material
• tray
• Packaging Bags

This is biomass plastic that can be processed as combustible material. Four strengths: - Functionality equivalent to petroleum-based plastics - A first step towards reducing plastic use - CO2 emission reduction effect - Low cost 【Functionality equivalent to petroleum-based plastics】 It has moldability, convenience, strength, and quality comparable to petroleum-derived plastics, providing similar functionality. 【A first step towards reducing plastic use】 With a biomass content of 40%, it reduces the use of finite petroleum-derived plastics by 25%, making it a first step towards environmental measures and reducing plastic use. 【CO2 emission reduction effect】 In Japan, waste disposal is primarily through incineration, including plastics. Incineration results in CO2 emissions, which are considered an environmental issue. The cushioning material introduced here reduces CO2 emissions during combustion by about 25% compared to plastic (PP), as verified by CERI (Chemical Evaluation and Research Institute). This is not just a theoretical concept of carbon neutrality; the actual reduction effect has been recognized. 【Low cost】 In terms of cost, it is approximately 1.5 times that of plastic (PP), making it inexpensive for bioplastics.

• Cushioning material
• tray
• Packaging Bags

Four Strengths - Functionality equivalent to petroleum-based plastics - Low cost - Biomass content (20%) - 20% reduction in CO2 emissions [Functionality equivalent to petroleum-based plastics] It has moldability, convenience, strength, and quality comparable to petroleum-derived plastics, offering similar functionality. [Low cost] In terms of cost, it is approximately 1.5 times that of plastic (PE) and is cheaper than bioplastics. [Biomass content (20%)] With a biomass content of 20%, it reduces the use of finite resources from petroleum-based plastics by 20%, marking a first step towards environmental measures and reducing plastic use. [CO2 emissions reduction effect] In Japan, waste disposal primarily involves incineration, including plastics. Incineration results in CO2 emissions, which are considered an environmental issue. This cushioning material reduces CO2 emissions during combustion by about 20% compared to plastic (PP), as verified by CERI (Chemical Evaluation and Research Institute). The reduction effect is recognized in practice, not just in theory regarding carbon neutrality.

• Cushioning material
• tray
• Packaging Bags

The material developed by VASU Corporation (a Hong Kong capital enterprise), which is a material manufacturer, is a bio-based (corn starch) and biodegradable resin material for which they hold a patent. Additionally, the plants used as raw materials are non-GMO, have ultra-high molecular weight, and low MFR, and do not contain harmful additives, making them safe for applications that come into direct contact with food. Yashima Denso is a technical trading company that serves as the official domestic agent for VASU Corporation, handling everything from resin materials to mass production and delivery of molds and molded products. *Dedicated technical staff for mold design and quality assurance will provide support. ☆Environmental Standards RoHS, REACH, FDA, DIN EN 13432 (biodegradable), compliance with Ministry of Health, Labour and Welfare Notification No. 370, JORA Biomass Mark, CERI CO2 emissions The above items have been addressed or are planned to be addressed. Currently, in Japan, much of the biomass resin is often used for flexible packaging and bottles, and there are challenges with biomass resins for injection molding, such as coloring, odor, and strength. However, the characteristics of VASU Corporation's injection resins include high moldability (ease of molding), coloring performance, strength, price, and a reduction in CO2 emissions during combustion based on actual measurements, which can address the current challenges.

• Organic Natural Materials
• plastic
• Composite Materials

High resilience ethylene propylene diene monomer (EPDM) ensures that even with long-term use as a waterproof packing, it "does not lose its shape"! By utilizing this feature, it is possible to significantly reduce the frequency of packing replacements. As a material, EPDM excels in chemical resistance, cold resistance, ozone resistance, and aging resistance. Its inherent elasticity as sponge rubber, combined with the characteristic of "not losing shape" and a certain load response, allows it to be utilized as a "damping material." High resilience rubber sponge has an extremely small permanent deformation strain, providing excellent shape retention. Even after being subjected to pressure for an extended period, it returns to its original shape instantly once released. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below the measurement limit - Flame retardant/oil resistant grade (railway flame retardant compliant) * Custom cutting to required lengths available, with adhesive tape for delivery - Instantly restores from a compressed state - High shape retention - Extremely small permanent deformation strain - Soft sponge suitable for a wide range of applications

• Rubber
• Vehicle body parts
• Other machine elements

Long-term use of sponge rubber, which tends to "flatten out," required regular replacement, but high resilience rubber sponge does not "flatten" even with long-term use. Utilizing the inherent elasticity of sponge rubber along with the characteristic of "not flattening" and a certain load response, it can be used as a "damping material." High resilience rubber sponge has an extremely small permanent deformation strain, making it excellent in shape retention, and it instantly returns to its original shape even after being released from a state of continuous pressure over a long period. - Features - ・Instant recovery from a compressed state ・High shape retention ・Extremely small permanent deformation strain ・Soft sponge suitable for a wide range of applications ・High weather resistance with EPDM (ethylene propylene rubber) ・Operating temperature range -20 to +80°C ・Sulfur-free grade with free sulfur measured below the detection limit ・Flame retardant/oil resistant grade (railway flame retardant compliant) *Custom cutting to required lengths is available, and delivery can include adhesive tape.

• Rubber
• Vehicle body parts
• Other machine elements

Plastic magnets (bond magnets) used in automotive steering and switch areas, which incorporate magnetic sensors, are easier to handle, lightweight, and less affected by rust compared to metal sintered magnets, making them excellent in properties. The base resin materials can be selected according to applications and needs, including nylon-based and PPS, and complex shapes can be molded through insert molding and two-color molding. We can accommodate multipole magnetization and radial magnetization, providing comprehensive proposals for materials, properties, and shapes, and we will mass-produce them in domestic lines with proven mass production results.

• Sensors
• Flight control parts
• magnet

DC axial fans, brush motor type, brushless motor type. Waterproof and dustproof electric fans for heavy-duty applications such as automobiles and construction machinery. 12V, 24V. All processes from raw materials to products are managed in Italy, and production is carried out in our own factory located in Italy. We also have quality evaluation capabilities and can conduct assessments in-house. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and high airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120℃ - Low noise, excellent vibration resistance, and harshness With the electrification of direct drive fans, they are adopted in construction machinery, agricultural machinery, large commercial vehicles, and buses that require measures for exhaust gas regulations and fuel efficiency improvements. All motors certified with IP68 are waterproof (WP) and are completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system